FCC ID: 2A62O-1701 Remote Controller

USER'S MANUAL Model Number: RC3A1 HOW TO USE THE REMOTE CONTROLLER:

The remote control is for the wired controller only:

(1) REMOVE THE BATTERY LID AT THE BACK OF REMOTE CONTROL, INSTALL THE TWO AAA/UM4/LR03 BATTERIES( NOTINCLUDED) PROPERLY AS INDICATED ON THE BATTERY COMPARTMENT. MAKE SURE TO MATCH THE (+) AND (-) ENDS OF THE BATTERIES.

(2) PRESS THE BUTTON TO SELECT DIFFERENT FUNCTIONS, REFER TO HOW TO USE THE DUAL COLOR LIGHT CONTROLLER. TWO AAA/UM4/LR03 BATTERIES. HAZARDOUS WASTE.

(3) TO REPLACE THE BATTERY, OPEN THE BATTERY COMPARTMENT WITH A COIN. REPLACE WITH

(4) DISPOSE USED BATTERY PROPERLY. OBSERVE LOCAL REGULATIONS REGARDING DISPOSAL OF

(5) ENSURE THE BATTERIES ARE INSTALLED CORRECTLY WITH REGARD TO POLARITY (+ AND -). BATTERY REPLACEMENT IMPORTANT SAFETY INSTRUCTIONS WARNING: SMALL PARTS, KEEP AWAY FROM CHILDREN. Do not expose light set to moisture. Do not mix old and new batteries. Do not mix alkaline, standard (Carbon - Zinc), lithium, or rechargeable (NiCd, NiMH or other type) batteries. Remove batteries when not used for an extended period of time, or when depleted. Dispose of used batteries properly. Use only AAA-size (UM4/LR03) batteries for the remote controller. Clean the battery contacts prior to battery installation. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK. FCC Caution:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is Consult the dealer or an experienced radio/TV technician for help. connected. ISEDC Warning This device complies with Innovation, Science, and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d' Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil nedoit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. Le prsent appareil est conforme Aprs examen de ce matriel aux conformit ou aux limites dintensit de champ RF, les utilisateurs peuvent sur lexposition aux radiofrquences et la conformit and compliance dacqurir les informations correspondantes.

Shenzhen Accurate Technology Co., Ltd. Project No.: SZNS220622-27886E-RF FCC ID Label FCC ID Label Location Information (Back side) The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925) LABEL AND LOCATION Page 1 of 1

Company Name: Polygroup Evergreen Limited Add: Unit 606, 6th Floor, Fairmont House, No.8 Cotton Tree Drive, Central, Hong Kong Tel: 86-769-83915520-2802 Email: michael.wang@polygroup.com FCC Confidential Authorization Date: 2022-07-11 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2A62O-1701 In accordance with Sections 0.457 and 0.459 of the Commissions Rules, Polygroup Evergreen Limited. hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature:

Mr Michael Wang Tittle Manager

Company Name: Polygroup Evergreen Limited Add: Unit 606, 6th Floor, Fairmont House, No.8 Cotton Tree Drive, Central, Hong Kong Tel: 86-769-83915520-2802 Email: michael.wang@polygroup.com FCC Authorization Date: 2022-07-11 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We Polygroup Evergreen Limited, he undersigned, hereby authorizes Shenzhen Accurate Technology Co., Ltd. to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Shenzhen Accurate Technology Co., Ltd. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, This authorization is valid until further written notice from the applicant. 21 U.S.C. 862. Sincerely Yours, Signature:

Mr Michael Wang Tittle Manager QA-FR-170-B 7/29/2014

Company Name: Polygroup Evergreen Limited Add: Unit 606, 6th Floor, Fairmont House, No.8 Cotton Tree Drive, Central, Hong Kong Tel: 86-769-83915520-2802 Email: michael.wang@polygroup.com Date: 2022/7/11 Declaration of Alteration To Whom It May Concern, We, Polygroup Evergreen Limited hereby declare that there are some differences between our Multiple Models and testing products. Details as below:

Notes: Testing products-the products tested by Shenzhen Accurate Technology Co., Ltd. Products Description Name Remote controller Manufacturer Polygroup Evergreen Limited Differences Description Tested Model Multiple Models Differences Details RC3A1 FCC ID2A62O-1701 RC2A1 RC3A2 Model numbers. PCB board, structure and internal of these models are the same, only difference from model numbers. Besides the differences in the table above, we declare the products are identical We guarantee all the information provided above is true, and notice that well bear all the consequences caused by any false information or concealing Best Regards, Signature:

Print Name: Mr Michael Wang Title: Manager