Savi Talk WT100/T Professional wireless headset system
(WT1/T base + WH100/T headset) with optional HL10 lifter User Guide Welcome Congratulations on purchasing your new Plantronics product. This guide contains instructions for setting up and using your Savi Talk professional wireless headset system. Plantronics Savi User Guide Contents 1 Package contents and features .................................. 4 1.1 Base ......................................................................... 4 1.2 Savi WH100/T headset ............................................ 5 1.3 HL10 lifter and features (optional) ............................ 6 2 Base set-up ................................................................ 7 2.1 Attaching charging cradle to base ........................... 7 2.2 Connecting base to desk phone .............................. 7 2.3 Connecting power supply to base ........................... 7 2.4 Positioning base ..................................................... 7 3 Headset set-up ........................................................... 8 3.1 Fitting headset ......................................................... 8 3.2 Docking and charging the headset .......................... 8 4 Configuration and test call ......................................... 9 4.1 Checking configuration ............................................ 9 4.2 Making a test call ..................................................... 9 5 Lifter set-up (optional) .............................................. 10 5.1 Installing lifter ........................................................ 10 5.2 If you do not hear a dial tone ................................ 10 5.3 Additional parts (if required) .................................. 11 6 Using your Savi Talk professional wireless headset system ..................................................................... 12 Powering headset on/off .............................................. 12 Placing, answering and ending calls with desk phone ..................................... 12 Muting a call ................................................................ 13 Base indicator lights .................................................. 13 Headset indicator lights and tones .............................. 13 Subscription ................................................................. 14 7 Troubleshooting and common questions ................. 15 Plantronics Savi User Guide 1 Package contents and features 1.1 Base Base power supply Telephone interface cable Base Savi WT1/T base features Talk indicator light Master speaking volume Configuration switch Master listening volume Subscription button and indicator light Power indicator light Power jack Telephone interface cable jack Handset lifter jack Plantronics Savi User Guide 4 1.2 Savi WH100/T headset Headset with pre-installed ear loop Headband Charging cradle Savi WH100/T headset features Indicator light Ear loop Call control button (also controls volume and mute functions) Microphone Plantronics Savi User Guide 5 1.3 HL10 lifter and features (optional) Handset lifter arm Power cord HL10 lifter Additional HL10 lifter parts (if required) Ringer microphone jack
(remove cover) Height switch Accessory jack Ringer microphone Extender arm For Nortel i2004 phones only Plantronics Savi User Guide 6 2 Base set-up 2.1 Attaching charging cradle to base 2.3 Connecting power supply to base 1 Connect the headset charging cradle to the base. Push 1 Connect the base power supply into the power jack on firmly on the cradle until the cradle snaps into place. the base. 2 Connect the power supply to outlet. The power indicator light will be solid red. 2.2 Connecting base to desk phone 1 Connect the telephone interface cable to the telephone interface cable jack on the base. 2 Disconnect the handset coil cord from the desk phone. 3 Connect the telephone interface cable to the now open handset port on the desk phone. 4 Connect the handset coil cord to the telephone interface cable junction box. 5 Place the handset back on the telephone cradle. 2.4 Positioning base The minimum recommended separation between your desk phone and the base is 15 cm. The minimum recommended separation between the base and computer is 30 cm. Incorrect position can cause noise and interference problems. 30 cm 15 cm Note If your phone has a built-in headset port, you should only use the headset port if you will not be using the HL10 lifter. In this configuration, you must press both the call control button on your phone and the call control button on the headset to answer or end calls. Plantronics Savi User Guide 7 3 Headset set-up 3.1 Fitting headset The headset comes with a pre-installed ear loop. An optional headband is also provided. 1 to install the headband, gently unsnap the pre-installed ear loop from the headset. 3.2 Docking and charging the headset 1 Gently push the headset into the charging cradle. The indicator light on the headset will be solid red to indicate that the headset battery is charging 2 Charge for at least 20 minutes prior to the first use. 2 Snap the headband into the headset. The headband can A full charge takes 3 hours. be adjusted to fit. 3 For either wearing option, rotate the headset until the microphone is pointed towards your mouth. 4 the headset can be converted for wearing on the left or right ear with both ear loop and headband. Ear loop Headset Snap Headband Indicator light CHArgIng TIMe 20 min ..................... Minimum charge before first use 3 hours ................... Full charge Plantronics Savi User Guide 8 4 Configuration and test call 5 Adjust the master listening volume on base. A setting of 2 or 3 is ideal. Master speak-
ing volume Master listening volume 6 You can also fine-tune the listening volume on the headset by pushing the call control button up to increase the volume and pushing down to decrease the volume. Note Do not press the call control button in when adjusting the volume; otherwise, the call can be ended accidentally. 7 to end the test call, press the call control button on the headset. 8 Replace the handset in the desk phone cradle. 4.1 Checking configuration 1 Set volume on desk phone to mid-range. 2 Remove handset from desk phone cradle. 3 With your headset on, press the call control button on the headset. 4 Listen for a normal dial tone. If you hear a dial tone and the dial tone sounds normal, continue with Step 4.2 Making a test call. 5 If you do not hear a dial tone or the dial tone is distorted, adjust the configuration switch until the dial tone sounds normal. Note Multiple settings might work with your phone; however, only one is the optimal position Configuration switch 4.2 Making a test call 1 Remove handset from desk phone cradle. 2 With your headset on, press the call control button on the headset. 3 Dial using your desk phone. 4 Adjust the master speaking volume on base to the best setting for your listener. A setting that is too high can produce an uncomfortable echo for you and a distorted sound for your listener. A setting of 3 or 4 is ideal. Plantronics Savi User Guide 9 5 Lifter set-up (optional) 5.1 Installing lifter 7 Gently place the lifter on the desk phone in the pre-
determined position. 8 Press firmly to adhere. Handset lifter power cord 1 Firmly press the handset lifter power cord into the handset lifter jack. 2 While wearing your headset, slide the handset lifter arm under the handset until the lifter base touches the side of the phone. 5.2 If you do not hear a dial tone 1 If you do not hear a dial tone, raise the lifter height 3 Slide the lifter up to where it nearly touches the handset switch to the next highest position. earpiece. 4 Press the call control button on your headset to activate hear a dial tone. the lifter. 3 When you hear a dial tone, secure the lifter as described 2 Repeat Steps 2 to 5 in Section 5.1 as necessary until you 5 If you hear a dial tone, the lifter is set correctly and in Steps 6 to 8. needs no adjustment. 6 Remove the protective strips from the 3 mounting tapes on the underside of the lifter. Plantronics Savi User Guide 10 5.3 Additional parts (if required) Ringer microphone extender arm Stabilisers 2 3 1 2 1 2 Use extender arm when the handset lifter needs additional stability lifting and returning handset to cradle. 1 Slide extender arm onto lifter. 2 Stabilisers can be shifted left and right. Position stabilisers on outside of handset to gently grip the phone. Use ringer microphone when the telephone speaker is not located directly under the handset. 1 Remove cover from ringer microphone jack on back of lifter. 2 Connect ringer microphone plug. 3 Place ringer microphone over phone speaker. Remove adhesive tape and attach. For Nortel i2004 phones only Plantronics Savi User Guide 11 6 Using your Savi talk professional wireless headset system For your safety, do not use headset at high volumes for extended periods of time. Doing so can cause hearing loss. Always listen at moderate levels. For more information on headsets and hearing, visit: www.plantronics.com/healthandsafety Note: If your desk phone has a volume control, set it to mid-
range. Powering headset on/off The headset will be ready to use once it has been charged in the base as described in Section 3.2. To conserve power, you may optionally power the headset off by pressing and holding the call control button for six seconds. The headset indicator light will be lit red for four seconds to confirm that the headset is powered off. Note: Once powered off you will not be able to use the headset. To power the headset back on, press and hold the call control button for four seconds; the headset indicator will light blue for two seconds, then flash red a number of times to indicate the remaining battery charge (see Checking the battery level). Call control button Indicator light Placing, answering and ending calls with desk phone Phones with handset lifter or electronic hookswitch To place a call*
1. Short press call control button 2. Dial number To answer a call*
1. Short press call control button To end a call*
1. Short press call control button Phones without handset lifter or electronic hookswitch 1. Short press call control button 2. Remove handset from cradle 3. Dial number 1. Short press call control button on headset 2. Remove handset from cradle 1. Short press call control button 2. Return handset to cradle
* To place, answer or end calls with desk phones that have a headset button and without a handset lifter, you will need to press the headset button on the desk phone after you short press the headset call control button. Plantronics Savi User Guide 12 Talk indicator light Power indicator light Subscription button and indicator light Muting a call To mute a call, push and hold the headset volume down button for two seconds. You will hear a low/high tone pair indicating the mute is activated. The talk indicator light on the base will flash blue. To un-mute a call, push and hold the headset volume down button for two seconds. You will hear a high/low tone pair indicating the mute is deactivated. The talk indicator light on the base will be solid blue. Base indicator lights Note: The Savi WT1/T power indicator light will be solid red whenever power is supplied to the base. Base status Headset in talk mode Headset muted Base and headset subscribing Subscription button and indicator light talk indicator light On On Flashes red and blue Solid blue Flashes blue Off Headset indicator lights and tones Headset status Headset charging Headset fully charged Headset battery low Headset ready Incoming call Active call Headset indicator light Solid red Off Flashes double red Slow blue flash (every 10 sec.) Flashes purple Fast blue flash (every 2 sec.) Plantronics Savi User Guide 13 Subscription The headset and base unit are supplied subscribed to each other. However, if you wish to use a replacement headset with your existing base, the units can be subscribed to each other by the following method:
1 ensure your replacement headset is fully charged. 2 Power the headset off by pressing and holding the call control button for six seconds. The headset indicator light will be red for four seconds. 3 Place the headset in subscription mode by pressing and holding the call control button until the indicator light flashes red and blue. 4 Place the base in subscription mode by pressing and holding the subscription button on the base for two seconds, the subscription light will flash red and blue. 5 When the subscription light on the base goes solid blue, the headset and the base are subscribed to each other. Out of range warning If you are on a call, you will hear the audio degrade as you move out of range. If you stay out of range, active calls will be suspended. Calls will be re-established when you walk back into range. If you remain out of range for more than 10 minutes, the system will drop the call. Low battery warning A repeating high/low tone pair every 10 seconds indicates the battery is low. You should recharge the headset immediately. Checking the battery level You can check the battery level by pressing the call control button inwards then holding in the volume down position for 2 seconds. The headset indicator will flash red to indicate the remaining battery charge level. One red flash = low charge level Two red flashes = medium charge level Three red flashes = high charge level Turning the headset indicator blue flash on/off By default, the headset indicator flashes blue to indicate the headset state as described in the section Headset indicator lights and tones. This feature may be disabled by pressing the call control button inwards then holding in the volume up position for two seconds. The headset indicator will show a short burst of blue flashes. Repeat this operation to turn the headset blue flashing indicator back on. Mute warning When mute is activated, you will hear a single low tone which will repeat every 30 seconds. Plantronics Savi User Guide 14 7 troubleshooting and common questions I can't hear a dial tone at the headset. Make sure your headset is charged. Make sure your headset is subscribed to base. See page 14. Press the call control button on your headset. Make sure the lifter is lifting the handset high enough to operate the hookswitch; set to a higher setting if necessary. Adjust the configuration switch on the base until a dial tone is heard. Fine-tune the listening volume with the call control button. If the volume is still too low, adjust the master listening volume on the base. I hear static. Make sure there is at least 30 cm between your base and your computer, and 15 cm between your base and your telephone. If adjusting the distance doesn't help, your headset is going out of range;
move closer to the base. The sound is distorted or I hear an echo in the headset. Reduce speaking volume by adjusting the master speaking volume on the base. Point microphone towards your chin. Listening volume may be too high on desk phone. If your desk phone has a volume control, lower until the distortion disappears. If the distortion is still present, lower the volume using the call control button on the headset. If the distortion persists, lower the master listening volume on the base. Make sure there is 30 cm between your base and your computer, and 15 cm between your base and your telephone. People I talk to can hear a buzz in the background. Move the base further away from your phone. Base power supply is plugged into a power strip. Plug the power supply into the wall directly. Talk time performance is significantly degraded even after a full recharge. The handset lifter is installed, but does not lift the handset. Battery is wearing out. Call Plantronics at 1-800 544-4660 for factory service information. Ensure the handset lifter power cord is firmly pushed into the handset lifter jack on the base. The call is dropped.
(Subscription light on base is off) Headset lost subscription. See page 14. Plantronics Savi User Guide 15 FCC Regulatory Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The base should be installed and operated with minimum distance 20 cm between the radiator and your body. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Industry Canada Regulatory Information This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Plantronics, Inc. 345 Encinal Street Santa Cruz, CA 95060 United States Tel: 800-544-4660 www.plantronics.com 2008 Plantronics, Inc. All rights reserved. Plantronics, the logo design, HL10, PerSonoCall and Plantronics Savi are trademarks or registered trademarks of Plantronics, Inc. All other trademarks are the property of their respective owners. Patents US D555,153; EM 000674601; Taiwan D121333 and Patents Pending 81778-01 (10.08)