all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Statement user manual | Users Manual | 82.91 KiB | ||||
1 |
|
user manual | Users Manual | 1.12 MiB | ||||
1 | Attestation Statements | |||||||
1 | RF Exposure Info | |||||||
1 | RF Exposure Info | |||||||
1 | Cover Letter(s) | |||||||
1 | Internal Photos | |||||||
1 | Cover Letter(s) | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | External Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Test Report | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Statement user manual | Users Manual | 82.91 KiB |
FCC Part90 Letter Date: 2019-04-17 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 TYPE OF QEUIPMENT: DMR Digital Radio FCC ID: 2AJGM-DM1706 Dear Sir/Madam, This equipment meets the requirements of the FCC Rules, Parts 90.203(e) and (g), as applicable. The operator can not program transmit frequencies using the equipments external operation controls. The operator cant program transmit frequencies using the equipments external operation controls. This is to certify that the requirements of 47 CFR Part 90.203(j)(4) and (5) spectrum efficiency are met by the Is Digital Radio as demonstrated by the tests conducted on the sample radio provided. The tests show that the 4FSK data rate is in accordance with ETSI TS 102 361-1, that is 9600 bits per second in a 12.5 kHz bandwidth to satisfy the data rate requirement of 4800 bits per second per 6.25 kHz of channel bandwidth (7K60FXD emissions). Additionally the Is Digital Radio uses the AMBE+2 half-rate vocoder to compress 60 ms of normal bursts are sent in alternate 30 ms TDMA slots and so comply with the equivalence of one voice channel per 6.25 kHz bandwidth
(7K60FXW emission). Additionally the radio also meets the requirement of one voice channel per 12.5kHz of channel bandwidth for analogue speech (11k0F3E emission). Sincerely Yours, Signature:
Peter wang Engineer
1 | user manual | Users Manual | 1.12 MiB |
OWNERS MANUAL DIGITAL PORTABLE RADIO To users:
Thank you for your favor with our products. We are dedicated to providing high performance and high stability radio communication products. This two-way radio is no exception. The radio is a DMR dual-slot digital walkie-talkie developed and produced by my team with 1024 memory channels, full-color LCD display and full keyboard hand-tuning function. In order to make you fully understand the various advantages of the radio performance and use and maintenance methods, please read this manual carefully. Main Features Broadband walkie talkie Support UV double segment, frequency range UHF400.000-470.000MHz / VHF136.000-174.000MHz DMO True2-Slot dual time slot Direct mode dual-slot communication achieves two groups of calls at a frequency point at the same time, so that the communication efficiency is doubled and frequency resources are saved Digital and analog compatible, smooth over Support DMR digital and analog two communication modes to ensure that the original analog products smooth transition to digital products to meet different communication needs Digital signaling function Rich calling modes that support DMR protocol, including single call, group call and all call; supports remote inhibit function and other applications SMS function Supports SMS, text editing and draft in 250 characters in Chinese and English, so that text messages calls can be sent when voice call is inconvenient High sound quality This digital two-way radio uses advanced AMBE +2TM voice processing technology to achieve high quality Manual writing-frequency 1 OWNERS MANUAL DIGITAL PORTABLE RADIO Contents Familiar with this Product ............................................................................................................. 6 Security and overview ....................................................................................................................................... 7 Preparation before use ................................................................................................................. 8 Basic operation ................................................................................................................................ 11 Emergency alarm function ................................................................................................... 15 Send emergency alert ................................................................................................................................... 16 Receive emergency alert .............................................................................................................................. 16 Send an emergency alert with voice follow ....................................................................................... 17 Initiate an emergency call .......................................................................................................................... 18 Restart emergency mode........................................................................................................................... 18 Exit emergency mode ................................................................................................................................. 18 Menu operation ...................................................................................................................... 19 How to use the menu ................................................................................................................................. 20 Contact list settings ...................................................................................................................................... 20 Group call from the contact lists
................................................................................................. 20 Single call from your contact list
................................................................................................. 21 Call recording function ................................................................................................................................... 24 Check the latest call number ................................................................................................................. 24 Unanswered call screen .......................................................................................................................... 24 Delete the call in the call list ................................................................................................................. 24 Message function
...................................................................................................................................... 25 Edit and send messages ......................................................................................................................... 25 2 OWNERS MANUAL DIGITAL PORTABLE RADIO Send shortcut text .................................................................................................................................... 25 Using one-calling key to send shortcut text ..................................................................................... 26 Manage unsuccessfully sending short messages ............................................................................ 26 Manage outgoing sent ........................................................................................................................... 26 Receive the message ....................................................................................................................................... 28 View the message ................................................................................................................... 28 Manage incoming message .................................................................................................................. 28 View the message in the inbox ....................................................................... 28 Reply short message in the inbox ........................................................................................................ 28 Delete messages from the inbox ......................................................................................................... 29 Delete all message in the inbox .............................................................. 29 Encryption .......................................................................................................................................................... 29 Basic encryption ........................................................................................................................................ 30 Scanning list ....................................................................................................................................................... 30 Start and stop scanning .......................................................................................................................... 30 Press the presetscan switchkey or enter the scan menu function. The menu operation is as follows: ....................................................................................................................................................... 30 Scanning instructions and methods .................................................................................................... 31 Scanning reply ........................................................................................................................................... 31 Menu setting .................................................................................................................................... 32 Radio set ..................................................................................................................................................... 32 Talk around ................................................................................................................................................. 32 Tones/Alerts ............................................................................................................................................... 32 3 OWNERS MANUAL DIGITAL PORTABLE RADIO Silence ................................................................................................................................................. 33 Turn on or off Keypad Tone ........................................................................................................... 33 6. PressMENUto On,then press the [MENU] key to confirm that the key Beep is enabled. The display shows Key Beep On. ................................................................................................. 33 or PressMENUto off,then press the [MENU] key to confirm turning off the keyboard sound. The screen displays Key Beep Off ................................................................................... 33 Turn on/off channel Notify ............................................................................................................ 33 TX Power ..................................................................................................................................................... 34 Set backlight .............................................................................................................................................. 34 Squelch ........................................................................................................................................................ 35 Screen .......................................................................................................................................................... 35 Keypad lock ................................................................................................................................................ 35 Language .................................................................................................................................................... 36 Turn LED on or off .................................................................................................................................... 36 Vox ................................................................................................................................................................ 36 Clock ............................................................................................................................................................ 37 Time ...................................................................................................................................................... 37 Date ...................................................................................................................................................... 38 Radio information search ....................................................................................................................... 40 ID Check the Radio ID ........................................................................................................ 40 Check the Radio version ........................................................................................... 40 Radio configuration
.......................................................................................................................... 40 Receiving frequency ............................................................................................................. 41 Transmitting frequency ........................................................................................................................ 41 4 OWNERS MANUAL DIGITAL PORTABLE RADIO Transmit time-out timer.......................................................................................................................... 41 Color code
........................................................................................................................................... 42 Time slot
............................................................................................................................................... 42 CTCSS ........................................................................................................................................................... 42 Trasmitting CTCSS/DCS ................................................................................................................... 43 Receiving CTCSS/DCS ...................................................................................................................... 43 5 OWNERS MANUAL DIGITAL PORTABLE RADIO Familiar with this Product 1. Description of Buttons
[PTT]Transmit button Switch between transmission and reception; when transmitting, press this button and speak to the microphone; release the button to receive. Side button SK1 mode when this button is pressed, and return to the receive squelch mode when the button is pressed Short press is the monitor function (only analog channels are supported). Switch to the monitor squelch again. Side button SK2 Long press for the power switch, select the high and low power. Short press this button to quickly switch between the upper and lower screens and switch between the A screen and the B screen. Long press this button to enter the digital contact. Top button Short press this button to end the emergency alarm mode.
*Default is the alarm button Press and hold this button to activate the emergency alarm mode to quickly establish an emergency call. Default: 0~9
[0~9] code words in DTMF function 0-9 number buttons Select punctuation marks or letters in Pinyin input method. If numeric shortcut function is set, you can press and hold this button to jump to the corresponding contact. Press it to activate the menu mode, enter the menu and press this button to select menu items.
[MENU] button
[]button
[]button Press and hold it to enter the radio settings. Channel mode, changing the channel backwards. Move left in SMS editing interface. Channel mode, changing the channel forward. Move right in SMS editing interface. In standby mode, short press to switch between dual-segment single-standby or dual-segment
[Exit]/[Clear] button dual-standby mode. Clear the entered information in input state. Press and hold this button to switch channel mode or frequency mode.
[*]button
[#]button Press and hold this button to lock on / off keyboard Code word * in DTMF function Switch the input method in input method interface. Code word # in DTMF function 2. Programmable Buttons In order to improve the operational convenience, the function shortcut keys provided by this product are SK1 key, SK2 key, TK1 key. For the specific function, please consult the distributor. For the detailed description of each function, please refer to the corresponding contents of "Function and Operation". 6 OWNERS MANUAL DIGITAL PORTABLE RADIO No. Shortcut name Purpose 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 None No function is assigned to the preset button. Power adjustment Quickly switch between high power and low power. Emergency mode on Quickly establish an emergency call. This is the recommended option for the orange button. Emergency mode off Quickly end an emergency call initiated outward. Offline Encryption VOX Push to talk 1 Contact Area up Area down Area switching Keypad lock Steady state monitoring Press this button to toggle the host between pass-through mode and transit mode. Quickly turn on/off encryption for channel (only for digital mode). Quickly turn on or off the voice control function. Call shortcuts, after pressing a one-click call, send the corresponding call, SMS or other application function. Press this button to enter the digital contact list to initiate a call or call related services. Press this button to switch to the previous area. Press this button to switch to the next area. Quickly select areas that allow users to switch between the two areas. Quickly lock the numeric keypad (not including the PTT button). Switch to the monitor squelch mode when this button is pressed, and return to the receive squelch mode when the button is pressed again. Battery power indication constantly in green, the battery power is still available if the LED is constantly in yellow, and the battery power is low if the LED is Quickly access to battery power. The user can check the battery status by LED. The battery power is sufficient if the LED is Scan on / off Scan backup Recording switch Previous recording Next recording in red. Quickly turn the scan function on or off. Note: double-segment double-waiting scan does not work Press this button
(Based on firmware) to quickly turn on/off the recording
(Based on firmware) to quickly play back the previous recording.
(Based on firmware) to quickly play back the next recording. Scheduling (1750Hz pilot) Fast launch 1750 pilot signal Temporary deletion of noise When the scan is paused, pressing this button temporarily deletes the temporarily unwanted noise channel. The channel is not channels Time broadcast Flashlight detected during the next scan detection. When the host restarts scanning, the channel will be restored in the scan list. Press this button to broadcast the current time. Press this button to turn on the flashlight and press it again to turn off the flashlight. Up and down screen switch Quickly switch the upper and lower screen Working alone Press this button to switch between the individual work functions on and off. Note:
The same button short press and long press can achieve different functions, specific by the dealer settings. Security and overview RF radiation information This product is intended for professional applications that meet RF radiation requirements. Users must be aware of the hazards of RF radiation and take appropriate measures to meet the requirements of RF radiation limit. Common sense in RF radiation RF refers to the electromagnetic frequency that can be radiated into space. It is a technology widely used in the fields of communication, medical treatment and food processing. It will produce some RF radiation during use. Control and operating instructions of RF radiation In order to maximize the performance of the product and to ensure compliance with the radiation limits in the relevant occupational or controlled environment of the above criteria, the sending time shall not exceed 50% of the rated factor and shall follow the instructions below:
7 OWNERS MANUAL DIGITAL PORTABLE RADIO RF radiation is generated only during transmission (speech) rather than reception (listening) and standby. The distance between the terminal and the body during transmission should be at least 2.5 cm. Preparation before use Charging Be sure to ensure that the product is off when charging. Battery into the charger may be charging red flashing constantly flashing, this is the battery power is too low, the charger to protect the battery pre-charge process, is a normal phenomenon, Generally continue for 30 seconds to turn the red light of the normal state of charge. Please use the charging seat specified by our company to charge the battery, the charging seat indicator shows the charging status. 1. Plug the power adapter into a power outlet;
2. Plug the other end of the power adapter into the socket on the back of the charging cradle;
3. Insert the battery or the battery-equipped product into the charging cradle correctly; the indicator light on the charging cradle shows the charging status. When the indicator light is red, it indicates the start of charging. When the indicator turns green, the charging is completed. The specific table below. Indicator display Current charge status Red light Green light Note:
In charging The charging is completed For best battery performance, charge for a minimum of 4 hours on first charge. Battery information The first use of the battery Since the battery is not fully charged at the factory, please charge the new battery before use. Under normal circumstances, the battery when used for the first time, need to charge 4 hours, lithium-ion battery charging using slow charge or fast charge can be performed when charging. It is recommended that the new battery be operated as above for the first three uses. When you find the battery power is low, you need to charge the battery. Suitable battery type Please use the specified battery for charging; use of other batteries may cause explosion, resulting in human injury. Battery safety attention 1. Do not allow metal contacts (including coins, keys, jewelry, or other conductive metal) to be touched by the battery contacts or pole pieces. Otherwise, the battery may short circuit, discharge, heat or leak, which may result in damage to the item or personal injury. Therefore, be careful when handling any battery. 8 OWNERS MANUAL DIGITAL PORTABLE RADIO 2. Do not short-circuit the battery terminals or discard the battery in a fire. Do not disassemble the battery pack. When the battery is discarded, please put into a dedicated battery recycling box. Battery normal operation instructions Please charge the battery indoors, battery charging at room temperature best. Under normal circumstances, the charger indicator from red to green when the battery is fully charged, at this time the battery can be removed. You can charge when Battery installed in the walkie-talkie, but when charging is best to turn off the walkie talkie, to ensure that the battery is fully charged. Please do not charge the battery when the battery power is not used up (after the battery is exhausted, the voice prompt alarm will be given), which will shorten the service life of the battery. Do not put a fully charged battery back on the charger to "power up" again, as this operation significantly reduces the cycle life of the battery. Extend battery life Battery performance will reduce below -20 temperature conditions. Prepare back-up batteries for use in colder weather. Please do not throw away cold batteries that cannot work. These batteries may be used at room temperature. Dusting the battery contacts may affect the battery life. Please wipe the contacts with a clean, dry cloth before inserting the batteries into the walkie-talkie. Battery storage needs to know 1.Since the battery will have a self-discharge phenomenon, the battery when not in use for a long time, please fully charge the battery and then stored to avoid over-discharge of its battery to damage the battery. 2. When the battery is in storage, remove the battery to recharge when stored about 6 months. To avoid over-discharge of electrolyte affect battery capacity. 3. Pay attention to the temperature and humidity of the battery storage environment. Store the battery at room temperature in a cool, dry place to minimize self-discharge of the battery. Battery Voltage & Power Indication If the dealer has set the battery power prompt shortcut key for the product, you can press and hold the shortcut key to check the remaining battery power by LED indicator, tone and battery icon. Release the shortcut to cancel viewing the remaining battery power. The top right of the screen shows the current battery power icon is as follows:
Battery icon Battery power High Medium Low 9 OWNERS MANUAL DIGITAL PORTABLE RADIO Insufficient Accessories installation 1. Install / remove the antenna Turn off the radio and insert the antenna into the mounting hole and turn clockwise. (Figure 1-1) When removing the antenna, turn it counterclockwise to remove the antenna. (Figure 1-2) Do not shake the top of the antenna by hand, otherwise it will reduce the working performance and service life of the antenna. 2. Install / remove the battery Install the battery Align the battery with the battery holder on the back of the walkie-talkie. Push the battery firmly into the walkie-talkie and slide the battery up until it locks into place. (Figure 2-1) Remove the battery To remove the battery, turn off the transceiver. Slide the battery latch into the unlocked position and hold, and then slide the battery downward and out of the battery mount.(Figure 2-2) 3. Install / remove the belt clip Unscrew the two screws on the battery. Align the two screw holes in the belt clip with the screw holes in the top of the battery, and then tighten the screws (Figure 3) Loosen and remove the screw from the belt clip (it is recommended that you screw the screw to the battery for the next time you are installing and using the belt clip). 4. Install external headphones / microphone (optional separately) Open the headset cover, the headset plug into the headset hole will be ok. When you do not need to use the headset, unplug the headset plug from the earphone jack and cover the earphone cap. When not using the universal interface, please cover the dust cover.
(Figure 4) Status indication LCD Description of LCD Icons Icon name Icon Description of product status Signal strength icon Transmissio n power icon Dumb audio icon Speaker icon Relay mode icon The more signal bars, the stronger the signal is The current channel transmits at high power The current channel transmits at low power CT DCS Current ctcss is analog ctcss. Current ctcss is digital ctcss. Speaker is enabled, and reception is effective The current transmission frequency is the reception frequency plus a frequency bias (positive bias) The current transmission frequency is the reception frequency minus a frequency bias (negative bias) 10 OWNERS MANUAL DIGITAL PORTABLE RADIO Scan icon Non-priority channel Priority channel 1 Priority channel 2 Battery power icon VOX icon Pointer icon Currently in offline state The scan is on and is in normal mode Scan stays on non-priority channel Scan stays on priority channel 1 Scan stays on priority channel 2 The more bars, the more battery power Voice control is turned on Currently pointing to the main digital mode; press A/B button to switch the main channel up and down. When double-waiting is turned on and works in digital sub-channel, the icon is Currently pointing to the main analog mode; press A/B button to switch the main channel up and down. When double-waiting is turned on and works in analog sub-channel, the icon is LED LED Indicators This product has LED indicators so you can easily grasp the current operating state. Indicator status Product status Red on Green on Orange flash Transmitting Receiving Scanning Basic operation Power on and off To turn on the power, turn the [Power Switch / Volume Control] knob clockwise until you hear a "click" sound and a short beep sounds. To turn off the radio, turn the knob counterclockwise until you hear a click. In English language, if voice announcement is enabled, the channel is broadcast when the terminal is powered on or when switching channels. If you disable the tone function of this product, there will be no boot tone. If all LED's are disabled, the transmit / receive light does not come on during turning on. A short beep sounds to indicate successful boot detection. Volume adjustment Turn on the power, turn the [Power Switch / Volume Control] knob clockwise to increase the volume of voice reception, and turn counterclockwise to reduce the volume of voice reception. When adjusting the volume, the product LCD displays the corresponding length of the volume bar. Selecting Region 11 OWNERS MANUAL DIGITAL PORTABLE RADIO Region is a channel group in which you can include channels with the same attributes (such as call type, digital mode and analog mode) in a region, which makes it easy for you to manage existing channels. The unit supports up to 250 regions, and each region contains up to 64 channels. You can select a region in two ways:
Select by programming button:
If the dealer has set the [Zone Up] and [Zone Down] shortcuts for you, press this shortcut to switch to the desired area. Select through the menu:
1. Press the [MENU] key to enter the menu mode. 2. Press the /key to enter the area, and then press the [MENU] key to select the entry area list. 3. The current area is displayed on the screen and displayed as the area name. 4. Press the /key to enter the desired area, and then press the [MENU] key to select. 5. The screen immediately displays the selected area and returns to the selected area screen. The walkie-talkie must retain at least one area, and each area retains at least one channel. Digital and analog channel switch Each channel in this product can be configured by the dealer as either an analog channel or a digital channel. If the current region contains digital channels and analog channels, you can switch channels to analog channels or digital channels. Single / dual band mode switch If the dealer has set the [up and down screen switching] shortcut key (NamelyA/B key) for you, press this shortcut key to switch the upper screen or the lower screen. When the radio is standby, press A/B key to switch the primary and secondary channels. 1. The black pointer points to the primary channel and is the digital channel; the other channel is the secondary channel. If the black pointer points to the primary channel and indicates that the channel is an analog channel; the other channel is the secondary channel. 2. Press BACK to switch to dual band single standby or dual band dual standby If the front of the sub-channel is displayed , it indicates that the product is working in the mode of dual band single standby ", and the sub-channel does not receive the signal at this time. Note: The ARTS Auxiliary function does not work because the dual keep mode is in the primary and secondary channel scanning status, DTMF, auto-scan and work alone. Select channel, user ID, group call ID Power on and in channel mode, if you have more than one region in the radio, select the desired region and press/key to select the desired channel, user alias or ID, or the group alias or ID. Receive and reply group calls To receive a call from a user group, the transceiver must be configured to belong to the talk group. When receiving a group call:
1. LED indicator light is green. 2. The top line of the screen displays status icons such as RSSI. In the display area below the top line: the first line shows the group alias, the group call icon is displayed in the middle and the received target band (ie CH A or CH B) is indicated, and the caller ID is displayed at the bottom (digital mode only). 3. Hold the walkie talkie in its upright position and at a distance of 1 to 2 inches (2.5 to 5.0 cm) from the mouth. If the Channel Free 12 OWNERS MANUAL DIGITAL PORTABLE RADIO Tone function is enabled, when the transmitting radio releases the PTT button, you will hear a short beep indicating that the channel is idle and waiting for your answer. 4. Press the PTT key during the call hold time to reply to the call and the LED indicator lights up in red. 5. Release the PTTkey to answer. 6. If there is no voice activity for the scheduled time period, the call is terminated. If the walkie talkie receives a group call and is not at home at this time, it remains on the current screen until the call is answered. Receive and reply single call A single call is an individual walkie-talkie call to another individual walkie-talkie. There are two types of single call types: the first type, the walkie talkie presence test is performed before the call is ready, and the other type is ready for the call immediately. When receiving a single call:
1. LED indicator light is green. 2. The top line of the screen shows the status icons such as RSSI. In the display area below the top line, The first line shows a single call, the single call icon is displayed in the middle and the received target band (ie CH A or CH B) is indicated, and the user alias or ID is displayed at the bottom (digital mode only). 3. Hold the walkie talkie in a vertical position and keep it 1 to 2 inches (2.5 to 5.0 cm) from the mouth. If the "Channel Idle Tone" feature is enabled, when the transceiver intercepts the PTT key, you will hear a short beep indicating that the channel is free for you to answer. 4. Press the PTT key during the call hold time to reply to the call and the LED indicator lights up in red. 5. Release the [PTT] key to answer. 6. If there is no voice activity for the scheduled time period, the call is terminated. Receive all call All call is an individual walkie-talkie call to all walkie-talkies on the channel. It is used to publish important notices that require special attention from users. When receiving all call:
1. LED indicator light is green. 2. The top line of the screen shows the status icons such as RSSI. In the display area below the top line: The first line displays the full call, the full call icon is displayed in the middle and the received target band (ie CH A or CH B) is indicated, and the user alias or ID is displayed at the bottom (digital mode only). 3. After the termination of all calls, the walkie-talkie will return to the screen before receiving the call. If "channel idle tone" is enabled, you will hear a short tone when the walkie talkie releases the [PTT] key, indicating that the channel is ready for use and you cannot reply to all calls. When you receive an all call, if you switch to another channel, the transceiver stops receiving the full call. During a full call, you will not be able to use any of the preprogrammed keys until the call is ended. Start a walkie-talkie call You can choose a channel, user ID or talk group in the following ways:
Channel mode Press / to select the channel Pre-programmed one-touch call button Address book list Select channel to initiate a call 13 OWNERS MANUAL DIGITAL PORTABLE RADIO Initiate group call To initiate a call to a user group, the transceiver must be configured to belong to the talk group. 1. Channel mode Press /to select the channel using the activated talkgroup alias or ID. 2. Hold the walkie talkie in its upright position and keep it at a distance of 1 to 2 inches (2.5 to 5.0 cm) from the mouth. 3. Press PTT key to initiate a call, LED indicator light is red. The screen displays the talk group alias or ID, as well as the group call icon. 4. Release the [PTT] key to answer. When the target radio replies, the LED indicator will light green. The group call icon, call group alias or ID, and walkie talkie alias or ID is displayed on the screen. 5. If the Channel Idle Tone feature is enabled, when the target radio releases the PTT button, you will hear a short beep indicating that the channel is free for you to answer. Press the PTT key to answer, or if there is no voice activity for a predetermined period of time, the call is terminated. 6. The walkie talkie returns to the screen before receiving the call. You can also initiate a group call from your address book. Start a single call 1.Channel mode Press /to select the channel using the activated talkgroup alias or ID. 2. Hold the walkie talkie in its upright position and keep it at a distance of 1 to 2 inches (2.5 to 5.0 cm) from the mouth. 3. Press PTT key to initiate a call, LED indicator light is red. The top line of the screen shows status icons such as RSSI. In the display area below the top line, the first line shows a single call, the single call icon is displayed in the middle, and the user alias or ID is displayed at the bottom (digital mode only). 4. Release the [PTT] key to answer. When the target radio replies, the LED indicator will light green. 5. If the "Channel Idle Tone" feature is enabled, when the target radio releases the [PTT] key, you will hear a short beep indicating that the channel is free for you to answer. Press the PTT key to answer, or if there is no voice activity for a predetermined period of time, the call is terminated. 6. You will hear a short tone, the screen shows the call ended. You can also initiate a single call via digital contacts and manual dialing in your contacts, or make quick contact access via a keyboard entry to find the desired target walkie-talkie. Initiate all call This feature lets you signal all users on the channel. The walkie-talkie must be programmed to allow you to use this feature. 1. Channel mode Press/to select the channel using the activated all-call group alias or ID. 2. Hold the walkie talkie in its upright position and keep it at a distance of 1 to 2 inches (2.5 to 5.0 cm) from the mouth. 3. Press PTT key to initiate a call, LED indicator light is red. The screen displays the all-call group alias or ID, as well as the all-call icon. Channel users cannot reply to all calls. Use the one-touch call button to initiate a group call or a single call One-touch calling features make it easy to group calls or single calls to predefined aliases or IDs. This function can be assigned to short programming or long programming keys. You can assign only one alias or ID to a one-touch call key, and the walkie talkie can have multiple programmed one-touch call keys. 1. Press the preprogrammed one-touch call button to initiate a group or single call to a predefined alias or ID. 2. Hold the walkie talkie in its upright position and keep it at a distance of 1 to 2 inches (2.5 to 5.0 cm) from the mouth. 3. Press PTT key to initiate a call, LED indicator light is red. The screen displays the talk group / user alias or ID, as well as the group call / callout icon. 14 OWNERS MANUAL DIGITAL PORTABLE RADIO 4. Release the [PTT] key to answer. When the target radio replies, the LED indicator will light green. 5. If the "Channel Idle Tone" feature is enabled, when the target radio releases the [PTT] key, you will hear a short beep indicating that the channel is free for you to answer. Press the PTT key to answer, or if there is no voice activity for a predetermined period of time, the call is terminated. 6. The walkie talkie returns to the screen before receiving the call. Analog channel call On the analog channel, hold down the [PTT] key and speak into the microphone, to transmit. Please release PTT key to receive. DTMF call Make a call:
under the analog channel, press and hold the [PTT] key and press the keypad number key. Under analog channel, long press # key to switch to manual dialing mode, enter the desired number, short press PTT key to start DTMF call. Receive calls:
When the host computer has configured DTMF as the receiving signaling system of the current channel, when decoding the code word is DTMF personal ID code, the decoding is successful. During the resetting time, it can talk to the other party. The reset time needs to be re-decoded. PTT ID call Make a call In analog mode, you can program the radio to configure the DTMF on-line code and off-line code; and enable the up-down-line code on the analog channel. When enabled, the code will be sent each time the [PTT] key is pressed, and the code will be released when the
[PTT] key is released. Emergency alarm function Emergency alarm In the event of an emergency, you can use this feature to ask your fellow or control center for help. Emergency alarm has the highest priority, you can alarm whether the walkie talkie is transmitting or receiving. Alarm initiator to exit the alarm mode, there are two cases:
Turn off the radio to exit the whole machine alarm. Press the pre-programmed [emergency mode off] shortcut to exit the alarm In other ways, when exiting alarm mode, the alarm on the current channel can only be temporarily exited. When reselecting the channel, the alarm will continue;
The alarm function is enabled for you by the dealer (program path: "Edit -> Alarm -> Digital Emergency Alarm System ->DMR System"). Alarm Type The radio prompts in different modes for different alarm types, as shown in the following table. Alarm type Description Disable Turn off alarm function (alarm disabled), Only whistle The terminal emits a sharp alarm tone and the control center does not receive an alarm signal. Convention al Alarm whistle Silent When alarms, the radio gives an audible and visual prompt. After sending an emergency alert signal to the control center, a local alarm tone is sounded. In the alarm state, there are indications of sound and visualization. When alarms, the radio will not give any audible or visual prompt. At the same time, no sound is 15 OWNERS MANUAL DIGITAL PORTABLE RADIO made on any received audio. Silence with voice When alarms, the radio will not give any audible or visual prompt. However, the radio sounds when you press and hold the PTT button to initiate a call or respond to a call. Alarm Mode Except the alarm type Disable,Only whistle, alarm whistle, other alarm types support the following alarm modes. You can ask the dealer to select one of them (Note: The following methods use Conventional alarm type as an example). Alarm mode Description Emergency In this mode, you can press and hold the [Emergency mode on] button to send an alarm tone alarm to your partners or control center but cant talk to the other party. Emergency In this mode, you can press and hold the [Emergency mode on] button to send an alarm tone alarm and call to your partners or control center, and then press and hold the [PTT] button to speak to the
(alarm call) microphone, and your voice and surrounding background sound will be sent to the receiver. Emergency In this mode, you can press and hold the [Emergency mode on] button to enter the alarm alarm voice and transmission channel. The product automatically activates the emergency microphone
(without holding down the PTT button). You can speak to the microphone, and your voice and
(emergency the surrounding background sound will be sent to receiver. call) Send emergency alert This feature allows you to send an emergency alert, which belongs to a non-voice signal and will trigger a prompt on another transceiver. 1. Press the preprogrammedAlarm On button. 2. The screen displays Send Alert, alternating with walkie talkie ID. The LED is lit red and the emergency call icon appears on the home screen. 3. When an emergency alert confirmation is received, an emergency call tone sounds and the LED flashes green. The screen shows that the emergency alert was successful. Or if the walkie talkie does not receive any emergency alert confirmation and a beep sounds after all retries are exhausted, the screen displays failed emergency alert. 4. The walkie-talkie exits the emergency alert mode and returns to the home screen. If your walkie talkie is set to "silent," it will not show any voice or visual cues in emergency call mode. Receive emergency alert 1. The number of alerts received when an emergency alert was received, along with the alert that was received, alternating with the sender's alias or ID. 2. A beep sounds and the LED flashes orange. 3. If enabled, your transceiver will automatically acknowledge the emergency alert. When the walkie talkie receives an emergency alert, the screen displays a prompt that an emergency alert has been received, until an acknowledgment is sent and the emergency mode exits. You will not be able to receive any other prompts or show any other calls until you exit the screen for receiving an emergency alert. When an alarm sounds, the LED indicator flashes orange, and any key can be pressed to stop the alarm tone. The current 16 OWNERS MANUAL DIGITAL PORTABLE RADIO emergency mode is released by switching channels or turning off the radio. Send an emergency alert with voice follow This feature allows you to send an emergency alert to another transceiver. After confirmation, your walkie talkie microphone is activated automatically, allowing you to communicate with other radios without pressing the [PTT] key. This activated microphone status is called
"Emergency Microphone". If the [PTT] key is pressed during the preprogrammed emergency microphone launch, the transceiver ignores
[PTT] press and remains in emergency mode. 1. Press the preprogrammed [Alarm On] button. 2. The screen displays send an alert, the LED is lit red and the emergency call icon is displayed. 3. When the alarm confirmation of another intercom is received, the message send successfully is displayed, the LED indicator lights up in red, the radio of the intercom automatically activates and emits a signal, and speaks clearly to the microphone until the end of the thermal mic. If the emergency alert request fails (such as the target radio that received the alert is not turned on or is not on the pre-programmed alert jump channel), the screen briefly displays No Reply and the walkie-talkie will continue to send emergency calls. 4. The hot mic duration ends and stops transmitting. The screen displays Emergency Call and the contact and intercom ID alternate. The LED indicator lights up in orange and is accompanied by a local alarm tone until the end of the reception duration. 5. After the number of emergency calls of the walkie-talkie is completed, it will automatically stay on the emergency call alarm interface. Press the pre-programmed [Emergency Mode Off] button, the screen displays Cancel Alarm and exits the emergency mode. Or cancel the current emergency mode by switching channels. Receive an alert call The walkie-talkie that receives the emergency call must be selected to the pre-programmed alarm-jump channel and the jump channel must be a group call. 1. Upon receiving an urgent alert request, the screen displays Alarm Received and is displayed alternately with the sender's alias or ID. 2. An alarm tone sounds and the LED indicator flashes orange. 3. The alarm tone stops, the LED indicator lights up in green, enters the receiving state, and listens to the other party's speech until the end of the hot microphone. 4. When an alarm tone sounds, the LED indicator flashes orange. Hold the intercom in a vertical position and keep it 1 to 2 inches (2.5 to 5.0 cm) from the mouth. 5. Press the [PTT] key to initiate the call, the LED indicator lights up in red, and the talk group icon appears on the screen. 6. Release the [PTT] button to answer. When an alarm sounds, the LED indicator flashes orange, and any key can be pressed to stop the alarm tone. The current emergency mode is released by switching channels or turning off the intercom. 17 OWNERS MANUAL DIGITAL PORTABLE RADIO Initiate an emergency call After the alarm is activated, the alarm code is not required to be sent for an impolite number and politeness, and the host immediately initiates an emergency call. Once confirmed, your walkie-talkie microphone is automatically activated, allowing you to communicate with other walkie talkies on the pre-programmed alarm jump channel without pressing the [PTT] key. This activated microphone state is called a "hot mic". During the pre-programmed hot mic duration, in addition to pressing the pre-programmed [emergency mode off] key to cancel the alarm, pressing any other button will remain in emergency mode. Until the end of the thermal mic. 1. Press the pre-programmed [Emergency Mode On] button. 2. The LED indicator lights up in red and the emergency call icon appears on the main screen. 3. The radio of the walkie-talkie automatically activates and emits a signal, speaking clearly to the microphone until the end of the thermal mic. 4. The hot mic duration ends and stops transmitting signals. The screen displays Emergency Call and the contact and intercom ID alternate, and the LED indicator lights up in orange until the end of the reception duration. 5. During the duration of the reception, you can answer the other party's call. Press the pre-programmed [Emergency Mode Off] button, the screen displays Cancel Alarm and exits the emergency mode. Receiving an emergency call The walkie-talkie that receives the emergency call must be selected to the pre-programmed alarm-jump channel and the jump channel must be a group call. 1. Upon receiving an emergency alert, the screen displays the talk group icon and the sender's alias or ID alternately displayed. 2. The LED indicator lights up in green and listens to the other party until the transmitter's thermal mic duration ends. 3. With the LED off, hold the intercom away from the vertical position and keep it at a distance of 1 to 2 inches (2.5 to 5.0 cm). 4. Press the [PTT] key to initiate the call, the LED indicator lights up in red, and the talk group icon appears on the screen. Restart emergency mode It can happened in two situations:
When the transceiver is in emergency mode and changes channel, it will exit emergency mode. If an emergency alert is activated on the new channel, the transceiver resumes the emergency call. Press the preprogrammed [Alarm On] key in the emergency call start / transmit state. This way the walkie talkie will exit the status and restart the emergency call. Exit emergency mode The transceiver exits emergency mode when one of the following happened:
Receive emergency alert confirmation (emergency alerts only), or The number of major attempts to send an alert has been reached, or Press Preprogrammed [Alarm Off ], or Press the [PTT] key. 18 OWNERS MANUAL DIGITAL PORTABLE RADIO If the radio is turn off, it will exist the emergency mode. When you turn on again, the radio wont start resume emergency mode Individual Operation This feature is ideal for people who work alone. If you encounter unexpected situations during individual operation, you cant operate the radio in preset time. The radio will automatically send alarm to your partner or control center for help. 1.Turn on individual operation Press the preset [Individual Operation] shortcut to enable this function. 2. If you do not operate the radio in the preset response time, the radio will prompt before the response time is up (depending on the dealer settings). At this point, you can end the prompt with a valid physical operation (knob or button operation). When the response time is up, the radio will automatically turn on the alarm system of the current channel. 3. Turn off individual operation Press the preset [Individual Operation] shortcut again to turn off this function. Note: If you do not turn off the individual operation function before shutting down, the function is still active the next time you turn on the radio. Menu operation Menu navigation Press MENU key in digital mode or digital channel to enter the digital main menu; press MENU key in analog modem or analog channel to enter the analog main menu. The menu structure is shown as below, including all the menu items of the product. You can configure whether to display each menu item through the dealer. You need to first press MENU key to enter the main menu, then use / key to navigate the desired submenu or option and press MENU key to confirm and complete the setting . This document only describes the order of menu items when the menu operation is introduced.. For example, the path to the contact list is Contacts -> Contacts List. This product menu will auto reset if you do not operate on the menu during the preprogrammed time
(configured by the dealer), the product automatically returns to the standby screen. You can ask dealer to modify the auto reset time and cancel auto reset. Input Method You can enter user aliases, numbers and text messages via the keypad. This product supports the English input method, Simplified Chinese Pinyin input method, and number input method. When inputting user alias, ID or SMS, if there is no content in the editing area, press BACK to return to the last menu, Or if there is content in the editing area, press BACKwill delete a character in front of the cursor until Press [BACK] to return to last menu when no editing area exists. English Input Method 1. Press [#] to switch to uppercase (LCD shows ABC) or lower case (LCD shows abc) English input method. 19 OWNERS MANUAL DIGITAL PORTABLE RADIO 2. Press the number buttons repeatedly until the desired letter appears. Repeat the above steps to complete the input. Simplified Chinese Pinyin Input Method 1. Press [#] to switch to Pinyin input method (LCD shows PY). 2. Press number buttons to enter the pinyin, and the LCD shows the alternate pinyin and corresponding candidate Chinese characters. 3. Press []/ [] to select the desired pinyin. 4. Press the [MENU] button to move the highlight to the Chinese character area, and press []/ [] to select the desired Chinese character. 5. Press the [MENU] button to enter the selected Chinese character. Repeat the above steps to complete the input. Number Input Method 1. Press [#] to switch to number input method (LCD shows 123). 2. Press the number buttons 0~9 to enter the corresponding number. Input Special Characters Press number button [1] to enter commonly used punctuation and special characters. To enter a space, press the [0] button. Note: In the input text display area, press []/ [] to move the cursor left / right. How to use the menu 1. Press MENU to enter the menu mode, then press / on left or right to access the menu function;
2. Press MENU key to select a function or enter a sub-menu;
3.Press BACK to return to last menu. Contact list settings Contact list provides "Address Book" for radios . Each entry corresponds to an alias or ID used to initiate the call. In addition, each entry is related to one of three types of call depending on the setting: group call, single call, all call. Your walkie talkie supports digital contacts. The entry in the contact list shows the following information:
Call name Call property Call ID You can add, delete, or edit contacts to your digital contact list. Group call from the contact lists 1. Press MENU key to enter the menu mode. 20 OWNERS MANUAL DIGITAL PORTABLE RADIO 2. Press / key to contact list, then press MENU key to select, the items will be arranged in alphabetical order. 3. Press / key to digital contact list, then press MENU key to select, the items will be arranged in alphabetical order. 4. Press / to the desired group name or ID. 5. Hold the walkie talkie in its upright position and keep it at a distance of 1 to 2 inches (2.5 to 5.0 cm) from the mouth. 6. Press PTT key to initiate a call, LED indicator light is red. The screen displays the talk group alias or ID, as well as the group call icon. 7. Release the [PTT] key to receive. When any user in the group responds, the LED will light green. You will see the group call icon user ID on the screen. 8. If the "Channel Idle Tone" feature is enabled, when the target radio releases the [PTT] key, you will hear a short beep indicating that the channel is free for you to answer. Press the call key (PTT) to answer. If there is no voice activity during the preprogrammed group call hang-up time, the call is terminated. Single call from your contact list 1. Press MENU key to enter the menu mode. 2. Press / key to contact list, then press MENU key to select, the items are arranged in alphabetical order. 3. Press / key to digital contact list, then press MENU key to select, the items will be arranged in alphabetical order. 4. Press / to the desired user alias or ID. Or press / key to dial manually, then press MENU key to select. If there is a user alias or ID dialed previously, the ID is displayed with the blinking cursor and the keyboard is used to edit this ID. Or press / key to dial manually, then press MENU key to select, use keyboard to input a new ID. 5. Hold the walkie talkie in its upright position and keep it at a distance of 1 to 2 inches (2.5 to 5.0 cm) from the mouth. 6. Press PTT key to initiate a call, LED indicator light is red. The first line shows the user's alias or ID, the second line shows the single and single call icons. 7. Release the [PTT] key to answer. When the radio responds, the radio LED lights up green and the screen displays the ID of the transmitting user. 8. If the "Channel Idle Tone" feature is enabled, when the target radio releases the [PTT] key, you will hear a short beep indicating that the channel is free for you to answer. Press the call key (PTT) to answer. If there is no voice activity during the preprogrammed single call hang-up time, the call is terminated. 9. You will hear a short tone; the screen shows the termination of the call. If you release the PTT key while the walkie talkie is setting up a call, it exits without any hint and returns to the previous screen. walkie talkies can be preprogrammed to perform walkie-talkie presence detection prior to setting up a single call. If the target walkie talkie does not answer, you will hear a short beep, and the other party does not answer on the screen. The walkie-talkie returns to the menu before starting the walkie talkie presence test. Radio detection In digital mode, you can initiate radio detection to a contact without interfering with each other to confirm whether the other party has turned on the unit or uses in the current channel. Initiate radio detection 1.Press MENU key to enter the menu mode 21 OWNERS MANUAL DIGITAL PORTABLE RADIO 2. Press / key to contact list, then press MENU key to select 3.Press / key to the desired user alias or ID, then press MENU key to select.
- Or press / key to manually dial, then press MENU key to select, flashing cursor appears, input the user ID you want to call, then press MENU key. 4. Press/ key to Radio Check, the screen displays the radio check <User alias or ID>, and then press the [MENU] key to indicate that the call has been sent. 5.When the walkie talkie send radio detection, the LED indicator light is red. 6.If the target walkie talkie is active in the system, a prompt is emitted and the screen briefly shows Radio check success. Call prompt In digital mode, you can send call prompt to a contact, and the other party can call back directly. Initiate a call prompt 1.Press MENU key to enter the menu mode. 2. Press / key to contact list, then press MENU key to select 3.Press / key to the desired user alias or ID, then press MENU key to select.
-Or press / key to manually dial, then press MENU key to select, flashing cursor appears, input the user ID you want to call, then press MENU key. 4. Press/ key to call alert, the screen displays the call prompt: <User alias or ID>, and then press the [MENU] key to indicate that the call has been sent. 5.When the walkie talkie send a call prompt, the LED indicator light is red. 6.If you receive a call confirmation, a tone sounds and a call alert appears,and the LED indicator light is green.
- Or if no call alert confirmation is received, a beep sounds and the screen displays a call alert failure. Receive call prompt When you receive a call alert, the screen displays a call alert, alternating with the alias or ID of the calling walkie-talkie. Press the
[BACK] key to exit. Remote monitor Initiate remote monitor 1. Press MENU key to enter the menu mode. 2. Press / key to contact list, then press MENU key to select. 3. Press / key to the desired user alias or ID, then press MENU key to select.
- Or press / key to manually dial, then press MENU key to select, flashing cursor appears, input the user ID you want to call, then press MENU key. 4. Press/ key to Remote monitor, the screen displays the remote monitor <User alias or ID>, and then press the [MENU]
key to indicate that the call has been sent. 22 OWNERS MANUAL DIGITAL PORTABLE RADIO 5. When the walkie talkie send remote monitor, the LED indicator light is red. 6. Remote moni successdisplays if it is successful, and Remote moni fail displays if fails.. Receive remote monitor After receiving the remote monitor command, it automatically starts transmitting voice and surrounding environment background sound, and exits automatically when the transmission time is up. Radio remote kill In digital mode, you can send a remote inhibit command to a contact, so that the radio cant be used normally.User menu function Initiate remote kill 1. Press MENU key to enter the menu mode 2. Press/key to enter contact list, then press MENU key to select 3. Press/key to enter digital contact list, then press MENU key to select 4. Press/key to the desired user alias or IDCall attribute is single number 5. Press/key to enter application function,then press MENU key to select 6. Press/key to remote kill, then press MENU key to select, the screen displays Remote kill 7. When the radio sends a remote kill Command, the LED indicator lights up as a red light. 8. If you receive the confirmation of the remote kill, the prompt tone will be issued and the "radio will be remote killed successfully". Or if you do not receive the confirmation of the remote kill, a prompt is issued, and the screen shows that remote kill fails. Receive remote kill After receiving the command of the remote kill, the LCD screen is displayed as a white screen, and shows Remote kill. When the radio is remote killed, it will not be effective by pressing any key, and the radio will still be dead after turn on again. Radio activation In digital mode, you can send an activation command to a contact to resume normal use of the two-way radio. Initiate radio activation 1. Press MENU key to enter the menu mode 2. Press/key to enter contact list, then press MENU key to select 3. Press/key to enter digital contact list, then press MENU key to select 4. Press/key to the desired user alias or IDCall attribute is single number 5. Press/key to enter application function,then press MENU key to select 6. Press/key to radio activation, then press MENU key to select, the screen displays Radio Activation 7. When the radio sends a radio activation command, the LED indicator lights up as a red light. 8. If you receive the confirmation of radio activation, the prompt tone will be issued and the "radio will be activated 23 OWNERS MANUAL DIGITAL PORTABLE RADIO successfully". Or if you do not receive the confirmation of the radio activation, a prompt is issued, and the screen shows that radio activation fails. Receive radio activation After receiving the command of the remote kill, activate the prompt tone and turn off and turn on the radio again. Call recording function Your walkie talkie can record all recent incoming, answered and unanswered calls. Use the call record function to view and manage recent calls. Check the latest call number Select "call records" in the main menu, enter the Dialed call/answered call/ unanswered call list, and select contacts,then press PTT key to initiate a single call. 1. Press MENU key to enter the menu mode 2. Press/key to Call record, then pressMENUkey to select 3. The screen displays the "missed call/answered call/dialed call/deleted record" option,press/key to enter the required call list, then pressMENUkey to select. 4. The screen displays the most recent entries at the top of the list 5. Press /key to view the list,then press the PTT key to start the single call for the currently selected alias or ID. Unanswered call screen Whenever a call is missed, the radio screen displays the number of unanswered calls and unanswered callers, pressMENUkey to check or BACKkey check later. If you press PTTkey when looking at the unanswered call number, the radio leaves the unanswered call screen and creates a single call. 1. The screen displays "missed calls" and the number of missed calls. 2. PressMENUkey to enter the missed call list. The latest missed call entries are displayed at the top of the screen. 3. PressMENUto select to view, send information, or delete the entry. Delete the call in the call list 1. PressMENUkey to enter the menu mode 2. Press/key to Call record, then pressMENUkey to select 3. Press/key to Delete record,then pressMENUkey to select 4. The screen displays the "missed call/answered call/dialed call/deleted record" option, press/key to enter the deleted record,then pressMENUkey to select. 24 OWNERS MANUAL DIGITAL PORTABLE RADIO 5. The screen displays the "missed call /answered call / dialed call" option, press /key to select the call that to be deleted,then pressMENUkey to choose. 6. The screen displays "clear the call record" and returns to the previous level menu. Message function The radio supports DMR data function, and can send and receive messages. It can store up to 100 incoming messages and 100 sent messages. The maximum length of each message is 220 characters, and the number of SMS lines can not exceed 50 lines. Edit and send messages User menu function 1. PressMENUkey to enter the menu mode 2. Press/key to message, then pressMENUkey to select 3. Press/key to writing message, then pressMENUkey to select 4. There is a scintillation cursor, input SMS with the keyboard, move one bit to the left by pressing, move one to the right by, delete any useless character when the editing area has content, or return to the previous menu when the editing area has no content. 5. After writing the text message, press MENUkey to return to the previous menu quickly and find contacts then pressMENUkey to select. 6. Press/key to the desired user alias or ID, then pressMENUkey to select Or press/key to enter the manual dialing and input the target radio ID, then press MENUkey to select 7. Screen display "SMS sending...",make sure that a message is being sent. 8. If the message is sent successfully, a prompt will be issued, and the screen will display "SMS is sent successfully". Or if the message is not sent successfully, a high pitched tone will be issued, and the screen will display "SMS failure". Send shortcut text The radio supports at most 20 fast text messages programmed by agents. When you predefine SMS, you can edit it before sending every message. User menu function 1. PressMENUkey to enter the menu mode 2. Press/key to message, then pressMENUkey to select 3. Press/key to shortcut message, then pressMENUkey to select 4. Press/key to the needed shortcut message, then pressMENUkey to select 5. Press/key to display text content with a scintillation cursor, input SMS with the keyboard, move one bit to the left by pressing, move one to the right by, delete any useless character when the editing area has content, or return to the previous menu when the editing area has no content. 6. After writing the text message, press MENUkey to confirm the contents and select send and save. 25 OWNERS MANUAL DIGITAL PORTABLE RADIO 7. After sending message, press/key to enter contacts, and press / key to the desired user alias or ID, then pressMENUkey to select Or press/key to enter the manual dialing and input the target radio ID, then press MENUkey to select 8Screen display "SMS sending...",make sure that a message is being sent. 9. If the message is sent successfully, a prompt will be issued, and the screen will display "SMS is sent successfully". Or if the message is not sent successfully, a high pitched tone will be issued,radio will return to resend selection screen. Using one-calling key to send shortcut text 1.Press the preset one-calling key shortcut key to send a shortcut text to a predefined alias or ID. 2.Screen display "Message is sending...",make sure that a message is being sent. 3.If the message is sent successfully, a prompt will be issued, and the screen will display "SMS is sent successfully". Or if the message is not sent successfully, a high pitched tone will be issued, and the screen will display "SMS failure". Manage unsuccessfully sending short messages In the resend selection screen, you can choose the following options Resend Forward Edit Delete Resend message 1. Press MENUkey to send the same message to the same user/call group alias or ID. 2. If the message is sent successfully, a prompt will be issued, and the screen will display "SMS is sent successfully". Or if the message is not sent successfully, a high pitched tone will be issued, and the screen will display "SMS failure". Forward message Select and forward message to another user/call group alias or ID. 1. Press/key to reply, then pressMENUkey to select and find contacts. 2. Press/key to the desired user alias or ID, then pressMENUkey to select Or press/key to enter the manual dialing and input the target radio ID, then press MENUkey to select 3. Screen display "Message is sending...",make sure that a message is being sent. 4. If the message is sent successfully, a prompt will be issued, and the screen will display "SMS is sent successfully". Or if the message is not sent successfully, a high pitched tone will be issued, and the screen will display "SMS failure". Manage outgoing sent Once the message is sent to another radio, it will be saved in the "outbox". The latest sent SMS is always added to the top of the
"outbox" list. The Outbox folder can store up to 100 recently sent messages. When the folder is full, the next message will automatically change the old message in the folder. 26 OWNERS MANUAL DIGITAL PORTABLE RADIO At any time, pressBACKkey to return to the previous screen. View the sent message User menu function 1. PressMENUkey to enter the menu mode 2. Press/key to message, then pressMENUkey to select 3. Press/key to outbox, then pressMENUkey to select 4. Press/key to browse the SMS list of the inbox. If text messages come from e-mail programs,then a topic line will appear. 5. PressMENUkey to select and read the current message, then pressMENUkey to resend, forward, edit or delete the message. Resend the sent message When you view the sent text messages, you can choose the following options Resend Forward Edit Delete 1.When you look at a short message, pressMENUkey again 2.Press/key to resend, then pressMENUkey to select 3.Screen display "Message is sending...", confirm send the same message to the same target radio 4.If the message is sent successfully, a prompt will be issued, and the screen will display "SMS is sent successfully". Or if the message is not sent successfully, a high pitched tone will be issued, and the screen will display "SMS failure". 5.PressMENUto resend SMS to the same user/call group alias or ID. In addition to pressingMENUandBACKkey, if you change the volume and press any other key, you will return to this message. When you pressPTTto initiate a single call or group call, or to respond to a group call, the radio will exit the resend selection screen. If you receive SMS or remote sensing information, emergency call or alarm, or receive a call prompt, the radio will also exit the resend screen. If you respond to a single call byPTTkey(except when radio is showing the uncalled screen), or at the end of the full call, the screen display will return to the resend selection. Press /key enter to reply, edit, or delete the selection screen. Select reply, send the selected SMS to other call groups/user aliases or ID. Select edit, edit the selected SMS before sending it. Select delete, delete selected SMS. Delete all the sent SMS in the "outbox"
User menu function 1. PressMENUkey to enter the menu mode 2. Press/key to message, then pressMENUkey to select 27 OWNERS MANUAL DIGITAL PORTABLE RADIO 3. Press/key to delete message, then pressMENUkey to select 4. Press/key to outbox, then pressMENUkey to select 5. PressMENUkey when prompted"Delete the outbox?", and the screen display"SMS has been deleted". When you select the "outbox" but there is no SMS, the screen will display "empty box". Receive the message When your radio receives short messages, the screen displays "receive short messages"
If the promo screen is displayed on radio and pressPTTkey, radio will exit the SMS prompt screen and create a single call or group call. View the message 1. Radio send short message alert when receive short message, the screen display"receive SMS". 2. Read short messages by pressingMENUkey to confirm 3. PressMENUkey to return to the inbox Or pressMENUkey to reply, forward,edit and delete message. Manage incoming message Use the inbox to manage SMS. The inbox can store up to 100 messages. The radio supports the following short message options Reply Forward Edit Delete Store the text messages in the inbox according to the order of recent reception. At any time, pressBACKkey to return to the previous screen. View the message in the inbox 1. PressMENUkey to enter the menu mode 2. Press/key to message, then pressMENUkey to select 3. Press/key to inbox, then pressMENUkey to select 4. Press/key to browse the SMS list of the inbox. If text messages come from e-mail program, a topic line will appear. 5. PressMENUto select and read the current message, then press theMENUkey to reply, forward, edit or delete the message. Unread message with a sign
,read message with a sign
. Reply short message in the inbox User menu function 1. PressMENUkey to enter the menu mode 28 OWNERS MANUAL DIGITAL PORTABLE RADIO 2. Press/key to message, then pressMENUkey to select 3. Press/key to inbox, then pressMENUkey to select 4. Press/key to the required message, pressMENUkey to select and browse the current SMS. If text messages come from e-mail programs,then a topic line will appear. 5. PressMENUkey again to enter the submenu. Press/key to enter the reply, then pressMENUkey with the flashing cursor, enter the SMS editing state, and edit the short message with the keyboard. Or pressMENUkey and/key to insert shortcut text, and pressMENUkey and/key to select the required shortcut text, and then pressMENUkey with flickering cursor, if need, edit your message with the keyboard. 6.After writing SMS, pressMENUkey and/key to send, screen displayshort message is sending,make sure that a message is being sent. 7.If the message is sent successfully, a prompt will be issued, and the screen will display "SMS is sent successfully". Or if cannot send SMS, the screen will display "SMS failure". If the message fails, the radio will return to the resend selection screen. Delete messages from the inbox User menu function 1. PressMENUkey to enter the menu mode 2. Press/key to message, then pressMENUkey to select 3.Press/key to inbox, then pressMENUkey to select 4. Press/key to the required message, and pressMENUkey to select and browse the current SMS. If text messages come from e-mail programs,then a topic line will appear. 5. PressMENUkey again to enter the submenu. 6. Press/key enter to delete, then pressMENUkey to select 7. When display"confirm to delete?", pressMENUkey and the screen display"SMS has been deleted". 8. The screen returns to the inbox. Delete all message in the inbox User menu function 1. PressMENUkey to enter the menu mode 2. Press/key to message, then pressMENUkey to select 3.Press/key to delete message, then pressMENUkey to select 4..Press/key to inbox, then pressMENUkey to select 5. When screen display"delete inbox?", pressMENUkey and the screen display"SMS has been deleted". When you select "inbox" but there is no SMS, the screen displays "empty inbox". Encryption Encryption means encrypt the voice or data of the end-to-end , which provides reliable security for voice or data, and can effectively prevent eavesdropping or stolen. 29 OWNERS MANUAL DIGITAL PORTABLE RADIO Basic encryption Radio only can allocate one of the above encryption types. To decrypt the encrypted call or transmission data, the pre programmed radio must have the same "encrypted key" with transmitted radio(suitable for basic encryption). If your radio receives an encrypted call from a different encryption key or a different key value and a key ID, you will hear the sound of a messy transmission (basic type encryption). Press presetencryptionkey to turn on or off the encryption function.. In conventional mode, open encryption is the encryption of the current channel. When the channel is switched, the terminal will automatically turn on encryption. ANI Identity code display Scanning list Scanning means that when radio scanned on a channel and has activities, it will stay on the channel for listening, so as to understand the current activities of the relevant group members. The scanning list is a list of channels for radio scanning. Your radio can support 250 scanning lists at most, and each list has a maximum of 32 channels. Each scanning list supports the mixing of analog and digital channels. You can edit can lists to add/remove channels or set priorities for channels. Start and stop scanning Press the presetscan switchkey or enter the scan menu function. The menu operation is as follows:
1. Select a pre programmed scan list channel by pressing/key. 2. PressMENUkey to enter the menu mode 3. Press/key to scan, then pressMENUkey to select 4. Press/key to scan switch, then pressMENUkey to select 5. The screen displays the "open" and "close" options, press/key to open, and then pressMENUkey to confirm and activate scan. The LED indicator slowly flashes to orange and displays the scan icon If you press/key to close, then pressMENUto confirm and close scan. When the scan is turned off the LED indicator lights off and the scan icon is not displayed.
/ View/add a scan list 1.Select a pre programmed scan list channel by pressing/. 2.PressMENUkey to enter the menu mode 3.Press/key to scan, then pressMENUkey to select 4.Press/key to scan list, then pressMENUkey to select 5.Press/key to select the operated scan list, and pressMENUkey to select If you select "no", no scanning list is added. 30 OWNERS MANUAL DIGITAL PORTABLE RADIO 6.Press/key to enter edit/viewmenuthen pressMENUkey to select 7.Press/key to view the channel in the scan list and pressMENUkey to set or delete the priority channel in the scan list. Or select the "add channel" in the current scan list, then add a new channel by pressingMENUkey. 8.Select a channel in the current scan list If do not need to scan, you can choose todelete the channel to delete a channel in the current scan list, but you cannot delete the first channel in the scan list. If need to listen the activities of a channel first, you can choose the "priority channel" as the priority channel 1 or the priority channel 2. If priority is set, the priority icon or displayed on the left side of the channel /member alias, which indicates that the channel/member is priority channel 1 or priority channel 2. If priority is not set, priority icon is not displayed. In a scan list, there should not be multiple priority 1 or priority 2 channels. Scanning instructions and methods When the scan is started, your radio checks the current channel for voice activity by means of a circular pre programmed scan list. The LED indicator slowly flashes to orange and the scanning icon appears on the screen. During a digital and analog hybrid scan, if you are on a digital channel and you radio locks an analog channel, it will automatically switch from digital mode to analog mode during the entire duration of the call. Vice versa. There are two kinds of scanning methods Manual scanning: start scanning according to pre programming for scan open /close key or menu function, the radio will detect all channels / call groups in the presupposed scan list. Automatic scanning: when you select a channel/conversation group that has activated automatic scanning, the radio starts scanning from the channel that are activated automatically. Scanning reply The radio detects the active channel/call group when scanning, the radio stays at the channel/call group for listening (this is called the "scan hanging time" preprogramming time limit), and the LED indicator light is bright green. The scan stays on the non-priority channel, and the display icon is
. If it stays in priority channel 1 or 2, the displays icon is of
. Scanning reply process 1.Hold the radio and put it in a vertical position and maintain a distance of 1 to 2 inches (2.5 to 5 centimeters) with the mouth. If the "channel available hint" is enabled, when the transmitter is released PTTkey, you will hear a short note, which indicating that the channel is available and waits for your answer. 2.PressPTT key during the hanging time, and the LED indicator is red. 3.ReleasePTTkey to listen. 4.If you do not respond within the hanging time, the radio will continue to scan. 31 OWNERS MANUAL DIGITAL PORTABLE RADIO Menu setting The setting menu includes the following:
Radio Set Radio Info Radio Cfg Radio set You can set the following settings for your machine according to your preferences and actual needs so that it can maximize its effectiveness. Setting method: Press the [MENU] key to enter the "Settings -> Radio Set" menu, select the appropriate setting items. Talk around In case of the repeater failure or beyond the coverage of the repeater station, but both terminals are in the other's communication range, at this time, you can press theOff shortcut button to switch to the direct mode, further to achieve directly communication between two terminals. Press the pre-programmed Repeater / Off shortcut button to open the offline function; press this button again to turn off this function 1.Press theMENUbutton to enter into the MENU mode. 2.Press the/button to setting, then press theMENUbutton to select. 3.Press the/button to radio setting, then press theMENUbutton to select. 4.Press the/button to off line, then press theMENUbutton to select. 5. If the radio is in the repeater station mode, the screen indicates turn off, or if the radio is under off-line mode, the screen indicates turn off. 6. Press theMENUbutton to select. 7. The screen indicates the off-line is turn on, the icon flash, or the screen indicates off-line is turn off. 8. The screen back to the upper menu automatically. Even when the radio is turn off, the radio is kept off-line situation. Tones/Alerts Contains the following options:
Silence Keypad Tone Low power tone SMS alert tone Single call tone Group call tone Channel Notify 32 OWNERS MANUAL DIGITAL PORTABLE RADIO Silence If needed, you can enable or disable the mute of the radio (except for the emergency warning). The menu function operates as follows:
1. PressMENUto enter menu mode. 2. Press/to set, then pressMENUto select. 3. Press/to the radio setting, then pressMENUto select. 4. Press/to Tones/Alerts, then pressMENUto select. 5. Press/to Silence, then pressMENUto select. 6. PressMENUto On,the Mute function will be enabled, the screen displays Setting successful. or PressMENUto off,the Mute function will be off, the screen displays Setting successful. After Radio silence turn on, the first line of the screen will show
,all key tones and channel announcements will be turned off. Turn on or off Keypad Tone If desired, you can activate and deactivate keystrokes on the keyboard. The menu function operates as follows:
1. PressMENUto enter menu mode. 2. Press/to set, then pressMENUto select. 3. Press/to the radio setting, then pressMENUto select. 4. Press/to Tones/Alerts, then pressMENUto select. 5. Press/to Keypad Tone, then pressMENUto select. 6. PressMENUto On,then press the [MENU] key to confirm that the key Beep is enabled. The display shows Key Beep On. or PressMENUto off,then press the [MENU] key to confirm turning off the keyboard sound. The screen displays Key Beep Off Turn on/off channel Notify If needed, you can activate and deactivate the channel Notify feature. The menu function operates as follows:
1. PressMENUto enter menu mode. 2. Press/to set, then pressMENUto select. 3. Press/to the radio setting, then pressMENUto select. 4. Press/to Tones/Alerts, then pressMENUto select. 5. Press/to Channel Notify, then pressMENUto select. 6. PressMENUto On,then press the [MENU] key to confirm that the Channel Notify is enabled. The display shows Channel Notify On. or PressMENUto off,then press the [MENU] key to confirm turning off Channel Notify. The screen indicates Channel Notify Off. After the channel Notify is turned on, when the walkie-talkie is switched on or the channel is switched, the current channel number will be broadcasted. 33 OWNERS MANUAL DIGITAL PORTABLE RADIO TX Power This function can achieve quick switch of high/low power. When communication distance meets your requirements, low power can be selected to save power. When low power does not enable you to communicate with other walkie-talkies away from distance, and then please choose high power. According to the preprogrammed [Power Level Adjustment] shortcut keys, switch transmitting power of the current channel between high and low. You can set the transmitting power level of each channel to be high or low. The menu functions as follows:
1. PressMENUto enter menu mode. 2. Press/to set, then pressMENUto select. 3. Press/to the radio setting, then pressMENUto select. 4. Press/to TX power, then pressMENUto select. 5. Follow the screen prompt to change the current Settings. 6. PressMENUto select new power level. Return to the previous menu.PressBACKreturn to the home screen, and screen displays the power level icon. An H above the screen indicates the current high power; L indicates the current low power. Set backlight You can turn on or off the screen backlight of the walkie-talkie if needed. This setting will also affect the back light of the menu and numeric keyboard. According to the pre-programmed backlight automatic on-off key, switches backlight Settings. The menu functions as follows:
1. PressMENUto enter menu mode. 2. Press/to set, then pressMENUto select. 3. Press/to the radio setting, then pressMENUto select. 4. Press/to backlight, then pressMENUto select. 5. The screen indicates normally open, normally off,5S, 10S, 15S options, pressMENUto select normally open, then screen backlight is always open and light. Or if select 5S, 10S, 15S, the screen will turn off the screen backlight without any operation after the corresponding time. Backlight delay time setting The backlight delay time setting applies only to the backlight timing mode. The menu function operates as follows:
1. PressMENUto enter menu mode. 2. Press/to set, then pressMENUto select. 3. Press/to the radio setting, then pressMENUto select. 4. Press/to Backlight, then pressMENUto select. 5. The screen displays Backlight and Backlight Delay options. Press the/to select Backlight Delay and press the [MENU] key to select. 6.The screen shows Backlight Delay XX(s), press/to select more appropriate delay time (05 to 15 seconds optional), then press [MENU] to confirm backlight delay setting, indicated "backlight 5 sec/10sec/15sec" is displayed and back to the upper menu. 34 OWNERS MANUAL DIGITAL PORTABLE RADIO If the backlight is set to timed off, if you select 5S to 15S, the screen will turn off the screen backlight after the corresponding time without any user operation. Squelch You can adjust the squelch level of walkie talkie, filters unusable calls of low signal strength or channels of background noise that higher than normal value. Normally it is default value (that is regular filtering); strictly filter unwanted calls or background noise, in the same time, calls from remote locations can also be filtered out. The menu functions as follows:
1. PressMENUto enter menu mode. 2. Press/to set, then pressMENUto select. 3. Press/to the radio setting, then pressMENUto select. 4. Press/to squelch, then pressMENUto select. 5. Choose strict or normal, then pressMENUto select. PressBACKreturn to the home screen Screen If needed, you can enable and disable the boot screen display. The menu functions as follows:
1. PressMENUto enter menu mode. 2. Press/to set, then pressMENUto select. 3. Press/to the radio setting, then pressMENUto select. 4. Press/to the screen, then pressMENUto select. 5. Press/to select images or default character, then pressMENU to enable the corresponding boot screen. Keypad lock You can lock the radio keyboard to prevent accidental keystrokes. Methods include manual keyboard locking and automatic keyboard locking; among them the automatic keyboard locking includes 5S, 10S, 15S three time options. The menu functions as follows:
1. PressMENUto enter menu mode. 2. Press/to set, then pressMENUto select. 3. Press/to the radio setting, then pressMENUto select. 4. Press/to the keypad lock, then pressMENUto select. 5. Press/to on/off , then pressMENUto select. Keypad lock delay time Keypad lock delay time setting applies only to the automatic lock keyboard. The menu function operates as follows:
1. PressMENUto enter menu mode. 2. Press/to set, then pressMENUto select. 3. Press/to the radio setting, then pressMENUto select. 4. Press/to KeyPad Lock, then pressMENUto select. 5. The screen displays "key lock select" and "key lock delay time" option. Press / to select "Keypad delay time", then press [MENU] to select. 35 OWNERS MANUAL DIGITAL PORTABLE RADIO 6. The screen displays Keypad delay XX(s), press/ to select the appropriate delay time (5 to 15 seconds optional), then press [MENU] key to confirm the lock delay time Settings, the screen shows "Setting successful" and back to the upper menu. If setting lock/unlock the keypad by pressing the pre-programmed [KeyPad Lock] shortcut . If automatically lock the keypad, the keyboard will automatically lock when the user does not operate within the corresponding time. Unlock the keypad by pressing the preprogrammed keypad lock shortcut. Language This radio supports both Chinese and English language. The menu functions as follows:
1. PressMENUto enter menu mode. 2. Press/to set, then pressMENUto select. 3. Press/to the radio setting, then pressMENUto select. 4. Press/to language selection, then pressMENUto select. 5. Press/to select the corresponding language, then pressMENUto select. The screen shows the language selected and returns to the main screen. When select Chinese, if channel notify is turned on, the channel number will be notify to Chinese. When select English, if channel notify is turned on, the channel number will be notify to Engligh. Turn LED on or off If needed, you can enable and disable the LED indicator light. The menu functions as follows:
1. PressMENUto enter menu mode. 2. Press/to set, then pressMENUto select. 3. Press/to the radio setting, then pressMENUto select. 4. Press/to the LED indicator light, then pressMENUto select. 5. The screen displays open, pressMENUto enable the LED indicator light, and the screen displays it is open. Or the screen shows off and pressMENUto turn off the LED indicator light, the screen displays it is close. If the LED indicator is turned off, The transmitting and receiving indicators will be turned off Vox This function allows you to initiate voice activation for hands-free calls on programmed channels. Regardless of when the microphone on the attachment with VOX function detects the voice, the radio will automatically transmit the signal during the programmed time period. Press thePTTduring the radio operation will disable the VOX function, to re-enable the VOX function need perform one of the following operations:
Close and re-open the radio;
Change channel through /Key;
36 OWNERS MANUAL DIGITAL PORTABLE RADIO Perform the following procedure Enabling or disabling this function that is limited to radio of activating these functions. The menu functions as follows:
1. PressMENUto enter menu mode. 2. Press/to set, then pressMENUto select. 3. Press/to the radio setting, then pressMENUto select. 4. Press/to the VOX, then pressMENUto select. 5. The screen displays open, pressMENUto enable the VOX function. Or the screen shows off and pressMENUto turn off the VOX function. Gain level The higher the gain level, the higher the voice level, and the lower the sensitivity. The louder the voice volume is, the higher the voice control level is. The menu function operates as follows:
1. PressMENUto enter menu mode. 2. Press/to set, then pressMENUto select. 3. Press/to the radio setting, then pressMENUto select. 4. Press/to VOX, then pressMENUto select. 5. The screen shows "voice control switch" and "gain level" selection 6.Press /to select the appropriate gain level value, and then press [MENU] to select. The screen displaysSetup Successful. Please adjust the voice control gain level correctly according to the current environment, the user's normal speech volume, etc., so as to avoid frequent accidental triggering of voice control (high sensitivity) or difficulty in triggering voice control (low sensitivity). Clock The real-time clock is used by the terminal to display local time in real time, view time details and set time format. The clock settings are divided into:
time date Time The menu functions as follows:
1. PressMENUto enter menu mode. 2. Press/to set, then pressMENUto select. 3. Press/to the radio setting, then pressMENUto select. 4. Press/to the clock, then pressMENU. 5. Press/to the time, then pressMENUto select, which indicates the current time. 6. PressMENUto enter time setting mode. 7. Press/to move and choose the number that needs to be changed, the selected number will be displayed in reverse, then type the corresponding number to change time through numeric keypad. 8. PressMENUto save, screen display time saved. 37 OWNERS MANUAL DIGITAL PORTABLE RADIO Date The menu functions as follows:
1. PressMENUto enter menu mode. 2. Press/to set, then pressMENUto select. 3. Press/to the radio setting, then pressMENUto select. 4. Press/to the clock, then pressMENU. 5. Press/to the date, then pressMENUto select, which indicates the current date. 6. PressMENUto enter time setting mode. 7. Press/to move and choose the number that needs to be changed, the selected number will be displayed in reverse, then type the corresponding number to change date through numeric keypad. 8. PressMENUto save, screen display date saved. Match single call The menu functions as follows:
1. PressMENUto enter into the Menu mode. 2. Press/to enter into Setting, then pressMENUto select. 3. Press/to enter into Radio Setting,then pressMENUto select. 4. Press/to enter into Single call,then pressMENUto select. 5. The LCD indicateON/OFF options, press/to select ,then pressMENUto save, and select the matched type. SelectON to start the match of single call. SelectOFFto over the match of single call. After turn off the single call match function, it will not need to match all the single call ID,and can communicate directly. Match group call The menu functions as follows:
1.PressMENUto enter into the Menu mode. 2.Press/to enter into Setting, then pressMENUto select. 3.Press/to enter into Radio Setting,then pressMENUto select. 4.Press/to enter into Group call,then pressMENUto select. 5.The LCD screen indicateON/OFF options, press/to select ,then pressMENUto save, and select the matched type. SelectON to start the match of group call. SelectOFFto over the match of group call.After turn off the group call match function, it will not need to match all the group call ID,and can communicate directly. Voice Recorder(optional) 38 OWNERS MANUAL DIGITAL PORTABLE RADIO The voice recorder is optional function, it depends on the firmware version. Low version will not support the voice recorder function. This recorder function will record the whole process of communication effectively and save the communication to the terminal. This radio can record up to five hours. Voice recorder ON-OFF The menu functions as follows:
1.PressMENUto enter into the Menu mode. 2.Press/to enter into Setting, then pressMENUto select. 3.Press/to enter into Radio Setting,then pressMENUto select. 4.Press/to enter into Recording,then pressMENUto select. 5.Press/to enter into setting,then pressMENUto select. 6.Press/to enter into option of ON/OFF,then pressMENUto select. After start the voice recorder function, the radio will record for every call, and save into the record menu. If necessary, can ask dealer to pre-programmed theRecording switchkey to turn on or turn off the function. Voice recorder selection The voice recorder for this radio can be selectn to receive record,or transmit record,or receive and transmit record. The menu functions as follows:
1.PressMENUto enter into the Menu mode. 2.Press/to enter into Setting, then pressMENUto select. 3.Press/to enter into Radio Setting,then pressMENUto select. 4.Press/to enter into Recording,then pressMENUto select. 5.Press/to enter into setting,then pressMENUto select. 6.Press/to enter into the record selection,then pressMENUto select. 7.The LCD screen will indicate choice of Receive recordTransmit recordReceive/transmit record, press/to select, and then pressMENUto confirm. If selectReceive record,only record the incoming call during the communication;
If selectTransmit record,only record the outgoing call during the communication;
If selectReceive/transmit record,record both incoming call and outgoing call during the communication. Voice recording list check and playback Voice recording list management including record playback, record deletion,record properties view. The menu functions as follows:
1.PressMENUto enter into the Menu mode. 2.Press/to enter into Setting, then pressMENUto select. 3.Press/to enter into Radio Setting,then pressMENUto select. 4.Press/to enter into Recording,then pressMENUto select. 5.Press/to enter into list,then pressMENUto select. 6.The LCD screen will indicate the catalog of recorders, press/to select the record file,and then pressMENUto select. 39 OWNERS MANUAL DIGITAL PORTABLE RADIO If selectPlay,the LCD screen will indicate the record play and playback the selectn record;
If selectDelete,the record will be deleted;
If selectDetail,you can check the ID,call in/call out,date, time,record duration etc. Voice recorder deletion The menu functions as follows:
1.PressMENUto enter into the Menu mode. 2.Press/to enter into Setting, then pressMENUto select. 3.Press/to enter into Radio Setting,then pressMENUto select. 4.Press/to enter into Recording,then pressMENUto select. 5.Press/to enter into Delete all,then pressMENUto select. 6.The LCD screen will indicate Confirm to delete??,then press/to select the record file,and will delete all the record files. Radio information search Search the radio information, including: radio number(the name of the owner and serial number for the radio)and the radio version(firmware version, CPS version)etc. PressBACKto return to the previous screen at anytime. ID Check the Radio ID The menu functions as follows:
1.PressMENUto enter into the Menu mode. 2.Press/to enter into Setting, then pressMENUto select. 3.Press/to enter into Radio information,then pressMENUto select. 4.Press/to enter into Radio number,then pressMENUto select. 5.The LCD screen will indicate the owners name and radio ID. Check the Radio version Check and indicate the radio is firmware version and CPS version information. The menu functions as follows:
1.PressMENUto enter into the Menu mode. 2.Press/to enter into Setting, then pressMENUto select. 3.Press/to enter into Radio information,then pressMENUto select. 4.Press/to enter into Radio version,then pressMENUto select. 5.The LCD screen will indicate the current firmware version and CPS version. Radio configuration The radio configuration is mainly to edit the channel content. 40 OWNERS MANUAL DIGITAL PORTABLE RADIO Configure paths: enter the Settings -> radio configuration menu, and select the corresponding configuration items to configure. Receiving frequency The menu functions as follows:
1.PressMENUto enter into the Menu mode. 2.Press/to enter into Setting, then pressMENUto select. 3.Press/to enter into Radio setting,then pressMENUto select. 4.Press/to enter into receiving frequency ,then pressMENUto select. 5.The LCD screen will indicate the receiving frequency of current channel, then pressMENUto select. 6.Press BACKto delete the previous number bit by bit,and input the corresponding receive frquency by pressing the number keys. 7. After the change is completed, press the MENU key and the LCD screen indicate the setting is successful. Transmitting frequency The menu functions as follows:
1.PressMENUto enter into the Menu mode. 2.Press/to enter into Setting, then pressMENUto select. 3.Press/to enter into Radio setting,then pressMENUto select. 4.Press/to enter into transmitting frequency,then pressMENUto select. 5.The LCD screen will indicate the transmitting frequency of current channel, then pressMENUto select. 6.Press BACKto delete the previous number bit by bit,and input the corresponding transmitting frquency by pressing the number keys. 7.After the change is completed, press the MENU key and the LCD screen indicate the setting is successful. Transmit time-out timer The setting of the time-out timer function prevents the user from occupying the channel for a long time. If the continuous transmitting time exceeds the time set by the distributor, the radio will stop transmit and make the warning sound. If want to stop the warning sound, please loosePTT. If you need to transmit again, please press the PTT button again after a period of time (specifically set by the dealer). The menu functions as follows:
1.PressMENUto enter into the Menu mode. 2.Press/to enter into Setting, then pressMENUto select. 3.Press/to enter into Radio setting,then pressMENUto select. 4.Press/to enter into transmit time-out timer,then pressMENUto select. 5.The LCD screen indicatesTOT:XXX,press/ to the corresponding option(additive increase in the range of 5S), then press MENUto select. In the emergency alarm mode, this function is invalid. 41 OWNERS MANUAL DIGITAL PORTABLE RADIO Transmitting contacts Transmitting contactor only can be modified under the digital channels. The menu functions as follows:
1.PressMENUto enter into the Menu mode. 2.Press/to enter into Setting, then pressMENUto select. 3.Press/to enter into Radio setting,then pressMENUto select. 4.Press/to enter into transmitting contacts,then pressMENUto select. 5.Press/to select the transmitting contacts in the list, then pressMENUto select. The LCD screen will indicateSet successfully and return to the previous menu. Color code Color code refers to a system. The same color code is necessary for the terminals communicating with each other. The frequency is the integer within 0~15. The color code only can be set in the digital model. The menu functions as follows:
1.PressMENUto enter into the Menu mode. 2.Press/to enter into Setting, then pressMENUto select. 3.Press/to enter into Radio setting,then pressMENUto select. 4.Press/to enter into color code,then pressMENUto select. 5.Press/to selcet the the color code, then pressMENUto select. The LCD screen will indicateSet successfully and return to the previous menu. Time slot The time slot is a time slot for selecting a voice call and data transmission, and the set time slot value is time slot 1 or time slot 2. Can only be set under the digital channel. The menu functions as follows:
1.PressMENUto enter into the Menu mode. 2.Press/to enter into Setting, then pressMENUto select. 3.Press/to enter into Radio setting,then pressMENUto select. 4.Press/to enter into time slot,then pressMENUto select. 5.Press/to selcet the time slot,then pressMENUto select. The LCD screen will indicatebs time slot has been set and return to the previous menu. Unse the dual-capacity direct mode, the host digital channel can be configured to be on or off. This mode supports parallel direct mode transmission of two walkie-talkies, and the two transmissions are within the channel bandwidth of 12.5 kHz. The radioes in the same distribution group must use the same time slot, and the group using time slot 1 will not interfere with the group using time slot 2. CTCSS CTCSS can be set only under the analog channel, including:
CTCSS encode CTCSS decode 42 OWNERS MANUAL DIGITAL PORTABLE RADIO Trasmitting CTCSS/DCS The menu functions as follows:
1.PressMENUto enter into the Menu mode. 2.Press/to enter into Setting, then pressMENUto select. 3.Press/to enter into Radio setting,then pressMENUto select. 4.Press/to enter into CTCSS,then pressMENUto select. 5.Press/to enter into transmitting CTCSS,then pressMENUto select. 6.The LCD screen indicates options of None/CTCSS/DCS_N/DCS_I, press/enter into None, and pressMENUto select,then will be no CTCSS trasmitting, the LCD indicates setting successfully;
Or press/enter into CTCSS , and pressMENUto select CTCSS,press /to select the corresponding data, and pressMENUto confirm the setting,the LCD indicates setting successfully;
Or press/enter into DCS_N , and pressMENUto select positive DCS,press /to select the corresponding data, and pressMENUto confirm the setting,the LCD indicates setting successfully;
Or press/enter into DCS_I , and pressMENUto select reverse DCS,press /to select the corresponding data, and pressMENUto confirm the setting,the LCD indicates setting successfully. Receiving CTCSS/DCS The menu functions as follows:
1.PressMENUto enter into the Menu mode. 2.Press/to enter into Setting, then pressMENUto select. 3.Press/to enter into Radio setting,then pressMENUto select. 4.Press/to enter into CTCSS,then pressMENUto select. 5.Press/to enter into receiving CTCSS,then pressMENUto select. 6.The LCD screen indicates options of None/CTCSS/DCS_N/DCS_I, press/enter into None, and pressMENUto select,then will be no CTCSS receiving, the LCD indicates setting successfully;
Or press/enter into CTCSS , and pressMENUto select CTCSS,press /to select the corresponding data, and pressMENUto confirm the setting,the LCD indicates setting successfully;
Or press/enter into DCS_N , and pressMENUto select positive DCS,press /to select the corresponding data, and pressMENUto confirm the setting,the LCD indicates setting successfully;
Or press/enter into DCS_I , and pressMENUto select reverse DCS,press /to select the corresponding data, and pressMENUto confirm the setting,the LCD indicates setting successfully. Main technological specification Frequency range VHF136-174MHz /UHF:400-470MHz (Dual Band) Memory Channel 1024 Frequency Stability 1.0ppm 43 OWNERS MANUAL DIGITAL PORTABLE RADIO Operating Temperature
-30+60 Operating Voltage DC7.4 DemissionHWD 1336236mm Weight Transmission Output power Output Consumption Consumption FM modulation 4FSK digital modulation Modulation Distortion Signal-to-noise Adjacent Channel power Audio Response Antenna Port Spurious Digital Protocol Vocoder type Reception Analog receive sensitivity Digital receive sensitivity Audio power Audio distortion Audio response Signal imitation Intermediation Adjacent channel selectivity Receive Current FM noise High:5W Low:1W Analog1.6A Digital0.9A 0.18A 11KF3E@12.5KHz 12.5KHz for data:7K60FXD 12.5KHz for data and voice :7K60FXE
<5%
40dB@12.5KHz
-65dB -60dB
+1-3dB 9KHz-1GHz: -36dBm 1GHz-12.75GHz: -30dBm ETSI-TS102 361-1,-2,-3 AMBE+2 TM
-122dBm (12dB SINAD)
-120dBm(BER5%) 1W
<10%
+1-3dB 70dB 58dB 60dB 380mA 40dB @12.5KHz All specifications may be modified without prior notice or liability. 44 OWNERS MANUAL DIGITAL PORTABLE RADIO Troubleshooting Problem Reason Solution The battery doesnt be installed Remove and re-install the battery. correctly. The radio doesnt start. The battery runs out. Charging or change a new battery. The battery is poor contact causing by Clearing the contact. Please get contact with our damaged or dirty. distributor to repair, if you cannot solve it. Battery voltage is low. Charging or change a new battery. The sound is small/
The voice is too small. Turn up the sound. intermittent, or on sound The antenna is loose. Turn off the radio and re-install the antenna. when receiving the signal. The speaker is damaged or dirty. Clear the speaker. Please get contact with our The frequency is different with other Resetting the same frequency with them. distributor to repair, if you cannot solve it. Cannot talk with the members in the same group members. In the different digital or analog Correct to the same channel. channels Single call or group call does not work in the digital channel Too far away from each other Get close with each other Be different in the Setting the same frequency/channel/color code/
frequency/channel/color code/ time time slot slot Other sound in the channel, Interference from the same frequency Change to new frequency, or correct the squelch which is not from the The signal is not set yet. Set the signal for all radio in the group members Be too away from other members. Get close with other members. Poor location, such as blocked by tall Move to open environment, restart the radio. The loud noise buildings, or located in the basement Interfere by the environment or Avoid the device interfering the radio electromagnetic As above method still cannot solve your problem, or you meet other problem, please get contact with local distributor to get the technological support. Maintenance and clean To keep the performance and extend the service life, please note the content below for maintain the clear the radio. Maintenance Do not store the radio in an environment containing a corrosive electronic circuit material. Do not directly lift an antenna or an external microphone in the course of carrying or using a radio. Cover the appendage interface cover, when attachments are not used. Clean 45 OWNERS MANUAL DIGITAL PORTABLE RADIO Please use clean, dry cloth or brush to wipe off the surface of the walkie talkie and the dust attached to the charging pole on a regular basis. Wipe the radio on dirt with dust, lint free cloth, to prevent poor contact. After long term use of radio, walkie talkie buttons, control knobs and chassis are easy to dirty. You can use neutral detergent (do not use strong corrosive chemicals) and wet cloth to clean. After cleaning, make sure the radio is completely dry; otherwise please do not use it. When the walkie talkie does not in use, please attach the cover on the socket. Please turn off the radio and remove the battery before clearing. 46 OWNERS MANUAL DIGITAL PORTABLE RADIO Disclaimer The accuracy and completeness of the contents are sought in the process of compilation, but we do not bear any responsibility for the possible errors or omissions. With the continuous development of technology, we reserve the right to change the design and specification of the product without notice. No copy, modification, translation and dissemination of this handbook may be made in any form without the prior written authorization of our department. The third party products and contents involved in this manual belong to the third party. Our company does not guarantee its accuracy, effectiveness, timeliness, legality or integrity. If you need more information or have any suggestions for this manual, welcome to our website: http://www.volthink.com, or call our service hotline 400-0123-353. Our PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY radio generators RF electromagnetic energy during transmit mode.This radio is designed for and classified asOccupational Use Only,meaning it must be used only during the course of employment by individuals aware of the hazards,and the ways To Minimize Such hazards. This radio is NOT intended for use by theGeneral Population in an uncontrolled environment. This radio has been tested and complies with the FCC RF exposure limits forOccupational Use Only. Inaddition, our PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY radio complies with the following Standards and Guidelines with regard to RF energy and electromagnetic energy levels and evaluation of such levels for exposure to humans:
---IEEE Std. 1528:2013 and KDB447498, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields.
---American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
---American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields-RF and Microwave. The information listed above provides the user with the information needed to make him or her aware of RF exposure, and what to do to as-sure that this radio operates with the FCC RF exposure limits of this radio. Electromagnetic Interference/Compatibility During transmissions, PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites. Occupational/Controlled Use The radio transmitter is used in situations in which persons are exposed as consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. 47 OWNERS MANUAL DIGITAL PORTABLE RADIO Attention:
This radio complieswith IEEE and ICNIRP exposure limits for occupational/controlled RF exposure emvironment at operating duty factors of up to 50% and is authorized by the FCC for occupational use only. An appropriate warning lable is affixed to all units. In order to comply with RF exposure requirements, a minimum distance of 2.5cm must be maintained when held-to-face, and body-worn operations are restricted to the approved original acessories (belt clip)a minimum distance of 0 cm. Do not use this device when antenna shows obvious damages. This product is compliance to FCC RF Exposure requirements and refers to FCC website https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm search for FCC ID: 2AJGMDM-1706 to gain further information include SAR Values. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 48
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-04-18 | 406.1 ~ 470 | TNF - Licensed Non-Broadcast Transmitter Held to Face | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2019-04-18
|
||||
1 | Applicant's complete, legal business name |
PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY
|
||||
1 | FCC Registration Number (FRN) |
0025809377
|
||||
1 | Physical Address |
3/F FULOK BLDG 131-133 WING LOK ST
|
||||
1 |
SHEUNG WAN, N/A
|
|||||
1 |
Hong Kong
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
K******@phoenix-testlab.de
|
||||
1 | TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AJGM
|
||||
1 | Equipment Product Code |
DM1706
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
P******** W****
|
||||
1 | Telephone Number |
00852********
|
||||
1 | Fax Number |
00852********
|
||||
1 |
w******@baofengradio.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | TNF - Licensed Non-Broadcast Transmitter Held to Face | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | DMR Digital Radio | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power output listed is rated conducted. Device can be operated with 5W and 1W conducted output power alternatively. This device must be restricted to work-related operations only in an Occupational/Controlled RF exposure environment and must operate with a duty factor not exceeding 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled Exposure limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Body-worn SAR compliance is limited to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum of 2.5cm between the device, including its antenna, and the user's body. The highest reported SAR values for Face held and Body-worn accessory are for VHF: 0.32 W/Kg and 0.64 W/Kg for UHF: 2.34 W/kg and 3.22 W/kg respectively when operating at 50% duty cycle. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Attestation of Global Compliance (Shenzhen) Co., L
|
||||
1 | Name |
D******** L******
|
||||
1 | Telephone Number |
+86-7********
|
||||
1 |
d******@agc-cert.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 22,9 | EF | 136 | 174 | 5 | 1.1 ppm | 11K0F3E | |||||||||||||||||||||||||||||||||
1 | 2 | 22,9 | EF ES | 136 | 174 | 5 | 1.1 ppm | 7K60FXD | |||||||||||||||||||||||||||||||||
1 | 3 | 22,9 | EF ES | 136 | 174 | 5 | 1.1 ppm | 7K60FXW | |||||||||||||||||||||||||||||||||
1 | 4 | 22,9 | EF | 406.1 | 470 | 5 | 1.1 ppm | 11K0F3E | |||||||||||||||||||||||||||||||||
1 | 5 | 22,9 | EF ES | 406.1 | 470 | 5 | 1.1 ppm | 7K60FXD | |||||||||||||||||||||||||||||||||
1 | 6 | 22,9 | EF ES | 406.1 | 470 | 5 | 1.1 ppm | 7K60FXW |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC