ITEM # 3155 WORRY PND OD NOW ADD CL OR PRO MEARE. Full Function 9.6V Ni-Gd AMIDA ECAC Radio Control Skateboarder eh
* IMPORTANT: IF SKATEBOARDER DOES NOT RESPOND PROPERLY, PLEASE REPLACE THE 9.6V NI-CD BATTERY PACK. THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. PLEASE DO NOT RETURN TO STORE For more information or questions, please call Consumer Services: _ 1-877-FUN-TOYS sry ti
(1-877-386-8697) NY. NY eee Colors and decorations may vary. All Rights Reserved MADE IN CHINA Keep content details for future reference. www.planettoys.com a TABLE OF CONTENTS PAGE 1: Table of Contents. PAGE 2: Features. PAGE 3: Checklist. PAGE 4: Charging the 9.6V Ni-Cd 600 MAH Battery Pack. PAGE 5: Installing the 9.6V Ni-Cd 600 MAH Battery Pack. PAGE 6: Controller Battery Installation. PAGE 7: Skateboarder Power On/Off Switch and Antenna Installation. PAGE 8: Operating the Skateboarder: Proper Use, Precautions, & Care. PAGE 9: To Clean Skateboarders Shirt Page 10: Cautions and Warnings. Page 11: Please Note and Troubleshooting.
*The adaptor should be periodically examined for conditions that may result in fire, electric shock, or ones to persons. If such conditions exist the adaptor should not be used until it is properly repaired. Ready to Run!
Radio Controlled: Speed, Direction, & Body Movement!
Ages 8+
2 Frequencies to choose from!
Rides on Pavement and Smooth Surfaces!
* Up toa 100 Feet Range!
Pistol Shaped Controller. Rechargeable Battery &
Charger included!
OV Battery for Charger Included. fo CHECKLIST CHARGING THEBATTERY PACK IMPORTANT: THE INCLUDED 9.6V Ni-Cd BATTERY PACK IS NOT CHARGED PRIOR TO SHIPMENT AND MUST BE CHARGED BEFORE USE. To prevent damage, the contents of the package that are listed below have been packed in the tray and may be out of plain sight. Please remove all contents from the tray. Skateboarder 9V Battery K Controller Transformer 9.6V Ni-Cd Metal rechargeable Antenna battery pack Tube 600MAH x1 IMPORTANT: THE INCLUDED 9.6V Ni-Cd BATTERY PACK IS NOT CHARGED PRIOR TO SHIPMENT AND MUST BE CHARGED BEFORE USE. Standard , _ 110/120 V Household __ Electrical Outlet Transformer |
1. First, plug the tranformer into a standard household electrical outlet. Wire Connector 9.6 V Ni-cd Rechargeable Battery Pack 600mah 2. Plug the battery wire connector and transformer together. 3. Charge the battery pack for 5 hours. When the battery pack feels warm it is fully charged. NOTE: LEAVING THE BATTERY PACK IN THE CHARGER WILL NOT INCREASE THE LIFE OF YOUR BATTERY. 4. After charging the battery pack, aswell as during its use, it will become warm. IMPORTANT: Please allow the Battery Pack to cool prior to recharging. Charging before doing so will greatly reduce the life of the Battery. El INSTALLING THE BATTERY PACK CONTROLLER BATTERY INSTALLATION Battery Installation Procedure:
1.Unscrew the battery cover using a Philips head screwdriver. 2. Lift the battery cover off the battery compartment unit. H-_ 3. Plug in the 9.6V Ni-Cd Rechargeable battery pack into the white connector piece. 4.Once the battery pack is secure, place the cover back on the battery compartment unit and screw the battery cover completely back on. Battery Compartment 1.Unscrew battery cover using a Philips head screwdriver. 2. Lift Battery cover off. 3. Plug th 9V battery into battery box. 4. Screw battery cover completely back on. CONTROLLER ANTENNA INSTALLATION Screw the antenna into the controller, THE ANTENNA PROVIDED IS A UNIQUE ANTENNA. BY INSTALLATION OF UNAUTHORIZED ANTENNA TO THIS EQUIPMENT. SUCH UNAUTHORIZED INSTALLATION COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. POWER ON/OFF Power On/Off SKATER Turn the Skateboarder on by flicking the swith on the bottom of the Skate Board into the ON position. REMOTE Turn on the switch. The red LED should light up if the battery is properly connected. Steering Wheel LED will light when controller is ON. Forward PROPER USE, PRECAUTIONS, & CARE FCC CAUTION:
The manufacturer is not responsible for the radio interference caused by unauthorized frequency modification to this equipment, Such modifications could void the user's authority to operate the equipment, ao Best away from high voltage power lines, large buildings, and walls. 2.Hold the Controller antenna up for the best performance. 3.When the product doesn't respond, slows down, or loses range, replace the batteries. 4. Some owners choose to obtain one or more 9.6V Ni-Cd batteries to \
extend usage.
= 10 CLEAN SKATEBOARDERS SHIRT CAUTIONSS WARNINGS 1.Remove T-shirt entirely by pulling the velcro on the back of the skateboarders t-shirt. (See figures A, B, and C). 2. Hand wash T-shirt in COLD water with mild soap to remove any dirt or stains. 3.DO NOT put the T-shirt back onto the Skateboarder until it is completely drY. CAUTION:
DO NOT operate the Skateboarder where there is debris as it may cause damage to the toy. AVOID hard crashes. NEVER ive the Skateboarder or its controller to any child under the age of 3 years old, as the toy contains small parts. DO er allow the antenna to get wet, as this will effect the distance of the control. _e use chemicals like benzene, alcohol, or thinner to clean the Skate-
oaraer. WHEN not in use, remove the batteries from the controller and skateboarder. Under NO circumstance should the 9.6V Ni-Cd Battery or the provided 9V battery be disposed of in a fire. This may cause ao injury, and/or explosion. Please dispose of Ni-Cd battery cells properly. DO NOT stall the motor during use. NEVER P= the charger and the 9.6V Rechargeable battery near flammable material while charging, this may cause a fire. The batteries get hot after use, please do not handle them immediately after use. Please wait a little while before handling them. DO NOT recharge the battery pack if its warm to the touch. Allow the battery ack to cool before recharging. Recharging a warm battery pack will shorten he life of the pack. Recharging batteries should be done by an adult only. DO NOT charge a damaged, leaking, hot, or wet battery pack. DO NOT break or dissassemble battery pack. DO NOT use the oy pack or charger for any other reason other than charging and running the Board Sharks Skateboarder. pichbrac not in use, the transformer should be unplugged from the electrical outlet. WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation of the device. E PLEASE NOTE & TROUBLESHOOTING PLEASE NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation, This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is needed.
- Consult the dealer or an experienced radio/TV technician for help TROUBLE SHOOTING Reasons Solutions The batteries inside the radio control are too weak. Replace the new alkaline batteries inside the control unit. Problems | There is a weak or low reception for the radio control. The battery inside the Replace the new alkaline batteries Skateboarder is too weak. inside the Skateboarder. The Skateboarder doesn't Try playing at another locati respond to the radio control. ry Psy ing BL anciner Oceano:
Some other equipment using Other the same radio frequency could disrupt the radio control. Either play in another location or turn off the other equipment. if you are planning to race your skateboarder with a friend, make sure each person's Skateboarder is on a different frequecny. The radio control's frequency is disrupted by something around the environment.