5-BUTTON LCD 2-WAY QUICK START OPERATION GUIDE Visit www.CarAlarm.com today To Download the latest operation guide and learn more about system upgrades & other features!
PROGRAMMING REMOTES TO THE SYSTEM Remote programming is dependant on the system being controlled. Please consult your dealer or the system guide for the proper programming instructions. Problems? Questions? Contact Customer Service:
800-554-4053 (toll free) | +1-770-942-9876 (outside USA) Scan to register
& download the latest operation guide at CarAlarm.com!
/omegard
/c/omegard This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna., Increase the separation between the equipment and receiver., Connect the equipment into an outlet on a circuit different from that to which the receiver is connected., Consult the dealer or an experienced radio/TV technician for help., Warning! Changes or modi cations made to this equipment not expressly approved by the part responsible for compliance could void the uses authority to operate the equipment NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modi cations to this equipment. Such modi cations could void the users authority to operate the equipment. 4 Copyright 2019 Omega Research & Development Technologies, Inc. OC_55308_20190712 OMPATIB 5-BUTTON LCD 2-WAY QUICK START OPERATION GUIDE REPLACING YOUR REMOTE BATTERY STEPS REMOTE PART#
1) (551 only) Find the part # on the back of the remote to identify the battery. 2) (551 only) Locate the relief in case near the key chain and separate the case halves to access & replace the batteries. 553 551 SECURITY, KEYLESS ENTRY, & CONVENIENCE FUNCTIONS FUNCTION BUTTON(S) REMOTE CONFIRMATION NOTE BATTERY (QTY) Rechargable CR2032 Lock & Arm*
Unlock & Disarm*
Silent Lock*
Silent Unlock*
Lock or arm Displays The doors will lock. Unlock or D_Arm Displays Beep Beep x 1 x 2 The doors will unlock. The doors will lock with no audible con rmation. Perform within 1 second. The doors will unlock with no audible con rmation. Trunk/Hatch Release for 3 sec. TRUNK OPEN Displays By default, the system will also disarm/unlock. Panic*
or for 3 sec. PANIC Displays The system will sound the horn/siren for Panic Mode. Register today at www.CarAlarm.com For warranty info & Download the latest operation guide. 1 5-BUTTON LCD 2-WAY QUICK START OPERATION GUIDE REMOTE START FUNCTIONS FUNCTION BUTTON(S) LCD CONFIRMATION NOTE Engine Start/Stop Run Time Extender*
Auto Start Mode*
x 2 START + Melody Upon successful remote start the clock will display the remaining engine run time (M:SS). Take Over: Turn ignition key ON, press brake pedal.
&
Chirp + START ON TEMP START ON or TEMP START OFF Clock will restart the run timer (only allowed once per remote start cycle). Remote starts your vehicle every 2, 3, or 4 hours (programmable) or upon temperature threshold (set in the remote start unit). WINDOW-MOUNT ANTENNA/RECEIVER Valet / Programming Button Status LED Status LED Multi-Car Button Lock Status Update*
OTHER CONTROLLER FUNCTIONS FUNCTION BUTTON(S) Remote Valet*
Hold
&
for 3 sec LCD CONFIRMATION Beep + Screen ashes NOTE This disables remote start and the security system. The status LED will turn on. Repeat this process or press valet button once to exit valet mode. Hold
&
3 sec for Beep + Shift icon The Shift icon appear when in car 2 opera-
tion. Repeat to return to car 1 operation. Hold
&
for 3 sec Hold
&
for 3 sec
, x 2 , x 3 ,
&
Beep + Screen ashes When button lock is on the remote will not transmit. When any button is pressed the screen will ash 5x. Repeat to unlock. Beep + Icons change
(if status has changed) The screen icons will update to the current status of the system. AUX 1 AUX 2 AUX 3 AUX 4 The screen will turn on The screen will turn off AUX1 - Write function in FUNCTION column AUX2 - Write function in FUNCTION column AUX3 - Write function in FUNCTION column AUX4 - Write function in FUNCTION column The remote will resume all normal functions. The remote will not function until powered on. 5-BUTTON LCD 2-WAY QUICK START OPERATION GUIDE 2WAY OPTIONS OPTIONS Set Clock (H:M) Set Alarm Clock (H:M) Change Alarm Melody Alarm Clock On/Off Set Timer (H:M) Set Timer Melody Timer On/Off Change Start/Stop Melody 12/24 Hour Clock OTHER FEATURES Alarm Clock On/Off Silent Mode On/Off Parking Timer PROCEDURE for 5 seconds. The controller will beep Hold indicating it has entered option programming. Tap to scroll through each option. or to scroll through each option Press setting. for 3 seconds or no activity for 15 seconds Hold to exit option programming BUTTON(S) LCD CONFIRMATION
&
.
&
Melody + Clock icon Beep OR Vibrate icon. Hold
& press
. Pressing the timer length options. will scroll thru
*All functions are dependent upon vehicle & system availability. Consult your installer to con rm feature availability. 3
*All functions are dependent upon vehicle & system availability. Consult your installer to con rm feature availability. Power ON Hold for 3 sec. Power OFF Hold for 5 sec. 2