FCC ID: ZMI-WCT12W Wire-free charging solutions

PowerKiss Wire-free Charging PowerKiss Hotspot Positioning Guide PowerKiss 2011 2 4 4 4 5 6 6 7 8 9 10 10 11 12 13 13 14 15 16 PowerKiss wire-free charging Ring Heart Processing Technical requirements I Furniture material II Distance from the user Contents III Space required by PowerKiss Heart IV Distance between two Hearts Fine tuning the place for the Hotspot I Optimal place for the Hotspot II Taking adjacent seats into account III The Edges Examples of positioning the PowerKiss Hotspots Round table Conference table A single-user worktable Summary of the requirements 3 PowerKiss wire-free charging Heart The essence of wire-free charging is the To turn a surface into a wire-free charging pairing of Heart and Ring. The Heart is the platform it first needs to be given a Heart. transmitter and the Ring is the receiver Like most, this Heart is also hidden except and together they enable wire-free for a small LED light to indicate that it is charging on almost any surface. ready to charge a mobile device wearing Ring of the charging area, called PowerKiss a Ring. The LED is also the center point Hotspot. Whenever the device with Ring The Ring is a small accessory that is is on this Hotspot, the wire-free charging plugged into handheld devices, such as begins. mobile phones or mp3-players. As soon as the Ring is plugged in, the device is ready to be a part of a wire-free energy transaction. Heart Wire-free Charging Transmitter FCC ID: ZMI-WCT12W Version: 2.1 S/N: A00500 Input: 12 0.2 V DC / 1.0 A / 12 W Use only with power supplies listed in the manual Indoo r use only

I.T.E. 4 Processing As was mentioned in the foreword, the Heart is installed to a piece of furniture. There is a special milling that needs to be done in order to use the Heart properly. Drawings of the milling are presented in pictures below. A 1 4 3 681 A

, 5 0 4 3,5 +0,1 SECTION A-A Technical requirements Also, because of the heating of the I Furniture material PowerKiss Heart and Ring, the material in which the equipment is inserted, should Due to the characteristics of be heat tolerant at 80C. This applies electromagnetic fields, also for the coating material of the PowerKiss wire-free charging surface. equipment should not be inserted into metal surfaces, or other conductive or The PowerKiss Heart is designed to be highly magnetic materials. installed into a piece of furniture with surface thickness of 15-50mm. Furniture material should be Heat tolerant at 80C Target surface thickness of 15-50 mm Not containing metal or conductive material 6 Technical requirements This matter of attention applies to such II Distance from the user special cases as special structures of pieces of furniture and solutions designed Due to the characteristics of to be positioned to the immediate vicinity electromagnetic fields, PowerKiss of the user. Hotspot must not be positioned so that the center of the charging area is continuously closer than 250mm from the user's body in vertical direction and 200mm in horizontal direction. Required distance between user and Hotspot 250mm in vertical direction 200mm in horizontal direction 7 Technical requirements One should also remember that Heart III Space required by PowerKiss Heart must finally be plugged into a power supply, which means that there must also The installation of PowerKiss Heart be space for a power cable. requires a certain amount of space, which should be taken into account before the actual processing of the table. Power supply port Heart dimensions Width: 132mm Length: 162mm Height: 24mm Weight: 135g Hotspot 68 mm 8 Technical requirements IV Distance between two Hearts If the plan is to install several Hearts into a single surface, attention must be paid to their distance from each other. The distance between two Hearts must be at least 300mm. The distances should be measured from the center of the Hotspots. Min. 300mm 9 Fine tuning the place for the Hotspot The goal is to place the Hotspot in a I Optimal place for the Hotspot position where the user can easily reach while also making sure that the area does When it comes to tables, users usually not disturb the primary use of the table place their small devices, such as mobile

(such as eating or work). phones, to the right and front. The recommended centre position of the PowerKiss Hotspot is 400mm to the right of the sitting position and 200mm from the edge of the piece of furniture, as presented in image below. Optimal place for the Hotspot 400mm 200mm 10 Fine tuning the place for the Hotspot II Taking adjacent seats into account Ensure that the Hotspots do not cross to the working areas of another users (in the area of another seating position), If needed, change the distance so that the area will be closer to the centre of the seating position of the user for whom the area is being established. 300mm 300mm 200mm OK!

200mm 400mm 200mm 11 Fine tuning the place for the Hotspot III The Edges The centre of the Hotspot should be positioned so that there would be 200mm minimum distance from the egdes, in order to avoid dropping the devices being charged and to ensure distance between the user and the Hotspot (see page 7). OK!

400mm 200mm 400mm 200mm 12 Examples of positioning the PowerKiss There are a few examples below of tables Hotspots of different shapes and types and related examples of Hotspot positioning.. There are various matters that affect the design of a Hotspot positioning. These include aesthetics, materials, usage and manufacturing procedures. One should always remember that without a proper positioning, the piece of furniture fails to provide its feature of wire-free charging. A completely round table with a diameter of 1,250mm. OK!

200mm 400mm 400mm 200mm 13 A 2,600mm x 1,060mm conference table 530mm 450mm OK!

300mm 200mm 400mm 150mm 300mm 200mm 300mm 200mm 14 A single-user worktable with one Hotspot, dimensions: 2,000mm x 2,500cm OK!

200mm 400mm 15 Summary of the requirements 1. Furniture material requirements Target surface thickness of 15-50 mm Heat tolerant at 80C Not containing metal or other conductive material 2. Required distances (from center of the Hotspot) From the user's body - vertically 250mm From the user's body - horizontally 200mm To another Hotspot 300mm 3. Reserve an area for the installation of the Heart around the Hotspot 4. Place the Hotspot so that it is in front and right of the user. Recommended: 400mm to the right of the center of the sitting position and 200mm from the edge of the piece of furniture 5. Do not place the Hotspot in an area meant for another user or near the edges of the surface 16 17 PowerKiss 2011 www.powerkiss.com info@powerkiss.com

PowerKiss Heart PowerKiss Heart Setup Guide Version 3.1 (ZM1002) PowerKiss 2011 2 PowerKiss Heart With PowerKiss, you represent Setup Guide state-of-the-art technology and design. Imagine getting rid of low Thank you for choosing PowerKiss. batteries and the annoying, tangled PowerKiss technology provides a wires from tabletops at the same simple, efficient and user-friendly time! Step into the future with us. way to keep your dear devices charged. Yours, Maija Itkonen, CEO of PowerKiss 3 Contents Ring Heart PowerKiss wire-free charging Contents of the box Single Heart Double Heart Tools for the installation The milling for the Heart under the furniture surface Introducing the Powerkiss Heart Setup instructions for Powerkiss Heart Technical specifications Regulatory Compliance Information FCC Compliance Statement (United States) EU declaration of conformity European Union - Disposal information Limited manufacturer's warranty for PowerKiss devices STEP I - Placing the Heart STEP II - Attaching the Heart STEP III - Inserting crystal STEP IV - Marking the Hotspot STEP V - Setting the power cables for single Heart STEP VI - Setting the power cables for double Heart STEP VII - Checklist The Heart The Ring Official power supplies 5 5 5 6 6 7 8 9 10 11 11 12 13 14 15 17 19 20 20 20 20 21 21 21 22 22 4 PowerKiss wire-free charging Heart The essence of wire-free charging To turn a surface into a wire-free is the pairing of Heart and Ring. The charging platform it first needs to Heart is the transmitter and the Ring be given a Heart. Like most, this is the receiver and together they Heart is also hidden except for a enable wire-free charging on almost small LED light to indicate that it is any surface. ready to charge a mobile device wearing a Ring. The LED is also Ring the center point of the charging area, called PowerKiss Hotspot. The Ring is a small accessory that Whenever the device with Ring is plugged into handheld devices, is on this Hotspot, the wire-free such as mobile phones or mp3-

charging begins. players. As soon as the Ring is plugged in, the device is ready to be a part of a wire-free energy transaction. 5 Contents of the box Single Heart PowerKiss Heart Power supply:

RS or PhiHong AC power cord Power cable holders & ties Setup &

User Guide Installation kit

(crystal, 4x screw, Hotspot sticker &

Velcro fastener) 6 Contents of the box Double Heart 2x PowerKiss Heart Power supply:

Mascot or PhiHong AC power cord Power cable holders & ties Setup &

User Guide Installation kit

(2x crystal, 8x screw, 2x Hotspot sticker &

2x Velcro fastener) Power split cable The items supplied with your device and available accessories may be different depending on your region or service provider 7 Tools for the installation Power or cordless drill Torx 20 drill bit Wire cutters File 8 The milling for the Heart under the furniture surface A 1 4 3 681 A

, 5 0 4 3,5 +0,1 SECTION A-A FINISH:

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH:

TOLERANCES:

LINEAR:

ANGULAR:

DRAWN NAME tal SIGNATURE DATE 12.1.2011 DEBUR AND BREAK SHARP EDGES 9 DO NOT SCALE DRAWING REVISION PowerKiss Oy PART NUMBER/DESCRIPTION:

Rout out dimensions Introducing the Powerkiss Heart Screw holes Lightguide Coil Screw holes Coil support Power supply port 10 Setup instructions for lightguide goes through the hole Powerkiss Heart in the middle and comes out the STEP I - Placing the Heart other side. Make sure that the coil goes firmly into the round grooved Place Heart in the milled out area out area and is evenly against the of the funiture surface. Push the surface. Heart against the surface so that the When the Heart is connected to a power source, do not touch the coil or electrical components 11 STEP II - Attaching the Heart Use the screws found in the installation kit to fasten the Heart firmly to the surface so that the power supply port is facing away from the closest edge. Power supply port facing away the edge 12 STEP III - Inserting crystal Put the crystal (provided in the installation kit) on top of the Measure the length of the lightguide and press it into the hole. lightguide that stands out from the Make sure that the lightguide goes furniture surface and cut the excess all the way into the crystal. leaving 10mm. Polish the end of the cut lightguide. length max 10 mm 13 STEP IV - Marking the For completing the installation with Hotspot single Heart, continue to page 15. For completing the installation with Attach PowerKiss Hotspot sticker double Heart turn to page 17.

(provided in the Installation package) to mark the charging area. Place it so that it is symmetrically around the center point, PowerKiss logo on the left side. left 90 14 STEP V - Setting the power cables for single Heart Installing only one Heart, attach the AC power cord to a power supply and the power supply to the Hearts power supply port. Use only RS or PhiHong power supplies with single Heart. RS or PhiHong 15 Attach the power cables using velcro fastener to the piece of the cable holders and ties when furniture so that the label of the needed. The power supply (RS or power is visible. PhiHong) should be attached with 16 STEP VI - Setting the power cables for double Heart In the case of setting up two or more Hearts into the same piece of furniture, the underlying procedure is almost the same as with installing one Heart. The difference comes from sharing a power supply

(Mascot or PhiHong) and using a split cable for distributing power. Mascot or PhiHong 17 Attach the power cables using the cable holders and ties. The power supply (Mascot or PhiHong) should be attached with velcro fastener to the piece of furniture so that the label of the power is visible. 18 STEP VII - Checklist Wires Power Always install the cables so that they are firmly and aesthetically Do not attach the power supply to attached to the piece of furniture places where it can be interfered and/or the surroundings and out of with (e.g. let hang, bottom parts the sight when possible of the furniture or clearly visible places) 19 Technical specifications The Heart The Ring Dimensions (LxWxH):

163mm x 132mm x 24mm Dimensions (LxWxH):

43-46mm x 34mm x 7.5mm Power consumption:

Charging 12W (max) Standby 240mW Charging area/Hotspot size:

Width 60mm Height 15mm Official power supplies Power output:

5W (max) Compatibility:

Nokia 2mm Apple MicroUSB Use only power supplies listed here with the PowerKiss system. With one Heart (single):

RS SAW18-12.0-1500 (only within CE or FCC certified areas) or PhiHong PSM36W-120TW (only within areas where CB or FCC certification is required) With two Hearts (double, power divided):

Mascot 2720 0000 40 (only within CE certified area) or PhiHong PSM36W-120TW (only within areas where CB or FCC certification is required) 20 Regulatory Compliance Information FCC Compliance Statement (United States) - FCC Class B Part 15 This device complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference This device must accept any interference received, including interference that may cause undesired operation. See instructions below if radio or television interference is suspected. FCC Compliance Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturers instructions, may cause interference harmful to radio or television reception or radio communication. There is no guarantee, however, that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception or radio communication, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna until the interference stops. Increase the separation between the equipment and the receiver. Connect the equipment an outlet that is on a different circuit from the receiver. Consult the dealer or an experienced radio or TV technician for help. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. EU declaration of conformity Powerkiss Ltd hereby declares that the products PowerKiss Ring (model 11RXX) and PowerKiss Heart (model 2.1) have been designed and manufactured in accordance with the following standards: EN 61000-6-3 (incl. EN 55022), EN 61000-3-2, EN 61000-6-1(incl. EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5), IEC 61000-4-6, EN 61000-4-11, EN 62233 and EN 60950, and conforms to: EMC Directive 2004/108/EC, Health and safety Directive 2004/40/EC, Low Voltage Directive LVD 2006/95/EC, Hazardous substances RoHS Directive 2002/95/EC, Waste Electrical and Electronic Equipment Directive 2002/96/

EC, CE marking Directive 93/68/EEC, Eco-design Directive 2005/32/EC Betonimiehenkuja 5 FIN-02150 ESPOO Finland 23.07.2010 Maija Itkonen, CEO 21 European Union - Disposal information Waste Electrical & Electronic Equipment, applicable in the European Union and other European countries with separate collection systems. This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. power cables and adapters) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. This EEE is compliant with RoHS. The package is recyclable. Limited manufacturer's warranty for PowerKiss devices This Limited Manufacturer's Warranty for PowerKiss devices sold in the European Union, Iceland, Norway, Switzerland, and Turkey is valid as of October, 2011 MANUFACTURER'S LIMITED WARRANTY NOTE! This Limited Warranty does not affect your legal (statutory) rights under your applicable national laws relating to the sale of consumer products. PowerKiss Ltd provides this Limited Warranty to you who have purchased the PowerKiss product(s) included in the sales package ("Product"). PowerKiss Ltd sells its products with the intent that they are free of defects in manufacture and workmanship for twelve (12) months from the date of original purchase by the first end-user. PowerKiss warrants that its products will be free of defects in material and workmanship under normal use and service defined in user guide. This warranty extends only to consumers and does not extend to Retailers. 22 This warranty does not cover normal tear and wear, damage caused by misuse or abuse; accident; indirect accident; the attachment of any unauthorized accessory; usage otherwise than intended to be used;

alteration to the product; improper installation; unauthorized service, repairs or modifications; improper use of electrical/power supply; loss of power; dropped product; malfunction or damage of an operating part from failure to provide manufacturers recommended maintenance; transportation damage; theft; neglect;

vandalism; or environmental out of specs conditions ; loss of use during the period the product is at a repair facility or otherwise awaiting parts or repair; or any other conditions whatsoever that are beyond the control of PowerKiss Ltd This Limited Warranty is only valid and enforceable in the country where you have purchased the Product provided that PowerKiss has intended the Product for sale in that country. However, if you have purchased the Product in a member state of the European Union, Iceland, Norway, Switzerland or Turkey and PowerKiss originally intended the Product for sale in one of these countries, this Limited Warranty is valid and enforceable in all of these above listed countries. How to get warranty service If you wish to make a claim under this Limited Warranty, please return your Product to PowerKiss Ltd When making a claim under this Limited Warranty you will be required to provide:

a) the Product b) the original proof of purchase, which clearly indicates the name and address of the seller, the date and place of purchase, the product type and serial number, when applicable. Other important notices All parts of the Product or other equipment that PowerKiss has replaced shall become the property of PowerKiss. If the Product is found not to be covered by the terms and conditions of this Limited Warranty, PowerKiss reserve the right to charge a handling fee Limitation of PowerKiss's liability This Limited Warranty is your sole and exclusive remedy against PowerKiss and PowerKiss's sole and exclusive liability in respect of defects in your Product. This Limited Warranty replaces all other PowerKiss warranties and liabilities, whether oral, written, (non-mandatory) statutory, contractual, in tort or otherwise, including, without limitation, and where permitted by applicable law, any implied conditions, warranties or other terms as to satisfactory quality or fitness for purpose. However, this Limited Warranty shall neither exclude nor limit i) any of your legal (statutory) rights under the applicable national laws or ii) any of your rights against the seller of the Product. To the extent permitted by applicable law(s) PowerKiss does not assume any liability for loss of or damage to or , for any loss of profit, loss of use of Products or functionality, loss of business, loss of contracts, loss of revenues or loss of anticipated savings, increased costs or expenses or for any indirect loss or damage, consequential loss or damage or special loss or damage. To the extent permitted by applicable law, PowerKisss liability shall be limited to the purchase value of the Product. The above limitations shall not apply in case of gross negligence or intentional misconduct of PowerKiss or in case of death or personal injury resulting from PowerKisss proven negligence. 23 www.powerkiss.com info@powerkiss.com PowerKiss 2011

PowerKiss Wire-free Charging PowerKiss User Guide Version 3.1 (ZM1003) PowerKiss 2011 2 PowerKiss User Guide Thank you for choosing PowerKiss. PowerKiss technology provides a simple, efficient and user-friendly way to keep your dear devices charged. With PowerKiss, you represent state-of-the-art technology and design. Imagine getting rid of low batteries and the annoying, tangled wires from tabletops at the same time!

Step into the future with us. Yours, Maija Itkonen, CEO of PowerKiss 3 Contents Ring Heart 1. My device does not start to charge 2. My device stops charging STEP I: ATTACH THE RING STEP II: PLACE RING ON THE HOTSPOT STEP III: RED MEANS CHARGING PowerKiss wire-free charging How to use PowerKiss wire-free charging How to choose the right Ring for your device Ring and Hotspot indication lights Troubleshooting Useful things to know Safety instructions Technical Specifications Regulatory Compliance Information Limited manufacturer's warranty Correct disposal of this product 1. Safety distances 2. General usage instructions 3. General safety instructions The Ring The Heart Official power supplies FCC Compliance Statement EU declaration of conformity 4 5 5 5 6 6 7 8 9 10 11 11 13 15 16 16 17 18 19 19 19 19 20 20 21 22 23 PowerKiss wire-free charging The essence of wire-free charging is the pairing of Heart and Ring. The Heart is the transmitter and the Ring is the receiver and together they enable wire-free charging on almost any surface. Ring The Ring is a small accessory that is plugged into handheld devices, such as mobile phones or mp3-players. As soon as the Ring is plugged in, the device is ready to be a part of a wire-free energy transaction. Heart To turn a surface into a wire-free charging platform it first needs to be given a Heart. Like most, this Heart is also hidden except for a small LED light to indicate that it is ready to charge a mobile device wearing a Ring. The LED is also the center point of the charging area, called PowerKiss Hotspot. Whenever the device with Ring is on this Hotspot, the wire-free charging begins. Heart Wire-free Charging Transmitter FCC ID: ZMI-WCT12W Version: 2.1 S/N: A00500 Input: 12 0.2 V DC / 1.0 A / 12 W Use only with power supplies listed in the manual Indoo r use only

I.T.E. 5 How to use PowerKiss wire-free charging STEP I: ATTACH THE RING Connect the Ring to your electronic device through the charger connector port. charger port Ring There are different Rings, please confirm that you are using the right model-specific Ring Please confirm that the port you are using for charging is power-enabled, some USB ports do not transfer power The devices without a PowerKiss Ring will not charge on the charging area 6 How to use PowerKiss wire-free charging STEP II: PLACE RING ON THE HOTSPOT Place your device down on the charging area so that the Ring is inside the PowerKiss Hotspot. The indication light of the Hotspot should be visible through the hole of the Ring. white light PowerKiss Hotspot The indication light of the Hotspot should be white before placing the device to charge, if not, please wait for a few seconds for the light to change The installations of PowerKiss system might vary 7 How to use PowerKiss wire-free charging STEP III: RED MEANS CHARGING As the Heart inside the furniture recognizes the Ring, the Hotspots indication light turns from white to red. The charging starts as a red light appears also on the Ring. When the battery is detected to be full, the charging ends. In this situation, the indication light on the Hotspot turns to green and the light on the Ring goes out. In some cases the light remains red if the device is drawing maintenance power. red light The red light on the Ring indicates ongoing charging and the red indication light on the charging area indicates that the Ring has been recognized by the Hotspot (placed correctly) 8 How to choose the right Ring for your device MicroUSB Ring High variety of devices using micro USB connector for charging (mostly smart phones), such as Nokia, Samsung, LG, Sony Ericsson, HTC, BlackBerry and many others Please confirm that the USB port you are using for the charging is power-enabled, some USB ports do not transfer power Nokia Ring High variety of Nokia phones with proprietary Nokia power connector iRing Proprietary Ring for Apple devices with Apple connector, such as iPhones & iPods Check powerkiss.com for the latest information about compatible devices 9 Ring and Hotspot indication lights Hotspot Ring Meaning White light No light Red light No light Charging area ready for use Ring placed correctly on charging area, wait for red light to light on the Ring as a sign of charging Red light Red light Device charging Green light Red light or no light Charging complete Yellow light No light Charging interrupted 10 Troubleshooting 1. My device does not start to charge Please, check the indicator lights on Ring and Hotspot Hotspot Ring Action No light No light White light No light Red light No light Yellow light

(1) No light Hotspot is not active, please, check that the Heart in the table is plugged correctly into a power supply The device is not aligned properly, please follow the instructions in section How to use PowerKiss wire-free charging Ring placed correctly on charging area, wait for red light to light on the Ring as a sign of charging Check the device, if the battery is full, the charg-

ing will not start. Please, remove the device from the Hotspot 11 Hotspot Ring Action Yellow light

(2) No light Yellow light

(3) No light Check your device, if the battery is NOT full, please confirm that you have inserted the right model-

specific Ring to your device, as instructed in the section How to choose the right Ring for your device Check your device, if the battery is NOT full and you have inserted the right model-specific Ring into your device, an interruption in the charging has occured. Please, remove the device from the Hotspot, wait for the white light to appear and re-align the device as instructed in section How to use PowerKiss wire-free charging If the problem persists, try to re-boot your device as instructed by the manufacturer of your device If your devices battery is completely dead and not been used for a long period of time, there is a possibility that it should be charged with its regular charger for initial charge 12 Troubleshooting 2. My device stops charging Please, check the indicator lights on Ring and Hotspot Hotspot Ring Action Green light Red light /

No light Green light No light Yellow light No light Check your device, if the battery is full, please, remove the device from the Hotspot Check your device, if the battery is NOT full, please, remove the device from the Hotspot. Wait for white light to appear on the Hotspot and re-align the device as instructed in section How to use PowerKiss wire-free charging An interruption in the charging has occured. Please, remove the device from the Hotspot, wait for white light to appear and re-align the device as instructed in section How to use PowerKiss wire-

free charging 13 In some cases, the devices internal features may have an effect on the wire-free charging, thus causing breaks in the charging. These features are dependent on the usage rate and age of the particular device If you have constant challenges with a particular device that should be supported by the PowerKiss system, please, contact support@powerkiss.com 14 Useful things to know You may choose to charge more than one device at the same time on the same Hotspot. This is possible but affects the charging rate of the devices The electromagnetic fields emitted by PowerKiss wire-free charging do not alter or damage the information written on magnetic stripes of credit or similar cards To ensure proper charging, the Ring should not be higher than 10mm above the charging area (from surface of the furniture to bottom of the Ring) during the charging process The rate of charging may vary and is dependent on the individual features of the device and its battery, such as rate of usage and age. To speed up the charging process, please switch off all other applications on the device that might require power to operate, such as Wi-Fi search, Bluetooth and active display Confirm that there are no metal objects or objects containing highly magnetic parts on the charging area at any time, they disturbe the power transaction and might affect the operations of the PowerKiss system and the device being charged The device can be used normally during the charging process, with some limitations on applications that rely heavily on radio or magnetic frequencies 15 Safety instructions When using an electrical device, basic precautions should always be followed, including the following instructions 1. Safety distances Maintain at least 25cm vertical and 20cm horizontal separation between PowerKiss wire-free charging area and users body when using the wire-free charging Keep medical appliances, such as pacemakers, hearing aids or other such devices, at least 30cm away from the charging area at any times Keep metal objects or objects containing highly magnetic parts at least 15cm away from the charging area at any times 16 2. General usage instructions Use PowerKiss products only as instructed in official PowerKiss manuals Use PowerKiss Hearts only with official power supplies and only as instructed in technical specifications PowerKiss system emits electromagnetic fields that may interfere in some situations with applications and external accessories using highly sensitive magnetic or radio frequency transmitters. If you confront problems using these applications during wire-free charging, please, take the device from the charging area for the time of the use It is normal for the Ring to become warm during the charging process, use caution when handling the Ring immediately after or during the charging process Do not use PowerKiss wire-free charging for charging damaged or otherwise altered devices Do not use damaged or otherwise altered PowerKiss products Close supervision is necessary when PowerKiss devices are used by or near children or disabled persons 17 3. General safety instructions Do not disassemble or alter in any ways PowerKiss devices due to a risk of electric shock Do not put any stickers or other additional labels or accessories on the Ring Do not place the Ring into water or temperature above 40C Your PowerKiss Heart emits electromagnetic fields that may interfere with unshielded or improperly shielded electronic equipment, such as pacemakers, hearing aids, medical devices, and other electronic devices if they are within 30cm from the charging area. If you have any reason to suspect that your PowerKiss Heart is interfering with another device, unplug the PowerKiss Heart from the power source immediately and contact the manufacturer of the other device for further guidance PowerKiss devices are complex electronic devices protect them from impacts and rough handling to avoid serious damage 18 Technical Specifications The Heart The Ring Dimensions (LxWxH):

163mm x 132mm x 24mm Dimensions (LxWxH):

43-46mm x 34mm x 7.5mm Power consumption:

Charging 12W (max) Standby 240mW Charging area/Hotspot size:

Width 60mm Height 15mm Power output:

5W (max) Compatibility:

Nokia 2mm Apple MicroUSB Official power supplies Use only power supplies listed below with Hearts. With one Heart (single):

RS SAW18-12.0-1500 (only within CE or FCC certified areas) or PhiHong PSM36W-120TW (only within areas where CB certification or FCC is required) With two Hearts (double, power divided):

Mascot 2720 0000 40 (only within CE certified area) or PhiHong PSM36W-120TW (only within areas where CB or FCC certification is required) 19 Regulatory Compliance Information FCC Compliance Statement (United States) - FCC Class B Part 15 This device complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference This device must accept any interference received, including interference that may cause undesired operation. See instructions below if radio or television interference is suspected. FCC Compliance Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturers instructions, may cause interference harmful to radio or television reception or radio communication. There is no guarantee, however, that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception or radio communication, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna until the 20 interference stops. Increase the separation between the equipment and the receiver. Connect the equipment an outlet that is on a different circuit from the receiver. Consult the dealer or an experienced radio or TV technician for help. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. EU declaration of conformity Powerkiss Ltd hereby declares that the products PowerKiss Ring (model 11RXX) and PowerKiss Heart (model 2.1) have been designed and manufactured in accordance with the following standards: EN 61000-6-3 (incl. EN 55022), EN 61000-3-2, EN 61000-6-1(incl. EN 61000-4-2, EN 61000-4-3, EN 61000-4-

4, EN 61000-4-5), IEC 61000-4-6, EN 61000-4-11, EN 62233 and EN 60950, and conforms to: EMC Directive 2004/108/EC, Health and safety Directive 2004/40/EC, Low Voltage Directive LVD 2006/95/EC, Hazardous substances RoHS Directive 2002/95/EC, Waste Electrical and Electronic Equipment Directive 2002/96/EC, CE marking Directive 93/68/EEC, Eco-design Directive 2005/32/EC Betonimiehenkuja 5 FIN-02150 ESPOO Finland 23.07.2010 Maija Itkonen, CEO 21 Limited manufacturer's warranty for PowerKiss devices This Limited Manufacturer's Warranty for PowerKiss devices sold in the European Union, Iceland, Norway, Switzerland, and Turkey is valid as of October, 2011 MANUFACTURER'S LIMITED WARRANTY NOTE! This Limited Warranty does not affect your legal (statutory) rights under your applicable national laws relating to the sale of consumer products. PowerKiss Ltd provides this Limited Warranty to you who have purchased the PowerKiss product(s) included in the sales package ("Product"). PowerKiss Ltd sells its products with the intent that they are free of defects in manufacture and workmanship for twelve (12) months from the date of original purchase by the first end-user. PowerKiss warrants that its products will be free of defects in material and workmanship under normal use and service defined in user guide. This warranty extends only to consumers and does not extend to Retailers. This warranty does not cover normal tear and wear, damage caused by misuse or abuse;

accident; indirect accident; the attachment of any unauthorized accessory; usage otherwise than intended to be used; alteration to the product; improper installation; unauthorized service, repairs or modifications; improper use of electrical/power supply; loss of power; dropped product; malfunction or damage of an operating part from failure to provide manufacturers recommended maintenance; transportation damage; theft; neglect; vandalism; or environmental out of specs conditions ; loss of use during the period the product is at a repair facility or otherwise awaiting parts or repair; or any other conditions whatsoever that are beyond the control of PowerKiss Ltd This Limited Warranty is only valid and enforceable in the country where you have purchased the Product provided that PowerKiss has intended the Product for sale in that country. However, if you have purchased the Product in a member state of the European Union, Iceland, Norway, Switzerland or Turkey and PowerKiss originally intended the Product for sale in one of these countries, this Limited Warranty is valid and enforceable in all of these above listed countries. How to get warranty service If you wish to make a claim under this Limited Warranty, please return your Product to PowerKiss Ltd When making a claim under this Limited Warranty you will be required to provide:

a) the Product b) the original proof of purchase, which clearly indicates the name and address of the seller, the date and place of purchase, the product type and serial number, when applicable. Other important notices All parts of the Product or other equipment that PowerKiss has replaced shall become the property of PowerKiss. If the Product is found not to be covered by the terms and conditions of this Limited Warranty, PowerKiss reserve the right to charge a handling fee 22 Limitation of PowerKisss liability This Limited Warranty is your sole and exclusive remedy against PowerKiss and PowerKisss sole and exclusive liability in respect of defects in your Product. This Limited Warranty replaces all other PowerKiss warranties and liabilities, whether oral, written, (non-mandatory) statutory, contractual, in tort or otherwise, including, without limitation, and where permitted by applicable law, any implied conditions, warranties or other terms as to satisfactory quality or fitness for purpose. However, this Limited Warranty shall neither exclude nor limit i) any of your legal (statutory) rights under the applicable national laws or ii) any of your rights against the seller of the Product. To the extent permitted by applicable law(s) PowerKiss does not assume any liability for loss of or damage to or , for any loss of profit, loss of use of Products or functionality, loss of business, loss of contracts, loss of revenues or loss of anticipated savings, increased costs or expenses or for any indirect loss or damage, consequential loss or damage or special loss or damage. To the extent permitted by applicable law, PowerKisss liability shall be limited to the purchase value of the Product. The above limitations shall not apply in case of gross negligence or intentional misconduct of PowerKiss or in case of death or personal injury resulting from PowerKisss proven negligence. Correct disposal of this product Waste Electrical & Electronic Equipment, applicable in the European Union and other European countries with separate collection systems. This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. power cables and adapters) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. This EEE is compliant with RoHS. The package of the product is recyclable. 23 PowerKiss 2011 www.powerkiss.com info@powerkiss.com