FCC ID: 2ASC3RBT202501 Robotic Lawnmower

Owner's Manual EN FR ES EyePilot EyePilot EyePilot EN FR ES Owner's Manual Manuel utilisateur Instrucciones de usuario KR272 P04 P23 P42 Mower SN Code En FR To match the app account with the mower, please scan the SN code. Pour associer le compte de lapplication la tondeuse, veuillez scanner le code SN. ES Para vincular la cuenta de la aplicacin con la cortadora de csped, escanee el cdigo SN. WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

Lead from lead-based paints;

Crystalline silica from bricks and cement and other masonry products;

Arsenic and chromium from chemically-

treated lumber. 4 EN Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. WARNING: This product can expose you to chemicals including lead and Di(2-

ethylhexyl)phthalate (DEHP) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings. ca.gov. WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Carefully read the instructions for the safe operation of the machine. Save all warnings and instructions for future reference.

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance. WARNING: For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance. IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE Safe operation practices Training a) Read the instructions carefully. Make sure you understand the instructions and be familiar with the controls and the proper use of the appliance. b) Never allow people unfamiliar with these instructions or children to use the appliance. Local regulations can restrict the age of the operator. c) The operator or user is responsible for accidents or hazards occurring to other people or their property. Preparation a) Confirm that the virtual boundary is established as instructed and the virtual boundary is regularly maintained. Before each working cycle, the machine goes around the working area to check whether the virtual boundary exists, if it does not exist, the machine will shut down. The virtual boundary specifies the work area where the machine is allowed to operate. The RTK antena in the machine senses when it is approaching the virtual boundary. When the machine hits an obstacle or approaches the virtual boundary the product selects a new direction. b) Periodically inspect the area where the appliance is to be used and remove all stones, sticks, wires, bones, and other foreign objects. c) Periodically visually inspect to see that the blades, blade bolts and cutter assembly are not worn or damaged. Replace worn or damaged blades and bolts in sets to preserve balance. d) On multi-spindle appliances, take care as rotating one blade can cause other blades to rotate. e) WARNING! The lawnmower shall not be operated without the guard in place. Operation 1. General a) Never operate the appliance with defective guards, or without safety devices, for example deflectors, in place. b) Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times. rotating blades. Never place your hands or feet close to or under the body when robotic lawnmower is in operation. m)To avoid using the machine and its peripherals in bad weather conditions especially when there is a risk of lightning. n) Not to touch moving hazardous parts before these have come to a complete stop. o) For machines used in public areas, that warning signs shall be placed around the working area of the machine. They shall show the substance of the following text:

Warning! Automatic lawnmower! Keep away from the machine! Supervise children!

2. Additionally when the appliance is operating automatically a) Do not leave the machine to operate unattended if you know that there are pets, children or people in the vicinity. b) Please set the smart phone to automatically lock the screen after 30 s to prevent the app from being misused by others. c) Never pick up or carry an appliance while the Maintenance and storage motor is running. d) Operate the disabling device from the appliance

- Before clearing a blockage;

- Before checking, cleaning or working on the appliance. e) It is not permitted to modify the original design of robotic lawnmower. All modifications are made at your own risk. f) Start robotic lawnmower according to the instructions. When the power is on, make sure you keep your hands and feet away from the rotating blades. Never put your hands and feet under the mower. g) Never lift up robotic lawnmower or carry it when the power is on. h) Do not let persons who do not know how robotic lawnmower works and behaves use the mower. i) Do not put anything on top of robotic lawnmower or its charging station. j) Do not allow robotic lawnmower to be used with a defective blade disc or body. Neither should it be used with defective blades, screws, nuts or cables. k) Always switch off robotic lawnmower when you do not intend to use the mower. Robotic lawnmower can only start when the power is on and the correct PIN code has been entered. l) Keep your hands and feet away from the 5 EN WARNING! When the mower is turned upside down the power must always be off. The power should be off during all work on the mowers underframe, such as cleaning or replacing the blades. a) Keep all nuts, bolts and screws tight to be sure the appliance is in safe working condition. b) Inspect the robotic lawnmower each week and replace worn or damaged parts for safety. c) Check especially that the blades and blade disc are not damaged. Replace all blades and screws at the same time if necessary so that the rotating parts are balanced. d) Ensure that only replacement cutting means of the right type are used. e) Ensure that batteries are charged using the correct charger recommended by the manufacturer. Incorrect use may result in electric shock, overheating or leakage of corrosive liquid from the battery. f) In the event of leakage of electrolyte flush with water/neutralizing agent, seek medical help if it comes into contact with the eyes etc. g) Servicing of the appliance should be according to manufacturers instructions. Recommendation To connect the machine and/or its peripherals only to a supply circuit protected by a residual current device (RCD) with a tripping current of not more than 30 mA. Residual risks To avoid injuries, wear protective gloves when replacing the blades. Transport The original packaging should be used when transporting robotic lawnmower over long distances. To safely move form or within the working area:

a) Press the STOP button to stop the mower. You select the four-digit PIN code when you start the mower for the first time. b) Always switch off robotic lawnmower if you intend to carry the mower. c) Carry the mower by the handle at the front of the mower. Carry the mower with the blade disc away from the body. Safety Warnings for battery pack inside the tool a) Do not dismantle, open or shred battery pack. b) Do not expose battery pack to heat or fire. Avoid storage in direct sunlight. c) Do not short-circuit a battery pack. Do not store battery packs haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by other metal objects. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or fire. d) Do not subject battery pack to mechanical shock. e) In the event of battery leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice. f) Do not use any battery pack which is not designed for use with the equipment. g) Keep battery pack out of the reach of children. h) Always purchase the battery pack recommended by the device manufacturer for the equipment. i) Keep battery pack clean and dry. j) Wipe the charging terminals with a clean dry cloth if they become dirty. k) Battery pack need to be charged before use. Always use the correct charger and refer to the manufacturers instructions or equipment manual for proper charging instructions. l) Do not leave battery pack on prolonged charge when not in use. m)Recharge only with the charger specified by Kress. Do not use any charger other than that specifically provided for use with the equipment. n) Retain the original product literature for future reference. o) Use only the battery pack in the application for which it was intended. p) Dispose of properly. q) Do not mix cells of different manufacture, capacity, size or type within a device. r) Keep the battery away from microwaves and high pressure. User manual requirements for wireless product a) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. b) Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. c) This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. d) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not 6 EN installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/

TV technician for help. For mobile device a) To satisfy FCC &ISED RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. b) To ensure compliance, operations at closer than this distance is not recommended. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Region Selection (for Wi-Fi 2.4G device) Limited by local law regulations, version for North America does not have region selection option. 7 EN Symbols WARNING robotic lawnmower can be dangerous if incorrectly used. Read through the Operators manual carefully and understand the content before using your robotic lawnmower. WARNING - Keep a safe distance from the machine when operating. WARNING Operate the disabling device before working on or lifting the machine. WARNING Do not ride on the machine. Class III appliance Li-Ion battery, battery must be recycled. Do not burn. 8 EN Batteries may enter water cycle if disposed improperly, which can be hazardous for ecosystem. Do not dispose of waste batteries as unsorted municipal waste. Do not wash the machine with a high pressure washer Prohibit disassembling the machine without authorization. To reduce the risk of injury, user must read instruction manual POSITEC Inc. has established a partnership with the RBRC Corporation to recycle any Positec batteries with the RBRC-call2recycle seal. For environmental protection, please do not discard batteries in the trash. After the batteries' life cycle is ended, then please call 1-800-822-8837 for a free service that will properly dispose of the battery. Component list A D J Owner's Manual B C E F G H I 9 EN This picture is only for reference A B C D E EyePilot robotic lawn mower Charging pile Charging base Power adapter Wheel brushes F G H I J Charging base fixing nails Spare blades Hex key Screws for fixing blades Manuals Not all the accessories illustrated or described are included in standard delivery. Getting to know EyePilot STOP button Touch button RTK module Rain sensor Front camera Fender A Drive wheel Front wheel 10 EN Charging contact Head light Edge blade knob 1 2 3 2.55 in (65 mm) 2.95 in (75 mm) 3.35 in (85 mm) Physical bumper (handle) Cutting disc Edge blade disc B Battery compartment This picture is only for reference Getting to know power supply 11 EN Icon Type Function Description Green Red Off Blue Green Off Solid: Charging function normal Breathing: Charging in progress Solid: Charging function fault Flashing: Battery polarity short-circuit fault No power supply to the station. Solid: Wi-Fi not connected, please make sure the charging station is within Wi-Fi coverage Solid: Wireless module operating normally Wireless module not powered Parts and functions STOP button 4G indicator light Wi-Fi indicator light Bluetooth indicator light RTK indicator light Battery indicator light Display area Combination key (START and Combination key (HOME and

) Confirm Power on/off Control Power on Power off 12 EN Press power button for 5s Press power button for 5s Enter applink mode Press "START" for 3s Start mowing Stop mowing Return home Press "START" and then "OK"

Press "STOP"

Press "HOME" and then "OK"

How to restart the mower Power off and power on, press "START" and then "OK"

How to change pin code Press "START" and "HOME" together for 5s, use START or HOME to choose new PIN, press "OK" to confirm How to unlock the display Enter PIN code by "START" or "HOME", press "OK" to confirm How to check firmware version number Press "HOME" for 5s Technical data Type KR272 (100-299 - designation of machinery, representative of Robotic Lawnmower) Rated voltage No load speed Cutting area Cutting diameter Cutting height Cutting height positions Zero trim (edge cut blade) Edge cut height Edge cut width Camera Battery type Battery model Charging time approx. Charger model Charger rating Machinery weight Protection degree App Frequency bands for Bluetooth Maximum output power for bluetooth Frequency bands for Wi-Fi Maximum output power for Wi-Fi Maximum slope within the work surface KR272 20 V Max.*

2600 /min 0.5 acre (2000 m2) 8.7 in (22 cm) 1.57-3.54 in (40-90 mm) 11 Y 1: / 2: / 3:

2.55 in (65 mm) / 2.95 in (75 mm) / 3.35 in (85 mm) 4.33 in (110 mm) Stereo Lithium-ion KA3006 95 min KA3733 Input: 120 V~60 Hz, 90 W, Output: 20 V, 3.0 A 26.7 lbs (12.1 kg) III Y 2400-2483.5 MHz 8 dBm 2412-2462 MHz 30 dBm 21.8 (40%)**

13 EN Charging temperature range 32 F ~ 131 F (0 C ~ 55 C)

* Voltage measured at no load. Initial battery voltage reaches maximum of 20 volts. Nominal voltage is 18 volts.

** Under flat slope test conditions in the Positec laboratory. Technical Data For 4G Band GSM900(B8) DCS1800(B3) WCDMA B1 WCDMA B8 WCDMA Band V LTE-FDD B1 LTE-FDD B3 LTE-FDD B7 LTE-FDD B8 LTE-FDD B20 LTE-FDD B28 LTE-TDD B38 LTE-TDD B40 LTE Band 3 LTE Band 41 14 EN Tx(Mhz) 880-915 1710-1785 1920-1980 880-915 824-849 1920-1980 1710-1785 2500-2570 880-915 832-862 703-748 2570-2620 2300-2400 1710-1785 2535-2675 Rx(Mhz) 925-960 1805-1880 2110-2170 925-960 869-894 2110-2170 1805-1880 2620-2690 925-960 791-821 758-803 2570-2620 2300-2400 1805-1880 2535-2675 RF Output Power (Max) 33dBm 30dBm 24dBm 24dBm 24dBm 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm Technical data for 4G-GNSS Global Navigation SatelliteSystem (GNSS) GPS / GLONASS / BDS / Galileo / SBAS Nominal Frequency Accessories Screw for fixing blades Charging base Charging base fixing nails Hex key Blade 1559-1610 MHz 1215-1300 MHz 1164-1215 MHz KR272 13 1 8 1 13 Wheel brushes (1 pair) Battery pack (KA3006) Charger (KA3733) 1 1 1 We recommend that you purchase genuine accessories listed in the above list from the same store that sold you the tool. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice. Intended Use The garden product is intended for domestic lawn mowing. It is designed to mow often, maintaining a healthier and better looking lawn than ever before. Depending on the size of your lawn, EyePilot may be programmed to operate at any time or frequency. It is not intended for digging, sweeping or snow cleaning. Maintenance Your EyePilot works hard and needs to be cleaned and checked from time to time. Some parts will require replacement as they become worn. Never use your EyePilot with defective on/off switch. Switch off the machine before carrying out any service or maintenance. Here's how to take care of your EyePilot. 15 EN 1 Keep it Sharp WARNING: Before cleaning, adjusting, or replacing the blades, turn your EyePilot OFF and put on protective gloves. WARNING: When fitting new blades, make sure you replace ALL the blades. Always use new screws when fitting blades. This is important to ensure blade retention and balance the blade turning disc. Failure to use new screws could cause serious injury. The EyePilot does not cut grass like other mowers. Its cutting blades are razor sharp on 2 edges and rotate in both directions for maximum cutting capacity. Redesigned blade profile better prevents grass clippings from getting caught in the gap between the disc and the blade. And with new material, the service life of each cutting blade will be longer than that of other brands when it is programmed to mow every day. Always check to see if the blades are chipped or damaged and replace them if they are. When the cutting blades are dull and worn out, they should be replaced with the spare blades provided with your EyePilot. Spare blades are also available at your nearest Kress retailer. 1 2 A. Replace the blades 16 EN Usually your EyePilot's blades need to be checked every two weeks and replaced every month, you can adjust the frequency of replacing the blade according to the cutting quality of the lawn. When replacing the blades, make sure to replace all of them at the same time. You can replace them with one of the spare blade kits and extra blade screws supplied with your EyePilot. Before attempting to replace your EyePilots blades, turn the power off and put on protective gloves and follow these steps:

1. Gently flip the EyePilot over. 2. Remove the battery cover and remove the battery. 3. Take the screws off the blades with a screwdriver. 4. Firmly screw on the new blades. 5. Refit the battery and the battery cover. Important: After screwing the blade to the blade disc, make sure the blade is able to spin freely. 2 Keep it Clean WARNING: Before cleaning, turn your EyePilot OFF. Put on protective gloves before cleaning the blade turning disc and do not rinse or flush with water. WARNING! YOUR EyePilot can only be washed by using a hose! DO NOT use high pressure washer on your EyePilot. High pressure water can go inside the sealings and damage electronic and mechanical parts. A. Cleaning the body Your EyePilot will live a much happier and longer life if it is cleaned regularly. Since your EyePilot is an electric machine, you will need to take care when cleaning. Hose water clean is supported. It is best to use a spray bottle filled with water. When cleaning the machine body, use a soft brush or clean cloth and avoid using solvents or polishes. Lastly, remove all build up of grass clippings and debris. 17 EN B. Cleaning the underside Again, it is important that you power the EyePilot OFF and wear protective gloves before touching the blade turning disc. First, flip your EyePilot upside down to expose its underside. Here you will see the blade disc, the chassis, and the front wheel and driving wheels. Clean everything thoroughly with a soft brush or moist rag. Hose water clean is supported. Rotate the blade disc to ensure it rotates freely. Check the blades spin freely around the fixing screws. Remove any obstructions. IMPORTANT: Remove any stuck debris so that it does not cause a crack in the blade disc. Even the tiniest crack can decrease your EyePilot's mowing output. C. Clean the contact pins and the charging strips Clean the contact pins located on the charging base and the charging strips located on the EyePilot using a cloth. Remove any built up grass clippings or debris around the contact pins and charge strips periodically to ensure the EyePilot successfully charges each time. D. Clean the camera We recommend that users regularly wipe the camera with a rag. 3 Battery life The heart of the EyePilot is its 20V Li-Ion Battery. For proper storage of the battery, make sure it is fully charged and kept in a cool dry place between -4 F ~ 140 F (-20oC~+60oC). NOTE: The recommend EyePilot operation temperature is between 0-55oC. The life-span of the EyePilots battery depends on various factors, such as:

The length of the mowing season in your region Amount of hours the EyePilot mows per day Battery maintenance during storage EyePilot can be charged manually. 1. Connect the charging base to a suitable power supply. The green light on the charging base will turn on. 2. Manually dock the EyePilot into the charging base while the EyePilot is powered off. 3. The green light on the charging base will be flashing and EyePilot will begin to charge. 18 EN 4 Winter hibernation Your EyePilot will live longer and healthier if it is allowed to hibernate. So even though it is tough, we recommend storing your EyePilot in your shed or garage during the winter. Before you prepare your EyePilot for winter hibernation, we recommend you:

Thoroughly clean your EyePilot Fully charge the battery Turn the power off To maximize the battery life, fully charge the battery before storage during winter. WARNING: Protect the underside of EyePilot from water. NEVER store EyePilot upside down outdoors. NOTE: When bringing the EyePilot back to work after winter hibernation, make sure the charging strips and contact pins are clean. We recommend using a fine grade emery cloth to clean the contacts. Using the app, make sure the date and time are correct and send EyePilot back to what it loves doing: mowing. 5 Replacing the battery WARNING: Power off before attempting any adjustment, replacement or repair. Before replacing the blades, turn your EyePilot OFF and put on protective gloves. If you need to replace the battery, follow these steps:

1. Gently turn your EyePilot upside down. 2. Remove the screws on the battery cover. Remove the battery cover. 3. Remove the screws on the sheet metal. Remove the sheet metal. 4. Unplug the connector, replace the old battery with the new one, then reinsert the connectors. 5. Refit the sheet metal. Place the cover back in its position and tighten the screws. 19 EN Troubleshooting If your EyePilot does not work correctly, follow the trouble shooting guide below. If the fault persists, contact your dealer. LED EE F 1 F 2 Error Name Try the possible solutions:

Unknown error Rain Delay 1. Restart the mower to clear the error. 2. If error still exists, please contact your dealer for more diagnosis. 1. To let the mower work, turn off the rain delay in app. 2. Rain delay will be turned off automatically after a certain time (default time is 3hrs, it is changeable via app). Low battery Charge the mower to the proper state. E 01 Outside boundary E 02 Wheels motor error 20 EN E 03 Blade motor blocked E 04 E 05 E 06 E 07 E 08 E 09 E 10 Trapped Lifted Upside down Battery charging error Docking overtime Map error HBI ERROR 1. Move the lawn mower to a mowing area, then press "START" + "OK". 2. If this error frequently occurs in the same location, likely a map issue,and it may require map edit. 1. Check if the drive wheel is stuck by objects and clean the drive wheel.then press "START" +

"OK". 2. Confirm if the mower is stuck in a hole; if so, fill the hole.then press "START" + "OK". 1. Check if the cutting deck is stuck by objects or if the grass is too dense or high. 2. Clean the cutting deck or maintain the grass to a normal cutting height. Clear the obstacles around the machine, or move it to a mowing area, then press "START" + "OK" on the mower. Move the lawn mower to a mowing area, then press "START" + "OK" on the mower. Move the lawn mower to a mowing area, then press "START" + "OK" on the mower. Please check the connection status between the mower and the charging station, try reconnecting it manually, and then wait it to charge. 1. Restart the mower and press "HOME" + "OK" to dock again. 2. Restart the mower and dock the mower into the charging station manually. 1. Restart the mower. 2. Enter "My Maps", find the correct map, reactivate the map in the app. 3. If there are multiple maps, try to activate another map in the app. Restart the lawn mower and press "START" +

"OK" on the mower. E 11 Battery temperature out of range E 12 Camera blocked E 13 E 14 E 15 E 16 E 17 E 18 E 20 E 22 Camera error Insufficient light Blade height adjustment blocked Transit fail Steering motor error Front motor error Unsupport blade height Mower not in station E 23 Charging station docking error E 26 Firmware upgrade error Lock Anti-theft lock Wait the battery temperature to return to normal, then try restarting the mower by pressing

"START" + "OK". Remove any objects blocking the camera, such as snails or leaves. Tip: Gently clean the lens with a soft, dry cloth. For tougher dirt, use a slightly damp cloth and wipe carefully. 1. Check the camera connection cable. 2. Press "START" +"OK" on the mower. 3. If the issue persists, restart the mower. 1. Take the mower to a well-lit area and press

"START" +"OK". 2. If the light is insufficient, take the mower to the charging station and try again later. 1. Check if the mower's height adjustment kit is stuck by grass clippings or other objects. 2. Clean it, then restart by pressing "START" +

"OK"on the mower. 1. Clear the obstacles on the path way. 2. Path way is too narrow, need map change. Restart the mower and try again. If error still exists, please contact your dealer for further diagnosis. Restart the mower and try again. If error still exists, please contact your dealer for further diagnosis. Check the cutting height setting to see if it is within the mower height range. 1. Mower needs to in the charging station before you start mapping process. 2. Dock the mower into the charging station manually. 1. Ensure the charging station is powered on and check that the green light indicator is on. 2. Check that the mower connects the charging station contacts properly. 3. Clean the charging contacts on both the mower and the charging station, and remove any dirt or oxidation. 4. Manually disconnect the machine from the charging station, then reconnect it. If the machine status is "charging," please wait for charging. 5. Ensure the charge station QR is not worn out. 1. Make sure the network connection is working well. 2. Restart the mower, try upgrading again. 3. If the error still exists, try another firmware pack. 1. Put the mower back to working area. 2. Use app to unlock the mower. 21 EN E27 E28 E29 E30 E34 E35 E48 headlight error Mapping failed Mapping trapped Boundary detection failed 1. Make sure the connector is well plugged. 2. Contact dealer to replace the headlight. Remotely control the mower to an open working area with good RTK signal. Press "START" on the mower to clear the error. Check if the mower is stuck. Remove any obstacles. Press "START" on the mower to clear the error. Press "START" on the mower to clear the error. Switch to manual mode to continue mapping or remotely control the mower to a your lawn boundary and start auto mapping. RTK module error Contact dealer to replace the RTK module. Edge blade motor error Mower stuck 1. Check if the cutting deck is stuck by objects or if the grass is too dense or high. 2. Clean the cutting deck or maintain the grass to a normal cutting height. 1. Check if the mower is stuck by dense grass. 2. Restart the mower and press "START" +"OK". Low Power Mode (UEC Mode) Description:

UEC (Ultra Energy Conservation) Mode is a low power mode in which all non-essential modules are turned off. A 2 mm hole is reserved below the charging contacts on the charging station for enabling or disabling this mode. Use a pointed tool to press or release the internal switch through this hole to enter or exit Low Power Mode. 22 EN How to Enable UEC Mode:

Insert a pointed tool into the 2 mm hole located below the charging contacts on the charging station. Gently press the internal switch until it pops up. This will activate UEC Mode, turning off all non-essential modules to minimize power consumption. Charging Behavior in UEC Mode:

When UEC Mode is enabled and the charging cable is connected, all power-consuming components will be turned off except for the power board, battery pack, and charger to conserve energy. Exiting UEC Mode During Charging:

To exit UEC Mode, use the same pointed tool to press the internal switch inside the hole again. Once the switch is pressed down, the system will return to normal operation and all modules will be powered on. Positec USA, Inc. Charlotte, NC 28216 USA www.kress-robotik.com ARXXXXXXXX

Owner's Manual EN FR ES EyePilot EyePilot EyePilot EN FR ES Owner's Manual Manuel utilisateur Instrucciones de usuario KR274 P04 P23 P42 Mower SN Code En FR To match the app account with the mower, please scan the SN code. Pour associer le compte de lapplication la tondeuse, veuillez scanner le code SN. ES Para vincular la cuenta de la aplicacin con la cortadora de csped, escanee el cdigo SN. WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

Lead from lead-based paints;

Crystalline silica from bricks and cement and other masonry products;

Arsenic and chromium from chemically-

treated lumber. 4 EN Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. WARNING: This product can expose you to chemicals including lead and Di(2-

ethylhexyl)phthalate (DEHP) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings. ca.gov. WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Carefully read the instructions for the safe operation of the machine. Save all warnings and instructions for future reference.

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance. WARNING: For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance. IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE Safe operation practices Training a) Read the instructions carefully. Make sure you understand the instructions and be familiar with the controls and the proper use of the appliance. b) Never allow people unfamiliar with these instructions or children to use the appliance. Local regulations can restrict the age of the operator. c) The operator or user is responsible for accidents or hazards occurring to other people or their property. Preparation a) Confirm that the virtual boundary is established as instructed and the virtual boundary is regularly maintained. Before each working cycle, the machine goes around the working area to check whether the virtual boundary exists, if it does not exist, the machine will shut down. The virtual boundary specifies the work area where the machine is allowed to operate. The RTK antena in the machine senses when it is approaching the virtual boundary. When the machine hits an obstacle or approaches the virtual boundary the product selects a new direction. b) Periodically inspect the area where the appliance is to be used and remove all stones, sticks, wires, bones, and other foreign objects. c) Periodically visually inspect to see that the blades, blade bolts and cutter assembly are not worn or damaged. Replace worn or damaged blades and bolts in sets to preserve balance. d) On multi-spindle appliances, take care as rotating one blade can cause other blades to rotate. e) WARNING! The lawnmower shall not be operated without the guard in place. Operation 1. General a) Never operate the appliance with defective guards, or without safety devices, for example deflectors, in place. b) Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times. rotating blades. Never place your hands or feet close to or under the body when robotic lawnmower is in operation. m)To avoid using the machine and its peripherals in bad weather conditions especially when there is a risk of lightning. n) Not to touch moving hazardous parts before these have come to a complete stop. o) For machines used in public areas, that warning signs shall be placed around the working area of the machine. They shall show the substance of the following text:

Warning! Automatic lawnmower! Keep away from the machine! Supervise children!

2. Additionally when the appliance is operating automatically a) Do not leave the machine to operate unattended if you know that there are pets, children or people in the vicinity. b) Please set the smart phone to automatically lock the screen after 30 s to prevent the app from being misused by others. c) Never pick up or carry an appliance while the Maintenance and storage motor is running. d) Operate the disabling device from the appliance

- Before clearing a blockage;

- Before checking, cleaning or working on the appliance. e) It is not permitted to modify the original design of robotic lawnmower. All modifications are made at your own risk. f) Start robotic lawnmower according to the instructions. When the power is on, make sure you keep your hands and feet away from the rotating blades. Never put your hands and feet under the mower. g) Never lift up robotic lawnmower or carry it when the power is on. h) Do not let persons who do not know how robotic lawnmower works and behaves use the mower. i) Do not put anything on top of robotic lawnmower or its charging station. j) Do not allow robotic lawnmower to be used with a defective blade disc or body. Neither should it be used with defective blades, screws, nuts or cables. k) Always switch off robotic lawnmower when you do not intend to use the mower. Robotic lawnmower can only start when the power is on and the correct PIN code has been entered. l) Keep your hands and feet away from the 5 EN WARNING! When the mower is turned upside down the power must always be off. The power should be off during all work on the mowers underframe, such as cleaning or replacing the blades. a) Keep all nuts, bolts and screws tight to be sure the appliance is in safe working condition. b) Inspect the robotic lawnmower each week and replace worn or damaged parts for safety. c) Check especially that the blades and blade disc are not damaged. Replace all blades and screws at the same time if necessary so that the rotating parts are balanced. d) Ensure that only replacement cutting means of the right type are used. e) Ensure that batteries are charged using the correct charger recommended by the manufacturer. Incorrect use may result in electric shock, overheating or leakage of corrosive liquid from the battery. f) In the event of leakage of electrolyte flush with water/neutralizing agent, seek medical help if it comes into contact with the eyes etc. g) Servicing of the appliance should be according to manufacturers instructions. Recommendation To connect the machine and/or its peripherals only to a supply circuit protected by a residual current device (RCD) with a tripping current of not more than 30 mA. Residual risks To avoid injuries, wear protective gloves when replacing the blades. Transport The original packaging should be used when transporting robotic lawnmower over long distances. To safely move form or within the working area:

a) Press the STOP button to stop the mower. You select the four-digit PIN code when you start the mower for the first time. b) Always switch off robotic lawnmower if you intend to carry the mower. c) Carry the mower by the handle at the front of the mower. Carry the mower with the blade disc away from the body. Safety Warnings for battery pack inside the tool a) Do not dismantle, open or shred battery pack. b) Do not expose battery pack to heat or fire. Avoid storage in direct sunlight. c) Do not short-circuit a battery pack. Do not store battery packs haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by other metal objects. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or fire. d) Do not subject battery pack to mechanical shock. e) In the event of battery leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice. f) Do not use any battery pack which is not designed for use with the equipment. g) Keep battery pack out of the reach of children. h) Always purchase the battery pack recommended by the device manufacturer for the equipment. i) Keep battery pack clean and dry. j) Wipe the charging terminals with a clean dry cloth if they become dirty. k) Battery pack need to be charged before use. Always use the correct charger and refer to the manufacturers instructions or equipment manual for proper charging instructions. l) Do not leave battery pack on prolonged charge when not in use. m)Recharge only with the charger specified by Kress. Do not use any charger other than that specifically provided for use with the equipment. n) Retain the original product literature for future reference. o) Use only the battery pack in the application for which it was intended. p) Dispose of properly. q) Do not mix cells of different manufacture, capacity, size or type within a device. r) Keep the battery away from microwaves and high pressure. User manual requirements for wireless product a) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. b) Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. c) This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. d) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not 6 EN installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/

TV technician for help. For mobile device a) To satisfy FCC &ISED RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. b) To ensure compliance, operations at closer than this distance is not recommended. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Region Selection (for Wi-Fi 2.4G device) Limited by local law regulations, version for North America does not have region selection option. 7 EN Symbols WARNING robotic lawnmower can be dangerous if incorrectly used. Read through the Operators manual carefully and understand the content before using your robotic lawnmower. WARNING - Keep a safe distance from the machine when operating. WARNING Operate the disabling device before working on or lifting the machine. WARNING Do not ride on the machine. Class III appliance Li-Ion battery, battery must be recycled. Do not burn. 8 EN Batteries may enter water cycle if disposed improperly, which can be hazardous for ecosystem. Do not dispose of waste batteries as unsorted municipal waste. Do not wash the machine with a high pressure washer Prohibit disassembling the machine without authorization. To reduce the risk of injury, user must read instruction manual POSITEC Inc. has established a partnership with the RBRC Corporation to recycle any Positec batteries with the RBRC-call2recycle seal. For environmental protection, please do not discard batteries in the trash. After the batteries' life cycle is ended, then please call 1-800-822-8837 for a free service that will properly dispose of the battery. Component list A D J Owner's Manual B C E F G H I 9 EN This picture is only for reference A B C D E EyePilot robotic lawn mower Charging pile Charging base Power adapter Wheel brushes F G H I J Charging base fixing nails Spare blades Hex key Screws for fixing blades Manuals Not all the accessories illustrated or described are included in standard delivery. Getting to know EyePilot STOP button Touch button RTK module Rain sensor Front camera Fender A Drive wheel Front wheel 10 EN Charging contact Head light Edge blade knob 1 2 3 2.55 in (65 mm) 2.95 in (75 mm) 3.35 in (85 mm) Physical bumper (handle) Cutting disc Edge blade disc B Battery compartment This picture is only for reference Getting to know power supply 11 EN Icon Type Function Description Green Red Off Blue Green Off Solid: Charging function normal Breathing: Charging in progress Solid: Charging function fault Flashing: Battery polarity short-circuit fault No power supply to the station. Solid: Wi-Fi not connected, please make sure the charging station is within Wi-Fi coverage Solid: Wireless module operating normally Wireless module not powered Parts and functions STOP button 4G indicator light Wi-Fi indicator light Bluetooth indicator light RTK indicator light Battery indicator light Display area Combination key (START and Combination key (HOME and

) Confirm Power on/off Control Power on Power off 12 EN Press power button for 5s Press power button for 5s Enter applink mode Press "START" for 3s Start mowing Stop mowing Return home Press "START" and then "OK"

Press "STOP"

Press "HOME" and then "OK"

How to restart the mower Power off and power on, press "START" and then "OK"

How to change pin code Press "START" and "HOME" together for 5s, use START or HOME to choose new PIN, press "OK" to confirm How to unlock the display Enter PIN code by "START" or "HOME", press "OK" to confirm How to check firmware version number Press "HOME" for 5s Technical data Type KR274 (100-299 - designation of machinery, representative of Robotic Lawnmower) Rated voltage No load speed Cutting area Cutting diameter Cutting height Cutting height positions Zero trim (edge cut blade) Edge cut height Edge cut width Camera Battery type Battery model Charging time approx. Charger model Charger rating Machinery weight Protection degree App Frequency bands for Bluetooth Maximum output power for bluetooth Frequency bands for Wi-Fi Maximum output power for Wi-Fi Maximum slope within the work surface KR274 20 V Max.*

2600 /min 1 acre (4000 m2) 9.4 in (24 cm) 1.57-3.54 in (40-90 mm) 11 Y 1: / 2: / 3:

2.55 in (65 mm) / 2.95 in (75 mm) / 3.35 in (85 mm) 4.33 in (110 mm) Stereo Lithium-ion KA3006 60 min KA3725 Input: 120 V~60 Hz, 190 W, Output: 28 V, 5.0 A 26.7 lbs (12.1 kg) III Y 2400-2483.5 MHz 8 dBm 2412-2462 MHz 30 dBm 21.8 (40%)**

13 EN Charging temperature range 32 F ~ 131 F (0 C ~ 55 C)

* Voltage measured at no load. Initial battery voltage reaches maximum of 20 volts. Nominal voltage is 18 volts.

** Under flat slope test conditions in the Positec laboratory. Technical Data For 4G Band GSM900(B8) DCS1800(B3) WCDMA B1 WCDMA B8 WCDMA Band V LTE-FDD B1 LTE-FDD B3 LTE-FDD B7 LTE-FDD B8 LTE-FDD B20 LTE-FDD B28 LTE-TDD B38 LTE-TDD B40 LTE Band 3 LTE Band 41 14 EN Tx(Mhz) 880-915 1710-1785 1920-1980 880-915 824-849 1920-1980 1710-1785 2500-2570 880-915 832-862 703-748 2570-2620 2300-2400 1710-1785 2535-2675 Rx(Mhz) 925-960 1805-1880 2110-2170 925-960 869-894 2110-2170 1805-1880 2620-2690 925-960 791-821 758-803 2570-2620 2300-2400 1805-1880 2535-2675 RF Output Power (Max) 33dBm 30dBm 24dBm 24dBm 24dBm 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm Technical data for 4G-GNSS Global Navigation SatelliteSystem (GNSS) GPS / GLONASS / BDS / Galileo / SBAS Nominal Frequency Accessories Screw for fixing blades Charging base Charging base fixing nails Hex key Blade 1559-1610 MHz 1215-1300 MHz 1164-1215 MHz KR274 13 1 8 1 13 Wheel brushes (1 pair) Battery pack (KA3006) Charger (KA3725) 1 1 1 We recommend that you purchase genuine accessories listed in the above list from the same store that sold you the tool. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice. Intended Use The garden product is intended for domestic lawn mowing. It is designed to mow often, maintaining a healthier and better looking lawn than ever before. Depending on the size of your lawn, EyePilot may be programmed to operate at any time or frequency. It is not intended for digging, sweeping or snow cleaning. Maintenance Your EyePilot works hard and needs to be cleaned and checked from time to time. Some parts will require replacement as they become worn. Never use your EyePilot with defective on/off switch. Switch off the machine before carrying out any service or maintenance. Here's how to take care of your EyePilot. 15 EN 1 Keep it Sharp WARNING: Before cleaning, adjusting, or replacing the blades, turn your EyePilot OFF and put on protective gloves. WARNING: When fitting new blades, make sure you replace ALL the blades. Always use new screws when fitting blades. This is important to ensure blade retention and balance the blade turning disc. Failure to use new screws could cause serious injury. The EyePilot does not cut grass like other mowers. Its cutting blades are razor sharp on 2 edges and rotate in both directions for maximum cutting capacity. Redesigned blade profile better prevents grass clippings from getting caught in the gap between the disc and the blade. And with new material, the service life of each cutting blade will be longer than that of other brands when it is programmed to mow every day. Always check to see if the blades are chipped or damaged and replace them if they are. When the cutting blades are dull and worn out, they should be replaced with the spare blades provided with your EyePilot. Spare blades are also available at your nearest Kress retailer. 1 2 A. Replace the blades 16 EN Usually your EyePilot's blades need to be checked every two weeks and replaced every month, you can adjust the frequency of replacing the blade according to the cutting quality of the lawn. When replacing the blades, make sure to replace all of them at the same time. You can replace them with one of the spare blade kits and extra blade screws supplied with your EyePilot. Before attempting to replace your EyePilots blades, turn the power off and put on protective gloves and follow these steps:

1. Gently flip the EyePilot over. 2. Remove the battery cover and remove the battery. 3. Take the screws off the blades with a screwdriver. 4. Firmly screw on the new blades. 5. Refit the battery and the battery cover. Important: After screwing the blade to the blade disc, make sure the blade is able to spin freely. 2 Keep it Clean WARNING: Before cleaning, turn your EyePilot OFF. Put on protective gloves before cleaning the blade turning disc and do not rinse or flush with water. WARNING! YOUR EyePilot can only be washed by using a hose! DO NOT use high pressure washer on your EyePilot. High pressure water can go inside the sealings and damage electronic and mechanical parts. A. Cleaning the body Your EyePilot will live a much happier and longer life if it is cleaned regularly. Since your EyePilot is an electric machine, you will need to take care when cleaning. Hose water clean is supported. It is best to use a spray bottle filled with water. When cleaning the machine body, use a soft brush or clean cloth and avoid using solvents or polishes. Lastly, remove all build up of grass clippings and debris. 17 EN B. Cleaning the underside Again, it is important that you power the EyePilot OFF and wear protective gloves before touching the blade turning disc. First, flip your EyePilot upside down to expose its underside. Here you will see the blade disc, the chassis, and the front wheel and driving wheels. Clean everything thoroughly with a soft brush or moist rag. Hose water clean is supported. Rotate the blade disc to ensure it rotates freely. Check the blades spin freely around the fixing screws. Remove any obstructions. IMPORTANT: Remove any stuck debris so that it does not cause a crack in the blade disc. Even the tiniest crack can decrease your EyePilot's mowing output. C. Clean the contact pins and the charging strips Clean the contact pins located on the charging base and the charging strips located on the EyePilot using a cloth. Remove any built up grass clippings or debris around the contact pins and charge strips periodically to ensure the EyePilot successfully charges each time. D. Clean the camera We recommend that users regularly wipe the camera with a rag. 3 Battery life The heart of the EyePilot is its 20V Li-Ion Battery. For proper storage of the battery, make sure it is fully charged and kept in a cool dry place between -4 F ~ 140 F (-20oC~+60oC). NOTE: The recommend EyePilot operation temperature is between 0-55oC. The life-span of the EyePilots battery depends on various factors, such as:

The length of the mowing season in your region Amount of hours the EyePilot mows per day Battery maintenance during storage EyePilot can be charged manually. 1. Connect the charging base to a suitable power supply. The green light on the charging base will turn on. 2. Manually dock the EyePilot into the charging base while the EyePilot is powered off. 3. The green light on the charging base will be flashing and EyePilot will begin to charge. 18 EN 4 Winter hibernation Your EyePilot will live longer and healthier if it is allowed to hibernate. So even though it is tough, we recommend storing your EyePilot in your shed or garage during the winter. Before you prepare your EyePilot for winter hibernation, we recommend you:

Thoroughly clean your EyePilot Fully charge the battery Turn the power off To maximize the battery life, fully charge the battery before storage during winter. WARNING: Protect the underside of EyePilot from water. NEVER store EyePilot upside down outdoors. NOTE: When bringing the EyePilot back to work after winter hibernation, make sure the charging strips and contact pins are clean. We recommend using a fine grade emery cloth to clean the contacts. Using the app, make sure the date and time are correct and send EyePilot back to what it loves doing: mowing. 5 Replacing the battery WARNING: Power off before attempting any adjustment, replacement or repair. Before replacing the blades, turn your EyePilot OFF and put on protective gloves. If you need to replace the battery, follow these steps:

1. Gently turn your EyePilot upside down. 2. Remove the screws on the battery cover. Remove the battery cover. 3. Remove the screws on the sheet metal. Remove the sheet metal. 4. Unplug the connector, replace the old battery with the new one, then reinsert the connectors. 5. Refit the sheet metal. Place the cover back in its position and tighten the screws. 19 EN Troubleshooting If your EyePilot does not work correctly, follow the trouble shooting guide below. If the fault persists, contact your dealer. LED EE F 1 F 2 Error Name Try the possible solutions:

Unknown error Rain Delay 1. Restart the mower to clear the error. 2. If error still exists, please contact your dealer for more diagnosis. 1. To let the mower work, turn off the rain delay in app. 2. Rain delay will be turned off automatically after a certain time (default time is 3hrs, it is changeable via app). Low battery Charge the mower to the proper state. E 01 Outside boundary E 02 Wheels motor error 20 EN E 03 Blade motor blocked E 04 E 05 E 06 E 07 E 08 E 09 E 10 Trapped Lifted Upside down Battery charging error Docking overtime Map error HBI ERROR 1. Move the lawn mower to a mowing area, then press "START" + "OK". 2. If this error frequently occurs in the same location, likely a map issue,and it may require map edit. 1. Check if the drive wheel is stuck by objects and clean the drive wheel.then press "START" +

"OK". 2. Confirm if the mower is stuck in a hole; if so, fill the hole.then press "START" + "OK". 1. Check if the cutting deck is stuck by objects or if the grass is too dense or high. 2. Clean the cutting deck or maintain the grass to a normal cutting height. Clear the obstacles around the machine, or move it to a mowing area, then press "START" + "OK" on the mower. Move the lawn mower to a mowing area, then press "START" + "OK" on the mower. Move the lawn mower to a mowing area, then press "START" + "OK" on the mower. Please check the connection status between the mower and the charging station, try reconnecting it manually, and then wait it to charge. 1. Restart the mower and press "HOME" + "OK" to dock again. 2. Restart the mower and dock the mower into the charging station manually. 1. Restart the mower. 2. Enter "My Maps", find the correct map, reactivate the map in the app. 3. If there are multiple maps, try to activate another map in the app. Restart the lawn mower and press "START" +

"OK" on the mower. E 11 Battery temperature out of range E 12 Camera blocked E 13 E 14 E 15 E 16 E 17 E 18 E 20 E 22 Camera error Insufficient light Blade height adjustment blocked Transit fail Steering motor error Front motor error Unsupport blade height Mower not in station E 23 Charging station docking error E 26 Firmware upgrade error Lock Anti-theft lock Wait the battery temperature to return to normal, then try restarting the mower by pressing

"START" + "OK". Remove any objects blocking the camera, such as snails or leaves. Tip: Gently clean the lens with a soft, dry cloth. For tougher dirt, use a slightly damp cloth and wipe carefully. 1. Check the camera connection cable. 2. Press "START" +"OK" on the mower. 3. If the issue persists, restart the mower. 1. Take the mower to a well-lit area and press

"START" +"OK". 2. If the light is insufficient, take the mower to the charging station and try again later. 1. Check if the mower's height adjustment kit is stuck by grass clippings or other objects. 2. Clean it, then restart by pressing "START" +

"OK"on the mower. 1. Clear the obstacles on the path way. 2. Path way is too narrow, need map change. Restart the mower and try again. If error still exists, please contact your dealer for further diagnosis. Restart the mower and try again. If error still exists, please contact your dealer for further diagnosis. Check the cutting height setting to see if it is within the mower height range. 1. Mower needs to in the charging station before you start mapping process. 2. Dock the mower into the charging station manually. 1. Ensure the charging station is powered on and check that the green light indicator is on. 2. Check that the mower connects the charging station contacts properly. 3. Clean the charging contacts on both the mower and the charging station, and remove any dirt or oxidation. 4. Manually disconnect the machine from the charging station, then reconnect it. If the machine status is "charging," please wait for charging. 5. Ensure the charge station QR is not worn out. 1. Make sure the network connection is working well. 2. Restart the mower, try upgrading again. 3. If the error still exists, try another firmware pack. 1. Put the mower back to working area. 2. Use app to unlock the mower. 21 EN E27 E28 E29 E30 E34 E35 E48 headlight error Mapping failed Mapping trapped Boundary detection failed 1. Make sure the connector is well plugged. 2. Contact dealer to replace the headlight. Remotely control the mower to an open working area with good RTK signal. Press "START" on the mower to clear the error. Check if the mower is stuck. Remove any obstacles. Press "START" on the mower to clear the error. Press "START" on the mower to clear the error. Switch to manual mode to continue mapping or remotely control the mower to a your lawn boundary and start auto mapping. RTK module error Contact dealer to replace the RTK module. Edge blade motor error Mower stuck 1. Check if the cutting deck is stuck by objects or if the grass is too dense or high. 2. Clean the cutting deck or maintain the grass to a normal cutting height. 1. Check if the mower is stuck by dense grass. 2. Restart the mower and press "START" +"OK". Low Power Mode (UEC Mode) Description:

UEC (Ultra Energy Conservation) Mode is a low power mode in which all non-essential modules are turned off. A 2 mm hole is reserved below the charging contacts on the charging station for enabling or disabling this mode. Use a pointed tool to press or release the internal switch through this hole to enter or exit Low Power Mode. 22 EN How to Enable UEC Mode:

Insert a pointed tool into the 2 mm hole located below the charging contacts on the charging station. Gently press the internal switch until it pops up. This will activate UEC Mode, turning off all non-essential modules to minimize power consumption. Charging Behavior in UEC Mode:

When UEC Mode is enabled and the charging cable is connected, all power-consuming components will be turned off except for the power board, battery pack, and charger to conserve energy. Exiting UEC Mode During Charging:

To exit UEC Mode, use the same pointed tool to press the internal switch inside the hole again. Once the switch is pressed down, the system will return to normal operation and all modules will be powered on. Positec USA, Inc. Charlotte, NC 28216 USA www.kress-robotik.com ARXXXXXXXX

Owner's Manual EN FR ES EyePilot EyePilot EyePilot EN FR ES Owner's Manual Manuel utilisateur Instrucciones de usuario KR276 P04 P23 P42 Mower SN Code En FR To match the app account with the mower, please scan the SN code. Pour associer le compte de lapplication la tondeuse, veuillez scanner le code SN. ES Para vincular la cuenta de la aplicacin con la cortadora de csped, escanee el cdigo SN. WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

Lead from lead-based paints;

Crystalline silica from bricks and cement and other masonry products;

Arsenic and chromium from chemically-

treated lumber. 4 EN Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. WARNING: This product can expose you to chemicals including lead and Di(2-

ethylhexyl)phthalate (DEHP) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings. ca.gov. WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Carefully read the instructions for the safe operation of the machine. Save all warnings and instructions for future reference.

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance. WARNING: For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance. IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE Safe operation practices Training a) Read the instructions carefully. Make sure you understand the instructions and be familiar with the controls and the proper use of the appliance. b) Never allow people unfamiliar with these instructions or children to use the appliance. Local regulations can restrict the age of the operator. c) The operator or user is responsible for accidents or hazards occurring to other people or their property. Preparation a) Confirm that the virtual boundary is established as instructed and the virtual boundary is regularly maintained. Before each working cycle, the machine goes around the working area to check whether the virtual boundary exists, if it does not exist, the machine will shut down. The virtual boundary specifies the work area where the machine is allowed to operate. The RTK antena in the machine senses when it is approaching the virtual boundary. When the machine hits an obstacle or approaches the virtual boundary the product selects a new direction. b) Periodically inspect the area where the appliance is to be used and remove all stones, sticks, wires, bones, and other foreign objects. c) Periodically visually inspect to see that the blades, blade bolts and cutter assembly are not worn or damaged. Replace worn or damaged blades and bolts in sets to preserve balance. d) On multi-spindle appliances, take care as rotating one blade can cause other blades to rotate. e) WARNING! The lawnmower shall not be operated without the guard in place. Operation 1. General a) Never operate the appliance with defective guards, or without safety devices, for example deflectors, in place. b) Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times. rotating blades. Never place your hands or feet close to or under the body when robotic lawnmower is in operation. m)To avoid using the machine and its peripherals in bad weather conditions especially when there is a risk of lightning. n) Not to touch moving hazardous parts before these have come to a complete stop. o) For machines used in public areas, that warning signs shall be placed around the working area of the machine. They shall show the substance of the following text:

Warning! Automatic lawnmower! Keep away from the machine! Supervise children!

2. Additionally when the appliance is operating automatically a) Do not leave the machine to operate unattended if you know that there are pets, children or people in the vicinity. b) Please set the smart phone to automatically lock the screen after 30 s to prevent the app from being misused by others. c) Never pick up or carry an appliance while the Maintenance and storage motor is running. d) Operate the disabling device from the appliance

- Before clearing a blockage;

- Before checking, cleaning or working on the appliance. e) It is not permitted to modify the original design of robotic lawnmower. All modifications are made at your own risk. f) Start robotic lawnmower according to the instructions. When the power is on, make sure you keep your hands and feet away from the rotating blades. Never put your hands and feet under the mower. g) Never lift up robotic lawnmower or carry it when the power is on. h) Do not let persons who do not know how robotic lawnmower works and behaves use the mower. i) Do not put anything on top of robotic lawnmower or its charging station. j) Do not allow robotic lawnmower to be used with a defective blade disc or body. Neither should it be used with defective blades, screws, nuts or cables. k) Always switch off robotic lawnmower when you do not intend to use the mower. Robotic lawnmower can only start when the power is on and the correct PIN code has been entered. l) Keep your hands and feet away from the 5 EN WARNING! When the mower is turned upside down the power must always be off. The power should be off during all work on the mowers underframe, such as cleaning or replacing the blades. a) Keep all nuts, bolts and screws tight to be sure the appliance is in safe working condition. b) Inspect the robotic lawnmower each week and replace worn or damaged parts for safety. c) Check especially that the blades and blade disc are not damaged. Replace all blades and screws at the same time if necessary so that the rotating parts are balanced. d) Ensure that only replacement cutting means of the right type are used. e) Ensure that batteries are charged using the correct charger recommended by the manufacturer. Incorrect use may result in electric shock, overheating or leakage of corrosive liquid from the battery. f) In the event of leakage of electrolyte flush with water/neutralizing agent, seek medical help if it comes into contact with the eyes etc. g) Servicing of the appliance should be according to manufacturers instructions. Recommendation To connect the machine and/or its peripherals only to a supply circuit protected by a residual current device (RCD) with a tripping current of not more than 30 mA. Residual risks To avoid injuries, wear protective gloves when replacing the blades. Transport The original packaging should be used when transporting robotic lawnmower over long distances. To safely move form or within the working area:

a) Press the STOP button to stop the mower. You select the four-digit PIN code when you start the mower for the first time. b) Always switch off robotic lawnmower if you intend to carry the mower. c) Carry the mower by the handle at the front of the mower. Carry the mower with the blade disc away from the body. Safety Warnings for battery pack inside the tool a) Do not dismantle, open or shred battery pack. b) Do not expose battery pack to heat or fire. Avoid storage in direct sunlight. c) Do not short-circuit a battery pack. Do not store battery packs haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by other metal objects. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or fire. d) Do not subject battery pack to mechanical shock. e) In the event of battery leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice. f) Do not use any battery pack which is not designed for use with the equipment. g) Keep battery pack out of the reach of children. h) Always purchase the battery pack recommended by the device manufacturer for the equipment. i) Keep battery pack clean and dry. j) Wipe the charging terminals with a clean dry cloth if they become dirty. k) Battery pack need to be charged before use. Always use the correct charger and refer to the manufacturers instructions or equipment manual for proper charging instructions. l) Do not leave battery pack on prolonged charge when not in use. m)Recharge only with the charger specified by Kress. Do not use any charger other than that specifically provided for use with the equipment. n) Retain the original product literature for future reference. o) Use only the battery pack in the application for which it was intended. p) Dispose of properly. q) Do not mix cells of different manufacture, capacity, size or type within a device. r) Keep the battery away from microwaves and high pressure. User manual requirements for wireless product a) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. b) Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. c) This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. d) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not 6 EN installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/

TV technician for help. For mobile device a) To satisfy FCC &ISED RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. b) To ensure compliance, operations at closer than this distance is not recommended. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Region Selection (for Wi-Fi 2.4G device) Limited by local law regulations, version for North America does not have region selection option. 7 EN Symbols WARNING robotic lawnmower can be dangerous if incorrectly used. Read through the Operators manual carefully and understand the content before using your robotic lawnmower. WARNING - Keep a safe distance from the machine when operating. WARNING Operate the disabling device before working on or lifting the machine. WARNING Do not ride on the machine. Class III appliance Li-Ion battery, battery must be recycled. Do not burn. 8 EN Batteries may enter water cycle if disposed improperly, which can be hazardous for ecosystem. Do not dispose of waste batteries as unsorted municipal waste. Do not wash the machine with a high pressure washer Prohibit disassembling the machine without authorization. To reduce the risk of injury, user must read instruction manual POSITEC Inc. has established a partnership with the RBRC Corporation to recycle any Positec batteries with the RBRC-call2recycle seal. For environmental protection, please do not discard batteries in the trash. After the batteries' life cycle is ended, then please call 1-800-822-8837 for a free service that will properly dispose of the battery. Component list A D J Owner's Manual B C E F G H I 9 EN This picture is only for reference A B C D E EyePilot robotic lawn mower Charging pile Charging base Power adapter Wheel brushes F G H I J Charging base fixing nails Spare blades Hex key Screws for fixing blades Manuals Not all the accessories illustrated or described are included in standard delivery. Getting to know EyePilot STOP button Touch button RTK module Rain sensor Front camera Fender A Drive wheel Front wheel 10 EN Charging contact Head light Edge blade knob 1 2 3 2.55 in (65 mm) 2.95 in (75 mm) 3.35 in (85 mm) Physical bumper (handle) Cutting disc Edge blade disc B Battery compartment This picture is only for reference Getting to know power supply 11 EN Icon Type Function Description Green Red Off Blue Green Off Solid: Charging function normal Breathing: Charging in progress Solid: Charging function fault Flashing: Battery polarity short-circuit fault No power supply to the station. Solid: Wi-Fi not connected, please make sure the charging station is within Wi-Fi coverage Solid: Wireless module operating normally Wireless module not powered Parts and functions STOP button 4G indicator light Wi-Fi indicator light Bluetooth indicator light RTK indicator light Battery indicator light Display area Combination key (START and Combination key (HOME and

) Confirm Power on/off Control Power on Power off 12 EN Press power button for 5s Press power button for 5s Enter applink mode Press "START" for 3s Start mowing Stop mowing Return home Press "START" and then "OK"

Press "STOP"

Press "HOME" and then "OK"

How to restart the mower Power off and power on, press "START" and then "OK"

How to change pin code Press "START" and "HOME" together for 5s, use START or HOME to choose new PIN, press "OK" to confirm How to unlock the display Enter PIN code by "START" or "HOME", press "OK" to confirm How to check firmware version number Press "HOME" for 5s Technical data Type KR276 (100-299 - designation of machinery, representative of Robotic Lawnmower) Rated voltage No load speed Cutting area Cutting diameter Cutting height Cutting height positions Zero trim (edge cut blade) Edge cut height Edge cut width Camera Battery type Battery model Charging time approx. Charger model Charger rating Machinery weight Protection degree App Frequency bands for Bluetooth Maximum output power for bluetooth Frequency bands for Wi-Fi Maximum output power for Wi-Fi Maximum slope within the work surface KR276 20 V Max.*

2600 /min 1.5 acre (6000 m2) 9.4 in (24 cm) 1.57-3.54 in (40-90 mm) 11 Y 1: / 2: / 3:

2.55 in (65 mm) / 2.95 in (75 mm) / 3.35 in (85 mm) 4.33 in (110 mm) Stereo Lithium-ion KA3010 70 min KA3727 Input: 120 V~60 Hz, 230 W, Output: 28 V, 7.0 A 27.1 lbs (12.3 kg) III Y 2400-2483.5 MHz 8 dBm 2412-2462 MHz 30 dBm 21.8 (40%)**

13 EN Charging temperature range 32 F ~ 131 F (0 C ~ 55 C)

* Voltage measured at no load. Initial battery voltage reaches maximum of 20 volts. Nominal voltage is 18 volts.

** Under flat slope test conditions in the Positec laboratory. Technical Data For 4G Band GSM900(B8) DCS1800(B3) WCDMA B1 WCDMA B8 WCDMA Band V LTE-FDD B1 LTE-FDD B3 LTE-FDD B7 LTE-FDD B8 LTE-FDD B20 LTE-FDD B28 LTE-TDD B38 LTE-TDD B40 LTE Band 3 LTE Band 41 14 EN Tx(Mhz) 880-915 1710-1785 1920-1980 880-915 824-849 1920-1980 1710-1785 2500-2570 880-915 832-862 703-748 2570-2620 2300-2400 1710-1785 2535-2675 Rx(Mhz) 925-960 1805-1880 2110-2170 925-960 869-894 2110-2170 1805-1880 2620-2690 925-960 791-821 758-803 2570-2620 2300-2400 1805-1880 2535-2675 RF Output Power (Max) 33dBm 30dBm 24dBm 24dBm 24dBm 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm 23dBm Technical data for 4G-GNSS Global Navigation SatelliteSystem (GNSS) GPS / GLONASS / BDS / Galileo / SBAS Nominal Frequency Accessories Screw for fixing blades Charging base Charging base fixing nails Hex key Blade 1559-1610 MHz 1215-1300 MHz 1164-1215 MHz KR276 13 1 8 1 13 Wheel brushes (1 pair) Battery pack (KA3010) Charger (KA3727) 1 1 1 We recommend that you purchase genuine accessories listed in the above list from the same store that sold you the tool. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice. Intended Use The garden product is intended for domestic lawn mowing. It is designed to mow often, maintaining a healthier and better looking lawn than ever before. Depending on the size of your lawn, EyePilot may be programmed to operate at any time or frequency. It is not intended for digging, sweeping or snow cleaning. Maintenance Your EyePilot works hard and needs to be cleaned and checked from time to time. Some parts will require replacement as they become worn. Never use your EyePilot with defective on/off switch. Switch off the machine before carrying out any service or maintenance. Here's how to take care of your EyePilot. 15 EN 1 Keep it Sharp WARNING: Before cleaning, adjusting, or replacing the blades, turn your EyePilot OFF and put on protective gloves. WARNING: When fitting new blades, make sure you replace ALL the blades. Always use new screws when fitting blades. This is important to ensure blade retention and balance the blade turning disc. Failure to use new screws could cause serious injury. The EyePilot does not cut grass like other mowers. Its cutting blades are razor sharp on 2 edges and rotate in both directions for maximum cutting capacity. Redesigned blade profile better prevents grass clippings from getting caught in the gap between the disc and the blade. And with new material, the service life of each cutting blade will be longer than that of other brands when it is programmed to mow every day. Always check to see if the blades are chipped or damaged and replace them if they are. When the cutting blades are dull and worn out, they should be replaced with the spare blades provided with your EyePilot. Spare blades are also available at your nearest Kress retailer. 1 2 A. Replace the blades 16 EN Usually your EyePilot's blades need to be checked every two weeks and replaced every month, you can adjust the frequency of replacing the blade according to the cutting quality of the lawn. When replacing the blades, make sure to replace all of them at the same time. You can replace them with one of the spare blade kits and extra blade screws supplied with your EyePilot. Before attempting to replace your EyePilots blades, turn the power off and put on protective gloves and follow these steps:

1. Gently flip the EyePilot over. 2. Remove the battery cover and remove the battery. 3. Take the screws off the blades with a screwdriver. 4. Firmly screw on the new blades. 5. Refit the battery and the battery cover. Important: After screwing the blade to the blade disc, make sure the blade is able to spin freely. 2 Keep it Clean WARNING: Before cleaning, turn your EyePilot OFF. Put on protective gloves before cleaning the blade turning disc and do not rinse or flush with water. WARNING! YOUR EyePilot can only be washed by using a hose! DO NOT use high pressure washer on your EyePilot. High pressure water can go inside the sealings and damage electronic and mechanical parts. A. Cleaning the body Your EyePilot will live a much happier and longer life if it is cleaned regularly. Since your EyePilot is an electric machine, you will need to take care when cleaning. Hose water clean is supported. It is best to use a spray bottle filled with water. When cleaning the machine body, use a soft brush or clean cloth and avoid using solvents or polishes. Lastly, remove all build up of grass clippings and debris. 17 EN B. Cleaning the underside Again, it is important that you power the EyePilot OFF and wear protective gloves before touching the blade turning disc. First, flip your EyePilot upside down to expose its underside. Here you will see the blade disc, the chassis, and the front wheel and driving wheels. Clean everything thoroughly with a soft brush or moist rag. Hose water clean is supported. Rotate the blade disc to ensure it rotates freely. Check the blades spin freely around the fixing screws. Remove any obstructions. IMPORTANT: Remove any stuck debris so that it does not cause a crack in the blade disc. Even the tiniest crack can decrease your EyePilot's mowing output. C. Clean the contact pins and the charging strips Clean the contact pins located on the charging base and the charging strips located on the EyePilot using a cloth. Remove any built up grass clippings or debris around the contact pins and charge strips periodically to ensure the EyePilot successfully charges each time. D. Clean the camera We recommend that users regularly wipe the camera with a rag. 3 Battery life The heart of the EyePilot is its 20V Li-Ion Battery. For proper storage of the battery, make sure it is fully charged and kept in a cool dry place between -4 F ~ 140 F (-20oC~+60oC). NOTE: The recommend EyePilot operation temperature is between 0-55oC. The life-span of the EyePilots battery depends on various factors, such as:

The length of the mowing season in your region Amount of hours the EyePilot mows per day Battery maintenance during storage EyePilot can be charged manually. 1. Connect the charging base to a suitable power supply. The green light on the charging base will turn on. 2. Manually dock the EyePilot into the charging base while the EyePilot is powered off. 3. The green light on the charging base will be flashing and EyePilot will begin to charge. 18 EN 4 Winter hibernation Your EyePilot will live longer and healthier if it is allowed to hibernate. So even though it is tough, we recommend storing your EyePilot in your shed or garage during the winter. Before you prepare your EyePilot for winter hibernation, we recommend you:

Thoroughly clean your EyePilot Fully charge the battery Turn the power off To maximize the battery life, fully charge the battery before storage during winter. WARNING: Protect the underside of EyePilot from water. NEVER store EyePilot upside down outdoors. NOTE: When bringing the EyePilot back to work after winter hibernation, make sure the charging strips and contact pins are clean. We recommend using a fine grade emery cloth to clean the contacts. Using the app, make sure the date and time are correct and send EyePilot back to what it loves doing: mowing. 5 Replacing the battery WARNING: Power off before attempting any adjustment, replacement or repair. Before replacing the blades, turn your EyePilot OFF and put on protective gloves. If you need to replace the battery, follow these steps:

1. Gently turn your EyePilot upside down. 2. Remove the screws on the battery cover. Remove the battery cover. 3. Remove the screws on the sheet metal. Remove the sheet metal. 4. Unplug the connector, replace the old battery with the new one, then reinsert the connectors. 5. Refit the sheet metal. Place the cover back in its position and tighten the screws. 19 EN Troubleshooting If your EyePilot does not work correctly, follow the trouble shooting guide below. If the fault persists, contact your dealer. LED EE F 1 F 2 Error Name Try the possible solutions:

Unknown error Rain Delay 1. Restart the mower to clear the error. 2. If error still exists, please contact your dealer for more diagnosis. 1. To let the mower work, turn off the rain delay in app. 2. Rain delay will be turned off automatically after a certain time (default time is 3hrs, it is changeable via app). Low battery Charge the mower to the proper state. E 01 Outside boundary E 02 Wheels motor error 20 EN E 03 Blade motor blocked E 04 E 05 E 06 E 07 E 08 E 09 E 10 Trapped Lifted Upside down Battery charging error Docking overtime Map error HBI ERROR 1. Move the lawn mower to a mowing area, then press "START" + "OK". 2. If this error frequently occurs in the same location, likely a map issue,and it may require map edit. 1. Check if the drive wheel is stuck by objects and clean the drive wheel.then press "START" +

"OK". 2. Confirm if the mower is stuck in a hole; if so, fill the hole.then press "START" + "OK". 1. Check if the cutting deck is stuck by objects or if the grass is too dense or high. 2. Clean the cutting deck or maintain the grass to a normal cutting height. Clear the obstacles around the machine, or move it to a mowing area, then press "START" + "OK" on the mower. Move the lawn mower to a mowing area, then press "START" + "OK" on the mower. Move the lawn mower to a mowing area, then press "START" + "OK" on the mower. Please check the connection status between the mower and the charging station, try reconnecting it manually, and then wait it to charge. 1. Restart the mower and press "HOME" + "OK" to dock again. 2. Restart the mower and dock the mower into the charging station manually. 1. Restart the mower. 2. Enter "My Maps", find the correct map, reactivate the map in the app. 3. If there are multiple maps, try to activate another map in the app. Restart the lawn mower and press "START" +

"OK" on the mower. E 11 Battery temperature out of range E 12 Camera blocked E 13 E 14 E 15 E 16 E 17 E 18 E 20 E 22 Camera error Insufficient light Blade height adjustment blocked Transit fail Steering motor error Front motor error Unsupport blade height Mower not in station E 23 Charging station docking error E 26 Firmware upgrade error Lock Anti-theft lock Wait the battery temperature to return to normal, then try restarting the mower by pressing

"START" + "OK". Remove any objects blocking the camera, such as snails or leaves. Tip: Gently clean the lens with a soft, dry cloth. For tougher dirt, use a slightly damp cloth and wipe carefully. 1. Check the camera connection cable. 2. Press "START" +"OK" on the mower. 3. If the issue persists, restart the mower. 1. Take the mower to a well-lit area and press

"START" +"OK". 2. If the light is insufficient, take the mower to the charging station and try again later. 1. Check if the mower's height adjustment kit is stuck by grass clippings or other objects. 2. Clean it, then restart by pressing "START" +

"OK"on the mower. 1. Clear the obstacles on the path way. 2. Path way is too narrow, need map change. Restart the mower and try again. If error still exists, please contact your dealer for further diagnosis. Restart the mower and try again. If error still exists, please contact your dealer for further diagnosis. Check the cutting height setting to see if it is within the mower height range. 1. Mower needs to in the charging station before you start mapping process. 2. Dock the mower into the charging station manually. 1. Ensure the charging station is powered on and check that the green light indicator is on. 2. Check that the mower connects the charging station contacts properly. 3. Clean the charging contacts on both the mower and the charging station, and remove any dirt or oxidation. 4. Manually disconnect the machine from the charging station, then reconnect it. If the machine status is "charging," please wait for charging. 5. Ensure the charge station QR is not worn out. 1. Make sure the network connection is working well. 2. Restart the mower, try upgrading again. 3. If the error still exists, try another firmware pack. 1. Put the mower back to working area. 2. Use app to unlock the mower. 21 EN E27 E28 E29 E30 E34 E35 E48 headlight error Mapping failed Mapping trapped Boundary detection failed 1. Make sure the connector is well plugged. 2. Contact dealer to replace the headlight. Remotely control the mower to an open working area with good RTK signal. Press "START" on the mower to clear the error. Check if the mower is stuck. Remove any obstacles. Press "START" on the mower to clear the error. Press "START" on the mower to clear the error. Switch to manual mode to continue mapping or remotely control the mower to a your lawn boundary and start auto mapping. RTK module error Contact dealer to replace the RTK module. Edge blade motor error Mower stuck 1. Check if the cutting deck is stuck by objects or if the grass is too dense or high. 2. Clean the cutting deck or maintain the grass to a normal cutting height. 1. Check if the mower is stuck by dense grass. 2. Restart the mower and press "START" +"OK". Low Power Mode (UEC Mode) Description:

UEC (Ultra Energy Conservation) Mode is a low power mode in which all non-essential modules are turned off. A 2 mm hole is reserved below the charging contacts on the charging station for enabling or disabling this mode. Use a pointed tool to press or release the internal switch through this hole to enter or exit Low Power Mode. 22 EN How to Enable UEC Mode:

Insert a pointed tool into the 2 mm hole located below the charging contacts on the charging station. Gently press the internal switch until it pops up. This will activate UEC Mode, turning off all non-essential modules to minimize power consumption. Charging Behavior in UEC Mode:

When UEC Mode is enabled and the charging cable is connected, all power-consuming components will be turned off except for the power board, battery pack, and charger to conserve energy. Exiting UEC Mode During Charging:

To exit UEC Mode, use the same pointed tool to press the internal switch inside the hole again. Once the switch is pressed down, the system will return to normal operation and all modules will be powered on. Positec USA, Inc. Charlotte, NC 28216 USA www.kress-robotik.com ARXXXXXXXX

Owners manual Landroid Vision Cloud Landroid Vision Cloud Landroid Vision Cloud EN F ES Owners manual Manuel utilisateur Instrucciones de usuario EN F ES P04 P17 P30 WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

Lead from lead-based paints;

Crystalline silica from bricks and cement and other masonry products;

Arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. WARNING: This product can expose you to chemicals including lead and Di(2-ethylhexyl) phthalate (DEHP) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Carefully read the instructions for the safe operation of the machine. Save all warnings and instructions for future reference.

-This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

-Children should be supervised to ensure that they do not play with the appliance. WARNING: For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance. WARNING: To reduce the risk of injury to persons and damage to the machine, do not remove battery pack before switching off the machine. IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE Safe operation practices Training a) Read the instructions carefully. Make sure you understand the instructions and be familiar with the controls and the proper use of the appliance. b) Never allow people unfamiliar with these instructions or children to use the appliance. Local regulations can restrict the age of the operator. c) The operator or user is responsible for accidents or hazards occurring to other people or their property. Preparation a) Ensure the correct installation of the automatic perimeter delineation system as instructed. This machine works without boundary wire or virtual boundary. It can automatically identify the working area and non-working area through the camera. Once the machine is turned on, the camera will automatically turn on and work at the same time. The machine recognizes that the lawn is the working area through the camera, and the non-working area that is not the lawn. When the machine walks to the boundary between lawn and non-lawn, it will automatically turn to return to the working area. Add the Worx mapping accessory strip, or using water tubes to separate it from the neighbors lawn. 4 EN b) Periodically inspect the area where the appliance is to be used and remove all stones, sticks, wires, bones, and other foreign objects. Periodically inspect and clean the boundaries between grass and non-grass. Clearing boundaries helps the lawnmower to identify the working area. c) Periodically visually inspect to see that the blades, blade bolts and cutter assembly are not worn or damaged. Replace worn or damaged blades and bolts in sets to preserve balance. d) On multi-spindle appliances, take care as rotating one blade can cause other blades to rotate. e) WARNING! The lawnmower shall not be operated without the guard in place. Operation 1. General a) Never operate the appliance with defective guards, or without safety devices, for example deflectors, in place. b) Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times. c) Never pick up or carry an appliance while the motor is running. d) Operate the disabling device from the appliance.

- Before clearing a blockage;

- Before checking, cleaning or working on the appliance. e) It is not permitted to modify the original design of robotic lawnmower. All modifications are made at your own risk. f) Start robotic lawnmower according to the instructions. When the power key is switched on, make sure you keep your hands and feet away from the rotating blades. Never put your hands and feet under the mower. g) Never lift up robotic lawnmower or carry it when the power key is switched on. h) Do not let persons who do not know how robotic lawnmower works and behaves use the mower. i) Do not put anything on top of robotic lawnmower or its charging station. j) Do not allow robotic lawnmower to be used with a defective blade disc or body. Neither should it be used with defective blades, screws, nuts or cables. k) Always switch off robotic lawnmower when you do not intend to use the mower. Robotic lawnmower can only start when the power key is switched on and the correct PIN code has been entered. l) Keep your hands and feet away from the rotating blades. Never place your hands or feet close to or under the body when robotic lawnmower is in operation. m) To avoid using the machine and its peripherals in bad weather conditions especially when there is a risk of lightning. n) Do not touch moving hazardous parts before these have come to a complete stop. o) For machines used in public areas, that warning signs shall be placed around the working area of the machine. They shall show the substance of the following text:

Warning! Automatic lawnmower! Keep away from the machine! Supervise children!

2. Additionally when the appliance is operating automatically a) Do not leave the machine to operate unattended if you know that there are pets, children or people in the vicinity. b) Please set the smart phone to automatically lock the screen after 30 s to prevent the app from being misused by others. Maintenance and storage WARNING! When the mower is turned upside down the power key must always be switched 5 EN off. The power key should be switched off during all work on the mowers underframe, such as cleaning or replacing the blades. a) Keep all nuts, bolts and screws tight to be sure the appliance is in safe working condition. b) Inspect the robotic lawnmower each week and replace worn or damaged parts for safety. c) Check especially that the blades and blade disc are not damaged. Replace all blades and screws at the same time if necessary so that the rotating parts are balanced. d) Ensure that only replacement cutting means of the right type are used. e) Ensure that batteries are charged using the correct charger recommended by the manufacturer. Incorrect use may result in electric shock, overheating or leakage of corrosive liquid from the battery. f) In the event of leakage of electrolyte flush with water/neutralizing agent, seek medical help if it comes into contact with the eyes etc. g) Servicing of the appliance should be according to manufacturers instructions. h) In order to obtain the best performance, please pay attention to the following ambient temperature range, do not charge, use, or store in the case of exceeding the following temperature range:

a) Charging temperature range: 0C~40C b) Discharge temperature range: -20C~55C c) Storage temperature range: -20C~75C i) Leaking battery fluid can cause skin and eye irritation or chemical burns. a) Avoid contact with skin and eyes. b) If liquid gets in eyes: Do not rub. Flush open eyes with water for at least 15 minutes, and seek medical advice. c) In case of accidental contact, wash the contact area immediately and thoroughly with mild soap and water. d) Use an inert absorbent such as sand on spilled liquid. Recommendation To connect the machine and/or its peripherals only to a supply circuit protected by a residual current device (RCD) with a tripping current of not more than 30 mA. Residual risks To avoid injuries, wear protective gloves when replacing the blades. Transport The original packaging should be used when transporting robotic lawnmower over long distances. To safely move form or within the working area:

a) Press the STOP button to stop the mower. You select the four-digit PIN code when you start the mower for the first time. b) Always switch off robotic lawnmower if you intend to carry the mower. c) Carry the mower by the handle at the front under the mower. Carry the mower with the blade disc away from the body. Safety Warnings for battery pack a) Do not dismantle, open or shred cells or battery pack. b) Do not expose battery pack to heat or fire. Avoid storage in direct sunlight. c) Do not short-circuit a battery pack. Do not store battery packs haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by other metal objects. When battery pack is not in use, keep it away from other metal objects, like paper 6 EN clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or fire. d) Do not subject battery pack to mechanical shock. e) In the event of battery leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice. f) Do not use any battery pack which is not designed for use with the equipment. g) Keep battery pack out of the reach of children. h) Always purchase the battery pack recommended by the device manufacturer for the equipment. i) Keep battery pack clean and dry. j) Wipe the battery pack terminals with a clean dry cloth if they become dirty. k) Battery pack needs to be charged before use. Always use the correct charger and refer to the manufacturers instructions or equipment manual for proper charging instructions. l) Do not leave battery pack on prolonged charge when not in use. m)After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain maximum performance. n) Recharge only with the charger specified by Worx. Do not use any charger other than that specifically provided for use with the equipment. o) Retain the original product literature for future reference. p) Use only the battery pack in the application for which it was intended. q) Remove the battery pack from the equipment when not in use. r) Dispose of properly. s) Do not mix cells of different manufacture, capacity, size or type within a device. t) Keep the battery away from microwaves and high pressure. User manual requirements for wireless product a) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. b) Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. c) This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. d) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna. 7 EN - Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. For mobile device a) To satisfy FCC &ISED RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation b) To ensure compliance, operations at closer than this distance is not recommended Region Selection (for Wi-Fi 2.4G device) Limited by local law regulations, version for North America does not have region selection option. Network Interface Description The following network interfaces are enabled by default when the device is powered on:

Bluetooth Enables pairing and binding between the device and the mobile app. Supports Wi-Fi configuration via the app. During the map-

ping process, Bluetooth also allows for device control and management. Wi-Fi Connects the device to the home wireless network for data communication with the cloud server. Supports remote monitoring, control, and parameter configuration via the app. Also enables OTA (Over-The-Air) firmware updates to ensure timely software optimization. 4G Cellular Network Provides connectivity to the cloud server in the absence of Wi-Fi, ensuring continuous communication between the device and the app for remote interaction, data synchronization, and control. RadioLink Connects to the compatible charging station to receive high-precision RTK positioning data. Enables centimeter-level positio-

ning accuracy, enhancing navigation stability and operational precision. When using the product, users need to install the battery first, so the FCC ID is accessible when using the product. 8 EN INFORMATION ON THE MOWER WARNING robotic lawnmower can be dangerous if incorrectly used. Read through the Operators manual carefully and understand the content before using your robotic lawnmower. WARNING - Keep a safe distance from the machine when operating. WARNING Activate the disabling device before working on or lifting the machine. WARNING - Do not ride on the machine. Li-Ion battery, battery must be recycled. Do not burn Batteries may enter water cycle if disposed improperly, which can be hazardous for ecosystem. Do not dispose of waste batteries as unsorted municipal waste. Do not disassemble mower. Repairs should be made only by authorized repair personnel. Class III appliance Read operator's manual POSITEC Inc. has established a partnership with the RBRC Corporation to recycle any Positec batteries with the RBRC-call2recycle seal. For environmental protection, please do not discard batteries in the trash. After the batteries' life cycle is ended, then please call 1-800-822-8837 for a free service that will properly dispose of the battery. You can customize your mowers performance with accessories. Visit www.worx.com/lawn-garden/robotic-lawn-mowers.html to learn more about these available accessory options. WHATS IN THE BOX A B C A B C D E F Robotic lawnmower Charging tower Charging base plate Spare blades kits Hex key Screws App APP I J K D E F G H G H I J K Power supply 20V battery No-Go Line Staples Manuals VIDEO MANUAL HELPLINE 9 EN GETTING TO KNOW THE MOWER USB port*

Battery slot RTK module Cut to Zero module 1 2 3 2.6 in. 3.0 in. 3.4 in. Safety stop Interface Battery cover button Camera A Rain sensor

*USB port: Used for exporting log files and performing manual firmware upgrades. Find my Landroid FiatLux B Charge contact The picture is only for reference GETTING TO KNOW POWER SUPPLY Icon Type Function Description Solid: Charging function normal Breathing: Charging in progress Solid: Charging fault Green Red Flashing: Battery polarity short-circuit fault Off No power supply. Green Its working normally. Blue Its working abnormally. Please refer to the Troubleshooting section or contact Customer Service for further assistance. 10 EN

TECHNICAL DATA TECHNICAL DATA FOR 4G Rated voltage No load speed (/min) Cutting area (m2) Cutting diameter (cm) Cutting height (mm) Cutting system Cutting height adjustment method Cut to Zero Cutting height of the Cut to Zero Camera Slope (%) Battery type Battery Capacity (Ah) Battery model Charging time approx. (mins.) Charger model Charger rating WR340 20V Max.*

2400 /min 1 acre (4000 m2) 8.7 in (22 cm) 1.57-1.97-2.36-2.76-3.15-3.54 in (40-50-60-70-80-90 mm) 3 blades Electric Y 123 2.6-3.0-3.4 in (657585 mm) Stereo 30% (17o)**

Lithium-ion 5 Ah WA3675 60 mins. WA3805 Input: 120 V~60 Hz, 190W, Output: 28 V

, 5.0 A Machinery weight (kg) 30.9 lb (14 kg) Protection degree App (Wi-Fi/Bluetooth) III Y Frequency bands for Bluetooth

(MHz) Maximum Transmitted Power for Bluetooth (dBm) 2400-2483.5 MHz 8 dBm Frequency bands for Wi-Fi (MHz) 2412-2462 MHz Maximum Transmitted Power for Wi-Fi (dBm) Waterproof level 30 dBm IPX 6

*Voltage is measured under no-load condition. The initial maximum battery voltage can reach 20 volts, while the nominal voltage is 18 volts.

**If the mower is equipped with the Cut to Zero module, it is not recommended to operate the mower on slopes greater than 15. TECHNICAL DATA FOR 4G-GNSS Global Navigation SatelliteSystem (GNSS) Nominal Frequency GPS / GLONASS / BDS / Galileo / SBAS 1559-1610 MHz 1215-1300 MHz 1164-1215 MHz Band Tx(Mhz) Rx(Mhz) RF Output Power (Max) GSM900(B8) 880-915 925-960 33dBm DCS1800(B3) 1710-1785 1805-1880 30dBm WCDMA B1 1920-1980 2110-2170 24dBm WCDMA B8 880-915 925-960 WCDMA Band V 824-849 869-894 24dBm 24dBm LTE-FDD B1 1920-1980 2110-2170 23dBm LTE-FDD B3 1710-1785 1805-1880 23dBm LTE-FDD B7 2500-2570 2620-2690 23dBm LTE-FDD B8 880-915 925-960 LTE-FDD B20 832-862 791-821 LTE-FDD B28 703-748 758-803 23dBm 23dBm 23dBm LTE-TDD B38 2570-2620 2570-2620 23dBm LTE-TDD B40 2300-2400 2300-2400 23dBm LTE Band 3 1710-1785 1805-1880 23dBm LTE Band 41 2535-2675 2535-2675 23dBm ACCESSORIES Screw Charging tower Charging base plate Hex key Blade No-Go Line Staples Cut to Zero module FiatLux Battery pack (WA3675) Charger (WA3805) WR340 8 1 1 1 8 6 m 10 1 1 1 1 We recommend that you purchase genuine accessories listed in the above list from the same store where you purchased the tool. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice. INTENDED USE The garden product is intended for domestic lawn mowing. It is designed to mow often, maintaining a healthier and better looking lawn than ever before. Depending on the size of your lawn, your mower may be programmed to operate at any time or frequency. It is not intended for digging, sweeping or snow clearing. 11 EN MAINTENANCE Your mower works hard and needs to be cleaned and checked from time to time. This section of our guide helps you keep your mower in good shape so it can last for years without trouble. Heres how to take care of your mower. Switch off the mower before carrying out any service or maintenance. 1. Keep it sharp WARNING! Before cleaning, adjusting, or replacing the blades, turn your mower OFF and remove the battery. Always wear protective gloves. Replacing the Blades (See Fig. 1 - 2) Remove the battery and gently flip the mower over. Take the screws off the blades with a screwdriver. Firmly screw on the new blades. Caution: If the Cut to Zero blade assembly needs to be replaced, follow the same replacement procedure as for the main unit blade. If you need to replace the blade located on the inner side near the protective cover, simply rotate the blade disc to turn the inner blade outward for removal. Always wear protective gloves and take appropriate safety precautions to avoid injury. 1 2 3 3 Attention: When fitting new blades, make sure you replace ALL the blades. Always use new screws when fitting blades. This is important to ensure blade retention and balance the blade turning disc. Failure to use new screws could cause serious injury. Important: After screwing the blade to the blade disc, make sure the blade is able to spin freely. 2. Keep it clean Your mower should be cleaned regularly. This helps keep it in good condition, especially removing dirt, debris and the build-up of grass clippin-

gs from daily mowing. Turn your mower off before cleaning it. For extra safety, remove the battery. Attention: Make sure the battery pack cover is closed when washing your mower. WARNING! YOUR MOWER can only be washed by using a hose! DO NOT use high pressure washer on your mower. High pressure water can go inside the sealings and damage electronic and mechanical parts. 3. Keep it charged The heart of the mower is its 20V Li-Ion Worx PowerShare Battery. A. For the proper storage of the battery, make sure it is fully charged and kept in a cool dry place. B. The recommended mower operation temperature is between 0-55C. C. The life-span of the mowers battery depends on hours of usage and the length of use per day during the mowing season. 12 EN 4. Keep it updated The mower is always improving and new firmware versions are available for free. Always keep the mowers firmware up to date to make the most of your mower. 4.1 Check the current firmware version of the mower in the app:

A. Tap the sidebar icon in the top left corner. B. Select Firmware Update. C. The screen will display Current Version. The small grey text below indicates the firmware version currently installed. 4.2 Update the mowers firmware via the app:

A. Tap the sidebar icon in the top left corner. B. Select Firmware Update. C. Tap Update. The app will send a firmware update request. If the mower is properly connected to Wi-Fi, the update will start. Please wait patiently until the process is complete. 5. Remove the charging station If the charging station requires repair or needs to be stored for a long period, it can be completely removed. My Landroids Landroid S WR103E My Lawn Schedule Activity Log Device Settings Firmware Update Support Units of measure 2 Account About

Firmware Update Update 8 ERROR MESSAGES Sometimes things can go wrong. Fortunately, the mower is smart enough to tell you if it encounters an issue, so you can fix it. If in doubt, please visit our website where you will find useful videos and further support. MESSAGE CAUSE ACTION Error unknown Please restart the mower. Rain delay Low battery The mower is in rain delay state. The mower is low on power. Out of working area Take the mower back to the charging station to charge, then restart it.

-EE-

-F01-

-F02-

-E01-

-E02-

-E03-

-E05-

-E06-

Wheels motor fault Blade motor fault Mower Lifted Mower upside down

-E07-

Battery charge error

-E08-

The mower cannot find charging station Turn off the mower, flip the mower over, and check for anything blocking the wheels; if found, please remove it. Turn off the mower and flip it over. Put on safety gloves to avoid injury and check whether anything is blocking the blade disc. If so, please remove it. Place the mower on level ground, press operation.

, then press to resume normal Battery temperature too low: When the outside temperature is below 0 C, operation is not suitable and the mower will stop charging. Please store the mower indoors. Power supply is broken: please contact Customer Services. The charging station is not installed in an appropriate locationit may be sur-

rounded by obstacles or placed on uneven ground. Please check the installa-

tion site. 13 EN MESSAGE CAUSE ACTION

-E09-

-E11-

-E12-

-E14-

-E16-

Map not detected Please check whether a map has been created for this area. If not, create a map in the app and make sure to click Save to complete the process. Battery temperature is out of range The battery temperature is too high. When the temperature is lowered to 55C, the mower will return to normal work. Camera is covered Insufficient light Please clean the cover on the camera. Verify whether the mowers decorative cover is lifted; if so, reinstall it properly. In the schedule, set the mower to return to the charging station before dusk, or purchase an FiatLux light from a store. The mower failed to transfer between zones. Check whether there are any obstacles in the passage and remove them if present. If the problem persists, recreate the passage in the map. NOTES A. Before turning power on, always check the mower is inside its working area. B. If for any reasoni.e. a party, children playing...you want to park your mower in the charging station: press go to its station and stay there. Please note that the mower will now wait until the next scheduled mowing session. If you want to re-start it at anytime, press C. If an error repeatedly occurs in the same area of your lawn, you might have a problem with the working area so please refer to the installa-

tion instructions and check your set up is correct with its help. D. If your lawn is divided in two separated areas, connected by a corridor less than 1m wide, one of which is not provided with the charging station: when the mower runs out of charge, take it manually to the charging station. E. If the mower runs abnormally once in a while, please reset it by turning it off and removing the battery for 30 seconds, then restart it. If the problem cannot be solved, please contact our Customer Service for help. to start your mower. The mower will then then TROUBLESHOOTING If your mower does not work correctly, follow the troubleshooting guide below. Scan the QR code for more troubleshooting. SYMPTOM CAUSE SOLUTION There are obsacles in front of the charging station. Please remove the obstacles within the 2 m in front of the charging station. The mower can not find the charging station. The QR code is sheltered. Make sure the QR code is clear and that there is nothing directly on it or above it. The charging station has been installed in a shaded area. Please relocate the charging station to a place without tall walls or trees on either side that may cause shade. Incorrectly mapping Please delete and remap the passage. There are obstacles in the passage. Remove the obstacles. The secondary area is not mowed. The mower is not operating at the correct time. The mower shuts off when docking in the charging pile. The clock is not set to the correct time. The previous mowing task was not completed. The mower fails to charge due to over temperature protection and is powered off. Poor connection. The mower fails to connect to the internet. Please check your router has the correct settings. Please check whether the router is disconnected or Wi-Fi SSID is changed. 14 Keep the mower connected to Wi-Fi, then reset the working schedule. The mower will continue the unfinished task. Place the charging station in a shady area or wait until the temperature has cooled down. Check the LED light on the charging pile. Check the connection betwe-

en the contact pins located on the charging pile and the charging strip. Make sure your router is 2.4GHz. If your router has two settings, please enable the 2.4GHz band. Make sure your router is set to 802.11 mode and wireless setting is b/g/n mixed. Make sure your router has the SSID Broadcast function enabled when you connect the mower with the app. You can close it after you connect successfully. Make sure DHCP function is enabled. If you changed your Wi-Fi network, you need to connect the mower to the new network. Make sure the router is connected and Wi-Fi SSID is correct. EN SYMPTOM CAUSE SOLUTION The firmware upgrade fails. The battery level is less than 50%. Place the mower on the charging station or ensure that the battery level is above 50%. The Wi-Fi signal is weak. Move closer to the router to strengthen the signal. Charging station indicator is solid blue The charging station has lost connection with the mower. Charging station indicator is flashing green and blue alternately The charging station is not connected, or not yet connected, to the home Wi-Fi. Check if the mower is too far from the charging station. If the mower frequently disconnects at a certain location, adjust the placement of the charging station according to the instructions in the QSG. Make sure the mower is successfully paired with the app. If pairing is complete, check the Wi-Fi signal strength on your smartphone. If the signal is weak, the charging station may be too far from the router. 1. Reposition the charging station following the instructions in the QSG. 2. Move the router closer to the charging station. 3. Buy a Wi-Fi signal booster. When the mower is equip-

ped with the Cut to Zero module, its housing may often get stuck on raised obstacles. The selected Cut to Zero cutting height is too low. Check the Cut to Zero height setting and adjust it one level higher. Low Power Mode (UEC Mode) Description:

UEC (Ultra Energy Conservation) Mode is a low power mode in which all non-essential modules are turned off. A 2 mm hole is reserved below the charging contacts on the charging station for enabling or disabling this mode. Use a pointed tool to press or release the internal switch through this hole to enter or exit Low Power Mode. How to Enable UEC Mode:

Insert a pointed tool into the 2 mm hole located below the charging contacts on the charging station. Gently press the internal switch until it pops up. This will activate UEC Mode, turning off all non-essential modules to minimize power consumption. Charging Behavior in UEC Mode:

When UEC Mode is enabled and the charging cable is connected, all power-consuming components will be turned off except for the power board, battery pack, and charger to conserve energy. Exiting UEC Mode During Charging:

To exit UEC Mode, use the same pointed tool to press the internal switch inside the hole again. Once the switch is pressed down, the system will return to normal operation and all modules will be powered on. Positec USA, Inc. Charlotte, NC 28216 USA ARXXXXXXXX 15 EN HELPLINE NUMBER 1-866-354-WORX (9679) HELPLINE NUMBER WARRANTY STATEMENT FOR Worx Landroid Vision Worx offer 3 years warranty period to Landroid Vision robotic mower from date of purchase, except for accessories and consumables. If your Worx Landroid Vision becomes defective due to faulty materials or workmanship within a limited warranty period from the date of purchase, we guarantee to:

Replace or repair all defective parts, free of charge, or, Repair products free of charge, or, Replace the unit with a new or re-conditioned unit, free of charge. The Limited Warranty is subject to the following conditions:

Battery packs are guaranteed for 1 year period only, regardless of online registration. (The warranty is only for the original battery packs provided with the Robotic mower or the same model number of original battery packs, please note other battery packs are excluded from the warranty.) The Find my Landroid module, the Off Limits module, the High Pitched Alarm module and the Night Cut Light module are guaranteed for 1 year period only, regardless of online registration. The RTK module, Cut to Edge module are guaranteed for 3 years, regardless of online registration. The tool has not been misused, abused, neglected, altered, modified or repaired by anyone other than an authorized service center. Only genuine Worx Landroid Vision accessories and parts have been used on or with the product. The tool has been subjected to fair wear and tear. The tool has not been used for trade or professional purposes. The tool has not been used for rental purposes. The tool has not sustained damage through foreign objects, substances or accidents. Your limited warranty does not cover:

Components that are subject to natural wear and tear caused by use in accordance with operating instructions. Unauthorized/improper maintenance/handling or overload is excluded from this warranty as are accessories such as blades and wheels, etc. Damage, malfunctions or failure resulting from all cleaning methods other than hose water cleaning the product, e.g., high pressure washer, steam and hose installed with any nozzle. For guarantee claims, please contact the WORX Helpline. You will need to submit a registration document and proof of purchase in the form of a valid receipt that displays date and place of purchase. Landroid Helpline 1-800-727-6260 This guarantee statement does not replace but is in addition to your statutory rights. This warranty does not apply to accessories supplied with the tool. This warranty applies only to the original purchaser and may not be transferred. All repairs and replacement tools will be covered by the limited warranty for the balance of the warranty period from the date of the original purchase. Please register your tool by scanning the QR code below. This registration entitles you to manage and view your product warranty. 30 Days Satisfaction Guarantee If you are not completely satisfied with the performance of your WORX tool, simply return it within 30 days. It must be returned in its original packaging complete as purchased, including accessories and any items provided free of charge to the point of purchase for a full refund or exchange. A valid receipt that displays the date and place of purchase must be provided. You will need to submit evidence of online registration and proof of purchase in the form of a valid receipt that displays date and place of purchase. When calling the Helpline please have details of the WORX model number and serial number available. This will help WORX Customer Service when dealing with your call. How to find model number and serial number? Please see below example. Lawn Mowing Robot / Robot tondeuse gazon /

Robot cortacsped Patent:see www.ptcpatents.com FCC ID: 2ASC3RBT202501 IC: 24992-RBT202501 20V Max Lithium 10.3kg IPX6 Contains FCC ID: XMR202008EC25AFXD Contains IC: 10224A-022EC25AFXD WARNING/AVERTISSEMENT/ADVERTENCIA For use only with Worx WA3674 battery. For use only with Worx WA3752 charger. Pour usage seulement avec batterie Worx WA3674. Pour usage seulement avec chargeur Worx WA3752. Para utilizar slo con la batera Worx WA3674. Para utilizar slo con el cargador Worx WA3752. Positec USA, Inc. Charlotte, NC 28216 USA WR310 Made in China/

Fabriqu en Chine/Fabricado en China WARNING - Do not touch rotating blade AVERTISSEMENT - Ne touchez pas la lame rotative ADVERTENCIA No toque la cuchilla giratoria XXXX XXXXXXXXXXXXXXXX 16 EN AVERTISSEMENT: Certaines poussires cres par le ponage, le sciage, le meulage, le perage et autres activits de construction contiennent des produits chimiques reconnus par ltat de Californie comme pouvant causer le cancer, des anomalies congnitales ou dautres problmes de reproduction. Quelques exemples de ces produits chimiques:

Le plomb provenant des peintures au plomb;

La silice cristallise provenant des briques et du ciment et dautres produits de maonnerie;

Larsenic et le chrome provenant du bois trait chimiquement. Les risques que vous encourez rsultant de ces expositions varient selon la frquence laquelle vous effectuez ce type de travail. Pour rduire votre exposition ces produits chimiques : travailler dans un endroit bien ventil, et porter un quipement de scurit appropri tel que certains masques antipoussires qui sont spcialement conus pour filtrer les particules microscopiques. AVERTISSEMENT: Ce dispositif peut vous exposer aux produits chimiques notamment le plomb et le di-phtalate (de 2-thylhexyle) (DEHP) qui sont reconnus dans ltat de Californie comme causant des cancers et des anomalies congnitales ou dautres anomalies de la reproduction.Pour en savoir plus, veuillez consulter le site www.P65Warnings.ca.gov. AVERTISSEMENT: Veuillez lire toutes les consignes de scurit et les instructions. Le non-

respect des avertissements et instructions peut entraner un choc lectrique, un incendie et/ou des blessures graves. Lisez attentivement les instructions pour assurer le fonctionnement en toute scurit de la machine. Conservez tous les avertissements et les instructions pour une rfrence future.

- Cet appareil nest pas destin tre utilis par des personnes (y compris les enfants) dont les capacits physiques, sensorielles ou mentales sont rduites, sans exprience et/ou aux comptences insuffisantes, sauf si elles ont t encadres concernant lutilisation de lappareil par une personne responsable de leur scurit.

- Les enfants doivent tre surveills pour sassurer quils ne jouent pas avec lappareil. AVERTISSEMENT: Aux fins de la recharge de la batterie, utilisez uniquement lunit dalimentation dtachable fournie avec cet appareil. AVERTISSEMENT: Pour rduire le risque de blessures aux personnes et de dommages lappareil, ne retirez pas le bloc de batteries avant dteindre lappareil. IMPORTANT LISEZ ATTENTIVEMENT AVANT LUTILISATION CONSERVEZ POUR UNE RFRENCE FUTURE Consignes de scurit Formation a) Lisez attentivement les instructions. Assurez-vous de bien comprendre les instructions et de vous familiariser avec les commandes et la bonne utilisation de lappareil. b) Ne laissez jamais les personnes peu familires avec ces instructions ou les enfants utiliser lappareil. Les rglementations locales peuvent limiter lge de loprateur. c) Loprateur ou lutilisateur est responsable des accidents ou dommages causs dautres personnes ou leurs biens. Prparations a) Assurez-vous que le systme de dlimitation du primtre automatis est correctement install, conformment aux instructions. Cette machine fonctionne sans cble priphrique ou frontire virtuelle. Elle peut identifier 17 F automatiquement la zone de travail et la zone de non-travail grce la camra. Une fois la machine mise en marche, la camra se met automatiquement en marche. La machine reconnat par la camra la zone de travail qui est la pelouse et la zone non travaille qui nest pas la pelouse. Lorsque la machine atteint la limite de la pelouse, elle tourne automatiquement pour continuer dans la zone de travail. Ajoutez une bande magntique pour dlimiter la pelouse avec celle du voisin. La machine tourne lorsquelle rencontre une bande magntique pendant la tonte. Elle tond le long de la bande magntique lorsquelle tourne. b) Inspectez priodiquement la zone o lappareil doit tre utilis et enlever toutes les pierres, btons, fils, os et autres objets trangers. Inspectez et nettoyez priodiquement les limites entre la zone pelouse et la zone non-pelouse. Le dblaiement des limites aide la tondeuse identifier la zone de travail. c) Inspectez visuellement de faon priodique pour voir si les lames, les boulons de lame et le carter de coupe ne sont pas uss ou endommags. Remplacez les lames ou les boulons uss ou endommags dans des ensembles pour prserver lquilibre. d) Sur les appareils multibroches, sachez que la rotation dune lame peut entraner celle des autres lames. e) AVERTISSEMENT! La tondeuse ne doit pas tre utilise sans linstallation adquate de la garde. Fonctionnement 1. Gnralits a) Ne jamais faire fonctionner lappareil des gardes dfectueuses ou sans dispositifs de scurit, par exemple des dflecteurs, en place. b) Ne mettez pas les mains ou les pieds prs ou sous les pices rotatives. Restez lcart de louverture de dcharge tout moment. c) Ne soulevez ou portez jamais un appareil pendant que le moteur est en marche. d) Faites fonctionner le dispositif de dsactivation de lappareil,

- enlever lobjet lorigine du blocage;

- contrler, nettoyer ou travailler sur lappareil. e) Il nest pas autoris de modifier la conception originale de la tondeuse gazon robot. Toutes les modifications sont effectues vos propres risques. f) Dmarrez la tondeuse gazon robot selon les instructions. Lorsque le bouton de mise sous tension est allum, assurez-vous de garder vos mains et pieds loigns des lames pivotantes. Ne mettez jamais vos mains et vos pieds sous la tondeuse. g) Nessayez jamais de soulever la tondeuse robot ou de la porter lorsque le bouton de mise sous tension est allum. h) Ne laissez pas les personnes qui ont des connaissances rduites sur le fonctionnement et le comportement des tondeuses gazon robot utiliser la tondeuse. i) Ne posez rien au-dessus de la tondeuse robot ou sa station de charge. j) Nautorisez pas lutilisation de la tondeuse robot avec un disque de coupe ou un carter dfectueux. Elle ne doit pas tre utilise avec des lames, vis, crous ou cbles dfectueux. k) Mettez toujours la tondeuse robot hors tension lorsque vous navez pas lintention de lutiliser. La tondeuse robot peut dmarrer uniquement si le bouton de mise sous tension est allum et le code PIN correct a t saisi. L) Maintenez vos mains et vos pieds loigns des lames tournantes. Ne placez jamais vos mains ou vos pieds auprs du ou sous le corps lorsque la tondeuse robotique est en marche. m) vitez dutiliser lappareil et ses priphriques dans les conditions mtorologiques mauvaises en particulier lorsquil existe des risques de foudre. n) Ne touchez pas les parties dangereuses en mouvement avant quelles ne se soient compltement arrtes. o) Pour les machines utilises dans les lieux publics, des panneaux davertissement doivent 18 F tre placs autour de la zone de travail de la machine. Ils doivent contenir les lments essentiels de texte suivant:

Avertissement ! Tondeuse gazon automatique ! Ne vous approchez pas de la machine !

Surveillez les enfants!

2. De plus lorsque lappareil fonctionne automatiquement a) Ne laissez pas la machine fonctionner sans surveillance si vous savez que des animaux domestiques, des enfants ou des personnes se trouvent proximit. b) Veuillez rgler le smartphone pour verrouiller automatiquement lcran aprs 30 secondes afin dviter que lapplication ne soit utilise mauvais escient par dautres. Entretien et stockage AVERTISSEMENT! Lorsque la tondeuse est retourne, le bouton dalimentation doit toujours tre dsactiv. Le bouton dalimentation doit toujours tre dsactiv pendant tous les travaux sur le chssis de la tondeuse, comme le nettoyage ou le remplacement des lames. a) Maintenez tous les crous, boulons et vis bien serrs pour sassurer que lappareil est en bon tat de marche. b) Inspectez la tondeuse gazon robot chaque semaine et remplacez les pices uses ou endommages pour la scurit. c) Assurez-vous particulirement que les lames et le disque de coupe ne sont pas endommags. Remplacez toutes les lames et les vis en mme temps si ncessaire pour assurer le bon quilibre des pices rotatives. d) Veiller ce que seules les pices de rechange du matriel de coupe de bonne qualit soient utilises. e) Sassurez que les batteries sont charges en utilisant le chargeur adquat recommand par le fabricant. La mauvaise utilisation peut entraner un choc lectrique, une surchauffe ou une fuite du liquide corrosif de la batterie. f) En cas de fuite dlectrolyte avec de leau /un agent de neutralisation, consultez un mdecin en cas de contact avec les yeux etc. g) Lentretien de lappareil devrait tre effectu selon les instructions du fabricant. h) Afin dobtenir les meilleures performances, veuillez prter attention la plage de temprature ambiante suivante, ne pas recharger, utiliser ou entreposer en cas de dpassement de la plage de temprature suivante:

a) Plage de temprature de charge : 32F~104F (0C~40C) b) Plage de temprature de dcharge : -4F~131F (-20C~55C) c) Plage de temprature de stockage : -4F~167F (-20C~75C) i) Une fuite de liquide de batterie peut provoquer une irritation de la peau et des yeux ou des brlures chimiques. a) vitez tout contact avec les yeux et la peau. b) Si du liquide pntre dans les yeux : Ne pas frotter. Rincez les yeux ouverts leau pendant au moins 15 minutes et consultez un mdecin. c) En cas de contact accidentel, lavez immdiatement et soigneusement la zone de contact avec de leau et du savon doux. d) Utilisez un absorbant inerte tel que du sable sur le liquide renvers. Recommandation Pour raccorder lappareil et/ou ses priphriques uniquement un circuit dalimentation protg par un courant diffrentiel rsiduel (RCD) avec un courant de dclenchement qui ne dpasse pas 30mA. 19 F Dangers rsiduels Pour viter les blessures, portez les gants de protection lors du remplacement des lames. Transport Lemballage dorigine doit tre utilis lors du transport de la tondeuse robot sur de longues distances. Pour se dplacer en toute scurit dans la zone de travail:

a) Appuyez sur le bouton STOP (ARRT) pour arrter la tondeuse. Vous choisissez un code PIN quatre chiffres quand vous dmarrez la tondeuse pour la premire fois. b) Mettez toujours la tondeuse robot hors tension si vous avez lintention de la porter. c) Portez la tondeuse par la poigne situe larrire sous la tondeuse. Portez la tondeuse avec le disque de coupe loign de votre corps. CONSIGNES GNRALES DE SCURIT CONCERNANT LA BATTERIE a) Ne pas dmonter, ouvrir ou dchiqueter le bloc batterie. b) Ne pas exposer le bloc batterie la chaleur ou au feu. Evitez de ranger la batterie dans un endroit expos la lumire directe du soleil. c) Ne pas court-circuiter une batterie. Ne stockez pas les blocs batterie en vrac dans une bote ou un tiroir o ils peuvent se court-circuiter ou tre court-circuits par dautres objets mtalliques. Lorsque le bloc batterie nest pas utilis, conservez-le loin dautres objets mtalliques, tels que des trombones, des pices de monnaie, des cls, des clous, des vis ou dautres objets mtalliques de petite taille, qui pourraient tablir une connexion dun terminal lautre. Le fait de crer un court-circuit entre les bornes de la batterie peut causer des brlures ou des incendies. d) Ne pas soumettre la batterie des chocs mcaniques. e) En cas de fuite de la batterie, ne pas laisser le liquide entrer en contact avec la peau ou les yeux. Si un contact a t effectu, laver la zone touche avec beaucoup deau et consulter un mdecin. f) Ne pas utiliser de batterie qui na pas t conue pour tre utilise avec cet appareil. g) Maintenez la batterie hors de porte des enfants. h) Achetez toujours une batterie recommande par le fabricant de lappareil. i) Conservez le bloc batterie propre et sec. j) Essuyez les bornes de la batterie avec un chiffon propre et sec si elles deviennent sales. k) La batterie doit tre charge avant son utilisation. Utilisez toujours le chargeur adapt et reportez-vous aux instructions du fabricant ou au manuel de lquipement pour suivre les instructions concernant la procdure de charge. l) Ne laissez pas le bloc batterie en charge prolonge lorsquil nest pas utilis. m)Aprs de longues priodes de stockage, il peut tre ncessaire de charger et de dcharger la batterie plusieurs fois pour obtenir des performances optimales. n) Rechargez le bloc batterie uniquement avec le chargeur spcifi par Worx. Nutilisez pas un chargeur autre que celui spcifiquement conu pour tre utilis avec lquipement. o) Conservez la documentation originale du produit pour rfrence ultrieure. p) Utilisez uniquement la batterie dans lapplication pour laquelle elle a t prvue. q) Retirez la batterie de lquipement lorsquil nest pas utilis. r) liminez la batterie de faon adquate. s) Ne pas mlanger des cellules de fabricants, de capacits, de tailles ou de type diffrents dans un appareil. t) Nexposez pas la batterie des micro-ondes et de la haute pression. Exigences relatives au manuel dutilisation dun produit sans fil a) Ce dispositif est conforme la partie 15 des rgles du FCC. Son fonctionnement est soumis aux deux conditions suivantes:

20 F (1) Cet appareil ne doit pas causer dinterfrences nuisibles, et

(2) cet appareil doit accepter toute interfrence reue, y compris toute interfrence pouvant entraner un fonctionnement indsirable. b) AVERTISSEMENT: Les changements ou modifications de cet appareil non expressment approuvs par la partie responsable de la conformit pourraient annuler lautorisation de lutilisateur faire fonctionner lquipement. c) Cet appareil contient un ou plusieurs metteurs/rcepteurs exempts de licence qui sont conformes aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Son fonctionnement est soumis aux deux conditions suivantes:

(1) Cet appareil ne doit pas causer dinterfrences nuisibles.

(2) Cet appareil doit accepter toute interfrence reue, y compris toute interfrence pouvant entraner un fonctionnement indsirable. d) REMARQUE: Cet quipement a t examin et sest avr tre conforme aux limites pour un dispositif numrique de la classe B, conformment la partie 15 des rgles du FCC. Ces limites sont conues pour assurer la protection raisonnable contre une interfrence dommageable dans une installation rsidentielle. Cet quipement gnre, utilise et peut mettre une nergie de frquence radio et, sil nest pas install et utilis conformment aux instructions, il peut causer des interfrences nuisibles aux communications radio. Cependant, il ny a aucune garantie que linterfrence ne se produira pas dans une installation particulire. Si cet quipement cause une interfrence dommageable un radio ou la rception dmissions tlvises, laquelle peut tre dtermine en allumant ou teignant lquipement, lutilisateur est encourag essayer de corriger linterfrence par une ou plusieurs des mesures suivantes:

- Rorienter ou replacer lantenne de rception.

- Augmenter la sparation entre lquipement et le rcepteur.

- Relier lquipement dans une prise sur un circuit diffrent de celui auquel le rcepteur est connect.

- Consulter le revendeur ou un technicien expriment de radio/TV pour de laide. Pour appareil mobile a) Pour satisfaire aux exigences dexposition aux RF de la FCC et de lISED, une distance de sparation de 20 cm ou plus devrait tre maintenue entre lantenne de cet appareil et les personnes pendant le fonctionnement de lappareil b) Pour assurer la conformit, il nest pas recommand doprations une distance plus proche que cette distance Slection de la rgion (pour appareil Wi-Fi 2,4 G) Limite par les rglementations locales, la version pour lAmrique du Nord na pas doption de slection de rgion. 21 F INFORMATION SUR LA TONDEUSE AVERTISSEMENT la tondeuse robot peut tre dangereuse si elle est mal utilise.Lisez attentivement le manuel de l'oprateur et assurez-vous de matriser le contenu avant d'utiliser votre tondeuse gazon robot. AVERTISSEMENT - Tenez-vous une distance de scurit de la machine lors de l'utilisation. AVERTISSEMENT Activez le dispositif de dsactivation avant de travailler sur ou de soulever la machine. Les batteries peuvent sintroduire dans le cycle de l'eau si elles sont limines de manire inapproprie, ce qui peut tre dangereux pour l'cosystme. Ne pas liminer les batteries usages avec les dchets municipaux non tris. Interdire le dmontage de la machine sans autorisation. Appareil de catgorie III AVERTISSEMENT - Ne montez pas sur la machine. Lire le manuel de loprateur Batterie Li-Ion, les batteries doivent tre recycles. Ne pas jeter au feu POSITEC Inc. a tabli un partenariat avec la RBRC Corporation pour recycler toutes les batteries Positec avec le sceau RBRC-

call2recycle. Pour protger l'environnement, ne jetez pas les batteries dans la poubelle. la fin du cycle de vie des batteries, appelez le 1.800-822-8837 pour un service gratuit qui vous dbarrassera correctement de la batterie. Vous pouvez personnaliser la performance de votre tondeuse avec des accessoires. Consultez la page www.worx.com/lawn-garden/

robotic-lawn-mowers.html pour en savoir plus sure les accessoires disponibles en options. 22 F Description de linterface rseau Les interfaces rseau suivantes sont actives par dfaut lorsque lappareil est mis sous tension :

Bluetooth Permet lappairage et la liaison entre lappareil et lapplication mobile. Prend en charge la configuration du Wi-Fi via lapplication. Pendant le processus de cartographie, le Bluetooth permet galement le contrle et la gestion de lappareil. Wi-Fi Connecte lappareil au rseau sans fil domestique pour la communication de donnes avec le serveur infonuagique. Prend en charge la sur-

veillance, le contrle et la configuration des paramtres distance via lapplication. Permet galement les mises jour du micrologiciel OTA

(Over-The-Air) afin dassurer une optimisation logicielle en temps opportun. Rseau cellulaire 4G Fournit la connectivit au serveur infonuagique en labsence de Wi-Fi, garantissant une communication continue entre lappareil et lapplication pour linteraction distance, la synchronisation des donnes et le contrle. RadioLink Se connecte la station de charge compatible pour recevoir des donnes de positionnement RTK haute prcision. Permet une prcision de positionnement au centimtre prs, amliorant la stabilit de la navigation et la prcision des oprations. Mode basse consommation (Mode UEC) Description :

Le mode UEC (Ultra Energy Conservation) est un mode de faible consommation dnergie dans lequel tous les modules non essentiels sont dsactivs. Un trou de 2 mm est prvu sous les contacts de charge sur la station de charge pour activer ou dsactiver ce mode. Utilisez un outil pointu pour appuyer sur linterrupteur interne travers ce trou ou le relcher afin dactiver ou de quitter le mode basse consommation. Comment activer le mode UEC :

Insrez un outil pointu dans le trou de 2 mm situ sous les contacts de charge de la station de charge. Appuyez doucement sur linterrupteur interne jusqu ce quil ressorte. Cela activera le mode UEC, dsactivant tous les modules non essentiels afin de minimiser la consommation dnergie. Comportement de charge en mode UEC :

Lorsque le mode UEC est activ et que le cble de charge est branch, tous les composants consommateurs dnergie sont dsactivs, lexception de la carte dalimentation, du bloc-batterie et du chargeur, afin dconomiser lnergie. Sortie du mode UEC pendant la charge :

Pour quitter le mode UEC, utilisez le mme outil pointu pour appuyer de nouveau sur linterrupteur interne lintrieur du trou. Une fois linter-

rupteur enfonc, le systme reprendra son fonctionnement normal et tous les modules seront ractivs. 23 F