FCC ID: TBQT12-SS2W-1 CAR ALARM

185TWSP-1, 185TWXPR-1 MANUAL

1. Transmitter Model : 185TWSP-1, 185TWXPR-1

2. Technology: SST 2-Way

3. Max Range : 1800M

4. LED : status indication

5. Battery:CR2450

6. Button:

BUTTON

ACTION

FUNCTION

1

2

3

4

5

1x

1.5sec

3sec

1x

1.5sec

3sec

2x

2sec

1x

1x

Arm / Lock

Silent arm

Panic start / stop

Disarm / Unlock

Silent disarm

Panic start / stop

Remote Start

Trunk release

Aux CH4 output

Aux CH5 output

If

is not

The manufacturer

FCC Statement

This device complies with FCC Rules part 15. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and (2) This device must

accept any interference that may be received, including interference that may cause

undesired operation.

responsible for any radio or TV

interference caused by unauthorized modifications to this equipment. Such modification

could void the user’s authority to use the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and,

if not

installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a

particular installation.

interference to radio or

this equipment does cause harmful

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

Consult the dealer or an experienced radio/TV technician for help.

SAR Information Statement

Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed

the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications

Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish

permitted levels of RF energy for the general population. The guidelines are based on standards that

were developed by independent scientific organizations through periodic and thorough evaluation of

scientific studies. The standards include a substantial safety margin designed to assure the safety of all

persons, regardless of age and health. The exposure standard for wireless mobile phones employs a

unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is

1.6 W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certified power

level in all tested frequency bands. Although the SAR is determined at the highest certified power

level, the actual SAR level of the phone while operating can be well below the maximum value. This is

because the phone is designed to operate at multiple power levels so as to use only the power

required to reach the network. In general, the closer you are to a wireless base station antenna, the

lower the power output. Before a phone model is available for sale to the public, it must be tested and

certified to the FCC that it does not exceed the limit established by the government adopted

requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and

worn on the body) as required by the FCC for each model. As described in this user guide, is

0.604W/Kg(Body-worn measurements differ among phone models, depending upon available

accessories and FCC requirements).

phone with all reported SAR levels evaluated as in compliance with the FCC RFexposure guidelines.

SAR information on this model phone is on file with the FCC and can be found under the Display Grant

section of http://www.fcc.gov/ oet/fccid after searching on

FCC ID: TBQT12-SS2W-1 Additional information on Specific Absorption Rates (SAR) can be found on

the Cellular Telecommunications Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com.

* In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg

(W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin of safety to

give additional protection for the public and to account for any variations in measurements.

The FCC has granted an Equipment Authorization for this model

Body-worn Operation

This device was tested for typical body-worn operations. To comply with RF exposure

requirements, a minimum separation distance of 0mm must be maintained between the user’s

body and the handset,

including the antenna. Third-party belt-clips, holsters, and similar

accessories used by this device should not contain any metallic components. Body-worn

accessories that do not meet

these requirements may not comply with RF exposure

requirements and should be avoided. Use only the supplied or an approved antenna.

PORTMAN ELECTRONICS (DONGGUAN) CO., LTD. Company:PORTMAN ELECTRONICS (DONGGUAN) CO., LTD. Address:NO#10 , Luyi 2 Road, Keyuancheng, TangxiaTown,DONGGUAN CITY ,GUANGDONG PROVINCE CHINA 523718 Product Name:CAR ALARM Model Number(s):185TWSP-1,185TWXPR-1 Product Description:CAR ALARM We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Title:

Wang wu Chang Manager Date: 2021-7.16 Company: PORTMAN ELECTRONICS (DONGGUAN) CO., LTD.

PORTMAN ELECTRONICS (DONGGUAN) CO., LTD.

Office of Engineering Technology

Federal Communications Commission

7435 Oakland Mills Road

Columbia, MD 21046

USA

Subject; Request for Confidentiality

FCC ID:TBQT12-SS2W-1

Date: 2021-7-16

To Whom It May Concern,

Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we

are requesting the Commission to withhold the following attachment(s) as confidential

documents from public disclosure indefinitely.

These documents contain detailed system and equipment descriptions and are considered as

proprietary information in operation of the equipment. The public disclosure of these documents

might be harmful to our company and would give competitors an unfair advantage in the market.

Schematic Diagram

Block Diagram

Parts List

Operational Description

Tune-up Procedure

External Photos

Test Setup Photos

Internal Photos

User Manual

In additional to above mentioned documents, in order to comply with the marketing regulations

in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that

business sensitive information remains confidential until the actual marketing of newly

authorized devices, we request Short Term Confidentiality of the following attachment(s);

For 45 days, pursuant to Public Notice DA 04-1705.

OR

For 180 days pursuant to KDB 726920 D01.

It is our understanding that all measurement test reports, FCC ID label format and

correspondence during the certification review process cannot be granted as confidential

documents and this information will be available for public review once the grant of equipment

authorization is issued.

Sincerely,

Signature:

Name:Wang wu Chang

Title:Manager

Declaration Letter

We, PORTMAN ELECTRONICS (DONGGUAN) CO., LTD. declared that our product

CAR ALARMn item No.: 185TWSP-1,185TWXPR-1 were identical

the

electrical circuit design, layout, components used and internal wiring, with only

difference being model name.

inside,

Sincerely your

Signature:

Name/Title: Wang wu Chang

Tel. No.: 86-769-8299-3888

E-Mail: changew@ptm.com.cn

Company: PORTMAN ELECTRONICS (DONGGUAN) CO., LTD.

Date：2021-7-16