FCC ID: 2AG7G-G1A Plume Adaptive WiFi with LTE

SuperPod Aon Model:

G1A/G1J/G1E/G1U G1A with LTE/G1J with LTE/G1E with LTE/G1U with LTE Plume Instruction Manual Welcome to WorkPass by Plume!

This short informative guide will familiarize you with the Plume Pod(s) setup. Additional help is available on Plumes website at https://support.plume.com/

hc/en-us Getting Started Before you use the Pod, please download the WorkPass by Plume app to your smartphone and follow the in-app 2-minute setup guide. The WorkPass by Plume app can be downloaded on:

App Store - iOS Google Play - Android Once the WorkPass by Plume is downloaded and successfully installed. TAP Set up WorkPass from the landing page If you are having trouble, please contact us at: https://support.plume.com/hc/

en-us Step 1 Create your account: Enter your name and location name and tap Next Step 2 Enter your email and password and tap Next Step 3 Connect modem to the left ethernet port on the pod. Plug pod into power. Restart the modem Step 4 Step 7 Setup secure Wi-Fi network name and password Step 8 Setup employee Wi-Fi network name and password Setup guest Wi-Fi network name and password and simply tap Next to set three Plume networks Step 9 Once all three networks are created connect all rest of the pods Step 8 Compliance LEGAL Terms of use, privacy policy and terms of sale can be found at: www.plumewi.com/

legal Regulatory compliance information, including EU and FCC Declaration of Conformity can be found at: www.plumewi.com/regulatory SAFETY ALWAYS READ THE ONLINE USER MANUAL BEFORE SET UP OR USE. IT IS YOUR RESPONSIBILITY TO FAMILIARIZE YOURSELF WITH THE ONLINE USER MANUAL AND WARNINGS, AND TO USE THE DEVICE PROPERLY. To prevent re or electric shock hazard, keep away from rain or moisture. Clean only with a clean, dry cloth. Do not connect the plug into an extension cord, receptacle, or other outlet unless the plug can be fully inserted with no part of the blades exposed. The socket-outlet shall be installed near the equipment and shall be easily accessible. Do not cover the device or block the airow to the device. Do not expose device to temperatures below freezing or above 95F. Device may contain small parts and be otherwise hazardous to children. Keep out of reach of children. If the device malfunctions or fails to perform as expected, stop using it immediately. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Double Insulation This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. Earthing wire is therefore For indoor use only This electrical equipment designed primarily for indoor use only not necessary. Product Information FCC Regulations:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; 5GHz band (W52,W53): Indoor use only (Except for the transmission with High Power Data Communication System Base Station or Relay Station) : 5.2/5.3GHz

(5.2GHz) FCC RF Exposure Compliance This equipment complies with radio frequency (RF) exposure limits adopted by the Federal Communications Commission for an uncontrolled environment. This equipment should be installed and operated to ensure a minimum of 20 cm spacing to any person at all times. Your Plume Pod information is on le with FCC and can be found on FCC website http://www.fcc.gov/oet/ea/by searching the FCC ID on the device, which can be found on the bottom of the Plume Pod. ISED Regulations:

This device complies with ISED applicable license-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux normes RSS pour les dispositifs exempts de licence dISED. Son fonctionnement est soumis aux deux conditions suivantes :

(1) cet appareil ne doit pas provoquer de brouillage prjudiciable, et

(2) il doit accepter tout brouillage reu, y compris le brouillage pouvant entraner un mauvais fonctionnement. CAN ICES-3(B)/NMB-3(B) The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

In addition, high-power radars are allocated as primary users (i.e. priority users) of the bands 52505350 MHz and 56505850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont reserves uniquement pour une utilisation a linterieur an de reduire les risques de brouillage prejudiciable aux systemes de satellites mobiles utilisant les memes canaux. De plus, les utilisateurs devraient aussi etre avises que les utilisateurs de radars de haute puissance sont designes utilisateurs principaux (c.-ad., quils ont la priorite) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL) ISED RF Exposure Compliance This equipment complies with ISED RF exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated to ensure a minimum of 23 cm spacing to any person at all times. Dclaration d'exposition aux radiations:

Cet quipement est conforme aux limites d'exposition aux rayonnements ISED tablies pour un environnement non contrl. Cet quipement doit tre install et utilis pour assurer un minimum de 23 cm espacement toute personne en tout temps. EU Declaration Of Conformity:

Hereby, Hereby, Plume Design, Inc declares that the radio equipment type Plume Adaptive WiFi AP is in compliance with Directive 2014/53/EU, RoHS Directive

(2011/65/EU). The full text of the EU declaration of conformity is available at the following internet address: https://www.plume.com/legal/regulatory The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range. Hereby, Plume Design, Inc declares that the radio equipment type Plume Adaptive WiFi AP is in compliance with the Radio Eauipment Regulation 2017, The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012, The full text of the UK declaration of conformity is available at the following internet address: https://www.plume.com/legal/regulatory Restrictions or Requirements in the UK:

The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range. RF Exposure Information (MPE) This device meets the EU requirements and the International Commission on Non-

Ionizing Radiation Protection (ICNIRP) on the limitation of exposure of the general public to electromagnetic elds by way of health protection. This equipment should be installed and operated to ensure a minimum of 20 cm spacing to any person at all times. Maximum RF Transmit Power Hereby, Plume Design, Inc declares that the radio equipment type Plume Adaptive WiFi AP is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.plume.com/homepass/legal?

tabId=websiteterms&countryId=us North America Plume Design Inc., 325 Lytton Ave., Palo Alto, CA 94301 USA Europe UK Plume Design D.O.O. elezna Cesta 14 1000 Ljubljana, Slovenia Plume Design D.O.O. elezna Cesta 14 1000 Ljubljana, Slovenia

325 Lytton Ave., Palo Alto, CA 94301, United States Plume Design, Inc. Tel: 4084985512 Date: December 22, 2021 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia, MD 21046 SUBJECT: Application for Class II Permissive Change for FCC ID: 2AG7G-G1A This application is to request a Class II Permissive Change for FCC ID: 2AG7G-G1A, originally granted on The change filed under this application is to address the simultaneous transmission analysis with WWAN module EM06-A (FCC ID: XMR201906EM06A) in RF exposure exhibit. Except the change described above, the RF design and software are identical to the application originally Aug. 13, 2021 approved. Sincerely, Nora Huen Ching, Yan nora@plume.com

325 Lytton Ave., Palo Alto, CA 94301, United States Plume Design Inc Tel: 4084985512 Date: December 21, 2021 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: 2AG7G-G1A To Whom It May Concern, Pursuant to Public Notice DA 04-1705 of the Commission s policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. l External Photos l Internal Photos l Test Setup Photo It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, _______________________ Nora Huen Ching, Yan nora@plume.com

  Plume Design Inc

 325 Lytton Ave., Palo Alto, CA 94301, United States

 Tel: 5197728720

Date: July 14, 2021

To whom it may concern,

 Please be notified that I, Nora Huen Ching, Yan , have designated Jones Tsai in Sporton

International Inc. as the person being responsible for this project and to sign the form 731 and

other documentation.

Any and all acts carried out by Jones Tsai in Sporton International Inc. on the matters of relating

to all processes required in the FCC approval and any communication needed with the national

authority, shall have the same legal authority as acts on our own behalf.

We further certify that neither the applicant nor any party to this application, as defined in 47 CFR

Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to

section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862.

This authorization is limited to the product of as following:

 FCC ID: 2AG7G-G1A

If you have any acknowledgement and response, please send it to Sporton International Inc.

directly.

Sincerely yours,

________________________

Nora Huen Ching, Yan

nora@plume.com

  Plume Design Inc

 325 Lytton Ave., Palo Alto, CA 94301, United States

 Tel: 5197728720

Date: July 14, 2021

Federal Communications Commission

Office of Engineering and Technology Laboratory Division

7435 Oakland Mills Rd

Columbia MD 21046-1609

Subject: Request for Confidentiality

 FCC ID: 2AG7G-G1A

To Whom It May Concern,

Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457,

0.459), we are requesting the Commission to withhold the following attachment(s) as

confidential documents from public disclosure indefinitely.

●

●

●

● Operational Description

●

Tune-up Procedure

Schematic Diagram

Block Diagram

Part List

Above mentioned document contains detailed system and equipment descriptions that are

considered proprietary information in operation of the equipment. The public disclosure of the

above documents might be harmful to our company and would give competitors an unfair

advantage in the market.

In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the

Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and

the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information

remains confidential until the actual marketing of newly authorized devices. We are requesting

the commission to grant a short-term confidentiality request on the following attachment(s) for

180 days after the grant as outlined in Public Notice DA 04-1705.

●

●

● Test Setup Photos

● User Manual

It is our understanding that all measurement test reports, FCC ID label format and correspondent

during certification review process cannot be granted as confidential documents and those information

will be available for public review once the grant of equipment authorization is issued.

Best Regards,

External Photos

Internal Photos

_______________________

Nora Huen Ching, Yan

nora@plume.com