FCC ID: 2AITNWAVE wifi extender

Portable 2.4G/5G WIFI Extender

What’s included?

- Wave WIFI Extender Unit

- USB Power Cable

- Instruction Manual

Setting up Wave

Powering up Wave

1) Plug in the USB Power Cable into Wave (micro-USB port) and plug the USB end into a power

source.

This could be a USB power adapter, PC/laptop, USB charger or hub, etc.

The power source must be able to output atleast 1.0 ampt. Wave will automatically turn on.

Connecting your smartphone/tablet/laptop devices

Method 1: WPS

If your modem/router supports WPS connectivity, you can connect Wave to your network quickly

and easily

1) Press on the WPS button on Wave

2) Press on the WPS button on your modem/router. They will securely communicate with each

other and connect.

Method 2: Connect via Wave Setup

Alternatively, you can setup Wave using your device’s web browser.

1) With Wave turned on, connect to Wave’s WIFI signal “Wave by PowerStick”

2) Open up a web browser (Chrome, Safari, Firefox, etc.)

3) In the address bar, type in “setup.wave.net” and press return

4) You will be taken to Wave’s login screen. The default admin password is: “admin” (without the

quotations). Note: You can change this password in the Advanced Settings later. If you forget

your password you can use a pin to press the reset button (RST) located on the Wave unit.

5) Once you are logged in, tap on 2.4G or 5G, depending on which frequency you would like to

extend.

6) Wave will automatically scan for all WIFI networks close by

7) Once you you see the WIFI network that you want to extend, tap Select and your WIFI

information will auto-populate the fields.

8) Type in the WIFI password for your WIFI network and tap Apply.

9) Wave will begin extending your WIFi, Do not turn off your device until it is complete.

10) Wave will create a new WIFI name for each band that is being extended. (-2.4G-EXT and

-5G-EXT will be added to the end of the main WIFI network)

11) Your WIFI is now being extended! Go to your device’s WIFI settings to connect to the new

extended WIFI signals. The password will be the same as your original WIFI network’s password.

12) Enjoy your extended WIFI network!

Advanced Settings

Change Wave Password

- you can change the default password to secure your Wave settings

Wave Settings

- you can change the settings of the extended WIFI network such as passwords and encryption

type

Firmware Upgrade

- we are constantly working on improving Wave and from time-to-time will release upgrades to the

firmware

- you can find the latest upgrades at https://powerstick.com/main/contact-us/

Restart

- if you are having any minor issues you can try restarting the Wave device to see if it helps

Reset

- if you are setting up another network or giving your Wave to someone else, you can reset Wave

and this will remove all the settings and information that you had previously input.

FCC Warning

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed

and operated with minimum distance between 20cm the radiator your body: Use only the supplied

antenna.

FCC ID: 2AITNWAVE

Troubleshooting

Problem: I forgot my Wave login password.

Solution: With Wave powered on, find a small pin and insert it into the Reset hole (RST) located

on wave. This will do a factory reset and return all settings to default.

Problem: I plugged in Wave but it is not powering on.

Solution: Make sure that you have plugged Wave into a power source with atleast 1.0 amp of

output.

Powerstick .com Inc Agent Authorization Company: Powerstick .com Inc Address: 29 Camelot Drive, Ottawa ,Ontario, Canada, K2G 5W6 Product Name: wifi extender Model Number(s): 805600 Product Description: wifi extender We authorize MiCOM Labs Inc.,575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

John Zhu Title:

Manager Company: Powerstick .com Inc Date: 2021/02/02

Powerstick .com Inc Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2021/02/02 Subject; Request for Confidentiality FCC ID: 2AITNWAVE To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description FCC_Software_Security_Requirements_for_UNII_devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: John Zhu Title: Manager Email: john@powerstick.com

Powerstick .com Inc FCC Software Configuration Control Declaration Date: February 3, 2021 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: wifi extender / 805600 Regarding FCC Country Code Selection guidelines identified in KDB 594280D01v02r01. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: John Zhu Title: Manager Signature of applicant Date: 2021/02/02 FCC Software Configuration Control Declaration Rev1.1.docx