FCC ID: 2A62O-PDT015TS Remote Controller

TM NEED HELP? DO NOT RETURN TO STORE. CALL: 1-855-HDHoliday (1-855-434-6543) Monday - Friday 8am to 7pm EST, Saturday 9am to 6pm EST NOTE: DEMO MODE ACTIVATED Please reference Demo Mode Instructions for more details. Safety Information IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed, including the following:

a. READ AND FOLLOW ALL SAFETY INSTRUCTIONS. b. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation. c. This seasonal product is not intended for permanent installation or use. d. Do not mount or place the product near gas or electric heaters, fireplaces, candles, or other similar sources of heat. e. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails. f. Do not let lamps rest on the supply cord or on any wire. g. Unplug the product when leaving the house, when retiring for the night, or if left unattended. h. This is an electric product and not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it. i. Do not use this product for other than its intended use. Christmas Tree Model: 23PG90078 Sku # 1005 271 537 Pre-Assembly Package Contents Part Description Quantity A Tree top 1 B Tree center, Sticker 2 1 C Tree bottom, Sticker 1 1 D Tree stand 1 E Remote Control 1 Assembly Assembling the tree stand Step 1. Pull apart the legs of the stand so that they are snapped into an x-shape, place the tree stand on a level surface. To close the stand, press the metal button and fold the legs together. Click Assembling the tree This tree assmbles with Quick Set feature

---Set up and light up your tree in less than 10 minutes!

Step 1. Remove the protective caps from the tree bottom and insert the pole into the tree stand. Note: Do not step on the tree stand legs during the setup. This may deform the tree stand and may result in an unbalanced tree. j. Do not hang ornaments or other objects from cord, wire, or light Step 2. Continue by inserting the upper tree section(s) to the string. lower section(s) until inserting the tree top. k. Do not close doors or windows on the product or extensions cords as this may damage the wire insulation. l. Do not cover the product with cloth, paper, or any material that Step 3. Shape the branches to your preference by working from the bottom to the top. When adjusting branches, ensure that all wires are free of branch hinges. is not a part of the product when in use. Step 4. Insert the adapter into the wall outlet. All your lights m. This product is equipped with push-in type lamps. Do not twist should now be lit. lamps. n. Read and follow all instructions that are on the product or provide with the product. o. SAVE THESE INSTRUCTIONS Step 5. Shape the tree from the bottom to the top. Start with the branches farthest from the pole fan out in a star shape, and continue until the entire tree is shaped. Top view Side view Step 6. When finished shaping the branches, slightly upsweep all branch tips for a uniform look. TM Tree top 100S 80S 90S 50S Section 2 90S Section 1 80S 80S 80S Do Not Tamper Internal Parts Open the cap cover Align both arrows in a straight line before sliding down to insert Adapter To Be Plugged Into Wall Outlet Control box Foot Pedal on/off Switch LAMP REPLACEMENT Step 1. Grasp the power adapter or power cord plug, and than unplug from the power outlet. Do not pull the power cord. Step 2. Lift up lamp lock tab, then pull the lamp and plastic lamp base straight out of the lamp-holder. Step 3. Replace with a new spare lamp provided with this product.

(Reference figure only) Operation Turning on the tree NOTE: If some bulbs do not light or flicker, search for any loose plugs and/or broken, loose, or missing bulbs. Replace bulbs promptly with the replacement bulbs provided in order to maintain the performance and life expectancy of your tree. Shape the branches to your preference by working from the bottom to the top. When adjusting branches, ensure Step 1. Connect the light strings of the tree together and plug the adapter into a wall outlet. Step 2. If the tree comes with a foot pedal, step on the On/Off button. Maintenance Spare parts This tree package includes hinge pins, washers and bulbs for any replacement or repair that you need to perform on your tree. If extra parts are needed, contact the Customer Service Team at 1-855-HDHoliday (1-855-434-6543) from 8am to 7pm EST, Monday through Friday, and 9am to 6pm EST, Saturday. Repairing Loose Hinges Step 1. Place the branch into the slot of the bracket Step 2. Insert a new hinge pin through the holes of the bracket and secure with a washer. Christmas Tree Model: 23PG90078 Sku # 1005 271 537 Use and Care Instructions 1. Before using or reusing, inspect product carefully. Discard any products that have cut, damaged or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire. 2. Before disassembling the tree, unplug the tree and remove all ornaments and decorations. 3. Gently lift the tree top straight up to remove from the center section and fold all branches towards the pole. 4. Repeat this step for the center and bottom tree sections. 5. When storing the product, carefully remove the product from wherever it is placed, including tree, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires. Cover the protective cap on the poles to avoid damaging the internal parts. 6. When not in use, store neatly in a cool, dry location protected from sunlight. Remote Control Instructions 1. Remove the insulation tab of the remote control. 2. This tree is preset to Demo mode. Before selecting other light functions, the Demo mode has to be deactivated. Follow the steps "To deactivate the Demo mode"

under Demo Mode Instructions to do so. Insulation Tab Rear of Remote Control DUAL COLOR LIGHT CONTROLLER & REMOTE CONTROL Choose the light effect by pressing the corresponding button. You can also press the Selector button of the in-line light controller to enjoy light effects in the following sequence:

Warm White & Multicolor Fading Warm White Fading Warm White & Multicolor Alternating Warm White Steady Warm White & Multicolor Slow Fading Multicolor Steady Multicolor Fading Combination of Light Functions 1-2 Combination of Light Functions 1-3 Combination of Light Functions 1-4 Combination of Light Functions 1-5 Combination of Light Functions 1-6 Combination of Light Functions 1-7 Selector Button Remote Controller Light Controller Christmas Tree Model: 23PG90078 Sku # 1005 271 537 TM BATTERY REPLACEMENT 1. Locate the push button near the battery tray at the rear. 2. Using a pin or similar object with a fine tip, press and hold down on the button while pulling on the battery tray to disconnect the tray from the remote controller. 3. Remove the pin and continue to pull the battery tray out completely. 4. Replace the old battery with a new one (Battery type: CR2032). Be sure the new battery is installed with the correct polarity

(+ and -). 5. Push the battery tray back into the remote controller. To activate the DEMO mode:

1. With the tree plugged in, press the Demo Mode button of the remote control or press and hold the Selector button of the in-line light controller for 5 seconds. 2. The Clear Lights will blink 3 times. The tree is now in DEMO mode. 3. Within DEMO mode, the tree will display the COMBO pattern at all times unless the function button is pressed to change the flashing pattern. The tree will return to COMBO pattern whenever the controller is idle for 30 seconds. Demo Mode Selector Button CR2032 CR2032 3V 3V 3V WARNING 1. Dispose used battery properly. Observe local regulations regarding disposal of hazardous waste. 2. Ensure the batteries are installed correctly with regard to polarity (+ and -). 3. This product is powered by a lithium battery. Due to their small size, lithium batteries can easily be swallowed by children. Ingestion of such batteries has been known to cause death. 4. This product contains a lithium battery which if swallowed has been known to cause death. 5. Do not expose light set to moisture. 6. Remove batteries when not used for an extended period of time, or when depleted. 7. Clean the battery contacts prior to battery installation. 8. The external flexible cable or cord of this luminaire cannot be replaced; If the cord is damaged, the luminaire shall be destroyed. 9. Dispose of used batteries properly by following directions on batteries. 10. Use only CR2032 batteries for the remote controller. 11. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK. Demo Mode Instructions This tree is preset to Demo Mode. To deactivate the DEMO mode:

1. With the tree plugged in and in DEMO mode, press the Demo Mode button of the remote control or press and hold the Selector button of the in-line light controller for 5 seconds. 2. The multi-light will flash 5 times indicating that DEMO mode is off. 3. The tree is now in normal mode. Flashing pattern can be set to desired function and tree will remember the last setting until new setting is selected. Remote Controller Light Controller CAUTION:

1. To reduce the risk of fire and electric shock:

a) Use only the power supply that was provided with this product. Using a different adapter will damage the lights and may cause fire, or electrical shock hazards. b) Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal. c) Do not mount or support strings in a manner that can cut or damage wire insulation. 2. The controller and remote controller (if included) can only be used with this product. Troubleshooting Problem Solution The tree does not light Ensure that all tree sections are plugged into each other and that the tree is plugged into the wall. If your tree came with a foot pedal, step on the On/Off button. Check for loose, broken, or missing bulbs and replace as needed with the replacement bulbs provided Section Out?

Ensure pole is fully connected No Lights Working?

Check For Loose Connection Not Full?

Spread Branches Tree Topper?

Branch Hanging Low?

Bend up Run Extension Cord Lights Cycle Through Functions?

This tree is preset to Demo Mode. To deactivate:

Press the DEMO button once. Multicolor lights will blink 5 times. Demo To activate:

Press the DEMO button once. Warm White lights will blink 3 times. Remote Controller Other Issue? Call 1-855-HDHoliday (1-855-434-6543) Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Innovation, Science, and Economic Development Canad licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d' Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil nedoit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment. L'appareil est conforme aux limites d'exposition aux rayonnements spcifies par la FCC/ISED pour les environnements non contrls.

Model: PDT-015-01 Label Label Location Information Model: PDT-015-02 Label Label Location Information Model: PDT-015-03 Label Label Location Information Model: PDT-015-04 Label Label Location Information Model: PDT-015-05 Label Label Location Information Model: PDT-015-06 Label Label Location Information Model: PDT-015-07 Label Label Location Information Model: PDT-015-08 Label Label Location Information Model: PDT-015-09 Label Label Location Information Model: PDT-015-10 Label Label Location Information Model: PDT-015-11 Label Label Location Information Model: PDT-015-12 Label Label Location Information Model: PDT-015-13 Label Label Location Information Model: PDT-015-14 Label Label Location Information Model: PDT-015-15 Label Label Location Information

REPORT No.SZ23090254E01 Annex D EUT Photos 1. Test environment MORLAB Shenzhen Morlab Communications Technology Co., Ltd ., FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road,Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: service@morlab.cn Page 1 of 3 2. EUT REPORT No.SZ23090254E01 MORLAB Shenzhen Morlab Communications Technology Co., Ltd.FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: service@morlab.cn Page 2 of 3 REPORT No.SZ23090254E01 Size of antennawidth 0.7MMlength 200MM MORLAB Shenzhen Morlab Communications Technology Co., Ltd.FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: service@morlab.cn Page 3 of 3

Company Name: Polygroup Evergreen Limited Add: Unit 606, 6th Floor, Fairmont House, No.8 Cotton Tree Drive, Central, Hong Kong Tel: 86-769-83915520-2802 Email: michael.wang@polygroup.com Date: 2023-11-27 Product Model Number: PDT-015-15, PDT-015-01, PDT-015-02, PDT-015-

03, PDT-015-04, PDT-015-05, PDT-015-06, PDT-015-07, PDT-015-08, PDT-

015-09, PDT-015-10, PDT-015-11, PDT-015-12, PDT-015-13, PDT-015-14 FCC ID2A62O-PDT015TS To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize China Certification ICT Co., Ltd (Dongguan) (address: No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China) to act on our behalf on all matters concerning the above named equipment. This shall include the following:

Testing Approval applications and procedures We declare that China Certification ICT Co., Ltd (Dongguan) is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as acts of our own. By:

Contact Listed on FCC Wesbite Title: Manager Email: michael.wang@polygroup.com Telephone: 86-769-83915520-2802 On behalf of: Polygroup Evergreen Limited

Company Name: Polygroup Evergreen Limited Add: Unit 606, 6th Floor, Fairmont House, No.8 Cotton Tree Drive, Central, Hong Kong Tel: 86-769-83915520-2802 Email: michael.wang@polygroup.com Date: 2023-11-07 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attestation letter Dear Sir or Madam, Our product Remote Controller, model: PDT-015-15, PDT-015-01, PDT-015-02, PDT-015-03, PDT-015-04, PDT-015-05, PDT-015-06, PDT-015-07, PDT-015-08, PDT-015-09, PDT-015-10, PDT-015-11, PDT-015-12, PDT-015-13, PDT-015-14, FCC ID: 2A62O-PDT015TS, for marketing purpose, this product only supports 433.895MHz.The other functions, bands and modes was disabled to use by manufacturer in the software, the end user has no capability to activate it. Sincerely, Signature:

Michael Wang Manager

Company Name: Polygroup Evergreen Limited Add: Unit 606, 6th Floor, Fairmont House, No.8 Cotton Tree Drive, Central, Hong Kong Tel: 86-769-83915520-2802 Email: michael.wang@polygroup.com Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023-11-07 FCC ID: 2A62O-PDT015TS Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing Polygroup Evergreen Limited certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing Polygroup Evergreen Limited certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates)as an entity producing covered equipment. Sincerely, Signature:

Michael Wang Manager

Company Name: Polygroup Evergreen Limited Add: Unit 606, 6th Floor, Fairmont House, No.8 Cotton Tree Drive, Central, Hong Kong Tel: 86-769-83915520-2802 Email: michael.wang@polygroup.com Declaration of Similarity Date2023-11-07 To:

FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, We, Polygroup Evergreen Limited hereby declare that we have a product named as Remote Controller, model: PDT-015-15, PDT-015-01, PDT-015-02, PDT-015-03, PDT-015-04, PDT-015-05, PDT-015-06, PDT-015-07, PDT-015-08, PDT-015-09, PDT-015-10, PDT-015-11, PDT-015-12, PDT-015-13, PDT-015-14, FCC ID: 2A62O-PDT015TS. All the models are identical in electrically, the difference are model number and the number of key. Model PDT-015-01 PDT-015-02 PDT-015-03 PDT-015-04 PDT-015-05 PDT-015-06 PDT-015-07 PDT-015-08 PDT-015-09 PDT-015-10 PDT-015-11 PDT-015-12 PDT-015-13 PDT-015-14 PDT-015-15 the number of key 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 We confirm that all information above is true, and well be responsible for all the consequences. Please contact me if you have any question. Best Regards, Sincerely, Signature:

Michael Wang Manager

Company Name: Polygroup Evergreen Limited Add: Unit 606, 6th Floor, Fairmont House, No.8 Cotton Tree Drive, Central, Hong Kong Tel: 86-769-83915520-2802 Email: michael.wang@polygroup.com Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2A62O-PDT015TS To Whom It May Concern, Date: 2023-11-07 Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name:Michael Wang Title:Manager

U.S. AGENT LETTER OF ATTESTATION Date: 2023-10-27 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(7) Filing FCC ID: 2A62O-PDT015TS Polygroup Evergreen Limited certifies that, as of the date of the filing of the application, Polygroup North America, Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. Polygroup Evergreen Limited accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Polygroup North America, Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information:

Name: Polygroup North America, Inc. Address: 303 SW 16th Street, Suite 5, Bentonville, AR, 72712, USA FRN: 0033462706 Tel.: 915.355.5952 Email: eric.wong@polygroup.com Signed by (printed name): Eric Wong Signature:

Applicant: Polygroup Evergreen Limited Address: Unit 606, 6th Floor, Fairmont House, No.8 Cotton Tree Drive, Central, Hong Kong FRN: 0032448086 Tel: 86-769-83915520-2802 Email: michael.wang@polygroup.com Signed by (printed name): Michael Wang Signature: