FCC ID: AL8-WH3X0XD1 900MHz Monaural and Binaural Headsets

1 Charge Headset 1 Plug one end of power supply into power jack on back of the base and other end into working power outlet. 2 Connect Desk Phone 1 Connect cables from desk phone to base. NOTE You may also call the automated sound test at 800-317-8308. Its the quickest way to test and optimize your system. System Features 4 End call by pressing headset call control button and hang up the handset. Troubleshooting Tip: If you do not hear a dial tone, adjust the slide switch

(AG) until you do. Default setting A works for majority of desk phones. 2 To charge, dock headset in base for minimum of 20 minutes.

=

20 3 Make a Call 1 While wearing headset, tap call control button. 2 Remove the desk phone handset. 3 Dial test call from desk phone. NOTE For remote call control capability (HL10 lifter or EHS cable), see plantronics.com/accessories. 1 2 43 1 Volume down button (-) Tap 2 Call control button Answer/end call Tap 3 Mute button Tap (base LED solid red) 4 Volume up button (+) Tap 5 Narrowband/wideband audio switch NEED MORE HELP?

Technical support plantronics.com/support Online user guide http://docs.plantronics.com/cs500 Black Narrowband Audio Yellow Wideband Audio (desk phone must be capable of wideband audio) NOTE Talk time will be reduced when operating in wideband mode. 6 Auto answer switch Black (off) Tap call control button to place or answer call Gray (on) Lift headset from base to place or answer call Your CS510-XD/CS520-XD consists of a C052-XD1 base and a WH300-XD1/WH350-XD1 headset. Plantronics, Inc. 345 Encinal Street Santa Cruz, CA 95060 United States 2017 Plantronics, Inc. All rights reserved. Plantronics, CS510-XD, CS520-XD, C052-XD1, WH300-XD1, WH350-XD1, EHS, and HL10 are trademarks or registered trademarks of Plantronics, Inc. All other trademarks are the property of their respective owners. Patents US 7,633,963, 9,008,319; D538,785; D535,285; D669,888; BR DI71026967; CN 201130145424.4; EM 00543798-0004; 000543798-0005; 001865510-0001; IN 236857; KR 30-671183; TW D117515;

D117333; and D147376. 1 Cmo cargar el audfono 2 Cmo conectar el telfono de escritorio 1 Enchufe un extremo del suministro elctrico en el conector hembra en la 1 Conecte los cables del telfono de escritorio a la base. parte trasera de la base y el otro extremo en la salida del tomacorriente que est funcionando. NOTA Tambin puede llamar para realizar la prueba de sonido automtica al. Es la manera ms rpida de probar y optimizar su sistema. Funciones del sistema 4 Para finalizar la llamada, presione el botn de control de llamadas de los auriculares y cuelgue el tubo. Consejo para la resolucin de problemas: Si no escucha un tono de marcar, ajuste el conmutador deslizante (AG) hasta que lo haga. El ajuste preconfigurado A funciona para la mayora de los telfonos de escritorio. CS510-XD/CS520-XD Wireless Headset System Designed in Santa Cruz, California Gua de inicio rpido Guide de dmarrage rapide QUICK START GUIDE BC CS510-XD/CS520-XD Sistema de auriculares inalmbricos Diseado en Santa Cruz, California 2 Para cargar, coloque los auriculares en la base durante 20 minutos como mnimo.

=

20 3 Cmo hacer una llamada 1 Con los auriculares colocados, toque el botn de control de llamadas. NOTA Para la funcin de control de llamadas remotas (dispositivo para descolgar el telfono HL10 o cable EHS), consulte plantronics.com/accessories. GUA DE INICIO RPIDO 88965-13 Rev D 12.17 2 Levante el tubo del telfono de escritorio. 3 Realice una llamada de prueba desde el telfono de escritorio. NECESITA MS AYUDA?

Asistencia tcnica plantronics.com/support Gua del usuario en lnea http://docs.plantronics.com/cs500 1 2 43 1 Botn para bajar el volumen (-) Tocar 2 Botn de control de llamadas Responder/finalizar llamada Tocar 5 6 3 Botn de silencio Tocar (base LED en color rojo slido) 4 Botn para aumentar el volumen (+) Tocar 5 Interruptor de audio de banda ancha/estrecha Negro: audio de banda estrecha Amarillo: audio de banda ancha (el telfono de escritorio debe tener capacidad para audio de banda ancha) NOTA Se reducir el tiempo de conversacin al operar en modo de banda ancha. 6 Respuesta automtica Conmutador Negro (apagado) Toque el botn de control de llamadas para realizar o responder una llamada Gris (encendido) Levante los auriculares de la base para realizar o responder una llamada Su CS510-XD/CS520-XD incluye una base C052-XD1 y unos auriculares WH300-XD1/WH350-XD1. Plug the AC adapter or charger into an outlet that is near the equipment and will be easily accessible. Never store or use the product or charge the battery where the temperature may fall below 0C (32F) or rise above 40C (104F). Headset Battery Warnings To avoid the risk of explosion, fire or leakage of toxic chemicals, please observe the following warnings:

Do not dispose of the product or battery in a fire or heat above 40C (104F). Do not open, deform or mutilate the battery. There may be corrosive materials which can cause damage to eyes or skin and may be toxic if swallowed. Always store batteries where children cannot reach them. If your product has a replaceable battery, use only the battery type supplied by Plantronics. Remove a spent battery promptly. Do not allow any battery or its holder to contact metal objects such as keys or coins. RECYCLING: Your headset and/or the battery must be recycled or disposed of properly. Contact your local recycling center for proper disposal of your headset. NOTE For instructions on placing this product in test mode for battery charger efficiency testing, please contact Plantronics at 1-855-765-7878. FCC Requirements Part 15 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Registration Information Part 68 This equipment complies with Part 68 of the FCC rules and the requirements adopted by ACTA. On the exterior of this equipment is a label that contains a product identifier in the format US:AAAEQ##TXXXX. If requested, this information must be provided to your telephone company. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible jack that is also compliant. See installation instructions for details. The REN is useful to determine the quantity of devices you may connect to your telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of devices you may connect to your line, as determined by the REN, contact your local telephone company. For products approved after August 8, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without the decimal point. (For example, 03 represents a REN of 0.3.) For earlier producers, the REN is separately shown on the label. If this telephone equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isnt practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the proper functioning of your equipment. If they do, you will be notified in advance in order for you to make necessary modifications to maintain uninterrupted service. If trouble is experienced with this unit, for repair or warranty information, please contact customer service at (800) 544-4660. If the equipment is causing harm to the network, the telephone company may request that you disconnect the equipment until the problem is resolved. DO NOT DISASSEMBLE THIS EQUIPMENT: it does not contain any user-serviceable components. We recommend the installation of an AC surge arrester in the AC outlet to which this equipment is connected. Telephone companies report that elec-

trical surges, typically lighting transients, are very destructive to customer terminal equipment connected to AC power sources. Exposure to RF Radiation The internal wireless radio operates within the guidelines found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific community. Independent studies have shown that the internal wireless radio is safe for use by consumers. Visit plantronics.com for more information. In order to comply with FCC and IC RF Exposure requirements, the base must be installed and operated such that a minimum separation distance of 20 cm is maintained between the base and all persons during normal operation. The headset complies with FCC radiation limits set forth for an uncon-

trolled environment. NOTE Modifications not expressly approved by Plantronics, Inc. could void the users authority to operate the equipment. Advertencias sobre la carga Utilice nicamente el cargador proporcionado por Plantronics para cargar el producto. No use los cargadores para ningn otro fin. Asegrese de que el voltaje indicado para el producto coincide con el voltaje de la red elctrica que piensa utilizar, por ejemplo 100-240 V; 50/60 Hz; 0.2 A. Cargue el audfono siguiendo las instrucciones suministradas con esta unidad. Conecte el adaptador de CA o el cargador a una toma de corriente prxima al equipo y a la que pueda llegar fcilmente. No guarde ni use el producto, ni cargue la batera, en lugares donde la temperatura pueda bajar a menos de 0C (32F) o subir a ms de 40C (104F). Advertencias sobre la pila del audfono Para evitar el riesgo de explosin, incendio o emisin de sustancias txicas, tome en cuenta las advertencias siguientes:

No tire el producto ni la pila al fuego ni lo exponga a un calor por encima de los 40C (104F). No abra, deforme ni corte la pila. La pila puede contener materiales corrosivos que pueden causar daos oculares o cutneos, o ser txicos si se ingieren. Guarde siempre las pilas en un lugar que est fuera del alcance de los nios. Si el producto tiene una batera que se puede cambiar, use nicamente el tipo de batera suministrado por Plantronics. Retire las bateras gastadas lo antes posible. No permita que la pila ni su soporte entren en contacto con objetos metlicos, como llaves o monedas. RECICLADO: el audfono o la pila incluida se deben reciclar o eliminar de manera adecuada. Pngase en contacto con el centro de reciclado local para desechar correctamente el audfono. Limited Warranty Plantronics offers a one-year limited warranty on this product. In some countries you must register your product to receive warranty services. Please be aware that you may have other rights depending on the laws of the state or country where the product was purchased. We strongly advise you to keep your receipt of purchase in order to prove the date of purchase of this product. To register your product and for warranty terms and conditions, visit our web site at www.plantronics.com/support. Arbitration Agreement Most disputes and claims related to this product, including your use of this product, are subject to the Plantronics, Inc. Arbitration Agreement (Arbitration Terms). Disputes or claims arising or brought in any country of Europe or Africa are not subject to this Arbitration Agreement. The Arbitration Terms along with FAQs related to the arbitration process can be found at www.plantronics.com/us/terms/arbitration-forms/, or can be requested in writing submitted either to: (i) general.counsel@plantronics.com or (ii) Plantronics, Inc., 345 Encinal Street, Santa Cruz, CA 95060, United States of America, Attention: General Counsel. Safety Instructions Please read the following safety and operational instructions before using this product. Please keep these instructions for your reference. When using this product, these basic safety precautions and warnings should be followed to reduce the risk of fire, electric shock, injury to persons and damage to property. Additional warnings may be present on the product, packaging, or in the user instructions. 5 6 General Operating, storage and charging temperature is 0C to 40C (32F to 104F). Warnings Use only those Plantronics products and accessories designed for use with this Plantronics system. CHILDREN. Never allow children to play with the productsmall parts may be a choking hazard. Do not disassemble the product or AC adapter as this may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock or fire when the product is subsequently used. Do not insert anything into the product or charger because this may cause damage to the internal components or cause injury to you. Avoid contact with liquids. Do not locate this product near water, for example, near a bathtub, or sink, in a wet basement, or near a swimming pool to protect against damage to the product or injury to you. Discontinue use of product and contact Plantronics if the product overheats, has a damaged cord or plug, if the product has been dropped or damaged, or if the product has come into contact with liquids. This product should never be placed over or near a heat source and should not be placed in locations which do not have proper ventilation. If you experience a skin irritation after using this product, discontinue use and contact Plantronics. Exposure to high volume sound levels may cause temporary or permanent damage to your hearing. Although there is no single volume setting that is appropriate for everyone, you should always use your headset with the volume set at moderate levels and avoid prolonged exposure to high volume sound levels. The louder the volume, the less time is required before your hearing could be affected. You may experience different sound levels when using your headset with different devices. The device you use and its settings affect the level of sound you hear. If you experience hearing discomfort, you should stop listening to the device through your headset and have your hearing checked by your doctor. To protect your hearing, some hearing experts suggest that you:

1. Set the volume control in a low position before putting the headset on your ears and use as low a volume as possible. 2. Avoid turning up the volume to block out noisy surroundings. Whenever possible, use your headset in a quiet environment with low background noise. 3. Limit the amount of time you use headsets at high volume levels. 4. Turn the volume down if the sound from the headset prevents you from hearing people speaking near you. See plantronics. com/healthandsafety for more information on headsets and hearing. Charging Warnings Use only the charger supplied by Plantronics to charge the product. Do not use the chargers for any other purpose. Ensure that the voltage rating corresponds to the power supply you intend to use, for example 100-240 V; 50/60 Hz; 0.2 A. Charge the headset according to the instructions supplied with the unit. Garanta limitada Plantronics ofrece una garanta limitada de un ao para este producto. En algunos pases deber registrar su producto para recibir los servicios de garanta. Tenga en cuenta que puede disfrutar de otros derechos en funcin de las leyes del estado y pas donde adquiri el producto. Es altamente recomendable que conserve el recibo de compra para comprobar la fecha de compra de este producto. Para registrar su producto y conocer los trminos y condiciones de la garanta, visite nuestro sitio web www.plantronics.com/support. Acuerdo de arbitraje La mayor parte de las disputas y reclamaciones relacionadas con el producto, incluido el uso que usted haga del mismo, se sometern al Acuerdo de arbitraje de Plantronics, Inc. (en adelante, condiciones de arbitraje). Las disputas y reclamaciones que se produzcan en cualquier pas de Europa o frica no estn sujetas a este Acuerdo de arbitraje. Las condiciones de arbitraje, junto con las preguntas ms frecuentes relativas al proceso de arbitraje, pueden encontrarse en plantronics.com/us/terms/arbitration-forms/ o solicitarse por escrito escribiendo a (i) general.counsel@plantronics.com o (ii) Plantronics, Inc., 345 Encinal Street, Santa Cruz, CA 95060, United States of America, Attention: General Counsel. Instrucciones de seguridad Lea las siguientes instrucciones de funcionamiento y seguridad antes de utilizar este producto. Conserve estas instrucciones como referencia. Al utilizar este producto, siga estas advertencias y precauciones de seguridad para reducir el riesgo de incendio, descarga elctrica, lesiones personales y daos a la propiedad. Puede haber advertencias adicionales en el producto, en la caja o en las instrucciones de uso. General La temperatura de funcionamiento y almacenamiento es de 0 C a +40 C (32F a 104F). Advertencias Use nicamente los productos y accesorios Plantronics diseados para utilizarse con este sistema Plantronics. NIOS. No deje nunca que los nios jueguen con el producto; las piezas pequeas pueden ser un riesgo de asfixia. No desmonte el producto ni el adaptador de AC, ya que usted podra quedar expuesto a voltajes peligrosos y a otros riesgos. Si el producto vuelve a armarse de forma incorrecta, se podra producir una descarga elctrica al utilizarlo. No inserte nada en el producto ni en el cargador, ya que podra daar los componentes interno u ocasionarle lesiones. Evite que el producto entre en contacto con lquidos. No coloque este producto cerca del agua, por ejemplo, cerca de una tina de bao o fregadero, en un stano con humedad, o cerca de una alberca o piscina para protegerse contra daos al producto o lesiones a usted. Deje de usar el producto y contacte con Plantronics si el producto se sobrecalienta, si el cable o el enchufe estn daados, si el producto ha sufrido cadas o daos, o si ha estado en contacto con lquidos. Este producto nunca debe colocarse encima o cerca de un radiador, ni en lugares que no cuenten con la ventilacin adec-

uada. Si el uso de este producto le causa irritacin de la piel, deje de utilizarlo y pngase en contacto con Plantronics. La exposicin a niveles de sonido a gran volumen puede ocasionarle daos temporales o permanente a su audicin. Aunque no existe un solo ajuste de volumen apropiado para todo el mundo, utilice siempre sus auriculares con un nivel de volumen moderado y evite la exposicin prolongada a un volumen alto. Mientras ms alto sea el volumen, menos tiempo se necesita para que su odo resulte afectado. El nivel de sonido puede variar cuando se usan los auriculares con diferentes dispositivos. El dispositivo que utilice y su configuracin afectarn al nivel de sonido que escucha. Si siente molestias en los odos, debe dejar de escuchar el dispositivo a travs de los audfonos y acudir a un especialista para que revise su audicin. Para proteger su odo, algunos expertos recomiendan:

1. Ajuste el control de volumen en una posicin baja antes de ponerse los audfonos, y use el volumen ms bajo posible. 2. Evite subir el volumen para ocultar un ambiente ruidoso. Siempre que sea posible, use los audfonos en un lugar tranquilo y con poco ruido de fondo. 3. Limite el tiempo de uso de los audfonos a un volumen elevado. 4. Bajar el volumen si el sonido de los auriculares le impide or a las personas que hablan cerca de usted. Visite plantronics.com/healthandsafety donde encontrar ms informacin acerca de los audfonos y la audicin. CS510-XD/CS520-XD Systme de micro-casque sans fil Conu Santa Cruz, en Californie GUIDE DE DMARRAGE RAPIDE 1 Recharge du micro-casque 2 Connexion au tlphone de bureau 1 Branchez une extrmit du cordon dalimentation dans la prise arrire de la 1 Connectez les cbles du tlphone de bureau la base. base et lautre dans une prise de courant fonctionnelle. REMARQUE Vous pouvez galement appeler le test de son automatis au 1 800-317-8308. Cest la faon la plus rapide de tester et doptimiser votre systme. 4 Terminez lappel en appuyant sur le bouton de contrle des appels du micro-

casque et en raccrochant le combin. Conseil de dpannage : si vous nentendez pas la tonalit, changez la position du bouton coulissant (AG) jusqu ce que vous lentendiez. La configuration par dfaut A fonctionne avec la majorit des tlphones de bureau. Caractristiques du systme 2 Pour recharger le micro-casque, connectez-le la base pendant au moins 20 minutes. REMARQUE Pour la fonction de contrle des appels distance (dcrocheur HL10 ou cble de commutateur lectronique), voir plantronics.com/accessories.

=

20 3 Effectuer un appel 1 Une fois le micro-casque install, appuyez sur le bouton de contrle des appels. 2 Dcrochez le combin du tlphone de bureau. 3 Procdez un appel dessai partir du tlphone de bureau. BESOIN DAIDE SUPPLMENTAIRE?

Soutien technique plantronics.com/support Guide de lutilisateur en ligne http://docs.plantronics.com/cs500 1 2 43 5 6 1 Bouton de rduction du volume (-) 2 Bouton de contrle des appels Appuyer pour rpondre/terminer un appel 3 Bouton discrtion (voyant rouge vif sur la base) 4 Bouton daugmentation du volume (+) 5 Bouton de changement de bande passante audio Noir Bande audio troite Jaune Audio large bande (le tlphone de bureau doit prendre en charge laudio en bande large) REMARQUE : lautonomie de conversation est rduite en mode large bande. 6 Bouton de rponse automatique Noir (arrt), appuyez sur le bouton de contrle des appels pour appeler ou rpondre un appel Gris (marche), soulevez le micro-casque de la base pour appeler ou rpondre un appel Votre CS510-XD/CS520-XD comprend une base C052-XD1 et un micro-casque WH300-XD1/

WH350-XD1. Avertissements relatifs au chargeur Utilisez uniquement le chargeur fourni par Plantronics pour charger le produit. Nutilisez le chargeur aucune autre fin. Assurez-vous que la tension nominale correspond lalimentation que vous voulez utiliser, par exemple 100-240 V;

50/60 Hz; 0,2 A. Chargez le micro-casque selon les instructions fournies avec lappareil. Branchez ladaptateur ou le chargeur c.a. dans une prise suffisamment prs et facilement accessible. Ne rangez ou nutilisez jamais le produit dans un endroit o la temprature pourrait tomber sous 0 C Pile du micro-casque Avertissements Pour viter les risques dexplosion, dincendie ou de fuite de produits chimiques toxiques, tenez compte des avertissements suivants :

Ne jetez pas le produit au feu et ne lexposez pas une chaleur excdant 40 C (104 F). Ne tentez pas douvrir ou de perforer la pile. Elle peut contenir des matires corrosives toxiques pouvant causer des blessures aux yeux et la peau. Gardez toujours les piles hors de porte des enfants. Si votre micro-casque est dot dune pile remplaable, utilisez uniquement la pile livre avec le produit. Retirez rapide-

ment la pile lorsquelle est use. vitez tout contact entre une pile ou un porte-pile et des objets mtalliques, tels que des cls ou de la monnaie. RECYCLAGE : Le micro-casque et les piles doivent tre recycls ou limins de la faon approprie. Communiquez avec le centre de recyclage de votre rgion afin de mettre votre micro-casque au rebut de faon approprie. Industry Canada Regulatory Information This device meets the IC requirements for RF exposure in public or uncontrolled environments. Cet appareil est conforme aux conditions de la IC en matire de RF dans des environnements publics ou incontrle. IC Notice to Users in accordance with current issue of RSS GEN:

This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and 2. this device must accept any interference, including interference that may cause undesired operation of the device Cet appareil est conforme avec Industrie Canada RSS standard exempts de licence (s). Son utilisation est soumise Les deux conditions suivantes:

1. cet appareil ne peut pas provoquer dinterfrences et 2. cet appareil doit accepter Toute interfrence, y compris les interfrences qui peuvent causer un mauvais fonctionnement du dispositive Garantie limite Plantronics offre une garantie limite dun an sur ce produit. Dans certains pays, vous devez enregistrer votre produit pour bnficier des services de garantie. Toutefois, vous pouvez galement jouir dautres droits, lesquels peuvent varier en fonction des lois en vigueur dans lEtat et le pays dans lequel vous avez effectu votre achat. Nous vous conseillons de conserver votre reu afin de prouver la date dachat de ce produit. Pour enregistrer votre produit et consulter les conditions gnrales de garantie de Plantronics, rendez-vous notre site Web www.plantronics.com/support. Clause compromissoire La plupart des rclamations et des litiges associs ce produit, notamment votre utilisation de ce produit, sont soumis la convention darbitrage de Plantronics, Inc. ( Conditions darbitrage ). Les litiges et rclamations subis ou engags en Europe ou en Afrique ne sont pas soumis cette clause compromissoire. Vous pouvez consulter les Conditions darbitrage et les questions frquemment poses sur le processus darbitrage ladresse plantronics.com/us/terms/arbitration-forms/ ou demander une copie papier (i) par e-mail :

general.counsel@plantronics.com ou (ii) par courrier : Plantronics, Inc., 345 Encinal Street, Santa Cruz, CA 95060, Etats-Unis, lattention du Conseil gnral. Renseignements sur la scurit Veuillez lire les renseignements suivants sur la scurit et le fonctionnement avant dutiliser ce produit. Veuillez conserver ces instructions pour consultation ultrieure. Lorsque vous utilisez ce produit, vous devez prendre certaines prcautions de base pour rduire le risque dincendie, de choc lectrique, de blessure et pour viter tout dommage matriel. Dautres avertisse-

ments peuvent figurer sur lappareil, sur lemballage ou dans les instructions. Gnralits La plage de temprature dutilisation, dentreposage et de chargement de lappareil est de 0 C 40 C

(32 F 104 F). Avertissements Nutilisez que les produits et accessoires Plantronics spcialement conus pour ce systme. ENFANTS. Ne laissez pas les enfants jouer avec le produit; ils risqueraient de stouffer avec les petites pices. Ne dmontez pas le produit ou ladaptateur c.a. car cela peut vous exposer des tensions dangereuses ou dautres risques. Un mauvais remontage de lappareil pourrait causer un choc lectrique lors dune utilisation ultrieure du produit. Ninsrez rien dans le micro-casque ou le chargeur; vous pourriez endommager les composantes internes ou vous blesser. vitez tout contact avec des liquides. Ne placez pas le produit prs dune source deau ou dhumidit, par exemple prs dune baignoire, dun vier ou dune piscine ni dans un sous-sol humide, afin dviter tout dommage au produit ou toute blessure ventuelle. Cessez dutiliser le produit et communiquez avec Plantronics en cas de surchauffe, de prise ou de cordon endommag, si vous avez laiss tomber le produit ou sil est endommag, ou si le produit est entr en contact avec des liquides. Ce produit ne doit jamais tre plac prs dune source de chaleur ni dans un endroit ou la ventilation est inadquate. Si une irritation de la peau se manifeste aprs avoir utilis ce produit, cessez de lutiliser et communiquez avec Plantronics. Une exposition un volume sonore lev peut endommager votre oue de manire temporaire ou permanente. Mme si au-

cun rglage de volume nest appropri pour tous, vous devez toujours rgler le volume dcoute une intensit modre et viter dutiliser un volume lev de faon prolonge. Plus le volume est lev, plus vous risquez dendommager rapidement votre audition. Le volume du micro-casque peut varier selon lappareil auquel il est coupl. Lappareil que vous utilisez ainsi que ses paramtres modifient le volume. Si vous ressentez une gne auditive, arrtez dutiliser le micro-casque et consultez un mdecin. Pour protger votre audition, voici ce que des experts en matire daudition recommandent :

1. Rglez le volume bas niveau avant de placer le micro-casque sur vos oreilles et utilisez-le au volume le plus bas possible. 2. vitez daugmenter le volume pour vous isoler des bruits environnants. Utilisez de prfrence le micro-casque dans un endroit tranquille, sans trop de bruits de fond. 3. Utilisez volume lev le moins longtemps possible. 4. Baissez le volume si le son provenant du micro-casque vous empche dentendre les personnes qui parlent autour de vous. Pour obtenir de plus amples renseignements sur les micro-casques et laudition, consultez le site plantronics.com/healthandsafety. 88965-13 Rev D 12.17

CS510-XD/CS520-XD Wireless Headset System User Guide Contents Contents Welcome 3 Whats in the Box 4 Base and Headset Basics 5 Accessories 6 Headset Set Up 7 Connect Your Desk Phone 8 Connect the Power 8 Charge the Headset 8 Connect and Configure Your Desk Phone 9 Desk Phone (standard) 9 Check Configuration and Make a Test Call 10 Desk Phone plus HL10 Lifter (sold separately) 11 Desk Phone plus EHS Cable 13 Position Your Base 14 Your Headset 15 Headset Controls 15 Talk Time 15 Battery 16 Muting Your Headset During a Call 16 Adjusting Your Headset Volume 16 Out of Range Warning Tones 16 Your Base 17 Base Phone Button and Switches 17 Subscription Button 17 Wideband/Narrowband Audio Switch 18 Auto Answer Switch 19 Daily Use 20 Place an Outgoing Call 20 Answer an Incoming Call 20 Conference Up to Three Additional Headsets 20 Troubleshooting 21 Headset 21 Desk Phone 21 2 Welcome Congratulations on purchasing your new Plantronics product. This guide contains instructions for setting up and using your CS510-XD/CS520-XD Wireless Headset System. Please refer to the separate safety instructions for important product safety information prior to installation or use of the product. 3 Whats in the Box Base Headset Model WH350-XD (binaural) shown -

Model WH300-XD (monaural) available Telephone interface cable Power supply 4 Base and Headset Basics BACK 4 BOTTOM 10 65 7 8 9 11 12 Base overview FRONT 1 2 3 1 Call/mute LED 2 Power on/subscription LED 3 Charging LED 4 Subscription button 5 Narrowband/wideband audio switch 6 Power jack 7 Handset lifter/EHS cable jack 8 Telephone interface cable jack 9 Auto answer switch 10 Listening volume dial*

11 Speaking volume dial*

12 Configuration switch*

* For installation set up Headset overview 1 2 5 6 3 4 7 1 Headband 2 Volume down button 3 Headset LED 4 Volume up button 5 Call control button 6 Mute button 7 Microphone 5 Accessories 1 2 3 1 Electronic hookswitch cable (EHS) Electronically takes your desk phone handset off hook. Enables remote call answer/end with your headset. 2 HL10 lifter Automatically lifts handset and returns it to the cradle. Enables remote call answer/end with your headset 3 Online indicator (OLI) A light that flashes once a call is activated. It allows others to know when you are on a call. 6 Headset Set Up Your headset comes fully assembled. You can adjust the headband for a better fit and the mouthpiece for optimal performance. Adjust the Headband 1 To adjust the headband, lengthen or shorten the band until it fits comfortably. The clickstop feature keeps the headband securely adjusted. 2 Position the headset so that the leather ear cushion(s) sit comfortably over the center of your ear(s). For the WH300-XD headset, position the stabilizer T-bar above your ear. 3 For a tighter fit, gently pull the opposite end of the headset inward as shown. Adjust the Mouthpiece 2"

50.8 mm 1 Carefully bend and shape the boom with both hands as shown. Avoid bending or twisting the boom near the microphone or earpiece. 2 Position the click stop turret and boom so that the microphone is two finger-widths from the corner of your mouth. 2"

50.8 mm front back front back 7 Connect Your Desk Phone This section describes how to connect the base to your desk phone. Connect the Power Plug one end of the power supply into the power jack on the back of the base and the other end into a working power outlet. The Power On LED will be solid white. Charge the Headset Place the headset in the charge cradle. The charging LED on the base will flash green when charging and turn solid green when the headset is fully charged. Charge for at least 20 minutes prior to the first use. A full charge takes 4.5 hours.

=

20 NOTE The product has a replaceable battery. Contact Plantronics for replacement information. 8 Connect and Configure Your Desk Phone There are three setup options for connecting the CS510-XD/CS520-XD to your desk phone. Select one of the following and continue. Desk phone (standard) Desk phone + HL10 lifter (sold separately) Desk phone + EHS cable (sold separately) NOTE If you will be using a standard desk phone set up or a desk phone with an HL10 lifter, continue below. If you will be using the desk phone with an EHS cable, refer to Desk phone plus EHS cable section in this guide. For further installation information refer to the EHS Getting Started guide that came with your EHS cable or at plantronics.com/accessories. Desk Phone (standard) 1 Connect one end of the telephone interface cable to the back of the base. 2 Disconnect the handset coil cord from the desk phone and re-connect it to the telephone interface cable junction box. 3 Connect the remaining end of the telephone interface cable into the open handset port on the desk phone. NOTE Your desk phone handset will continue to work; its just hooked up differently. USE NOTE If your phone has a built-in headset port, you should only use the headset port if you will not be using the HL10 lifter. In this configuration, you must press both the headset button on your phone and the call control button on the headset to answer or end calls. 9 Check Configuration and Make a Test Call 1 If your desk phone has a volume control set it to mid-range. 2 Look at the bottom panel of your base and make sure the default settings are correct. Listening volume dial (

Configuration switch = A Desk phone volume = mid-range

) = 2 and Speaking volume dial (

) = 2 3 Remove the handset from desk phone cradle. 4 While wearing your headset, press the call control button on the headset. 5 If you do not hear a dial tone, adjust the configuration switch (A-G) until you do. NOTE For most phones, the factory default settings will sound the best. 6 Dial a test call from the desk phone. If needed, fine tune the volume with the headset volume controls. You can also adjust the desk phone speaking and listening volumes on the bottom of the base. 10 Desk Phone plus HL10 Lifter (sold separately) NOTE First follow the steps above for Desk Phone (Standard). 1 Firmly press the handset lifter power cord into the handset lifter jack. USE 2 While wearing your headset, slide the handset lifter arm under the handset until the lifter base touches the side of the phone. 3 Slide the lifter up to where it nearly touches the handset earpiece. 4 Press the call control button on your headset to activate the lifter. 5 If you hear a dial tone the lifter is set correctly and needs no adjustment. 6 Remove the protective strips from the 3 mounting tapes on the underside of the lifter. 7 Gently place the lifter on the desk phone in the pre-determined position. 8 Press firmly to adhere. 11 If You Do Not Hear a Dial Tone 1 If you do not hear a dial tone, raise the lifter height switch to the next highest position. 2 Repeat steps 2 through 5 above as necessary until you hear a dial tone. 3 When you hear a dial tone, secure the lifter as described in steps 6 through 8. Additional Parts (if required) Use extender arm when the handset lifter needs additional stability lifting and returning handset to cradle. Extender Arm 1 Slide extender arm onto lifter. 2 Stabilizers can be shifted left and right. Position stabilizers on outsides of handset to gently grip the handset. 1 2 2 Ringer Microphone Use ringer microphone only when the telephone speaker is not located directly under the handset. 1 Remove cover from ringer microphone jack on back of lifter. 2 Connect ringer microphone plug. 3 Place ringer microphone over phone speaker. Remove adhesive tape and attach. 3 1 2 12 For Nortel Phones Only Desk Phone plus EHS Cable 1 Connect the end of the EHS cable to the base and the other end to the desk phone as described in the EHS Adapter Getting Started guide. NOTE For further installation information refer to the EHS Getting Started guide that came with your EHS cable or at plantronics.com/accessories. USE 13 Position Your Base The minimum recommended separation between your desk phone and the base is 6 inches. The minimum recommended separation between the base and computer is 12 inches. Incorrect position can cause noise and interference problems. 14 Your Headset Now that youve adjusted your headset and connected your desk phone, read this section to learn about the headset features, how to use the controls and more. Headset Controls 1 2 3 4 5 1 Volume [] button Press to lower volume 2 Headset LED Flashes green when in use 3 Call control button Place, answer, end a call Briefly press the call control button 4 Mute button Press to mute/unmute 5 Volume [+] button Press to increase volume IMPORTANT For your safety, do not use headset at high volumes for extended periods of time. Doing so can cause hearing loss. Always listen at moderate levels. For more information on headsets and hearing visit: plantronics.com/healthandsafety. Talk Time With a single full charge, the CS510-XD/CS520-XD will provide up to 12 hours of talk time in narrowband mode and 8 hours in wideband mode. Talk time will be reduced when headset is used consistently at a long distance from the base. 15 Battery This product has a replaceable battery. To ensure replacement batteries meet Plantronics high quality standards and for optimal performance, only use replacement batteries provided by Plantronics. Low Battery Warning If you are on a call and the headset battery is critically low, you will hear a repeated single low tone every 15 seconds indicating that the battery is low. You should recharge the headset immediately. If you are not on a call and press the call control button, you will hear three low tones if the battery is critically low. You should recharge the headset immediately. Muting Your Headset During a Call To mute/unmute the call, press the mute button. When mute is activated on the primary headset, the Call/mute LED on the base will be solid red and you will hear three high tones (you will still be able to hear the caller). Adjusting Your Headset Volume Fine-tune your headset volume by pressing the volume [+] button to increase or the volume []

button to decrease. Make set up volume adjustments for the desk phone with the volume dials on the base. Out of Range Warning Tones If you are on a call and go out of the operating range, you will hear three low tones. You will hear a single mid tone when you are back in range. If you stay out of range, an active call will be suspended. The call will be re-established when you walk back into range. If you remain out of range for more than 5 minutes, the system will drop the call. If you are not on a call and go out of the operating range and then press the call control button, you will hear a single tone for the button press and three low tones for the failure to make a link. 16 Your Base Base Phone Button and Switches 1 2 3 1 Subscription Button The headset and base that came in the box are subscribed (connected) to each other. However, if you wish to use a new headset or need to restore subscription to your current headset, the units can be subscribed to each other by the following two methods. NOTE The red CS500XD markings on the base and headset indicate an XD headset system and only XD headsets can be subscribed to XD bases. If you try to subscribe a non-XD headset to an XD base, the power LED on the base will turn off and will remain off until the non-XD headset is removed from the base. Automatic Secure Subscription With your system idle, docking a headset will automatically subscribe it to the base, making it the primary headset. The Power On/Subscription LED will flash white during subscription process and become solid white when the new subscription is established. Manual Over-the-Air Subscription 1 With your system idle and your headset undocked, press and hold the subscription button on the base for three seconds. The Power on/subscription light will flash white. 2 Press and hold the volume up button on the headset for three seconds until the headset LED turns solid green. When the Power on/subscription LED on the base becomes solid white, the headset and base are subscribed to one another. NOTE If the subscription process times out after two minutes or if the subscription process fails, the subscription LED on the base will go dark for three seconds and then re-illuminate steadily to indicate power is applied to the base. If this occurs, try to re-subscribe the headset again. Ending Subscription If the base is in subscription mode and you want to stop the base from searching for a headset, press the subscription button again. The subscription LED on the base will go dark for three seconds and then re-illuminate steadily to indicate power is applied to the base. 17 Power On/Subscription LED Base Status Power On/Subscription LED Primary headset subscription Flashes white Primary headset subscribed to base Solid white Conference call headset subscription Flashes white Active conference call with guest headsets Flashes white rapidly Incompatible headset and base Off 2 Wideband/Narrowband Audio Switch The CS510-XD/CS520-XD has wideband audio, which allows speech to sound clearer and more natural. If your desk phone is capable of wideband audio, set the Wideband-Narrowband audio switch to yellow for wideband. NOTE: Talk time will be reduced when operating in wideband mode. Set the switch to black (narrowband) for longer headset battery life or to increase the number of systems that can work in a small area. 18 3 Auto Answer Switch Auto answer saves a button press to establish the radio link between headset and base. When auto answer is set to black you must press the headset call control button to answer an incoming call. When Auto Answer is set to gray you can answer a call just by lifting headset from the base. NOTE Auto answer/end capability requires the use of an EHS cable or HL10 lifter. Visit plantronics.com/accessories for more information. 19 Daily Use Place an Outgoing Call 1 Wearing your headset, press the headset call control button. 2 Remove the handset from the cradle. You will hear a dial tone. NOTE This step will be automatic if you install a lifter or EHS cable accessory. For a complete list of accessories, visit plantronics.com/accessories. 3 Dial the number using your desk phone. 4 To end the call, press the headset call control button and hang up the handset. Answer an Incoming Call 1 Wearing your headset, press the headset call control button. 2 Remove the handset from the cradle and speak to your caller. NOTE This step will be automatic if you install a lifter or EHS cable accessory. For a complete list of accessories, visit plantronics.com/accessories. 3 To end the call, press the headset call control button and hang up the handset. Conference Up to Three Additional Headsets You can conference up to three additional headsets to a call in progress. NOTE Only XD headsets will work with XD bases. Join a Conference Call While in an active link between the primary headset and the base (on a call), place the guest headset into the primary users charge cradle (this connects the headset to the base). The base subscription LED will begin flashing. After a few moments, the primary user will hear a triple tone in their headset indicating the guest headset wishes to join the call. Within ten seconds of hearing the triple tone, press the primary headsets call button to accept the guest headset. If the process fails or times out because the button was not pressed within ten seconds the guest subscription is terminated and the guest will hear an error tone in their headset. To connect a guest headset that is of different variety than the primary headset press the base subscription button while the base has an active link. Next, press the guest headset volume up button until the indicator light turns on. The base subscription LED will begin flashing and the primary user will hear a triple tone in their headset indicating the guest headset wishes to join the call. Within ten seconds of hearing the triple tone, press the primary headsets call button to accept the guest headset. If the process fails or times out because the button was not pressed within ten seconds the guest subscription is terminated and the guest will hear an error tone in their headset. NOTE Headsets in a conference maintain independent mute controls. The base only indicates the primary users mute state. Exit a Conference Call Guests headsets can remain as guests through multiple calls. To remove a guest headset, press the guest headsets call button or dock the primary users headset in the charge cradle. A single tone in the master headset will be heard as each guest leaves the call. 20 Troubleshooting Headset Headset has to be charged too often. Talk time is not as long as stated. Talk time performance is significantly degraded even after a full recharge. Switch the Wideband-Narrowband audio switch to narrowband (black). Battery is wearing out. Call Plantronics at (800) 544-4660 for factory replacement information or contact us at plantronics.com/support. I cant subscribe a headset to the base. Make sure both the headset and base have the red XD markings. See Subscription button in this user guide. Desk Phone I cant hear a dial tone in the headset. Make sure your headset is charged. Make sure your headset is subscribed to base. See Subscription button. Press the call control button on your headset. If using a lifter, make sure the lifter is lifting the handset high enough to operate the hookswitch; set to a higher setting if necessary. Adjust the configuration switch on the base until a dial tone is heard. Fine tune the listening volume on the headset. If the volume is still too low, adjust the Listening volume dial on the base. I hear static. Make sure there is at least 12 inches between your base and your computer, and 6 inches between your base and your telephone. You may hear static as your headset is going out of range; move closer to the base. The sound is distorted. I hear echo in the headset. Lower the Speaking volume dial or Listening volume dial on the base. For most telephones the correct setting is position 2. If your desk phone has a volume control, lower until the distortion disappears. If the distortion is still present, adjust the headset volume control to lower the headset speaker volume. If the distortion persists, lower the Listening volume dial on the base. Make sure there is at least 12 inches between your base and your computer, and at least 6 inches between your base and your telephone. Lower the Listening volume dial and Speaking volume dial on the base. For most telephones, the correct setting is position 2. If the audio level is too low in this position, adjust the headset volume control to increase the headset speaker volume. If your speaking volume is too low for your listener in this position, adjust the position of the headset to make sure the microphone is a fingers width from the corner of your mouth. Adjust the Configuration switch. The most commonly used position is A. People I talk to can hear a buzz in the background. Move the base further away from your phone. If the base power supply is plugged into a power strip, plug it into the wall directly. The handset lifter is installed but does not lift the handset. Be sure the handset lifter power cord is firmly pushed into the handset lifter jack on the base. 21 NEED MORE HELP?

plantronics.com/support Plantronics, Inc. 345 Encinal Street Santa Cruz, CA 95060 United States 2015 Plantronics, Inc. All rights reserved. Plantronics, the logo design, CS510-XD, CS520-XD, C052-XD, WH300-XD, WH350-XD, EHS, and HL10 are trademarks or registered trademarks of Plantronics, Inc. All other trademarks are the property of their respective owners. Patents US D535,285; D538,785; BR DI71026967; CN ZL200630123314.7; ZL200630123313.2; 201130145424.4; EM 000543798-0004; 000543798-0005; 001-

865510-0001; IN 236857; TW D117515; D117333; Patents Pending 88949-06 08.15