FCC ID: 2AX2J-PBEVR PBEVR

31 Hudson Yards New York, NY 10001 EVR01/02/03 True Wireless Earbuds Quick Start Guide (EN) Whats in the box Earbuds (L/R) Charging Case Eartips (S/M/L/S+/M+/L+) USB Type C Cable (5V/2A) Quick Start Guide Connecting Your Device 1) Enable bluetooth on your device. 2) Opening the case turns the earbuds on and enter pairing mode. 3) Select Planet Beyond EVR on your phone to pair. Powers down after 3 minutes of inactivity. Press and hold to power on. Charging case battery level:

More than 70%: Green Between 31% -70%: Orange Between 11% - 30%: Red Less than 10%: Flashing Red While the case is being charged, the light will blink in its respective colour. Once it is fully charged, it will stop blinking. Charging the case 1) Connect the USB-C cable to the port at the back of the charging case. 2) The casing and earbuds can be charged simultaneously. Works with Qi-certified wireless charger. Multi-functional Button Controls Music Playback Control Left:

Press 1X: Play / Pause Press 2X: Previous Track Long Press: Volume Down Right:

Press 1X: Play / Pause Press 2X: Next Track Long Press: Volume Up Calls and Smart Assistant Control Press 1X: Answer / Hang Up Call Press 2X: Reject Call Press 3X: Siri / Google Assistant Earbuds battery level:

A low battery tone will sound when the battery level low. Status in charging case:

Charging: Breathing white light Fully charged: Light off Storing the accessories The casing is able to slide in both directions. To store your accessories, slide the casing downwards and slot the accessories into the compartment. Ensure that the accessories sit nicely inside the case. If it sticks out, it will affect the closing of the case. Charging Case Light Indicators Earbuds Battery Level Indication Scan here from instructional videos and warranty registration. Main Office: Planet Beyond LLC 31 Hudson Yards New York, NY 10001 FCC ID: 2A3P7-PBEVR FCC ID: 2A3P7-PBEVR EVR01/02/03 True Wireless Earbuds Quick Start Guide (EN) Technical Specifications Driver diameter: 8.0mm Frequency response: 20-20kHz Sensitivity: 103 dB (at 1kHz) Impedance: 32 ohms Battery (Earbud L/R): 3.7V, 60mAh Battery (Charging Case): 3.7V, 750mAh Battery life (Earbud): up to 8 hours Battery life (with Charging Case): up to 48 hours Weight of Earbud: about 8.5g (L), about 8.5g (R) Weight of Charging case: about 60g Operating temperature: 0-70 degrees Microphone Sensitivity: -42dB Microphone Frequency Response: 100Hz - 10kHz Operating Frequency: 2402 - 2480MHz RF Output Power: <3.25dBm Bluetooth Version: 5.2 Operating Range: up to 10 meters USB cable for charging: USB Type A USB Type C Eartips: S, M, L, S+, M+, L+

FCC Caution (FCC ID: 2AX2J-PBEVR) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

*RF warning for Portable device:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

PLANET Model: PBEVRO1 B=YOND Made in China Main Office: Planet Beyond LLC 31 Hudson Yards New York, NY 10001 Battery (Earbud L/R): 3.7V, 6(0mAh D5 Battery (Charging Case): 3.7V, 750mAh |

ln

C5266091_X10_Ed.2 Planet Beyond LLC Date: 2021-12-06 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2AX2J-PBEVR To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No NOTE 1 NOTE 1 No No Short-Term Confidentiality NOTE 2 No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of above are withheld from public view for a period of Grant of Equipment Authorization and prior to marketing. short-term Confidentiality, the applicant requests the exhibits selected days from the date of the It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, 1/1 C5266091_X10_Ed.2 Name: Christian Melvin Signature:

Title:

1/1

C5266091_X8_Ed.1 Letter of Authorization Planet Beyond LLC Company: Planet Beyond LLC Address: 31 Hudson Yards New York, NY 10001 Product Name: PBEVR Model Number: PBEVR01,PBEVR02,PBEVR03 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Christian Melvin Date: 2021-12-06 Signature of applicant:

Title:

1/1

Declaration on model difference We, Planet Beyond LLC, the undersigned hereby confirm that these models are identical, and all models have the same RF module and Antenna, except for color of enclosure and model No. for trading purpose. Product name PBEVR Model No. PBEVR01,PBEVR02,PBEVR03 Trade name N/A FCC ID INPUT 2AX2J-PBEVR 3.7V-4.2V Confirmed by:

Clients signature:

Date:2021-12-06 Clients name / title: Christian Melvin Page 1 of 1