FCC ID: 2A24W-WAP-1 Wireless Access Point

298mm m m 9 0 2

():Mojo

():128g

():CMYK

():NO

():298x209mm

():+-1mm 149mm m m 5

. 4 0 1 WI-RDC-016 Dereck 2021-08-18 for WPX8988v1-PW QSG 5150000558M7 A3

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. This device is restricted to indoor use. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 30cm between the radiator & your body. 5 4 0 1 400g P WI-RDC-016 FCC 515*

A0 Luby 2021-11-19

2.85 36, 50+0. 20 69. 900.20 BIPofvvit Product type: Wireless Access Point Model number: WAP-1 FCC ID: 2A24W-WAP-1 FC CONTAINS FCC ID:PPQ-WM6321 MAC: DOB214XXXXXX = SN: LCWAPXXXXXXXX

Date: December 21, 2021 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request to change in Identification To Whom It May Concern:

This application for Change of Identification request a new FCC ID as stipulated in 47CFR 2.933(b) for presently authorized equipment. This application by PoEWit Technologies Inc will establish a new FCC ID under FCC ID:

2A24W-WAP-1 for the purpose of marketing. The original grant to LITE-ON TECHNOLOGY CORP. FCC ID: PPQ-WPX8988 will remain in effect. Per 2.933(b) Sincerely, Applicant Address

(1) The original identification is FCC ID: PPQ-WPX8988

(2) The original grant date is 12/16/2021

(3) The equipment is electrically and functionally identical. This application only applies for model WAP-1 (brand: PoEWit) and uses different FCC ID number.

(4) The original test results are applicable and representative of this changed device

: PoEWit Technologies Inc

: 2307 Sea Island Dr Fort Lauderdale FL 33301 United States

Confidentiality Request Letter Date: December 21, 2021 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for confidentiality FCC ID: 2A24W-WAP-1 To whom it may concern:

Short-term Confidentiality Pursuant to Public Notice DA 04-1705 and the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), and in order to comply with the marketing regulations in 47 C.F.R. 2.803 and the importation rules in 47 C.F.R. 2.1204 while ensuring that business-sensitive information remains confidential until the actual marketing of newly authorized devices, we are request the Commission grant temporary confidential treatment and not release the following attachments for routine public disclosure until 180 days after the grant date. 1. External Photographs 2. Users manual It is our understanding that test measurement reports and correspondence during the certification review process cannot be granted confidential treatment, and such information will be available for public review once the grant of equipment authorization is issued. Sincerely, Applicant Address

: PoEWit Technologies Inc

: 2307 Sea Island Dr Fort Lauderdale FL 33301 United States

Letter of Authorization Date: December 21, 2021 Subject: Product Certification Representative Authorization Letter Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 FCC ID: 2A24W-WAP-1 Product Name: Wireless Access Point To whom it may concern:

Sporton International Inc. Name

: Leo Huang Job Title : Manager e-mail

: Leohuang@sporton.com.tw We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization to the FCC Rules and Regulations. Address : No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333, Taiwan (R.O.C.) We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Applicant Address

: PoEWit Technologies Inc

: 2307 Sea Island Dr Fort Lauderdale FL 33301 United States

Date: December 21, 2021 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request of Identification Authorization To Whom It May Concern:

This letter grants authorization for representatives of PoEWit Technologies Inc to apply the FCC for a change in identification as stipulated under 47CFR2.933 of the FCC rules. This authorization applies to LITE-ON TECHNOLOGY CORP., FCC ID: PPQ-WPX8988 (Original grant date: 12/16/2021). The equipment is electrically identical. The only change being the label on the device. The original test results, technical information and relevant document continue to be representative of the applicable to the change equipment. We are aware that PoEWit Technologies Inc intends to market the above referenced product under FCC ID: 2A24W-WAP-1 Sincerely, Applicant Address

: LITE-ON TECHNOLOGY CORP.

: Bldg. C, 90, Chien 1 Rd., Chung-Ho, New Taipei City, 23585 Taiwan