FCC ID: TBQRX03-LR2WTI CAR ALARM

4180069TI MANUAL 1. Antenna Model : 4180069TI 2. Technology: Lora 2-WAY 3. Max Range : 2 miles 4. LED : status indication 5. Button: setup key pin1- Rx (Data from antenna, 0-5 Volts) pin2- Tx (Data from Host, 0-5 Volts) pin3- GND (Ground from Host) pin4- 12V (Power from Host, 12V ) 6 Connect to Host (To plug Weblink or RF-Decoder/Antenna) The Control Center,typically located on the upper part of the front windshield.It consists of:

The In-vehicle system antenna. The Status LED,as a visual indicator of the systems status. The Control button,for placing the system into Valet Mode and to perform the Emergency Override operation. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 25cm between the radiator and any part of your body. is not The manufacturer FCC Statement This device complies with FCC Rules part 15. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) This device must accept any interference that may be received, including interference that may cause undesired operation. responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modification could void the users authority to use the equipment. NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. interference to radio or this equipment does cause harmful television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. If

PORTMAN ELECTRONICS (DONGGUAN) CO., LTD. PORTMAN ELECTRONICS (DONGGUAN) CO., LTD. DATE:2022-3-30 Federal Communications Commission Federal Communications Commission Authorization & Evaluation Division Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act asAgent Authority to Act asAgent No.101, Building 8, Jianyan Testing Group Shenzhen Co., Ltd.; No.101, Building 8, On our behalf, I appoint Jianyan Testing Group Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community,Xinqiao Street, Bao'an Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community,Xinqiao Street, Bao'an Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community,Xinqiao Street, Bao'an District, Shenzhen, Guangdong,People's Republic of China., to act as our agent in the District, Shenzhen, Guangdong,People's Republic of China. to act as our agent in the preparation of this application for equipme nt certification. I certify that submitted preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is documents properly describe the device or system for which equipment certification is documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the sought. I also certify that each unit manufactured, imported or marketed, as defined in the sought. I also certify that each unit manufactured, imported or marketed, as defined in the s regulations will have affixed to it a label Federal Communications Commissions regulations will have affixed to it a label Federal Communications Commission identical to that submitted for approval with this application. identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I For instances where our authorized agent signs the application for certification on our behalf, I For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, ng with the terms and conditions for certification, acknowledge that all responsibility for complyi NO#10 , Luyi 2 Road, Keyuancheng, Tangxia as specified by Nemko Canada Inc, still resides with NO#10 , Luyi 2 Road, Keyuancheng, Tangxia as specified by Nemko Canada Inc, still resides with Town Dated this 2022-3-30 By:

Wang wu Chang Printed Signature Title: Manager On behalf of :

Telephone:

PORTMAN ELECTRONICS PORTMAN ELECTRONICS

(DONGGUAN) CO., LTD.

(DONGGUAN) CO., LTD. 86-769-8299-

-3888