all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
INSTRUCTION MANUAL | Users Manual | 29.79 KiB | ||||
1 |
|
PHOTOS OF EUT BOARD | Internal Photos | 78.03 KiB | ||||
1 |
|
PHOTOS OF EUT | External Photos | 32.14 KiB | ||||
1 |
|
PLACE AND SHAPE OF ID LABEL EUT | ID Label/Location Info | 53.95 KiB | ||||
1 |
|
BLOCK DIAGRAM OF EUT | Block Diagram | 73.38 KiB | ||||
1 |
|
DESCRIPTION OF EUT OPERATING FUNCTIONS | Operational Description | 3.85 KiB | ||||
1 |
|
ELECTRICAL SCHEME AND LAYOUT OF EUT BOARD | Schematics | 194.82 KiB | ||||
1 |
|
LIST OF COMPONENTS OF EUT | Parts List/Tune Up Info | 5.76 KiB | ||||
1 |
|
PHOTOS OF TEST SETUP | Test Setup Photos | 144.93 KiB | ||||
1 |
|
test report | Test Report | 311.76 KiB |
1 | INSTRUCTION MANUAL | Users Manual | 29.79 KiB |
MRRE ENGLISH MRRE_V0 CAUTION FOR THE USER Any change or modification of the product is forbidden if not expressly approved by the manufacturer 0. DESCRIPTION The MRRE receiver was designed to be connected to access control central units as a radio reader. The code received from the transmitter is re-sent to the output terminals according to the format and protocol selected by means of the programming dip-switches. The formats available at the output are those most commonly used in access control systems. 1. TECHNICAL FEATURES Reception frequency Output code format Code Power supply Average consumption Signalling devices 433.92 MHz Wiegand, Dataclock, TTL, RS232 Digital 12 24 V ac/dc 30 mA red LED 2. SELECTION OF OUTPUT FORMAT AND PROTOCOL WIEGAND 30 bit PRASTEL 37 bit HID 26 bit INDALA 26 bit without site code DATA CLOCK Standard ISO track 2:
start sentinel + 16 digits +
end sentinel Standard ISO track 2:
start sentinel + 16 digits +
separator +end sentinel +
LRC TTL RS232 9600 baud, 8 bit, no parity, 1 stop Member of:
Associated MRRE CHANNEL ADDRESS ENGLISH MRRE_V0 The MRRE receiver can be operated by one or more pushbuttons of the transmitters by means of the channel address dip-switches (see figure) OUTPUT LEVEL SELECTION A jumper on the circuit (see figure) makes it possible to select the level of the output signals in the Wiegand, Dataclock and TTL formats. Vout = 12 V Vout = 5 V CONNECTIONS 24 GND 12 D0 D1 GND EN
-
ANT 24 V ac/dc power supply Ground 12 V ac/dc power supply Data output:
Wiegand: DATA0 Data Clock: DATA TTL: DATA RS232: not used Data output:
Wiegand: DATA1 Data Clock: CLOCK TTL: NOT USED RS232: not used Ground Enable contact Antenna shield Antenna The EN terminal must be connected to GROUND to enable the receiver.
+ - +
24 GND 12 D1 D0 GND EN ANT Member of:
Associated MRRE ENGLISH MRRE_V0 Channel address Output format and protocol selection Output level selection RS232 output connector FCC ID: ON3MRRE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Member of:
Associated
1 | PHOTOS OF EUT BOARD | Internal Photos | 78.03 KiB |
FCC ID : ON3MRRE Internal Photos Fig. 1 Controller Board - Components side Pag. 1 FCC ID : ON3MRRE Internal Photos Fig. 2 Controller Board - Foil side Pag. 2
1 | PHOTOS OF EUT | External Photos | 32.14 KiB |
FCC ID : ON3MRRE External Photos Fig. 1 Front view Pag. 1 FCC ID : ON3MRRE External Photos Fig. 2 Rear view Pag. 2
1 | PLACE AND SHAPE OF ID LABEL EUT | ID Label/Location Info | 53.95 KiB |
FCC ID : ON3MRRE ID label / Location info PRODUCT LABELING Figure 1 FCC ID Label FCC ID: ON3MRRE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)
(2) including interference that may cause undesired operation This device may not cause harmful interference, and this device must accept any interference received, Pag. 1 Figure 2 Location of the Label on EUT FCC ID : ON3MRRE ID label / Location info Pag. 2
1 | BLOCK DIAGRAM OF EUT | Block Diagram | 73.38 KiB |
BLOCK DIAGRAM(S) OF THE EUT FCC ID : ON3MRRE Block diagram Block Diagram Description The Controller Board of the EUT is provided with:
- ceramic resonator X1 = 4 MHz Contained in PL118 radio module:
- SAW resonator SAW2 = 423.22 MHz
- Ceramic filter 10.7 MHz Pag. 1 Fig. 1 - Block Diagram of the EUT FCC ID : ON3MRRE Block diagram IN THE FOLLOWING PAGES YOU CAN FIND ALL THE INFORMATION ABOUT THE RADIO MODULE (PL118) WHICH IS INSERTED IN THE RECEIVER Pag. 2 PL118 electrical scheme FCC ID : ON3MRRE Block diagram Pag. 3 PL118 circuit layout FCC ID : ON3MRRE Block diagram Pag. 4 FCC ID : ON3MRRE Block diagram PL118 part list
|----------------------------------------------------------------------------------------------------------------------------------------------------------|
|Bill Of Materials for L9024F1.sch on Mon Mar 22 11:53:29 1999 |
|----------------------------------------------------------------------------------------------------------------------------------------------------------|
|Item|Qty |Ref. |Prastel Code |Name |Value |Tol. |Description |
|----+-----+-----------------------------+----------------+--------------------+------------+------+-------------------------------------------------------|
|1 |1 |A2 | |Manifacturing | | |Manufacturing |
|2 |1 |A1 | |NOTE | | |Row Pitch, Dimension See Sample |
|3 |1 |C24 |C10PCS |CSMD |10pF |NP0 |Ceramic Capacitor 0805 SMT |
|4 |1 |C17 |C12PCS |CSMD |12pF |NP0 |Ceramic Capacitor 0805 SMT |
|5 |5 |C3-4 C6-8 |C1N0CS |CSMD |1nF |Z5U |Ceramic Capacitor 0805 SMT |
|6 |1 |C14 |C1P5CS |CSMD |1p5F |Z5U |Ceramic Capacitor 0805 SMT |
|7 |3 |C9 C13 C26 |C2M2V10S |CSMD |2M2F10V | |Tantalum Capacitor CaseA SMT |
|8 |1 |C11 |C2P2CS |CSMD |2p2F |NP0 |Ceramic Capacitor 0805 SMT |
|9 |1 |C16 |C2P7CS |CSMD |2p7F |NP0 |Ceramic Capacitor 0805 SMT |
|10 |1 |C15 |C33PCS |CSMD |33pF |NP0 |Ceramic Capacitor 0805 SMT |
|11 |1 |C23 |C5P6CS |CSMD |5p6F |NP0 |Ceramic Capacitor 0805 SMT |
|12 |2 |C1-2 |C8P2CS |CSMD |8p2F |NP0 |Ceramic Capacitor 0805 SMT |
|13 |9 |C5 C10 C12 C18-22 C27 |CM10CS |CSMD |100nF |Z5U |Ceramic Capacitor 0805 SMT |
|14 |1 |C25 |CN22CS |CSMD |220pF |X7R |Ceramic Capacitor 0805 SMT |
|15 |1 |Z1 |CSL422-2 |L422-2 |0.8mm/35um | |PCB Double Side 18 x 48.5 mm |
|16 |1 |D1 |D4148S |LL4148 | | |Signal Diode SOD80 SMT |
|17 |3 |L1 L3 L5 |I15NHST5 |LSMD |15nH |5% |Inductor SIMID02 SMT |
|18 |1 |L4 |I5UH6ST5 |LSMD |5M6H |5% |Inductor SIMID02 SMT |
|19 |1 |U2 |ICLM358S |LM358 | | |Dual Op Amp 8pin SMT |
|20 |1 |U1 |ICNE615D |NE615D | | |Low Power FM IF System SMT |
|21 |1 |R12 |R10KS |RSMD |10K |5% |Resistor 0805 SMT |
|22 |2 |R1-2 |R1K5S |RSMD |1K5 |5% |Resistor 0805 SMT |
|23 |1 |R7 |R22KS |RSMD |22K |5% |Resistor 0805 SMT |
|24 |1 |R6 |R27KS |RSMD |27K |5% |Resistor 0805 SMT |
|25 |1 |R8 |R2K2S |RSMD |2K2 |5% |Resistor 0805 SMT |
|26 |3 |R4 R10 R13 |R56KS |RSMD |56K |5% |Resistor 0805 SMT |
|27 |1 |R5 |R56RS |RSMD |56 |5% |Resistor 0805 SMT |
|28 |1 |R3 |R82KS |RSMD |82K |5% |Resistor 0805 SMT |
|29 |1 |X1 |RISCER8 |SFECA10.7MA5-A | | |Ceramic Filter 10.7 MHz |
|30 |1 |SAW2 |RISSAW4 |R2531 | | |SAW Resonator 423.22 MHz |
|31 |2 |R9 R11 |RM10S |RSMD |100K |5% |Resistor 0805 SMT |
|32 |1 |SC1 |SCPL118 | | | |Shield |
|33 |1 |J1 |STRIPPIN(15P) |518-0718-0-42-111 | | |Soldering Terminals SIL 15P Center 2.54mm |
|34 |3 |Q1-3 |TBFS17 |BFS17 | | |NPN Small Signal Transistor SOT23 SMT |
|----------------------------------------------------------------------------------------------------------------------------------------------------------|
Pag. 5 PL118 block diagram FCC ID : ON3MRRE Block diagram Pag. 6
1 | DESCRIPTION OF EUT OPERATING FUNCTIONS | Operational Description | 3.85 KiB |
FCC ID : ON3MRRE Operational description GENERAL INFORMATION Product Description EUT is a receiver designed to be connected to access control central unit as a radio reader; it works on 433.920 MHz frequency. The code received from the transmitter is re-sent to the output terminals according to the format and protocol selected by means of the programming dip-switches. The formats available at the output are those most commonly used in access control systems. It is provided with an antenna connector to be used with the wire antenna provided or with an external antenna. Pag. 1
1 | ELECTRICAL SCHEME AND LAYOUT OF EUT BOARD | Schematics | 194.82 KiB |
MRRE electrical scheme FCC ID : ON3MRRE Schematics Pag. 1 MRRE circuit layout FCC ID : ON3MRRE Schematics Pag. 2 FCC ID : ON3MRRE Schematics Pag. 3 FCC ID : ON3MRRE Schematics Pag. 4 MRRE block diagram FCC ID : ON3MRRE Schematics Pag. 5
1 | LIST OF COMPONENTS OF EUT | Parts List/Tune Up Info | 5.76 KiB |
MRRE part list FCC ID : ON3MRRE Part List
|----------------------------------------------------------------------------------------------------------------------------------------------------------|
|Bill Of Materials for L9033A1.sch on Tue Sep 07 14:00:38 1999 |
|----------------------------------------------------------------------------------------------------------------------------------------------------------|
|Item|Qty |Ref. |Prastel Code |Name |Value |Tol. |Description |
|----+-----+-----------------------------+----------------+--------------------+------------+------+-------------------------------------------------------|
|1 |1 |J3 | |Soldering Terminals | | | |
| | | | |10p | | | |
|2 |1 |JP1 | |JP4F OPT | | |Female Strip 4P 2.54 |
|3 |1 |A1 | |Manifacturing | | |Manufacturing |
|4 |4 |C9-10 C12 C14 |C10NC |CCE |10nF |Z5U |Ceramic Capacitor |
|5 |6 |C1-5 C8 |C1MV35 |CEV |1MF35V | |Vertical Electrolytic Capacitor |
|6 |2 |C11 C13 |C220V35 |CEV |220MF35V | |Vertical Electrolytic Capacitor |
|7 |3 |C6-7 C15 |CM10C |CCE |100nF |Z5U |Ceramic Capacitor |
|8 |1 |J1 |CONDB9F90 |DB9F90 | | |Female D Type Connector 9P 90 |
|9 |1 |Z1 |CSL382-1 |L382-1 |1.6mm/35um | |PCB Double Side 95 X 100 mm |
|10 |3 |D2-4 |D4007 |1N4007 | | |Rectifier Diode |
|11 |1 |D1 |D4148 |1N4148 | | |Signal Diode |
|12 |1 |DZ1 |D5V1W2 |DZ |5V1 | |Zener 1/2W |
|13 |3 |SW1-3 |DIP4 |DIP-SW4 | | |4 Contacts Vertical D.I.L. Switch |
|14 |1 |LD1 |DLED3R |LED03R | | |LED Diameter 3mm Red |
|15 |2 |F1-2 |FUSA25R |R3-RXE-025 | | |MultiFuse 250mA |
|16 |1 |L1 |IA02 |IA02 | | |Air Inductor for Antenna |
|17 |1 |U1 |IC232 |MAX232 | | |Drivers/Receiver RS-232 |
|18 |1 |U5 |IC78L05 |LM78L05 | | |Voltage Regulator |
|19 |1 |U4 |IC78L12 |LM78L12 | | |Voltage Regulator |
|20 |1 |U6 |IC93C66 |NMC93C66N | | |256-Bit Serial EEPROM |
|21 |1 |U3 |ICPL114 |PL114 | | |433MHz Receiver SIL Hybrid Circuit with Filter |
|22 |1 |U2 |ICPL773AP1 |PL773A | | |4 BIT Microcontroller |
|23 |1 |J2 |MS09B |MKDS3/9-5.08 | | |Terminal 9P |
|24 |3 |R9 R11 R15 |R10KW4 |RES |10K |5% |Resistor Carbon 1/4W |
|25 |2 |R4-5 |R1K0W4 |RES |1K |5% |Resistor Carbon 1/4W |
|26 |1 |R14 |R47KW4 |RES |47K |5% |Resistor Carbon 1/4W |
|27 |1 |RR1 |R47KW4R8 |RR |47K |5% |Resistor Array 8+1 |
|28 |2 |R6 R10 |R47RW4 |RES |47 |5% |Resistor Carbon 1/4W |
|29 |1 |R16 |R4K7W4 |RES |4K7 |5% |Resistor Carbon 1/4W |
|30 |1 |R12 |R56R1W |RES |56 1W |5% |Resistor Carbon 1W |
|31 |3 |R1-3 |R5K6W4 |RES |5K6 |5% |Resistor Carbon 1/4W |
|32 |1 |X1 |RISCER4 |CST4MGW |4MHz | |Ceramic Resonator |
|33 |2 |R7-8 |RK56W4 |RES |560 |5% |Resistor Carbon 1/4W |
|34 |1 |R13 |RM10W4 |RES |100K |5% |Resistor Carbon 1/4W |
|35 |1 |JP2 |STRIPTP3P |JP3M | | |Male Strip 3P 2.54 |
|36 |3 |Q1-3 |TBC237 |BC237B | | |NPN Small Signal Transistor |
|37 |5 |TP1-5 |TPOINT |TP | | |Test-Point |
|----------------------------------------------------------------------------------------------------------------------------------------------------------|
Pag. 1
1 | PHOTOS OF TEST SETUP | Test Setup Photos | 144.93 KiB |
FCC ID : ON3MRRE Test Setup Photos Test Setup Photos CONDUCTED MEASUREMENT PHOTOS Pag. 1 RADIATED MEASUREMENT PHOTOS FCC ID : ON3MRRE Test Setup Photos Pag. 2
1 | test report | Test Report | 311.76 KiB |
Test Report No. RD99/167 FCC ID: ON3MRRE Date November 2nd, 1999 MEASUREMENT/TECHNICAL REPORT PRASTEL FCC ID: ON3MRRE November 2nd, 1999 This report concerns (check one): Original grant __X__ Class II change____ Equipment type: RECEIVER (ex.: computer, printer, modem, etc.) Deferred grant request per 47 CFR 0.457(d)(1)(ii)? yes _____ no __X__ If yes, defer until: ______________ date Company Name agrees to notify the Commission by ______________ date of the intended date of announcement of the product so that the grant can be issued on that date. Report prepared by: P.Antonio VELO Giuseppe MECCHIA TV QSL srl Via Montalenghe 12 10010 Scarmagno ( TO ) Italy Phone : 0125 - 525441 Phone : 0125 525440 Fax : 0125 525499 TV QSL 1/24 Test Report No. RD99/167 FCC ID: ON3MRRE Date November 2nd, 1999 Table of Contents Page 1 GENERAL INFORMATION ........................................................ 3 1.1 Product Description ........................................................ 3 1.2 Related Submittal(s)/Grant(s).......................................... 3 1.3 Tested System Details..................................................... 4 1.4 Test Methodology ............................................................ 5 1.5 Test Facility ..................................................................... 5 1.6 Test Equipment List......................................................... 5 2 PRODUCT LABELING................................................................ 6 Figure 2.1 FCC ID Label ....................................................... 6 Figure 2.2 Location of the Label on EUT............................... 7 3 SYSTEM TEST CONFIGURATION ............................................ 8 3.1 Justification...................................................................... 8 3.2 EUT Exercise Software.................................................... 8 3.3 Special Accessories ........................................................ 9 3.4 Equipment Modifications ................................................. 9 3.5 Configuration of the Tested System ................................ 10 Figure 3.1 Configuration of the Tested System...................... 10 4 BLOCK DIAGRAM(S) OF THE EUT.. ......................................... 11 4.1 Block Diagram Description ............................................... 11 Figure 4.1 Block Diagram of the EUT.................................... 12 5 CONDUCTED AND RADIATED MEASUREMENT PHOTOS..... 13 6 CONDUCTED EMISSION DATA ................................................ 14 7 RADIATED EMISSION DATA..................................................... 15 7.2 Field Strength Calculation ............................................... 16 8 PHOTOS OF TESTED EUT ....................................................... 17-23 User Manual (Draft Edition) ...............................................................24-Attached TV QSL 2/24 Test Report No. RD99/167 FCC ID: ON3MRRE Date November 2nd, 1999 1 GENERAL INFORMATION 1.1 Product Description EUT is a receiver designed to be connected to access control central unit as a radio reader; it works on 433.920 MHz frequency. The code received from the transmitter is re-sent to the output terminals according to the format and protocol selected by means of the programming dip-switches. The formats available at the output are those most commonly used in access control systems. It is provided with an antenna connector to be used with the wire antenna provided or with an external antenna. 1.2 Related Submittal(s)/Grant(s) None TV QSL 3/24 Test Report No. RD99/167 FCC ID: ON3MRRE Date November 2nd, 1999 1.3 Tested System Details The FCC IDs for all equipment, plus descriptions of all cables used in the tested system (including inserted cards, which have grants) are:
FCC ID Model &
Serial No.
-----------------------------------------------------------------------------------------------------------
MRRE (1) s/n EMC-99-0277 Unshielded power cord Unshielded signal cable Cable Descriptions ON3MRRE Description Receiver Comelit 542024T s/n 408390 ANT/433SD M/2000 E s/n none none none none AC adapter Unshielded power cord External antenna Coax cable Access control unit Unshielded power cord GVC GREEN753 s/n GND967190060 DK4GREEN753 Notebook ILAN F1560-P s/n 9602 none AC adapter for notebook Unshielded signal cable Unshielded power cord Unshielded signal cable Unshielded power cords DM 119 s/n 3031602 DYKDM119 Printer, parallel I/F Unshielded power cord Shielded signal cable
(1) EUT submitted for grant. TV QSL 4/24 Test Report No. RD99/167 FCC ID: ON3MRRE Date November 2nd, 1999 1.4 Test Methodology Both conducted and radiated testing were performed according to the ANSI C63.4-1992 test procedures . Radiated testing was performed at an antenna to EUT distance of 3 meters. 1.5 Test Facility TV QSL test site No. 3 (semi-anechoic chamber) The semi-anechoic chamber test site and conducted measurement facility used to collect the radiated data are located at Via Montalenghe 12, Scarmagno, Italy. This site has been fully described in a report dated March 25, 1997 submitted to your office, and accepted in a letter dated August 4, 1997 (31040/SIT-1300F2). 1.6 Test equipment list:
Test receiver LISN Test receiver/spectrum anal. Biconical antenna Log-periodic antenna Spectrum analyzer Horn antenna Rohde & Schwarz ESH3 Schwarzbeck NNLA8120 HP 8568B+QP adapter Tensor 4104 Electro-metrix LPA-25 HP 8562A EMCO 3115 s/n 881364/012 s/n 8120399 s/n 2601A02134 s/n 2222 s/n 1117 s/n 3043A05627 s/n 3572 TV QSL 5/24 Test Report No. RD99/167 FCC ID: ON3MRRE Date November 2nd, 1999 2 PRODUCT LABELING Figure 2.1 FCC ID Label FCC ID: ON3MRRE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)
(2) including interference that may cause undesired operation This device may not cause harmful interference, and this device must accept any interference received, TV QSL 6/24 Test Report No. RD99/167 FCC ID: ON3MRRE Date November 2nd, 1999 Figure 2.2 Location of the Label on EUT TV QSL 7/24 Test Report No. RD99/167 FCC ID: ON3MRRE Date November 2nd, 1999 3 SYSTEM TEST CONFIGURATION 3.1 Justification The EUT was configured for testing in a typical fashion (as a customer would normally use it). In order to simulate a real application, an access control central unit has been connected to its output; this has been done by connecting terminals D0, D1 and Ground of MRRE with the corresponding ones on the M2000E. An external AC adapter (commercial type) supply the 24Vdc necessary for receiver and central unit operation. The RS232 port has been connected to a Personal Computer (Notebook). A typical signal, sufficient to stabilize the local oscillator of EUT, has been provided and supplied to EUT by an antenna in the close proximity. Both the wire and the external ANT/433SD antennas has been scanned, final measurements have been carried out with the external antenna connected. Conducted emission tests have been performed on external AC adapter power line cable. 3.2 EUT Exercise Software The EUT exercise program used during radiated and conducted testing was designed to exercise the various system components in a manner similar to a typical use. The signal provided to the antenna of receiver generate an output of data to the access control unit (indicated by flashing leds on it) and to the PC. When the receiver MRRE receives a signal from an admitted transmitter send a frame to a PC through its serial port. The frame is composed by 13 characters having a generic protocol which can be personalized by the end user. Software used: Visual Basic Terminal software. TV QSL 8/24 Test Report No. RD99/167 FCC ID: ON3MRRE Date November 2nd, 1999 3.3 Special Accessories None. EUT is housed in a plastic box. As shown in Figure 3.1 all interface cables used for compliance testing are unshielded as normally supplied by Prastel Company or as readily available on the market. 3.4 Equipment Modifications To achieve compliance to Class B levels, no changes were made during compliance testing. TV QSL 9/24 Test Report No. RD99/167 FCC ID: ON3MRRE Date November 2nd, 1999 3.5 Configuration of the Tested System Figure 3.1 Configuration of the Tested System MRRE M2000E ANT433SD RS 232 CABLE
(cid:29) PERSONAL COMPUTER PRINTER TV QSL 10/24 Test Report No. RD99/167 FCC ID: ON3MRRE Date November 2nd, 1999 4 BLOCK DIAGRAM(S) OF THE EUT 4.1 Block Diagram Description The Controller Board of the EUT is provided with:
- ceramic resonator X1 = 4 MHz Contained in PL118 radio module:
- SAW resonator SAW2 = 423.22 MHz
- Ceramic filter 10.7 MHz TV QSL 11/24 Test Report No. RD99/167 FCC ID: ON3MRRE Date November 2nd, 1999 Fig. 4.1 - Block Diagram of the EUT TV QSL 12/24 Test Report No. RD99/167 FCC ID: ON3MRRE Date November 2nd, 1999 5 CONDUCTED AND RADIATED MEASUREMENT PHOTOS TV QSL 13/24 Test Report No. RD99/167 FCC ID: ON3MRRE Date November 2nd, 1999 6 CONDUCTED EMISSION DATA 6.1 Tests of the worst case configuration. The conducted tests are performed with a receiver in quasi-peak mode. Frequency
(MHz) Measured*
(dBm V) neutral line 0.48 0.58 2.8 11 16.6 22.1 0.48 0.58 2.8 11 16.6 22.1 38 37 46 38 44 38 37 36 47 39 43 39 Limit
(dBm V) 48 48
* All readings are quasi-peak Test Personnel:
Tester Signature ____________________ Date September 29, 1999 Typed/Printed Name Giuseppe MECCHIA . TV QSL 14/24 Test Report No. RD99/167 FCC ID: ON3MRRE Date November 2nd, 1999 7 RADIATED EMISSION DATA 7.1 Tests of the worst case configuration The following data list the significant emission frequencies, measured levels, correction factors (including cable and antenna corrections), the corrected reading, plus the limit. Field strenght calculation is given in paragraph 7.2. Judgement: Passed by 1 dB Frequency
(MHz) Polarity
(V/H) Receiver*
Reading
(dBm V) Correction Factor
(dB/m) Corrected Reading
(dBm V/m) 3 Meter Limit
(dBm V/m) 43.9 114.7 423.2 846.4 1269 1692 V V H V V H 25.2 21.7 24.1 10.5 11.3 10.7 11.8 13 20.9 29 24.2 25.6 37 34.7 45 39.5 35.5 36.3 40 43.5 46 46 54 54
* below 1 GHz readings are quasi-peak, with an IF bandwidth of 120 kHz, above 1 GHz are peak with an IF bandwidth of 1 MHz. Test Personnel:
Tester Signature ____________________ Date October 28, 1999 Typed/Printed Name Giuseppe MECCHIA . TV QSL 15/24 Test Report No. RD99/167 FCC ID: ON3MRRE Date November 2nd, 1999 7.2 Field Strength Calculation 7.2.1 The field strength is calculated by adding the Antenna and Cable Factor to the measured reading. The basic equation with a sample calculation is as follows:
FS = RA + AF + CF where FS = Field Strength RA = Receiver Amplitude AF = Antenna Factor CF = Cable Attenuation Factor Assume a receiver reading of 25.2 dBm V is obtained. The Antenna and Cable Factor of 11.8 is added, giving a field strength of 37 dBm V/m. The 37 dBm V/m value was mathematically converted to its corresponding level in m V/m. FS = 25.2 + 11.8 = 37 dBm V/m Level in m V/m = Common Antilogarithm [(37 dBm V/m)/20]= 70.8 m V/m TV QSL 16/24 Test Report No. RD99/167 FCC ID: ON3MRRE Date November 2nd, 1999 8 PHOTOS OF TESTED EUT Fig. 8.1 Front view Fig. 8.2 Rear view Fig. 8.3 Fig. 8.4 Unit partially disassembled Fig. 8.5 Controller Board - Components side Fig. 8.6 Controller Board - Foil side Front view with cover partially removed TV QSL 17/24 Test Report No. RD99/167 FCC ID: ON3MRRE Date November 2nd, 1999 Fig. 8.1 Front view TV QSL 18/24 Test Report No. RD99/167 FCC ID: ON3MRRE Date November 2nd, 1999 Fig. 8.2 Rear view TV QSL 19/24 Test Report No. RD99/167 FCC ID: ON3MRRE Date November 2nd, 1999 Fig. 8.3 Front view with cover partially removed TV QSL 20/24 Test Report No. RD99/167 FCC ID: ON3MRRE Date November 2nd, 1999 Fig. 8.4 Unit partially disassembled TV QSL 21/24 Test Report No. RD99/167 FCC ID: ON3MRRE Date November 2nd, 1999 Fig. 8.5 Controller Board - Components side TV QSL 22/24 Test Report No. RD99/167 FCC ID: ON3MRRE Date November 2nd, 1999 Fig. 8.6 Controller Board - Foil side TV QSL 23/24 Test Report No. RD99/167 FCC ID: ON3MRRE Date November 2nd, 1999 User Manual TV QSL 24/24 MRRE ENGLISH RD99-167 Any change or modification of the product is forbidden if not expressly approved by the CAUTION FOR THE USER manufacturer 0. DESCRIPTION The MRRE receiver was designed to be connected to access control central units as a radio reader. The code received from the transmitter is re-sent to the output terminals according to the format and protocol selected by means of the programming dip-switches. The formats available at the output are those most commonly used in access control systems. 1. TECHNICAL FEATURES Reception frequency Output code format Code Power supply Average consumption Signalling devices 433.92 MHz Wiegand, Dataclock, TTL, RS232 Digital 12 24 V ac/dc 30 mA red LED 2. SELECTION OF OUTPUT FORMAT AND PROTOCOL WIEGAND 30 bit PRASTEL 37 bit HID 26 bit INDALA 26 bit without site code DATA CLOCK Standard ISO track 2:
start sentinel + 16 digits +
end sentinel Standard ISO track 2:
start sentinel + 16 digits +
separator +end sentinel +
LRC TTL Member of:
Associated MRRE ENGLISH RS232 RD99-167 9600 baud, 8 bit, no parity, 1 stop CHANNEL ADDRESS The MRRE receiver can be operated by one or more pushbuttons of the transmitters by means of the channel address dip-
switches (see figure) A jumper on the circuit (see figure) makes it possible to select the level of the output signals in the Wiegand, Dataclock and TTL formats. OUTPUT LEVEL SELECTION Vout = 12 V Vout = 5 V CONNECTIONS 24 GND 12 D0 D1 GND 24 V ac/dc power supply Ground 12 V ac/dc power supply Data output:
Wiegand: DATA0 Data Clock: DATA TTL: DATA RS232: not used Data output:
Wiegand: DATA1 Data Clock: CLOCK TTL: NOT USED RS232: not used Ground
+ - +
24 GND 12 D1 D0 GND EN ANT Member of:
Associated MRRE EN
-
ANT Enable contact Antenna shield Antenna ENGLISH RD99-167 The EN terminal must be connected to GROUND to enable the receiver. Channel address Output format and protocol selection Output level selection RS232 output connector FCC ID: ON3MRRE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Member of:
Associated
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 1999-12-23 | 433.92 ~ 433.92 | CYY - Communications Receiver used w/Pt 15 Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
1999-12-23
|
||||
1 | Applicant's complete, legal business name |
Prastel S.p.A.
|
||||
1 | FCC Registration Number (FRN) |
0017594326
|
||||
1 | Physical Address |
Via Del Vetraio, 7
|
||||
1 |
Bologna, N/A I-40138
|
|||||
1 |
Italy
|
|||||
app s | TCB Information | |||||
n/a | ||||||
app s | FCC ID | |||||
1 | Grantee Code |
ON3
|
||||
1 | Equipment Product Code |
MRRE
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
A**** G****
|
||||
1 | Title |
R&D Engineer
|
||||
1 | Telephone Number |
39051********
|
||||
1 | Fax Number |
39051********
|
||||
1 |
r******@posta.alinet.it
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | CYY - Communications Receiver used w/Pt 15 Transmitter | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
TUV Italia
|
||||
1 | Name |
G**** M********
|
||||
1 | Telephone Number |
39-01********
|
||||
1 | Fax Number |
39-01********
|
||||
1 |
g******@tuv.it
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | 433.92000000 | 433.92000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC