Welcome Guide PowerUp Whats Included PowerUp station Portable chargers (x 12) AC power cord Anti-theft lock Installing PowerUp Please note: once fixed in place, the anti-theft lock may be difficult to remove. 1. Peel off film 2. Place it firmly on a flat surface 3. Lift up the PowerUp station and secure it on the anti-theft lock highlight Do not move the anti-theft lock for at least 4 hours after being secured. Operating PowerUp Turn it on 1. Plug it in 1AC 2. Press the power switch 2 highlight --- / O 3. Wait around 30 seconds for the lightning bolt to light up 3 LED Specifications Input AC 100~240 V 50~60 Hz USB Output Wireless Standard Bluetooth Version iBeacon Protocol Size Total Weight 5 V / 2 A Wi-Fi 802.11 b/g/n BLE BLE 329 320 210 mm 8.1 kg WIFI : Ark with backend server through WIFI connection.Used in order to obtain, upload log, and software upgrades. BT IBeacon: used to send radio. BT CSR: with mobile phone via bluetooth connection.To complete the installation of the ark in the phone APP, set the action. This is the first time engineering commissioning, the customer shall not apply 36-month limited warranty Lifetime technical support FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator
& your body.