FCC ID: 2APJZ-CW006 Remote Controller

NEED HELP?

DO NOT RETURN TO STORE. PLEASE VISIT US AT:

www.polygroupstore.com OR 1-888-919-0070 TREE ASSEMBLY INSTRUCTIONS Congratulations on purchasing your new tree from Polygroup!

This tree comes with Quick Set technology - allowing you to set up your tree and light it up in minutes!

Carefully follow the instructions below on how to quickly and easily set up your new tree. Please scan code to learn how to shape and set up your tree 1. Before you start to assemble your tree, choose an appropriate location near a wall outlet. 2. Assemble the tree stand and place on a level surface. (See Fig. A) Fig. A - Tree Stand Assembly Unfold the legs and lay the stand in a flat area. Then slide the locking disc downward and snap into place.

*Electrical Rating For The Tree

(For Indoor Use Only) Input: 120VAC, 60Hz, 0.38A Output: 29V DC 0.621A Do Not Tamper Internal Parts Open the cap cover Align both arrows in a straight line before sliding down to insert Fig. B - Tree and Light Assembly Tree top Section 2 Section 1 Insert Green Label Plug into Adapter Adapter To Be Plugged Into Wall Outlet 3. Each tree section is numbered with a sticker. Please identify all sections before assembling. 4. Assemble the tree from bottom to the top. Start with the bottom section and remove the protective cap before inserting into the assembled stand. Make sure the pole is firmly inserted and secured into the stand. 5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top. 6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all wires are free of branch hinges. 7. Insert green label extension cord into adapter and adapter insert into the wall outlet (See Fig. B), your entire tree should now be lit. 8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from the pole and fan out one to the right, one to the left and one at the center of the main stem. (See Fig. C) Fig. C Top view Side view MODEL #: TG76M2AGMD11 1 9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform look. Shift branches to fill any gaps. Your Christmas tree is now complete and ready to be decorated. STORAGE INSTRUCTIONS 1. Unplug the power adapter from the wall outlet first and then remove all ornaments and decorations. 2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to remove from section below and fold all branches toward the pole. 3. Continue by gently lifting straight up each section(s) from the section below and fold all branches toward the pole until the bottom section is removed from the tree stand. Cover the cap on the poles to avoid damaging the internal parts. (See Fig. D) 4. Carefully place all tree sections into shipping box and tape it shut. 5. When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree to excessive heat or humidity may damage your tree. Fig. D TROUBLESHOOTING TIPS For Pre-lit Trees, If The Tree Does Not Illuminate 1. Please check to make sure that all plugs are properly connected and the adapter is plugged into the wall outlet. 2. Turning the poles gently to make sure pole to pole are connected into place. 3. Check for loose connection between light string plugs and extension cords. Loose Hinge Pin 1. Extra hinge pins are included for repairing the hinges. Place the branch into the slot of the bracket. 2. Insert a new hinge pin through the hole and secure using the retainer washer.(See Fig. E) Fig.E REMOTE CONTROL INSTRUCTIONS Remove the insulation tab of the remote control. Insulation Tab HOW TO USE THE DUAL COLOR LIGHT CONTROLLER AND REMOTE CONTROL:

Press A selector button on the Dual Color Light Controller or Remote Controller to select among:

(1) CLEAR AND MULTI-COLOR ALTERNATING;

(2) CLEAR LIGHTS; (3) MULTI LIGHTS Press B selector button on the Dual Color Light Controller or Remote Controller to select among:

(1) COMBO (2) STEADY (3) SHIMMER (4) STARFIELD

(5) CHASER (6)LIGHTNING (7) STACKER A selector button B selector button WARNING:

This product may potentially trigger seizures for people with photosensitive epilepsy when using the motion effect light modes. 2 Battery Replacement 1. Loosen the screw of the battery cover with a screwdriver (not included). 2. Replace the used battery with a new CR2032 button cell battery (not included). Make sure that the battery is installed with the correct polarity (+ and -). 3. Retighten the screw to close and secure the battery cover. WARNING 1. This remote controller is powered by a lithium battery. Due to their small size, lithium batteries can easily be swallowed by children. Ingestion of such batteries has been known to cause death. 2. This is a lithium battery which if swallowed has been known to cause death. 3. SMALL PARTS, KEEP BATTERIES OUT OF REACH OF CHILDREN. 4. Do not expose the remote controller to moisture. 5. Remove batteries when not used for an extended period of time, or when depleted. 6. Dispose of used batteries properly. 7. Use only CR2032 batteries for the remote controller. 8. Clean the battery contact surfaces gently prior to battery installation. 9. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK. CAUTION:

To reduce the risk of fire and electric shock:

a) Use only the power supply that was provided with this product. Using a different adapter will damage the lights and may cause fire, or electrical shock hazards. b) Do not install on trees having needles, leaves or branch covering of metal or materials which look like metal. c) Do not mount or support strings in a manner that can cut or damage wire insulation. 3 IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed including the following:

READ AND FOLLOW ALL SAFETY INSTRUCTIONS. a) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation. b) This seasonal use product is not intended for permanent installation or use. c) Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat. d) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails. e) Do not let lamps rest on the supply cord or on any wire. f) Unplug the product when leaving the house, or when retiring for the night, or if left unattended. g) This is an electric product not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it. h) Do not use this product for other than its intended use. i) Do not hang ornaments or other objects from cord, wire, or light string. j) Do not close doors or windows on the product or extension cords as this may damage the wire insulation. k) Do not cover the product with cloth, paper or any material not part of the product when in use. l) The supply cord cannot be replaced. If the cord is damaged the product should be scrapped. m)The lamps of this product are not replaceable. Do not attempt to change or modify the lamps. n) For LED string only. To reduce the risk of fire or electric shock, do not attempt to replace lamps or modify string. o) Read and follow all instructions that are on the product or provided with the product. SAVE THESE INSTRUCTIONS. SPARE PARTS Each tree includes hinge pins/washers. If extra parts are needed, please contact our customer service center. CUSTOMER SERVICE FOR CHRISTMAS TREES For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase. Please contact us at 1-888-919-0070 or visit our website at www.polygroupstore.com. One of our customer service representatives will be happy to assist you. Tree ID#:

Customer Name:

Tree UPC#:

Address:(No P.O. Boxes) Store Purchased:

City & State:

Specify Problem:

Zip Code:

Day Phone:

Date Purchased:

TREE ID# IS LOCATED ON END PANEL OF BOX. TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS. 4 FCC Warning:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. ISEDC Warning:

This device complies with Innovation, Science, and Economic Development Canad licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. RF exposure and compliance. The device is compliance with RF exposure guidelines, users can obtain Canadian information on Le prsent appareil est conforme aux CNR d' Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil nedoit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Aprs examen de ce matriel aux conformit ou aux limites dintensit de champ RF, les utilisateurs peuvent sur lexposition aux radiofrquences et la conformit and compliance dacqurir les informations correspondantes.

EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Polygroup Trading Limited ADD: Unit 606,Fairmont House, 8 Cotton Tree Drive, Central, Hong Kong, China Tel: (852) 3583 2222 E-mail: Daniel.liu@polygroup.com FCC Authorization FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 2020-05-21 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We, Polygroup Trading Limited, Hereby authorizes Bay Area Compliance Laboratories Corp to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature:

Print Name: Daniel.Liu Title: Compliance Manager QA-FR-170-B

Polygroup Trading Limited ADD: Unit 606,Fairmont House, 8 Cotton Tree Drive, Central, Hong Kong, China Tel: (852) 3583 2222 E-mail: Daniel.liu@polygroup.com FCC Confidential Authorization Date: 2020-05-21 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2APJZ-CW006 In accordance with Sections 0.457 and 0.459 of the Commissions Rules, Polygroup Trading Limited hereby requests long-term confidential treatment of information accompanying this application as outlined below:

The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Block Diagram Schematics Operation Description Sincerely Yours, Signature:

Print Name: Daniel Liu Title: Compliance Manager