FCC ID: 2AQWD-HMU200-3G Airplane-mounted aircraft data acquisition and health monitoring unit.

Pratt & Whitney 400 Main Street East Hartford, CT 06118

(860) 565-9743 FAX: (860) 755-5845 To: Cetecom, Inc., Re: PTCRB Project Request 59306 Date: 06/29/2017 Exhibit A7: User Manual for the eFAST product WARNING - PROPRIETARY RIGHTS NOTICE This document is the property of Pratt & Whitney Corp. (P&W). You may not possess, use, copy or disclose this document or any information in it, for any purpose, including without limitation to design, manufacture, or repair parts, or obtain TCCA, FAA or other government approval to do so, without P&W's express written permission. Neither receipt nor possession of this document alone, from any source, constitutes such permission. Possession, use, copying or disclosure by anyone without P&W's express written permission is not authorized and may result in criminal or civil liability. U.S. Export Classification: EAR ECCN 9E991 PRODUCT DESIGNATION:

Manufacturer:

Collins Aerospace & Setrix 400 Main Street East Hartford, CT 06118 eFASTTM (Enhanced, Flight-data, Acquisition, Storage & Transmission) Marketing Name:

Part # / Rev:

FCC ID:

IC_ID:

2AQWD-HMU200-3G 25562-HMU2003G PRODUCT OVERVIEW:

The Health Management Unit (HMU) is a multi-function LRU that is capable of recording full-flight data, performing aircraft/engine condition monitoring, generating reports based on recorded data and offloading the data and reports to a remote ground station. The HMU will be integrated with the aircrafts avionics systems, including the ARINC 664 network, and will be reporting maintenance related data to the Onboard Maintenance System (OMS) and aircraft condition monitoring advisory/info messages to be displayed in the Crew Alerting System. The fundamental function of the HMU is to acquire and record parameters as outlined in the requirements section of this document. Data can be collected from the ARINC 429 and ARINC 664 input ports to be stored in resident non-volatile memory. The user can program reports that will monitor data in real time and trigger at defined conditions to capture data into recordings. The HMU mounts in the forward Avionics Bay. The mounting mechanism is of a tray containing two ARINC 600 style ratchet latches that secure the HMU. The HMU has physical interfaces to the Primary Avionics via ARINC 664 and A429 buses, the electrical system via two DC power buses and a battery bus, the landing gear system via a hardwire discrete, and the Aircraft Network Switch (ANS) via standard Ethernet interface. Pratt & Whitney 400 Main Street East Hartford, CT 06118

(860) 565-9743 FAX: (860) 755-5845 External Components / Accessories:

Page 2 of 4 1. Cellular Antenna Laird Technologies, P/N: CAF 94362 Antenna shall be connected to SMA J4 port on front of eFAST by means of a coaxial cable with provided SMA connectors (straight SMA connectors) 2. Wireless LAN Antenna Sensor Systems Inc., P/N: S65-8280-37 Antenna shall be connected to SMA J5 port on front of eFAST by means of a coaxial cable and provided lightning suppressor attachment. Pratt & Whitney Proprietary U.S. Export Classification: EAR ECCN 9E991 Pratt & Whitney 400 Main Street East Hartford, CT 06118

(860) 565-9743 FAX: (860) 755-5845 3. Wireless LAN Antenna Cable Carlisle Interconnect Technologies, P/N: 311501 Page 3 of 4 4. Cellular Antenna Cable Carlisle Interconnect Technologies, P/N: 311501 5. Optional Wireless LAN Lightning Protector Times Microwave Systems, Product Number: LP-WBX-NMP Pratt & Whitney Proprietary U.S. Export Classification: EAR ECCN 9E991 Pratt & Whitney 400 Main Street East Hartford, CT 06118

(860) 565-9743 FAX: (860) 755-5845 Page 4 of 4 FCC and ISED Cautionary Statements I. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Cet appareil est conforme la partie 15 des rgles de la FCC. Son fonctionnement est soumis aux deux conditions suivantes: (1) Cet appareil ne doit pas provoquer d'interfrences nuisibles, et (2) cet appareil doit accepter toute interfrence reue, y compris les interfrences pouvant entraner un fonctionnement indsirable. II. Changes or modifications not expressly approved by Pratt & Whitney could void the users authority to operate the equipment III. Per RSS GEN 6.8, this radio transmitter (25562-HMU2003G) has been approved by Innovation, Science, and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain / associated cable loss as indicated in the filing. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. a. Laird Technologies IFMULT-SF00 Multi-band MicroSphere antenna b. Sensor Systems VHF/WLA S65-8280-37 Blade antenna IV. To comply with FCC rule parts 2.1091 / ISED RSS 102 RF exposure requirements for mobile transmitting devices, this device and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm (~ 12 inches) from all persons and must not be co-located and/or operating in conjunction with any other antenna or transmitter Pratt & Whitney Proprietary U.S. Export Classification: EAR ECCN 9E991

Pratt & Whitney 400 Main Street East Hartford, CT 06118

(860) 565-9743 FAX: (860) 755-5845 To: Cetecom, Inc., Re: PTCRB Project Request 59306 Date: 12/12/2019 Exhibit A5: Label Product Designation:

Manufacturer:

Collins Aerospace & Setrix 400 Main Street East Hartford, CT 06118 eFASTTM (Enhanced, Flight-data, Acquisition, Storage & Transmission) Marketing Name:

Part # / Rev:

FCC ID:

IC_ID:

2AQWD-HMU200-3G 25562-HMU2003G Label:

FCC ID: 2AQWD-HMU200-3G IC ID: 25562-HMU2003G HVIN: HMU200-1 Label will be a permanent sticker applied to the front cover of the eFAST enclosure during the manufacturing process of the box. Label will measure roughly 1 x 5/8 and be positioned under the Memory Cover USB Connector front plate. This document does not contain any export regulated technical data. Pratt & Whitney 400 Main Street East Hartford, CT 06118

(860) 565-9743 FAX: (860) 755-5845 Page 2 of 2 G 3

0 0 2 U M H D W Q A 2

D I C C F G 3 0 0 2 U M H

2 6 5 5 2

D I C I 1

0 0 2 U M H

I N V H This document does not contain any export regulated technical data.

Subject: Validity of Test Results from Testing / Certification of the Integrated To Whom It May Concern:

Me , 400 Main Street, East Hartford CT, due hereby declare that that the test results from conducted tests applied to the radio modules:

Manufacturer: Gemalto Model: PH8-P FCC ID: QIPPH8-P IC ID: 7830-PH8P which is incorporated in our host equipmen Manufacturer:

Model: HMU200-1 (HW: 3, SW: 1.24) FCC ID:

IC: 25562-HMU2003G and as reported in module test report(s):

Report Number:

Accurately represent the test results under the new conditions when the ident module tegrated in the identified host equipment. By integration of the said radio module into the identified host equipment no changes were made to it or by external adaptation rcuitry that impacts the validity of the results of the original modules test reports; hence conducted signal measurements in the above listed reports also apply to Collins Aerospace & Setri 2AQWD-HMU200-3G DE CINTE 1107 FCCc, Issue Date: 09/22/2011 (Cellular) enn VW eFAST:

The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a convi in for possession or distribution of a |

controlled substance. See 47 CFR 1.2002(b) for the definition of a party for these purposes. |

Does the applicant or authorized agent so certify? Yes |

We autho!

CETECOM Inc., to act on our behalf on all matters concerning the above named equipment. We declare that CETECOM Inc. is allowed to forward all information related to the approval project to Aaa ee MOU Tere ee Re SEAN A CSSU CEM melee a -MaaCwe] eee Ley ye) fe LeLL eure ear ROR Ree lite Lee em Oi ett eur tO Ur ml Ce ieee Mee Late MCs am Re mem mcd tel: (ee ml lee a) Tee ee imma ear Ce ee eu chem Cy FT er ait CLF the applicant is responsible for (1) labeling the equipment with the exact FCC ID application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the ree me Brie ela M eee m lee moti mmm hme UM ly FCC's technical requirements. PU Cue OR RU er me uC We ee eae ter however, the applicant remains responsible for all statements in this application. If an agent has signed this application on behalf of the applicant, a written letter of authorizatio which includes information to enabie the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the Chime ment ma Ce yi Lime a La) SEC uC ce Ree By wOG Jd |

Ra CcUmol mW date a rel ieee lace wel om eer men eck leat ta) Ye oe e Cue Cee RAR h Address: 400 Main Street, East Hartford, CT Product Name: eFAST Di fore CTE rem Ler Ooa Fcc iD: 2AQWD-HMU200-3G

To Whom It May Concern:

In accordance with 0.457(d) and 0.459 of CFR 47, and KDB 726920, Pratt and ULL sg hereby requests permanent confidentiality for documents filed under the sol Melia dseteyl a ny elas 1) (ole ET ste-Lis) Brae emeTecti) leant Operational Description These items contain detailed system and equipment description and related information about the product which Pratt and Whitney considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this LS fe Bey from which future technological products will evolve, Pratt and Whitney also feels that this information would be of benefit to its competitors, and that the disclosure of the information in bea NCR meu Onc ECE Cann Rn ele Ca We are aware that exhibit types cover letters, attestations, label document, test reports, RF exposure information (SAR and MPE reports), cannot be requested to be classified confidential and are thus subject to publication, as will be documents of all other exhibits nace elm Ce have not requested a confidentiality classification. Best, len eae ED Ui ta ita Title: Associate Director, Software Engineering Company Name: Pratt & Whitney Addre 400M SER eC eed Ce]

SUT Ce Cee eC P ate) 7435 Oakland Mills Road OTE ma cs}

Date:

Request for Permanent Confidentiali FCC ID: ZAQWD-HMU200-3G ain Stree , East Hartford, CT 06118

Federal Communications Commissi Equipment Authorization Division 7435 Oakland Mills Road Tor my ea Ry bs}

Date:

Subject: Cache eect evi a FCC-ID: 2AQWD-HMU200-3G SOM em Casella sat In accordance with 0.457(d) and 0.459 of CFR 47, Pratt and Tam elem eT) short term confidentiality for documents filed under the so) -aodilinlmay ssc 1. External Photographs 2. Internal Photographs 3. User / Instruction Manual 4. Test Set-up Photographs until the product will be publicly announced. Slee emeniG Coc inges tk C Mme tteh These items contain detailed system and equipment description and related information about Beceem ee ear m LM OL ta awe esac sy) proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, Pratt and Whitney also feels that this eT em cele M RM Timm (eMue lira tic leme lt Reel marta lta alten Rats TilcolwerrlaCeyee ty ceo UH em OORT Mem r yerdl leet mince ts advantage in the market. We are informed and aware of our obligation that we have to inform the involved TCB in written CURVED A Bm CRICote MCT lem tt mslece od prior to the above specified confidentiality release date so that the short term cette Slarclamme kos titecleCel ever Ma cee stg (elam ce) product launch. We are aware that exhibit types cover letters, attestations, label document, test RE EAS RF exposure information (SAR and MPE reports), cannot be ete Rood Reeve RRsat eed and are thus subject to publication, as will be documents of all other exhibits types for which we have not requested a confidentiality classification. Name: Paul Scheid liue: Associate Director, Software Engineci ing CU SUVA EC elim mT Address: 400 Main Street, East Hartford, CT 06118