Product Overview CelloSense\ LV-760 Proprietary and Confidential Version 1.2 Revised and Updated: May 30, 2022 CELLOCATOR - A POWERFLEET BRAND. 14 HAMELACHA ST. ROSH HA'AYIN 4809133, ISRAEL TEL: 972-3-5723111 WWW.CELLOCATOR.COM Copyright 2022 by PowerFleet Inc. CelloSense\LV-760 Product Overview Legal Notices IMPORTANT 1. All legal terms and safety and operating instructions should be read thoroughly before the product accompanying this document is installed and operated. 2. This document should be retained for future reference. 3. Attachments, accessories or peripheral devices not supplied or recommended in writing by PowerFleet Inc. May be hazardous and/or may cause damage to the product and should not, in any circumstances, be used or combined with the product. General The product accompanying this document is not designated for and should not be used in life support appliances, devices, machines or other systems of any sort where any malfunction of the product can reasonably be expected to result in injury or death. Customers of PowerFleet Inc. Using, integrating, and/or selling the product for use in such applications do so at their own risk and agree to fully indemnify PowerFleet Inc. For any resulting loss or damages. Warranty Exceptions and Disclaimers PowerFleet Inc. Shall bear no responsibility and shall have no obligation under the foregoing limited warranty for any damages resulting from normal wear and tear, the cost of obtaining substitute products, or any defect that is (i) discovered by purchaser during the warranty period but purchaser does not notify PowerFleet Inc. Until after the end of the warranty period, (ii) caused by any accident, force majeure, misuse, abuse, handling or testing, improper installation or unauthorized repair or modification of the product, (iii) caused by use of any software not supplied by PowerFleet Inc., or by use of the product other than in accordance with its documentation, or (iv) the result of electrostatic discharge, electrical surge, fire, flood or similar causes. Unless otherwise provided in a written agreement between the purchaser and PowerFleet Inc., the purchaser shall be solely responsible for the proper configuration, testing and verification of the product prior to deployment in the field. POWERFLEET INC.S SOLE RESPONSIBILITY AND PURCHASERS SOLE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE TO REPAIR OR REPLACE THE PRODUCT HARDWARE, SOFTWARE OR SOFTWARE MEDIA (OR IF REPAIR OR REPLACEMENT IS NOT POSSIBLE, OBTAIN A REFUND OF THE PURCHASE PRICE) AS PROVIDED ABOVE. POWERFLEET INC. EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, SATISFACTORY PERFORMANCE AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL POWERFLEET INC. BE LIABLE FOR ANY INDIRECT, SPECIAL, EXEMPLARY, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION LOSS OR INTERRUPTION OF USE, DATA, REVENUES OR PROFITS) RESULTING FROM A BREACH OF THIS WARRANTY OR BASED ON ANY OTHER LEGAL THEORY, EVEN IF POWERFLEET INC. HAS BEEN ADVISED OF THE POSSIBILITY OR LIKELIHOOD OF SUCH DAMAGES. Intellectual Property Copyright in and to this document is owned solely by PowerFleet Inc. Nothing in this document shall be construed as granting you any license to any intellectual property rights subsisting in or related to the subject matter of this document including, without limitation, patents, patent applications, trademarks, copyrights or other intellectual property rights, all of which remain the sole property of PowerFleet Inc. Subject to applicable copyright law, no part of this document may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording or otherwise), or for any purpose, without the express written permission of PowerFleet Inc. Copyright 2020. All rights reserved. CelloSense\LV-760 Product Overview Page 2 of 19 Copyright 2022 by PowerFleet Inc. CelloSense\LV-760 Product Overview FCC & IC Compliance Statement The FCC Wants You to Know This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
a) Reorient or relocate the receiving antenna. b) Increase the separation between the equipment and receiver. c) Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. d) Consult the dealer or an experienced radio/TV technician. CAN ICES-3 (B) / NMB-3 (B) This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de classe B est conforme la norme canadienne ICES-003. If shielded cables were used for testing include:
<<< In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. >>>>
Copyright 2020. All rights reserved. Part 18 warning For devices approved under Part 18, information on the following shall be provided to the user in the instruction manual, or on the packaging if an instruction manual is not provided (Section 18.213)For devices approved under Part 18, information on the following shall be provided to the user in the instruction manual, or on the packaging if an instruction manual is not provided
(Section 18.213) The interference potential of the device or system. CelloSense\LV-760 Product Overview Page 3 of 19 Copyright 2022 by PowerFleet Inc. CelloSense\LV-760 Product Overview Maintenance of the system. Simple measures that can be taken by the user to correct interference. For RF lighting devices, provide an advisory statement, either on the product packaging or with other user documentation, similar to the following:
This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45-30 MHz. Variations of this language are permitted provided all the points of the statement are addressed, and may be presented in any legible font or text style. Appendix C1 - Modification statements FCC Warning (Modification statement) Modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment under FCC Rules. Or Powerfleet has not approved any changes or modifications to this device by the user. Any changes or modifications could void the users authority to operate the equipment. ISED Warning (Modification statement) Augury napprouve aucune modification apporte lappareil par lutilisateur, quelle quen soit la nature. Tout changement ou modification peuvent annuler le droit dutilisation de lappareil par lutilisateur. ppendix C2 - RF Exposure Warnings CelloSense\LV-760 Product Overview Page 4 of 19 Copyright 2022 by PowerFleet Inc. CelloSense\LV-760 Product Overview Interference statement (if it is not placed in the device) This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Wireless notice This device complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS 102 of the ISED radio frequency (RF) Exposure rules. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Le prsent appareil est conforme l'exposition aux radiations FCC / ISED dfinies pour un environnement non contrl et rpond aux directives d'exposition de la frquence de la FCC radiofrquence (RF) et RSS 102 de la frquence radio (RF) ISED rgles d'exposition. L'metteur ne doit pas tre colocalis ni fonctionner conjointement avec autre antenne ou autre metteur. The distance between user and products should be no less than 20cm La distance entre l'utilisateur et de produits ne devrait pas tre infrieure 20cm CelloSense\LV-760 Product Overview Page 5 of 19 Copyright 2022 by PowerFleet Inc. CelloSense\LV-760 Product Overview Table of Contents 1 1.1 1.2 1.3 1.4 2 2.1 2.2 2.3 Introduction .............................................................................................................. 5 Document Scope .......................................................................................................... 5 Definitions, Acronyms and Abbreviations .......................................................................... 5 References and Bibliography ........................................................................................... 6 List of Changes ............................................................................................................ 6 CelloSense at a Glance ............................................................................................... 7 General ....................................................................................................................... 7 Main Features and Benefits ............................................................................................. 8 Intended Markets ......................................................................................................... 8 2.3.1 Cold Chain Compliance .................................................................................................. 9 2.3.2 Real-Time Tracing & Inventory Management ................................................................... 10 2.3.3 Cargo Monitoring Logistics / Scheduling / Proof of Delivery ............................................... 11 BLE (CelloSense) vs. Active/Passive RFID ....................................................................... 11 2.4 3 3.1 CelloSense Features and Capabilities ........................................................................ 13 Feature List and capabilities of CelloSense vs. MultiSense ................................................. 13 Internal Sensors ......................................................................................................... 13 3.1.1 3.1.2 BLE Wireless Communication with CelloTrack Nano 20 ..................................................... 14 3.1.3 Data Logger ............................................................................................................... 15 3.1.4 Long Life Battery ........................................................................................................ 15 3.1.5 Support for iOS background scanning ............................................................................ 15 3.1.6 Configurable parameters .............................................................................................. 15 Mounting ................................................................................................................... 16 3.2 3.3 4 4.1 4.2 5 CelloSense Hardware Components ................................................................................. 16 CelloSense Devices ................................................................................................... 17 Communication with the CelloTrack Nano 20 Hub ............................................................ 17 Pairing CelloSense Devices with the Nano 20 Hub ............................................................ 17 Technical Specifications ........................................................................................... 18 CelloSense\LV-760 Product Overview Page 6 of 19 Copyright 2022 by PowerFleet Inc. CelloSense\LV-760 Product Overview Figures List Figure 1: CelloSense Sensors ......................................................................................................................................... 7 Figure 2: Cold Chain Solution......................................................................................................................................... 9 Figure 3: Real-Time Tracing & Inventory Management ............................................................................................... 10 Figure 4: Cargo Monitoring Logistics Solution ............................................................................................................. 11 Tables List Table 1: Definitions, Acronyms and Abbreviations ........................................................................................................ 5 Table 2: References and Bibliography ........................................................................................................................... 6 Table 3: List of Changes ................................................................................................................................................. 6 Table 4: BLE (CelloSense) vs. Active/Passive RFID ........................................................................................................ 12 Table 5: Applicability Table .......................................................................................................................................... 13 Table 6: HW Components ............................................................................................................................................ 16 Table 7: CelloSense Specifications ............................................................................................................................... 19 CelloSense\LV-760 Product Overview Page 7 of 19 Copyright 2022 by PowerFleet Inc. CelloSense\LV-760 Product Overview 1 Introduction The purpose of this document is to provide high-level information required by service providers and enterprises wishing to utilize the CelloSense device as part of a wireless sensor network (WSN) solution. The solution offers a rugged and long-life battery for real-
time visibility, security and awareness of cargo and asset location, in addition to the monitoring of condition, problems and delays throughout the supply chain. 1.1 Document Scope This document describes the high-level system features and capabilities of the CelloSense device. This document does not deal with the protocols and interfaces between the CelloSense and the backend, nor with the algorithms and logic engine implemented in order to deliver a complete remote monitoring and tracking system. These protocols, APIs, and algorithms are described in separate documentation, as listed in the following sections. 1.2 Definitions, Acronyms and Abbreviations Name WSN Description Wireless Sensor Network Hub (CelloTrack Nano 20 from FW version 34n) Asset & Cargo Management IoT solution using internal sensors and also functioning as a hub for a Wireless Sensor Network (WSN) CelloSense\LV-760 Cellocators long-life, low maintenance sensor, industrial device BLE PCB OTA FOTA Bluetooth Low Energy (BT Smart) Printed Circuit Board Over The Air Firmware Update Over The Air Table 1: Definitions, Acronyms and Abbreviations CelloSense\LV-760 Product Overview Page 8 of 19 Copyright 2022 by PowerFleet Inc. CelloSense\LV-760 Product Overview 1.3 References and Bibliography No. Document Name 1 2 CelloSense Release Notes CelloSense Installation Guide Table 2: References and Bibliography 1.4 List of Changes Version Change 1.2 1st version Remarks Date Approved May 30, 2022 Table 3: List of Changes CelloSense\LV-760 Product Overview Page 9 of 19 Copyright 2022 by PowerFleet Inc. CelloSense\LV-760 Product Overview 2 CelloSense at a Glance 2.1 General With the ever-increasing growth in global supply chains, maintaining an accurate picture of what is happening across your business at any given time is practically impossible. CelloSense, as part of a sensor network, can greatly enhance your supply chain management and costs, especially within high impact environments. Based on IoT technology that incorporates a WSN, CelloSense with its BLE communication is an innovative, rugged, and smart monitoring system that requires low maintenance while ensuring a wide range of businesses in an ever-increasing array of industries can monitor their global cargos and assets. Using renowned Cellocator firmware and technology, the CelloSense utilizes additional BLE cutting edge technology and extensive sensing capabilities to provide a solution that not only tracks assets but also monitors the environment and conditions in which the asset is currently located or handled, via temperature, accelerometer, and magnetic
(doors closing/opening) internal sensors. Figure 1: CelloSense Sensors CelloSense\LV-760 Product Overview Page 10 of 19 Copyright 2022 by PowerFleet Inc. CelloSense\LV-760 Product Overview The CelloSense device provides a robust Multi-Sensor for Real-Time Monitoring & Event Triggering in various IoT applications:
Enables real-time awareness of a variety of objects using the CelloSense as a short range of Wireless Sensor Network (WSN). Providing on-the-fly alert notifications enabling you to take proactive actions whenever required. Many different environment sensing capabilities. Easy integration with hub. High ROI (competitive pricing). BLE based the common protocol used in the IoT industry. Robust and rugged design for high impact environments and IP69K compliance. Long-life, seven years of battery operation (defined scenario). 2.2 Main Features and Benefits This section lists the main features of the CelloSense system and the benefits they provide. For a full list of the available features and further explanations on each feature, refer to the Feature List section. A range of internal embedded sensors that can sense temperature, movement, and door status. These sensors play a big role in reducing risk and exposure to losses, in turn bringing peace of mind to customers. Can be used as a Wireless Sensor Network via BLE communication to the hub
(CelloTrack Nano 20). Keep alive messages ensure parts can be tracked within large warehouses. Install and forget, no maintenance, no battery replacement. Long-life batteries (about seven-year lifespan) do not need replacing or recharging. Inherent Data Logger with the ability to store around 3,000 logged data samples and events. Rugged plastic enclosure, protecting against sunlight and chemicals. Easy to install within harsh environments via two metal tie-wraps or two supplied screws. IP69K Certified (protected against close-range high pressure, high temperature spray downs). Designed to meet ISO 16750 standard (environmental conditions). Compliance with GDP Good Distribution Practice (Europe, US). 2.3 Intended Markets The CelloSense is intended for a wide-range of vertical markets within the MRM industry, many of which can greatly benefit from Cellocator's long-standing expertise in logistics and tracking. The example vertical markets in the following sections are just a sample of the capabilities of the CelloSense. CelloSense\LV-760 Product Overview Page 11 of 19 Copyright 2022 by PowerFleet Inc. CelloSense\LV-760 Product Overview 2.3.1 Cold Chain Compliance With CelloSense devices installed inside a temperature-controlled container / trailer
(together with a hub), or attached to a pallet, box or other type of package loaded with pharmaceutical or perishables, stakeholders in the cold chain process can easily and reliably monitor in real-time the microclimate of the pallet / box, rather than the container environment only. This helps to ensure adequate shelf-life time, guarantee compliance with shipment regulations, and even enables a real-time response in exceptional cases. Figure 2: Cold Chain Solution CelloSense\LV-760 Product Overview Page 12 of 19 Copyright 2022 by PowerFleet Inc. CelloSense\LV-760 Product Overview 2.3.2 Real-Time Tracing & Inventory Management The CelloSense can also provide a real-time tracking and field logistics solution for both warehouse management and the tracking of inventory. For warehouse management, the once a day (keep alive) alert enables the warehouse to remain aware of each and every part, especially in large warehouses, while the tracking of inventory can be particularly useful for monitoring the moving of parts from a logistics center/warehouse to a customer site. Figure 3: Real-Time Tracing & Inventory Management CelloSense\LV-760 Product Overview Page 13 of 19 Copyright 2022 by PowerFleet Inc. CelloSense\LV-760 Product Overview 2.3.3 Cargo Monitoring Logistics / Scheduling / Proof of Delivery High-value cargo being sent from distribution centers or manufacturer sites must reach their destination according to shipment order specifications. With CelloSense devices that communicate with a hub (i.e., the CelloTrack Nano 20 hub), stakeholders can ensure each cargo item, asset or pallet reaches its planned destination on time and according to a predefined route. Figure 4: Cargo Monitoring Logistics Solution 2.4 BLE (CelloSense) vs. Active/Passive RFID The following table presents a matrix of parameters comparing the BLE communication adopted by the CelloSense and commonly used in IoT devices, versus old RFID technology in use in various existing logistic and warehouse solutions. Feature /
Technology BLE Passive RFID Active RFID Power source Internal (<15mA) Energy transferred using RF from reader Internal to tag Battery Required signal strength to unit Yes Medium No Very low Yes Very high Range Up to 100m Up to 3-5 meters Up to 100m CelloSense\LV-760 Product Overview Page 14 of 19 Copyright 2022 by PowerFleet Inc. CelloSense\LV-760 Product Overview Feature /
Technology BLE Passive RFID Active RFID Cost Expensive (~10$) Cheap (<1$) Expensive (~10$) Support internal sensors Security Smartphone/Tablet communications Applications Yes Strong Yes No Weak No Yes Strong No App, logistic, inventory, asset tracking (WSN) Inventory, logistic, security (restricted area), user identification, vending machine Tracking person/asset Frequency 2.4G Various: LF, HF, UHF, SHF Bit rate
~200 kbit/s Table 4: BLE (CelloSense) vs. Active/Passive RFID CelloSense\LV-760 Product Overview Page 15 of 19 Copyright 2022 by PowerFleet Inc. CelloSense\LV-760 Product Overview 3 3.1 CelloSense Features and Capabilities Feature List and capabilities of CelloSense vs. MultiSense Feature CelloSense MultiSense Orientation and Absolute Orientation Impact Free-fall Temperature Sensor Door Open/Close Light Sensor Humidity Sensor Short Range Low Energy Wireless Communication
(or free-fall)
(or free-fall)
(or impact)
(or impact)
MS-TH Long life battery
~7 years
>1 year Maintenance (battery replacement)
Power on/off button Always on IP IP69K IP67 3.1.1 Internal Sensors Table 5: Applicability Table The internal sensors are the main elements of the CelloSense, and provide the monitoring abilities that ensure your assets stay secure. The following sections describe each of the sensors and their capabilities. 3.1.1.1 Accelerometer The legacy CelloTrack accelerometer is used to detect movement, vibrations or impact of assets and enables different transmission rates for a moving asset and a standing asset. It is based on the interrupt mechanism (of the accelerometer chip) for acceleration incidents that pass a certain (configurable) threshold. When the acceleration reading crosses the configured threshold for longer than the configured time, an Impact event is generated. CelloSense\LV-760 Product Overview Page 16 of 19 Copyright 2022 by PowerFleet Inc. CelloSense\LV-760 Product Overview Orientation Change and Absolute Orientation When the Earth-gravity vector of the CelloSense exceeds the configured threshold
(degrees measured), an Orientation event can also be generated and logged. This feature can be used to detect rollover situations, where the tracked asset is rolled on one of its sides or is placed upside down. The Absolute Orientation (x,y,z vectors) is reported via all transmissions of data regarding the asset(s) orientation. Movement/Freefall/Impact The legacy accelerometer user can configure it to work with one of three modes, impact, freefall and ordinary movement events. Impact events detect harsh and dangerous incidents such as a crash, and are easily distinguished from freefall, load/unloading movements and breaching attempts. 3.1.1.2 Temperature Sensor The readings collected by the sensor ensure data logging capabilities that are smart and adaptive in that they help reserve battery life and save energy. Getting real time temperature measurements dramatically improves the control of the shipment and gives the ability to react accordingly. In order to be compatible with GDP (Good Distribution Practice), the internal temperature sensor guarantees an accuracy of 1C and a minimum resolution of 0.1C. 3.1.1.3 Door Open/Close The Door Open / Close sensor enables the placement of CelloSense devices on doors/windows together with a magnet device on door/window frames, so that if the door or window is opened/closed, events will be generated. 3.1.1.4 Proximity Alert WSN-enabled to identify a missing object from the entire solution of the logistic supply chain. For example, if a pallet embedded with a CelloSense device is being removed, is not in the right place, or appears to have been stolen, the Nano hub (or any other hub) can send an alert reporting the missing package/box. For this feature, the RSSI signal strength can be configured according to your specific needs. 3.1.2 BLE Wireless Communication with CelloTrack Nano 20 The method of communication between the CelloSense devices and CelloTrack Nano 20 is BLE (Bluetooth Low Energy) 2.4 GHz short range low energy wireless communication. This method of communication is intended to provide considerably reduced power consumption, footprint and cost, with these three parameters the most important values within the IoT world. Using BLE, the Nano 20 can communicate with up to 16 CelloSense devices in a Master and Slave type setup. However, in order to function correctly as a WSN, the Nano unit and CelloSense devices must be paired. Using Nano 20 and paired CelloSense devices as a local WSN enables you to leverage an environment, within which you can sense where different measurements are expected CelloSense\LV-760 Product Overview Page 17 of 19 Copyright 2022 by PowerFleet Inc. CelloSense\LV-760 Product Overview such as inside cooled cargo boxes, or in a long trailer where the environmental conditions inside the trailer may be different for objects closer to the door. Another form of communication between the CelloTrack Nano 20 hub and CelloSense devices is via transparent (guest) mode. In this mode, no pairing process is required and thus the CelloTrack Nano 20 does not manage or save CelloSense device data or thresholds. As a result, in transparent mode the CelloTrack Nano 20 can be used as a gateway to unlimited CelloSense devices. In situations where only CelloSense MAC addresses are required, Tag mode (similar to iBeacon mode) can be activated. 3.1.3 Data Logger The CelloSense can store around 3,000 logged data samples and events with enable/disable capability. A combination of data logger with the Tx-on-Violation-only mode will store samples and events in the logger, while transmitting events and violations in real-time. 3.1.4 Long Life Battery The long-life AA ER14505 Li-SOCI 2600mAh non-rechargeable battery should last for seven years in typical scenarios. The CelloSense is a disposable device with no maintenance required. 3.1.4.1 Battery Lifetime The CelloSense battery is designed to last ~7 years under the following settings and conditions:
+8dbM Tx power Magnetic sensor is active Temperature sensor is active Sampling rate: St Stationary - once every 360 minutes; At movement - once every 0.5 minute Transmission rate: St Stationary - once every 360 minutes; At movement - once every 0.5 minute Room temperature (25C) Note that where temperature is not mentioned, battery performance is valid at +20C. 3.1.5 Support for iOS background scanning The Services field and the added half of the MAC address to the Complete local name string ensures full functionality in an iOS environment, also when the app is running in the background. 3.1.6 Configurable parameters The following transmission and connection parameters can be configured:
CelloSense Tx power (+8 to -18 dBm) Tx duration (20-5100 ms) CelloSense\LV-760 Product Overview Page 18 of 19 Copyright 2022 by PowerFleet Inc. CelloSense\LV-760 Product Overview Timers multiplier: multiplier of 60 (secondsminutes) allows Relaxed / Violation /
Proximity timers to go beyond the 24h limit (up to 60 days) Connection timeout: maximum allowed time a CelloSense connection session can last
(1-2147 seconds) 3.2 Mounting The CelloSense devices can be attached to a tracked object via two methods: using two screws, or with plastic/metal ties that can be weaved through the two holes on the side of the device. 3.3 CelloSense Hardware Components The CelloSense hardware components are listed in the table below:
Name/Part Number Description Picture CelloSense device The CelloSense device. PN: 715-50100 CelloSense Accessories PN: 712-00020 Includes Two metal tie wraps, One sided adhesive, Two screws CelloSense Magnet device PN: 712-00010 Installed in locations to work opposite the CelloSense (such as on a door). Table 6: HW Components CelloSense\LV-760 Product Overview Page 19 of 19 Copyright 2022 by PowerFleet Inc. CelloSense\LV-760 Product Overview 4 4.1 CelloSense Devices This section describes the CelloSense devices and their technical attributes. Note that the CelloSense device is sealed to conform to standard IP69K (protection against close-range high pressure, high temperature spray downs). Communication with the CelloTrack Nano 20 Hub Communication between the CelloSense device and Nano 20 is via short range low energy wireless communication. The actual rate of communication between the two can be configured. There is also a special communication feature called CelloSense Provisioning: if five keep alive messages are not received (according to a configurable parameter) by the device, an event is created and the relevant device is considered "lost". If the device is subsequently communicative, a communication-restore event is sent. 4.2 Pairing CelloSense Devices with the Nano 20 Hub In order to create the WSN, the CelloTrack Nano 20 and each CelloSense device must be paired. The Nano 20 can pair with up to 16 devices, though it is also possible to report on Guest or "Tag " CelloSense devices, which are not actually paired with the Nano 20 hub (but part of a VLR (Visitor Location Register) database, meaning the Nano 20 can transparently transfer the CelloSense device data to the backend but the Nano 20 does not manage CelloSense devices, i.e. logs/thresholds). The Nano 20 can work in parallel with paired CelloSense devices and Guest or "Tag"
CelloSense devices. "Guest" or "Tag" CelloSense devices can be especially useful when many mobile cargo loads / assets need to be monitored. The difference between "Guest" and "Tag" modes is that the CelloTrack Nano only reports on the existence (advertisements) of unpaired CelloSense units in Tag mode, while in Guest mode the sensor data is sent to the backend. Pairing is performed via the Cellocator Programmer tool (shown in the following image) by entering the CelloSense MAC address. For further information, download the CelloTrack Nano Installation Guide from the Cellocator Knowledge Base. CelloSense\LV-760 Product Overview Page 20 of 19 Copyright 2022 by PowerFleet Inc. CelloSense\LV-760 Product Overview 5 Technical Specifications Communication Short Range RF BLE 4.1 - 2.4GHz wireless communication Power Output 8mW Interfaces Accelerometer 3D, 2g/8g range, 12 Bit representation, 1mg / 4mg resolution Vibration sensing with programmable threshold Free-fall sensing with programmable threshold Impact sensing with threshold up to 8g Power Current Consumption Transmission pulse: 23mA Active connection with hub (Avg): <250uA All sensors active and logging: <60uA Hibernation: <10uA Internal Battery ER14505 primary battery, 3.6V Lithium-Thionyl Chloride, AA size, 2500mAh Sensors Temperature Typical accuracy:
0C to 85C: 0.5C
-25C to 0C: 1.0 C
-30C to -25C: 2.0 C Resolution: 0.1C Open/Close door 10-20mm range from the defined permanent magnet Free fall / Impact /
Motion Free fall detection with programmable threshold Impact with threshold up to 8g Motion detection with programmable threshold Environment Temp, operation
-30C to +85C Temp, storage
-40C to +85C Ingress Protection IP69K Vibration, Impact Shock resistance according to EN 60068-2-27, Vibration according to EN 12830 CelloSense\LV-760 Product Overview Page 21 of 19 Copyright 2022 by PowerFleet Inc. CelloSense\LV-760 Product Overview Nylon/metal tie-wraps, 2 screws and/or double-sided adhesive. CE (EMC, Safety, R&TTE) FCC part 15 subpart B&C ICES-3 (B)/NMB-3(B) Mounting Certifications CE FCC IC IEC 60529 IP69K Unit passes all relevant IEC 60529 IP69K regulation tests Environmental Unit passes all relevant environmental regulation tests Dimensions & Weight Dimensions 111 x 46.3 x 28.6 mm Weight 90 gr Table 7: CelloSense Specifications CelloSense\LV-760 Product Overview Page 22 of 19 Copyright 2022 by PowerFleet Inc.