In-cab workhorse Apoc 20 / FT5000MW Future Capabilities Driver Behavior Key Value Proposition Versatile, under dash device:
cars & trucks in single device most common utility features Internal antennas Applications ELD Light, Medium, Heavy Duty Diagnostics Leased and Rental Vehicle Recovery Capabilities Motion Detection High Frequency Tracking Vehicle Diagnostics (ISO-15765, J1939) Ignition Detection Starter Disable (via relay) Operator ID (1-wire) FLEX CONFIDENTIAL DO NOT DISCLOSE In-cab workhorse - Apoc 20 / FT5000MW Location GPS (multi-constellation) Assisted acquisition: 2s (via cloud) Acquisition Sensitivity: -160dBm (1) Tracking Sensitivity: -167dBm (2) Global Cellular Connectivity 4G , Global Bands 2G:
850,900,1800,1900 Local Area Connectivity BLE: 5.0 (master, slave, LE data packet length) Dimensions 6.33 x 2.6 x 1 (151mm x 66mm x 25mm) Weight TBC FLEX CONFIDENTIAL DO NOT DISCLOSE Internal Sensors 6-axis IMU System temperature Battery level Internal Antennas Cellular GPS Bluetooth External Connectors Power in (6-48VDC) 1-Wire Digital Input x4 Digital Output x3 CAN 2.0B x1 (ISO-15765 or J1939) RS-232 ISO-9141 (K line for Tachometer) J1708 Battery User Interface Multi-color LED Buzzer
(1) (2) Based on GPS chipset specification
(4) (5) Inside operating temperature range Operating Temperature Powered: -40C 70C Battery: -20C 60C Charging: 0C 45C Housing Industrial grade Polycarbonate (PC) Ingress Protection (IP): 4X Security Secure boot TLS/SSL FIPS 140-2 (Optional upgrade) Certifications FCC, IC, CE, PTCRB, RCM Environmental RoHS, Reach, SAEJ1455 [Thermal Shock (4), Humidity
(5), Mechanical Vibration, Mechanical Shock, Electrostatic Discharge]
Ah ISED Notice This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en This device complies with the Canadian ICES-003 Class B specifications. CAN ICES-003(B)/ NMB-003(B) ISED RF Exposure Statement This device complies with ISED RSS-102 RF exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the IC RSS-102 RF exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. Cet appareil est conforme aux limites d'exposition aux rayonnements de la CNR-102 dfinies pour un environnement non contrl. Afin d'viter la possibilit de dpasser les limites d'exposition aux frquences radio de la CNR-102, la proximit humaine l'antenne ne doit pas tre infrieure 20 cm (8 pouces) pendant le fonctionnement normal. FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. RF Exposure Information This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. frequency (RF) energy set by to radio