FCC ID: 2ASOM-PERI Plevo smart suitcase

UP User Guide Welcome to the PLEVO family www.plevo.co Table of Contents Product 01- Product external parts Removable battery 02- Parts and features 03- Installation 04- Extraction method Removable wheels 05- Installation 06- Dismantling Mobile application and electronic lock 07- Components 08- Electronic lock (Morse code) 09- Electronic lock (Face ID/Touch ID) 10- Digital Scale 11- GPS Airplane mode 12- Activation and disabling method Communication 13-15- Lights and alerts indicators Garment bag System 16- Components 17-19- Operation UP PRODUCT 1 Outer parts of the suitcase Main handle Secondary handle Front light indicator Front lock aps Frontal logo Electronic lock Side handle Front cover Removable wheel Button Dashboard Battery access cover Aluminum frame Rear logo Hinged Body Support plugs Wheel holder The images in this manual are illustrative and can vary with actual model. UP User Guide 01 REMOVABLE BATTERY Parts and characteristics Characteristics:

Our energy bank with lithium-ion battery (8,000 mah) is fully removable from PLEVO baggage.

-Dimensions: 85.5 x 84 x 21 mm

-Capacity: 8000 Mah/29.6 WH

-Input (Micro): 5v/3a 9v/2a

-Input (C-type): 5v/3a 9v/2a

-type-C output 5v/3a 9v/2a 12v/1.5 A-QC 3.0 output:

5v/3a 9v/2a 12v/1.5 A

-USB output: 5v/3a

-Total output: 18w MAX Micro USB Power button USB 3.0 USB USB-C Battery lights UP User Guide 02 Installation A To install the energy bank, it is necessary to access the "A" cover on the back of the board and open it by rotating it downwards. This cover protects internal components from shocks, dust, and water so it is recommended that it is always closed while the battery is not in use. Picture 1 Open the rubber cover to the right to access the internal compartment of the board . Picture 2 Position the battery horizontally and press forward until the mechanism locks and the element is anchored. UP User Guide 03 Extraction method

!

BATTERY BACKUP Our system has a nickel-ion back-up battery of less than 600mAh and its weight is 39g (2.16 Wh). This battery feeds THE WHOLE suitcase when the removable battery is not installed on it. 1 Open the sticky cover to the right to access the battery. 2 Press forward slightly until the ejection mechanism is released. 3 Remove the battery horizontally forward, without making any upward or lateral pressure. UP User Guide 04 REMOVABLE WHEELS Installation A A A A To be able to set each of the wheels it is necessary to get access to the four "A" locks placed in the lower part of the suitcase. Follow steps 1-3 to remove the latch and install the wheels. 1 2 3 B Hold the latch button down and place the wheel bolt into orice B. Make pressure on the wheel until it fully snaps into the orice. Release the safety button so that the nal adjustment is done. UP User Guide 05 Disassembly A A A A To remove each one of the wheels, it is necessary to access the four "A"

locks located in the lower part of the bag. Follow steps 1-3 to remove the safe and extract the wheels. 1 2 3 Hold the button back to release the latch. Pull the wheel backwards while holding down the button. C The wheel is released once the

"C" Bolt is completely out from the orice. UP User Guide 06 MOBILE APPLICATION AND ELECTRONIC LOCK COMPONENTS - Electronic lock Morse code button TSA logo Indicator light TSA Lock Secondary handle Using Travel Sentry Approved lock allows your luggage to be unlocked and inspected by security authorities without damage. UP User Guide 07 Electronic lock (Morse code) All PLEVO bags have an alternate Morse code closure system that replaces the old padlocks. Only one-

time code conguration is required, and it will be ready for use at any time without depending on the battery or mobile phone. A B B 1 Congure the code from our mobile application. You must select 4 digits. Allowed numbers:

1 to 5. For example: 1234. 2 To open the bag, it is necessary to press the digit button. Doing so will turn the light (A) red on and the action will be taken as a number. So, if you press once, it will be 1, if you press three consecutive times, it is 3. 3 3 If the Morse code has entered correctly, the aps "B", located up and down the closing, will open automatically releasing the latch. UP User Guide 08 Electronic lock (Face ID/Touch ID) It is possible to open or close the bag by means of biometrics by using our mobile application. Depending on the smartphone model used you can choose to use facial recognition or ngerprint. In order to perform this action, it is necessary to follow the steps 1-3 A B B 1 It is necessary to activate the opening method within the application depending on the device used. (In some cases, the selection is automatic) 2 If the input by face ID or by Touch ID has been correct the

"A" light will light in CYAN color for 3 seconds, otherwise it will be in red color communicating the error. 3 Immediately turn on the CYAN light the aps "B", located up and down the closing, will open automatically releasing the latch. UP User Guide 09 While holding luggage with handle A, you will be able to view the weight of the baggage using our mobile device application. Important: Before weighing the bag, it is necessary to start a calibration from the Application. This lasts a few seconds -click on "START TO CALIBRATE"-. The system will then be ready, and the exact weight of the load will be displayed. Digital scale 1 A 2 Lift the suitcase from the oor using the "A" handle to activate the sensors You will be able to monitor the weight of your baggage on your mobile device through our application. UP User Guide 10 GPS Available on the ANDROID APP ON The PLEVO UP model features a GPS tracking system that will allow you to locate the bag anywhere by using our mobile device application. In order to use this feature, you need to install the APP on your device, register and link the system with your luggage PLEVO. PLEVO INFINITE

< New York, United States Our system will load the map of the site where your baggage is located, showing you the exact location.

!

The application for PLEVO devices has automatic distance alerts to warn you immediately when baggage is removed from the owner. UP User Guide 11 Select the GPS function icon in the lower bar of our app and slide it to activate the system. AIRPLANE MODE How to activate/deactivate airplane mode AIRPLANE MODE Our PLEVO bags are developed using a system of sensors that allow to detect what is happening and adjust the condition of the baggage according to the norms established by the FAA, IATA, DOT & EASA. At the moment the suitcase is placed in horizontal mode the sensors that work with the GPS detect the location and go into airplane mode to completely disable, automatically, all the suitcase functions. When landing, these sensors contact the GPS and in case of being at the airport, they automatically disable the airplane mode to re-connect all the functions of the bag. In this way a safe product is achieved that respects all the regulations in force. You can monitor the activation and deactivation of your baggage on your mobile device through our application. UP User Guide 12 COMMUNICATION Indicator lights and alerts (electronic lock) Electronic lock Our electronic locks have a light (A) that show the dierent states of the bag. Can be presented at:

CYAN RED FUNCTIONS Morse Code button Flashing red light each time the Morse code button is pressed. A Three ashes when Morse code is incorrectly entered or when an error occurs in the Face ID/Touch ID A slow ash in CYAN color that will remain 3 seconds when the bag is opened or closed correctly by Face ID/Touch ID or Morse code. UP User Guide 13 Indicator lights and alerts (dashboard) The suitcase has a luminous indicator board (B) that communicates the dierent states of the bag. Can be shown as:

CYAN RED Red light ashes each time the Morse code button is pressed. Three ashes when Morse code is incorrectly entered or when opening by Face ID/Touch ID fails A slow ash in CYAN color that will remain 3 seconds when the bag is opened or closed correctly by Face ID/Touch ID or Morse code. B B UP User Guide 14 Indicator lights and alerts (frontal panel) The bag has a front light (C) that communicates the closing condition of the bag and the pairing with devices. Can be shown as:

CYAN ROJO A slow ash in CYAN color that will remain 3 seconds when the bag is opened or closed correctly by Face ID/Touch ID or Morse code. Intermittent ashes in Red and cyan when the bag is nding a device to connect. C UP User Guide 15 GARMENT BAG SYSTEM Components

!

The system, the universal hangers and the suit-rack are included only in our model B Holders B Hangers spouts A Actuator system C Hangers D Hooks UP User Guide 16 Operation A COMPACT DEPLOYED 1 2 To Deploy the system and access the hangers, press the command buttons inward releasing the latch (Figure 1). Then it will be necessary to slide back the command to nish deploying the system

(Figure 2). UP User Guide 17 Operation

-Hangers-

!

UNIVERSAL HANGERS Our system has a set of plastic hangers adaptable to different supports. In this way it can be used in both a PLEVO and a standard furniture when the garment is moved. E 2 4 1 3 1-

2 To remove a hanger it is necessary to press the E button (Figure 1) and then slide it downwards to make the workpiece unadjusted. 3-4 Rotate part F (Figure 3) to release the hook that allows the hanger to be held in different types of supports (Figure 4). UP User Guide 18 Operation F In the lower part of the inside of the UP model there are two metal strips of hooks necessary for the anchorage of the trunks. To make the adjustment it is necessary to extend the plastic part G (Figure 1) to the corresponding hook and to anchor it to improve the fastening of the suit holder (gures 2 and 3) 1 2 3 UP User Guide UP User Guide 19 19 www.plevo.co FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

receiver is connected. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Reorient or relocate the receiving an Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the Consult the dealer or an experienced radio/TV technician for help. tenna.

Product Name: Plevo smart suitcase Model No.: Up FCC ID: 2ASOM-PERI This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: TCB@siemic.com Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Initial Release (obsolete) Revised wording (obsolete) Updated company template (obsolete) Updated letter information (obsolete) Added FCC ID field (current) Revision History To 1.0 2.0 3.0 4.0 5.0 From 1.0 1.0 2.0 3.0 4.0 Approved Date Nov-14-2006 Sept25-2007 Jan-31-2012 May-23-2014 Sept 16 2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 5.0

(PLEVO LLC)

(2019-03-20) To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, _____PLEVO LLC____hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s):

Product Name: Plevo smart suitcase Model No.: Up, Runner, Infinite FCC ID: 2ASOM-PERI Sincerely, Clients signature Andy Liu / Head of Operations Company Name: PLEVO LLC Address: 650 NE 64th Street, Miami FL 33138, United States Email: aliu@plevo.com SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 5.0

PLEVO LLC Declaration on Model Differences We, PLEVO LLC 650 NE 64th Street, Miami FL 33138, United States Declare that the following product(s):

Product Name: Plevo smart suitcase Model No.: Up, Runner, Infinite FCC ID: 2ASOM-PERI Utilize the identical circuit design, PCB layout, shielding and interface with (Up), only the Shell shape, size and color are different. Therefore this application can be regarded as identical in performance to the submitted test sample. The manufacturer would take all the responsibilities for the above product(s). For and on behalf of Miami FL 33138, United States Location Authorized person Name: Andy Liu Position: Head of Operations Date of issue: 2019-03-20

*I hereby declare that I am entitled to sign on behalf of the applicant and that the information supplied is correct and complete.

775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: TCB@siemic.com Confidentiality Request Letter Reason for Amendment (current / obsolete) Initial Release (obsolete) Adding CFR 2.459 (obsolete) Updated company template & Added text box Added IC confidentiality letter form (obsolete) Corrections to STC form. Added reference to KDB

(obsolete)

(current) Revision History To 1.0 2.0 3.0 From 1.0 1.0 2.0 Approved Date Nov-14-2006 August 11 - 2008 Jan-31-2012 3.0 4.0 4.0 5.0 March-26-2015 Nov 19 2015 SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 5.0

(PLEVO LLC)

(2019-03-20) To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2ASOM-PERI Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as:

Block Diagram Schematics

-

-

- Operational Description

- Tune up

- BOM list The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Clients signature Andy Liu / Head of Operations Company Name: PLEVO LLC Address: 650 NE 64th Street, Miami FL 33138, United States Email: aliu@plevo.com SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 5.0

WIFI Channel 12 and 13 Declaration Letter Reason for Amendment Initial Release (obsolete) Modify the select options (current) Revision History From Initial 1.0 To 1.0 2.0 Approved Date December 22, 2015 September 23, 2016 SCSF190 WiFi Channel 12&13 Declaration Letter Page 1 of 2 Created by William Graff Rev.2.0 Approved by BaoThuong Nguyen PLEVO LLC WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: 2ASOM-PERI Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels cant be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note:

1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo-location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following:

Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code (MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Name / Title: Andy Liu / Head of Operations Signature:

Phone: 3054091160 Email: aliu@plevo.com Date: Mar. 20, 2019 SCSF190 WiFi Channel 12&13 Declaration Letter Page 2 of 2 Created by William Graff Rev.2.0 Approved by BaoThuong Nguyen