BF-T12 To users Thank you for your favor with our products. We are dedicated to providing high performance and high stability radio communication products. This two-way radio is no exception. This product is a small and exquisite walkie-talkie developed and produced by the professional team for the popularization of civil consumer market. In order to make you fully understand the various advantages of the radio performance and use and maintenance methods, please read this manual carefully. Function Introduction 13.7V Rechargeable Lithium Battery 2Frequency RangeFRS 3Narrow Band Selection: 12.5KHz 4Stepped Frequency:5K/6.25K/12.5K/25K 5Output power1.5W/05W 650 Groups CTCSS105 Groups DCS 7Up to 99 Channels(1-99) 8Time-out timer(TOT) 9VOX Level: OFF/1/2/3/4/5 10Busy Channel Lockout (BCLO) 11Squelch Level:0-9 12Battery Saving Function 13Monitor Function 14Low Battery Voltage Warning/Indication 15Chinese/English Language Safety Information Please read the following information in order to use this two-way radio safely and efficiently. 1. The maintenance work of the two-way radio can only be carried out by professional technical personnel; assembly/dis assembly without permission is prohibited;
2. To avoid problems caused by electromagnetic interference and/or electromagnetic compatibility, please turn off the two-way radio in places with the sign Please turn off two-way radio, such as hospitals and other health care facilities. 3. When taking airplane, please turn off the two-way radio when the crew request. 4. In automobile with airbags, do not place the two-way radio in the inflation area of the airbags. 5. Turn off the two-way radio before entering the flammable and explosive environment;
6. Do not replace or charge the battery in flammable and explosive environments;
7. Turn off the two-way radio before approaching the blasting area and detonator area;
8. Do not use the two-way radio if the antenna is damaged, or else it may cause minor skin burns;
9. Do not expose the two-way radio to direct sunlight or near the heating device. 10. While the portable two-way radio is transmitting, keep the radio in a vertical position and keep the microphone about 5cm from the mouth. 11. Keep the two-way radio at least 2.5cm from the head or body during transmitting. 12. If you are wearing the portable two-way radio on your body, make sure that the antenna is at least 2.5cm away from the body when the two-way radio is transmitting. 13. If the two-way radio has any odor or smoke, turn off the power immediately and contact your dealer. Get start PTT PTT Button 1 Side Key 1 2 Side Key 2 LED Lamp
/ Power and Volume Knob LED Screens Status Indicator
/ DOWN/ Quickly Backward
/ UP/ Quickly Forward Microphone
/Mac Earphone/Mac Socket 1. Description of the Buttons
[PTT]When transmitting, press this button and speak to the microphone; release the button to receive.
[ < ] DOWN Button: Press this key for decrement of channel; long press this key for fast decrement of channel.
[ > ] UP Button: Press this key for increment of channel; long press this key for fast increment of channel. Note:
."<" and ">" are presses for more than 2 seconds to enter channel scanning. Press and hold the PTT+ "<" button and turn on radio. Switch between Chinese and English. Press and hold PTT+ ">" button to transmit DTMF(1750HZ, 1450HZ, 2100HZ) by default to 1750HZIt can be set by the write frequency software (edit optional function DTMF). Side Key 1Press the key to turn on or off the SOS function, long press this key for monitor function. Side Key 2: Press the key to turn on flashlight; long press this key for keypad lock. 2. LED icon and function description 1.CTCTCSSWhen the screen displays this symbol, it represents the current channel for CTCSS receive and transmit. 2.DCSCDCSSWhen the screen displays this symbol, it represents the current channel for CDCSS receive and transmit. 3.VOX When the screen displays this symbol, it represents the VOX function of the turn on. 4. (Key lock)When the screen displays this symbol, it represents the keyboard is locked and cannot be switched up and down; except for PTT key and MONI key. 5.TX: When the screen displays this symbol, it represents is in the transmitting state, and the signal strength icon is display same time. 6.RX: When the screen displays this symbol, it represents is in the receiving state, and the signal strength icon is display same time. 7. Signal strength icon. 8. Battery level and Charging indicatorThe icon represents the current battery level. When charging, the battery level jumps back and forth from 1 grid to 3 grids.
(No display when power off and charging) 9. Channel number: Display current channel. Note: The radio will enter power-saving mode after 10 seconds of standby, then the screen will be turned off, this moment, the green is flicker. Function Operation 1. CTCSS/CDCSS CTCSS/CDCSS encode and decode 50 groups of CTCSS and 105 groups of CDCSS encode and decode functions can be set to prevent unrelated calls received on the same channel. 2. VOX VOX Turn On and Off with PC programming software. 3. Busy Channel Lockout(BCLO) To activate this function, when the channel is being used by other users, press
"PTT" key, the radio will cannot transmit and "beep, beep" prompt sound. When the channel is idle, press the "PTT" key again and it can be transmitted. 4. Time-out timer(TOT) The function of the time-out timer is to prevent the any calling party from using a channel too long and continuously. You can set this function through the programmable by PC (time:30 seconds, 60 seconds, 90 seconds, 120 seconds, 150 seconds, 180 seconds, 210 seconds, 240 seconds, 270 seconds, 300 seconds). If you continue to transmit beyond the set time, the radio will stop transmitting and beep. Release the [PTT] button and press the [PTT] button again to resume transmit. 5. Monitor Turn on the radio, press the MONI button for a long time to compulsively open the receiver and listen to whether there is any voice on the current channel. 6. SQL Squelch Level The frequency of squelch is 0 (on) -9 (deep), steps: 1, Level 0 is normally open SQL. 7. Automatic Battery Saving Function This function starts when the machine does not receive a signal or does not perform an operation for more than 10 seconds. The machine automatically stops this function when it receives a signal or performs an operation. 8. Chinese/English voice prompts Switch Chinese and English with PC programming software 9. Low Battery Voltage Warning When the battery voltage is 3.3v, the radio voice prompts: "charge battery". When the battery voltage is 3.1v, the radio is forbidden to transmit. 11 Scan In standby mode, Press and hold the UP and DOWN keys for 2s to start scanning, and press any key to stop scanning. 12 DTMF Transmit DTMF Press and hold the PTT+ > key to transmit the corresponding DTMF number.
(1750HZ1450HZ2100HZ) 13 SOS) Press the side key 2 to open and close the SOS, there are "field alarm" and "send alarm", which need to be set by write frequency software. Technical Specification General Frequency range:FRS Memory channels: 99 Operation voltage: DC3.7Vli-ion Battery Frequency stability:2.5ppm Operation temperature: -20~+50 Mode of operation: Simplex Antenna impedance:50 Ground connection: Negative electrode Volume: 58x28.5x172MM Transmitter RF Power: 1.5W/0.5W Modulation: FM Max frequency deviation:5KHz Stray Radiation:-60dB Transmit current:1000mA Pre-emphasis Character: 6dB/per octave Receiver Sensitivity: <0.16uv (12dB SINAD) Squelch Sensitivity :< 0.2uv Audio power:380mW Audio distortion: <10%
Intermodulation: 65dB Receive current: 380mA NoteThe above specifications/technical instructions are for reference only because of the continuous improvement of the technology. Please refer to the physical object. FRS Frequency List:
No. Frequency List No. Frequency List 1 2 3 4 5 6 7 8 9 10 11 462.5625 462.5875 462.6125 462.6375 462.6625 462.6875 462.7125 467.5625 467.5875 467.6125 467.6375 12 13 14 15 16 17 18 19 20 21 22 467.6625 467.6875 467.7125 462.5500 462.5750 462.6000 462.6250 462.6500 462.6750 462.7000 462.7250 FCC Warning Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure Information:
This product is compliance to FCC RF Exposure requirements and refers to FCC website https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm search for FCC ID: 2AJGM-BF-T12 to gain further information include SAR Values. The device only supports simplex-mode and transmitting is no more than the rated duty cycle factor of 50% of the time. For hand-held operation, the radio should be held at least 25mm from the user's face. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with RF exposure requirements, and should be avoided.