all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 3.01 MiB | December 10 2016 | |||
1 | Cover Letter(s) | December 10 2016 | ||||||
1 | Cover Letter(s) | December 10 2016 | ||||||
1 | External Photos | December 10 2016 | ||||||
1 | Internal Photos | December 10 2016 | ||||||
1 | ID Label/Location Info | December 10 2016 | ||||||
1 | Cover Letter(s) | December 10 2016 | ||||||
1 | Test Report | December 10 2016 | ||||||
1 | Test Setup Photos | December 10 2016 |
1 | User Manual | Users Manual | 3.01 MiB | December 10 2016 |
9/16 1 2016 Conserve este Manual del Propietario para referencia futura. Lea completamente estas instrucciones antes de usar este producto. M A e Informacin de Garanta Manual del Propietario No. de Modelo: PKC0BU7 Retroceso de 7,0 pul. Cmara Digital de 7.0-inch Digital Back-Up Camera Model No.: PKC0BU7 Owners Manual and Warranty Information A M Read these instructions completely before using this product. Retain this Owners Manual for future reference. 2016 1 9/16 CONTENTS SAFETY PRECAUTIONS ................................................................................................................2 Back-Up Camera Safety ..........................................................................................................2 INTRODUCTION .............................................................................................................................3 FEATURES ......................................................................................................................................3 INSTALLATION ................................................................................................................................4 OPERATION ....................................................................................................................................6 Testing the System ..................................................................................................................6 Monitor Controls ......................................................................................................................6 CARE AND MAINTENANCE ...........................................................................................................8 Storage ...................................................................................................................................8 Cleaning ..................................................................................................................................8 Fuse Replacement ..................................................................................................................8 Disposal ..................................................................................................................................8 SPECIFICATIONS ...........................................................................................................................8 FCC INFORMATION ........................................................................................................................8 Notice to Drivers in California and Minnesota: .........................................................................9 ICC INFORMATION .........................................................................................................................9 TROUBLESHOOTING .....................................................................................................................9 LIMITED WARRANTY ...................................................................................................................10 To Obtain Service ..................................................................................................................10 SAFETY PRECAUTIONS cause cancer or birth defects or other reproductive harm. This product contains a chemical known to the State of California to This safety alert symbol indicates that a potential personal injury hazard is present. The symbol is usually used with a signal word (e.g., WARNING) which designates the degree or level of hazard seriousness. The signal word WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. The signal word NOTICE indicates a situation which can cause damage to the product, other personal property and/or to the environment, or cause the product to operate improperly. The combination of the safety alert symbol and signal word is used in safety messages throughout this manual and on safety labels on this product. All safety messages that follow have WARNING level hazards. Failure to comply could result in death or serious injury. Back-Up Camera Safety Please check with your local and state authorities to confirm what is legal regarding the mounting of the Back-Up Camera to your vehicle. It is the responsibility of the vehicle owner to understand state and municipal regulations and ensure compliance. When installing the Back-Up Camera, the vehicle must be turned off with the vehicle in park and the park brake applied. Do not attempt to install the Back-Up Camera while the engine is operating. Do not modify the wiring in any way. Only install the Back-Up Camera to a 12-volt or 24-volt DC system. Connecting to anything other than a 12-volt or 24-volt DC system may damage the Back-up Camera components or the vehicle electrical system. If you are not confident working with 12-volt or 24-volt DC vehicle wiring, have the Back-Up Camera professionally installed. Keep all power cords and wires away from the vehicles mechanical controls. Do not mount the monitor where it will interfere with your view of the road or with any airbags. Do not adjust monitor settings while operating the vehicle. Do not use in a vehicle which has an alarm or horn when driving in reverse. Do not paint or spray the camera. See FCC information on page 8. 2 2 Vea la informacin de la FCC en la pgina 8. No pinte o atomice la cmara. No lo use en un vehculo que active una alarma o bocina al conducirlo en retroceso. No ajuste la configuracin del monitor mientras est operando el vehculo. No monte el monitor donde interfiera con la visin de la carretera o con cualquier airbag. Mantenga todos los cordones de energa y cables alejados de los controles mecnicos del vehculo. haga que un profesional le instale su Cmara de Retroceso. Si usted no se siente seguro al trabajar con el alambrado de un vehculo de 12 voltios o 24 voltios CC, la Cmara de Retroceso o el sistema elctrico del vehculo. cualquier cosa diferente a un sistema de 12 voltios o 24 voltios CC podr daar los componentes de Slo instale la Cmara de Retroceso en un sistema de 12 voltios o 24 voltios CC. El conectarla a No modifique el alambrado de ninguna manera. No intente instalar la Cmara de Retroceso mientras que el motor est funcionando. Cuando instale la Cmara de Retroceso, el vehculo tiene que estar apagado con la palanca de marchas en la posicin "park" y con el freno de mano aplicado. entender las regulaciones municipales y estatales y garantizar su cumplimiento. montaje de la Cmara de Retroceso en su vehculo. Es la responsabilidad del propietario del vehculo Por favor verifique con las autoridades locales y estatales para confirmar que es legal con respecto al Seguridad de la Cmara de Retroceso de ADVERTENCIA. El no cumplirlos puede resultar en la muerte o en lesiones graves. ADVERTENCIA Todos los mensajes de seguridad que siguen tiene niveles de seguridad de seguridad a lo largo de este manual y en etiquetas de seguridad en este producto. La combinacin del smbolo de alerta de seguridad y la palabra de sealamiento es usada en mensajes propiedad personal y/o al medio ambiente o causar que el producto funcione de manera incorrecta. La palabra de sealamiento AVISO indica una situacin que puede causarle dao al producto, otra resultar en la muerte o en lesiones graves. La palabra de sealamiento ADVERTENCIA indica una situacin peligrosa que, si no se evita, puede ADVERTENCIA) la cual designa el grado o nivel de seriedad del peligro. personal. Este smbolo es usualmente usado con una palabra de sealamiento (por ejemplo, Este smbolo de alerta de seguridad indica que est presente un peligro potencial de lesin como causante de cncer, defectos de nacimiento u otros daos al sistema reproductivo. ADVERTENCIA Este producto contiene un qumico conocido en el Estado de California PRECAUCIONES DE SEGURIDAD Para Obtener Servicio ...........................................................................................................10 GARANTA LIMITADA ...................................................................................................................10 RESOLUCIN DE PROBLEMAS ....................................................................................................9 INFORMACIN DE LA ICC .............................................................................................................9 Aviso a los Conductores en California y Minnesota: ................................................................9 INFORMACIN DE LA FCC ............................................................................................................8 ESPECIFICACIONES ......................................................................................................................8 Descarte .................................................................................................................................8 Reemplazo del Fusible ............................................................................................................8 Limpieza ..................................................................................................................................8 Almacenaje .............................................................................................................................8 CUIDADOS Y MANTENIMIENTO ....................................................................................................8 Controles del Monitor ..............................................................................................................6 Comprobacin del Sistema .....................................................................................................6 OPERACIN ...................................................................................................................................6 INSTALACIN .................................................................................................................................4 CARACTERSTICAS........................................................................................................................3 INTRODUCCIN .............................................................................................................................3 Seguridad de la Cmara de Retroceso ...................................................................................2 PRECAUCIONES DE SEGURIDAD .................................................................................................2 NDICE 5. Fusible de 1A voltios o 24 voltios energa del monitor de 12 3a) Almohadilla adhesiva 4. Cordn del enchufe de 3. Brazo del monitor 2. Monitor monitor 1. Puerto de energa del Leyenda 7 8 9 10 3 monitor 11. Correas de montaje del 10. LEDs infrarrojos 9. Sensor LED infrarrojo 8. Botn de aparear la cmara 7. Cmara 6f) Arandelas 6e) Tuercas de seguridad 6d) Tornillos 6c) Conectores de cables 6b) Anillo de plstico 6a) Cintas de amarre 6. Bolsa de herrajes 6 6f 6e 6d 6b 6c 5 4 M A 6a 3a 3 INTRODUCTION The Back-Up Camera displays images behind the vehicle, and is used when backing up a vehicle. When the vehicle is driven in reverse, the camera is activated, which sends a signal to the transmitter. The transmitter sends a video signal to the monitor, which then displays the view captured by the camera. FEATURES Color monitor displays view from the rear of the vehicle Wireless monitor can be mounted to a windshield or a dashboard with the supplied adhesive pad for Adjustable monitor mounting arm Adjustable vertical camera angle Infared LED lights for nighttime vision Ability to pair two different cameras for two different views Weatherproof camera with 110 viewing angle Reduces the danger of harm or damage due to unseen objects System activates automatically when car is shifted into reverse easy visibility 2 1 11 3 3a 6a A M 4 5 11 1 10 9 2 El sistema se activa automticamente cuando el carro es puesto en retroceso Reduce el peligro de lesiones o daos causados por objetos no vistos Cmara impermeable con ngulo de 110 Habilidad de aparear dos cmaras diferentes para obtener dos puntos de vista diferentes Luces LED infrarrojas para visin nocturna ngulo vertical de cmara ajustable Brazo de montaje ajustable del monitor Para mejor visibilidad el monitor inalmbrico puede ser montado en el parabrisas o en el tablero de El monitor presenta las vistas de la parte trasera del vehculo CARACTERSTICAS cmara. transmisor. El transmisor enva una seal de vdeo al monitor, el cual presenta la vista capturada por la Cuando el vehculo es conducido en retroceso, la cmara es activada, lo cual enva una seal al La Cmara de Retroceso presenta imgenes detrs del vehculo y se usa al retroceder el vehculo. INTRODUCCIN instrumentos usando la almohadilla adhesiva suministrada 6c 6b 8 7 6d 6e 6f Legend 1. Monitor Power Port 2. Monitor 3. Monitor Arm 4. Monitor 12-volt or 24-volt 5. 1A Fuse 3a) Adhesive Pad Power Socket Cord 6. Hardware Bag 6a) Ties 6b) Plastic Grommet 6c) Wire Connectors 6d) Screws 6e) Locknuts 6f) Washers 3 6 7. Camera 8. Camera Pairing Button 9. 10. Infrared LEDs 11. Monitor Mounting Straps Infrared LED Sensor Some states or local governments may have regulations or laws that restrict the INSTALLATION use of anything that might impair the clear view of a license plate. Check local laws for compliance. taillight harness. If you are not comfortable or knowledgeable with 12-volt or 24-volt DC wiring, have the system professionally installed. different makes and models of vehicles. For vehicle-specific questions, contact your vehicles manufacturer. For the Back-Up Camera to be properly installed, it must be wired into the vehicles These instructions are only meant as a general guide due to the number of 1. Remove the screws that hold the license plate to the vehicle. Position the camera mounting plate behind 2. the license plate. Insert the screws through the license plate, 3. the camera mounting plate and the washers. If your hardware is not the correct length, use the supplied hardware. 4 10. Una vez determinados los cables de las luces de reverso apropiados, los cables de la cmara 9. sobre las prcticas elctricas de 12 voltios o 24 voltios CC. usted desea alambrar la cmara usando un mtodo diferente, usted deber tener conocimientos deben ser empalmados con los del vehculo usando los conectores de alambre suministrados. Si Inserte el cable de la cmara por entre el anillo si es necesario. el cable de la cmara. ojal de plstico en el agujero. Usted tiene que usar el ojal para evitar que el borde del agujero dae 8. Si necesita perforar un agujero, use una broca de 1/2 pul. (13 mm) para perforar el agujero. Instale el usted tiene que tomar precauciones para no daarlos. elctricas o componentes del sistema de combustible, detrs de la ubicacin de perforacin, QUE HAY DETRS DE LA UBICACIN DE PERFORACIN. Si hay componentes, como piezas para encaminar los cables de la cmara. Antes de perforar un agujero, usted TIENE QUE MIRAR AVISO Dependiendo del tipo de su vehculo, pueda que sea necesario perforar un agujero 7. Remueva el cable de batera negativo () del vehculo. vehculo para obtener los diagramas de alambrado especficos del vehculo. localizar el circuito de luces de reverso del vehculo, pngase en contacto con el fabricante del Usted puede usar los cables de luces de reverso derechos o izquierdos. Para obtener ayuda en 6. Determine cuales son los cables positivo (+) y negativo (-) de las luces de reverso en el vehculo. 5. Instale los tornillos de la placa de matrcula para asegurar la cmara al vehculo. proporcione una vista ptima de los objetos que estn detrs del vehculo. La cmara deber ser ajustada a la posicin horizontal con relacin a la tierra de modo que Para ajustar el ngulo de la cmara, incline la cmara hacia una de las seis posiciones. 4. Ajuste la cmara como sea necesario:
tierra de modo que proporcione una visin ptima de los objetos que estn detrs del vehculo. AVISO El ngulo de la cmara deber ser ajustado a la posicin horizontal con relacin a la The camera angle should be adjusted to a horizontal position relative to the ground, so as to provide an optimal view of objects behind the vehicle. 4. Adjust the camera as required:
optimal view of objects behind the vehicle. To adjust the camera angle, tilt the camera to one of the six positions. The camera should be adjusted to a horizontal position relative to the ground, so as to provide Install the license plate screws to secure the camera to the vehicle. 5. 6. Determine which are the positive (+) and negative (-) wires for the reverse lights on the vehicle. You can use either the right- or left-side reverse light wires. For help locating the vehicles reverse light circuit, contact your vehicles manufacturer for vehicle-specific wiring diagrams. 7. Remove the vehicles negative (-) battery cable. Depending on your vehicle type, it may be necessary to drill a hole to route the camera wire. Before you drill a hole you MUST CHECK WHAT IS BEHIND THE DRILLING LOCATION. If there are any vehicle components, like electrical parts or fuel system components, behind the drilling location, you must take precaution not to damage them. 8. If you need to drill a hole, use a 1/2 in. (13 mm) drill to drill the hole. Install the plastic grommet in the hole. You must use the grommet to prevent the edge of the hole from damaging the camera wire. Insert the camera wire through the grommet if required. spliced into the vehicle wires using the supplied wire connectors. If you choose to wire the camera using a different method, you must be knowledgeable in 12-volt or 24-volt DC electrical practices. 9. 10. Once the proper wires for the reverse lights have been determined, the camera wires must be 4 suministrados. de la longitud apropiada, use los herrajes y las arandelas. Si sus herrajes no son matrcula, la placa de montaje de la cmara Inserte los tornillos por entre la placa de detrs de la placa de matrcula. Coloque la placa de montaje de la cmara placa de matrcula en el vehculo. Remueva los tornillos que sostienen la 3. 2. 1. consulte al fabricante de su vehculo. de diferentes marcas y modelos de vehculos. Para preguntas especficas de su vehculo, AVISO Estas instrucciones fueron intentadas como una gua general por causa del nmero profesionalmente. conocimiento del alambrado de 12 voltios o 24 voltios CC, haga que le instalen el sistema alambrada en el arns de cables de la luces traseras. Si usted no se siente confortable o tiene AVISO Para que la Cmara de Retroceso quede instalada apropiadamente, ella deber ser la conformidad de las leyes locales. restringen el uso de cualquier cosa que impida la vista clara de la placa de matrcula. Verifique AVISO Algunos estados o gobiernos locales podrn tener regulaciones o leyes que INSTALACIN 5 17. Limpie y seque la superficie de montaje. mientras conduce. visto, pero no quede cerca del espejo retrovisor o en otra posicin donde pueda obstruir su visin 16. Busque una superficie de montaje dentro del vehculo para el monitor donde pueda ser fcilmente 15. Reconecte el cable de batera negativo () del vehculo. luces de reverso. cierre la traba del conector de alambres. Haga esto en los cables positivo (+) y negativo () de las 14. Engarce la abrazadera metlica usando unos alicates para garantizar una buena conexin y luego 2. Cable de la cmara 1. Cable del vehculo Leyenda 2 1
+
2 3 1 6 5 2 4 7 13. Deslice el cable apropiado de la cmara en el conector. 12. Coloque el conector alrededor del cable del vehculo que est empalmando. reverso. y el cable negro negativo () de la cmara se empalma con el cable negativo () de las luces de 11. El cable rojo positivo (+) de la cmara se empalma con el cable positivo (+) de las luces de reverso 7. Cmara 6. Cable de energa positivo (+) (rojo) de la cmara 5. Cable de energa negativo () (negro) de la cmara 4. Cable negativo () de la luz de reverso 3. Luz de reverso 2. Conector de cables 1. Cable positivo (+) de la luz de reverso Leyenda 7 4 2 5 6 1 3 2
+
Legend 1. Positive (+) Wire from Reverse Light 2. Wire Connector 3. Reverse Light 4. Negative (-) Wire from Reverse Light 5. Negative (-) Camera Power Wire (Black) 6. Positive (+) Camera Power Wire (Red) 7. Camera the black negative (-) wire from the camera splices into the negative (-) wire from the reverse lights. 11. The red positive (+) wire from the camera splices into the positive (+) wire from the reverse lights and 12. Position the connector around the vehicle wire you are splicing into. 13. Slide the appropriate wire from the camera into the connector. 1 2 Legend 1. Wire from Vehicle 2. Wire from Camera wire connector. Do this for both the positive (+) and negative (-) wires from the reverse light. 14. Crimp the metal clamp using a pliers to ensure a good connection and then close the lock of the 15. Reconnect the vehicles negative (-) battery cable. 16. Find a mounting surface inside the vehicle for the monitor where it can be easily seen, but is not near the rearview mirror assembly or in any other position where it can obstruct your vision when driving. 17. Clean and dry the mounting surface. 5 18. Remove the film from the foam adhesive pad and press stand firmly onto mounting surface. NOTE: After mounting, protect the mounting surface from direct sunlight for 24 hours. 19. Slide the monitor onto the monitor arm. The monitor angle can be adjusted by loosening the monitor angle adjustment knobs, tilting the monitor, then tightening the knobs. 20. Plug the monitor cigarette lighter/accessory socket power cord into the monitor power port. 21. Plug the monitor cigarette lighter/accessory socket power cord into a 12-volt DC power port. The screen will flash, then turn off, and the monitors blue power LED will blink, indicating the monitor is in standby mode (monitor has power and is turned on, but the vehicle is not in reverse). 22. Route and secure all wires as needed. OPERATION Testing the System Push the ON/OFF button. The blue LED will light. 1. With the park brake applied, turn the vehicle ignition switch to the ON position. Do not start the 2. vehicle. 3. Shift the vehicle to reverse to power the transmitter. The blue power LED will light continuously until it picks up a signal. Then the monitor will display the image from the camera. 4. If the image does not display, check your connections and make sure the camera view is not obstructed. 5. If the image still does not display, the unit may need to be paired. See Adjusting Monitor Settings section. Also see Troubleshooting section. Monitor Controls 7 A M 1 2 3 4 5 6 Legend 1. Menu Button UP Button 2. 3. DOWN Button 4. Select Button 5. Guidelines Button (turns guidelines on and off) 6. ON/OFF Button 7. Blue Power LED ON/OFF Button Press to turn the display on. Press it again to turn the display off. NOTE: In menu mode, the menu button also serves as a back button to navigate menu levels. Blue Power LED When the vehicle is in reverse or not in reverse (standby mode), and the monitor has power and is turned on, the LED will light continuously. 6 6 puesto, gire el interruptor de ignicin a la posicin ON y ponga el vehculo en reverso. Para ajustar los siguientes parmetros del monitor, asegrese de que el freno de emergencia est Ajuste de los Parmetros del Monitor est encendido, la luz LED se prender continuamente. Cuando el vehculo esta en reverso o no en reverso (modalidad de espera) y el monitor tiene energa y LED azul de energa los niveles del men. NOTA: En la modalidad de men, el botn de men tambin sirve como botn de retroceso para navegar Oprima para encender el monitor. Oprima de nuevo para apagar el monitor. Botn de ON/OFF 7. LED azul de energa 6. Botn de ON/OFF 5. Botn de directrices (enciende y apaga las directrices) 4. Botn de Seleccin 3. Botn hacia ABAJO Botn hacia ARRIBA 2. 1. Botn de men Leyenda 6 5 4 3 2 1 M A 7 Controles del Monitor Ajuste de la configuracin del monitor. Vea tambin la seccin de Resolucin de Problemas. 5. Si la imagen todava no aparece, pueda que la unidad necesite ser apareada. Vea la seccin est obstruida. 4. Si la imagen no aparece, verifique sus conexiones y asegrese de que la visin de la cmara no imagen de la cmara. encendida de forma continua hasta que reciba una seal. A continuacin, el monitor mostrar la Cambie el vehculo a reverso para energizar el transmisor. La luz LED azul de energa estar 3.
(ENCENDIDO). No encienda el vehculo. Con el freno de mano puesto, gire el interruptor de ignicin del vehculo slo a la posicin ON 2. Oprima el botn ON/OFF. La luz LED azul se encender. 1. Comprobacin del Sistema OPERACIN 22. Encamine y asegure todos los cables como sea necesario. energa y est encendido, pero el vehculo no est en reverso). monitor parpadear, indicando que el monitor est en la modalidad de espera (el monitor tiene puerto de energa de 12 voltios CC. La pantalla destellar, luego se apagar y el LED azul del 21. Enchufe el cordn de energa del tomacorriente del encendedor de cigarrillos/accesorios en el puerto de energa del monitor. 20. Enchufe el cordn de energa del tomacorriente del encendedor de cigarrillos/accesorios en el botones de ajuste de ngulo del monitor, inclinando el monitor y luego apretando los botones. 19. Deslice el monitor en el brazo del monitor. El ngulo del monitor puede ser ajustado aflojando los NOTA: Despus del montaje, proteja la superficie de montaje de la luz solar durante 24 horas. de montaje. 18. Remueva la pelcula de la almohadilla adhesiva y oprima firmemente el soporte sobre la superficie 7
. como la cmara predeterminada. indica que la seal es demasiado dbil o que la seal est desconectada. NOTA: Este smbolo 3. Sostenga el botn de la flecha arriba durante 5 segundos. 2. Seleccione la versin 1. Seleccione configuracin
. Para desparear todas las cmaras:
3. Seleccione la cmara 1
, cmara 2 2. Seleccione pantalla automtica AUTO. 1. Seleccione configuracin Para configurar la cmara predeterminada (cmara principal):
cmara predeterminada. NOTA: Cuando dos cmaras son usadas, una cmara puede ser configurada como la 2. Dentro de estos 20 segundos, mantenga oprimido el botn de apareamiento de la 1. Seleccione la cmara 2 Para adicionar una segunda cmara (no est an disponible):
cmara ubicado en la parte inferior de la cmara. La cmara y el monitor se aparearn. durante 20 segundos. El logotipo de reloj de arena de apareamiento aparecer o dividida
. El logotipo de reloj de arena de apareamiento aparecer en que el sistema es encendido. Una vez apareados, la cmara y el monitor se sincronizarn automticamente cada vez cmara ubicado en la parte inferior de la cmara. La cmara y el monitor se aparearn. 2. Dentro de estos 20 segundos, mantenga oprimido el botn de apareamiento de la la pantalla durante 20 segundos. 1. Seleccione la cmara 1 Para aparear la cmara con el monitor:
est disponible). La cmara y el monitor vienen de fabrica apareados. entre la cmara y el monitor o cuando se adiciona una segunda cmara (todava no NOTA: Esta funcin SLO debe ser usada en casos donde no hay comunicacin comunicacin). Seleccione este icono para aparear la cmara con el monitor (establece/restablece la del men, oprima nuevamente el botn del men). 3. Para seleccionar un icono del men, oprima y suelte el botn de seleccin. (Para salir de la pantalla 2. Use las flechas de arriba y abajo para desplazarse a travs de los conos del men. 1. Oprima el botn del men para traer la pantalla de men. marcha atrs. unos segundos en estabilizarse. Espere hasta que la imagen se haya estabilizado entes de dar AVISO En condiciones extremamente brillantes, la imagen de la pantalla se podr tomar ponga el vehculo en reverso. Asegrese de que el freno de emergencia est puesto, gire el interruptor de ignicin a la posicin ON y Restablecimiento de la comunicacin entre la cmara y el monitor
, voltear el sistema saldr automticamente despus de 10 segundos. arriba y voltear 4. Oprima el botn del men principal para retroceder (repetidamente para salir). Note que y 3. Use las flechas de arriba/abajo para cambiar entre normal 2. Seleccione la cmara 1 1. Seleccione espejo. orientaciones de montaje de la cmara. Seleccione este icono para ajustar la orientacin de imagen para adaptarse a diferentes
, arriba
. el sistema saldr automticamente despus de 10 segundos. 4. Oprima el botn del men principal para retroceder (repetidamente para salir). Note que 3. Use las flechas de arriba/abajo para aumentar o disminuir el ajuste. 2. Seleccione brillo 1. Seleccione la cmara 1 Seleccione el icono para ajustar color/contraste/brillo.
, contraste
, o color
. del men, oprima nuevamente el botn del men). 3. Para seleccionar un icono del men, oprima y suelte el botn de seleccin. (Para salir de la pantalla 2. Use las flechas de arriba y abajo para desplazarse a travs de los conos del men. 1. Oprima el botn del men para traer la pantalla de men. marcha atrs. unos segundos en estabilizarse. Espere hasta que la imagen se haya estabilizado entes de dar AVISO En condiciones extremamente brillantes, la imagen de la pantalla se podr tomar Adjusting Monitor Settings To adjust the following monitor settings, make sure the park brake is applied, turn the ignition switch to the ON position and shift the vehicle to reverse. In extremely bright conditions, the screen image may take a few seconds to stabilize. Wait until the image has stabilized before backing up. 1. Press the menu button to bring up the menu screen. 2. Use the up and down arrows to scroll through the menu icons. 3. To select a menu icon press and release the select button. (To exit the menu screen press the menu button again.) Select this icon to adjust Brightness/Contrast/Color. 1. Select camera 1 2. Select Brightness
, or Color 3. Use the up/down arrows to increase or decrease the setting. 4. Press the main menu button to go back (repeatedly to exit). Note system will exit
, Contrast
. automatically after 10 seconds. Select this icon to adjust picture orientation to accommodate various camera mounting orientations. 1. Select mirror. 2. Select camera 1 3. Use the up/down arrows to toggle between normal 4. Press the main menu button to go back (repeatedly to exit). Note system will exit flip automatically after 10 seconds.
, and up and
, flip
, up
. Reestablishing Communication Between Camera and Monitor Make sure the park brake is applied, turn the ignition switch to the ON position and shift the vehicle to reverse. In extremely bright conditions, the screen image may take a few seconds to stabilize. Wait until the image has stabilized before backing up. 1. Press the menu button to bring up the menu screen. 2. Use the up and down arrows to scroll through the menu icons. 3. To select a menu icon press and release the select button. (To exit the menu screen press the menu button again.) Select this icon to pair camera with monitor (establishes/restores communication). NOTE: This feature should ONLY be used in cases when there is no communication between the camera and monitor or when adding a second camera (not yet available). Camera and monitor come from the factory already paired. To pair camera with monitor:
1. Select camera 1 2. Within this 20 seconds of time, press and hold camera pairing button on underside of camera. Camera and monitor will be paired. Once paired, camera and monitor will pair automatically each time the system is turned on. Pairing hourglass logo will show in monitor for 20 seconds. camera. Camera and monitor will be paired. Pairing hourglass logo will show for 20 seconds. To add second camera (not yet available):
1. Select camera 2 2. Within this 20 seconds of time, press and hold camera pairing button on underside of NOTE: When two cameras are used, one camera can be set as the default camera. To set default camera (master camera):
1. Select set up 2. Select auto display. AUTO . 3. Select camera 1 To unpair all cameras:
1. Select setup
. 2. Select version 3. Hold the up arrow button for 5 seconds NOTE: This symbol indicates the signal is too weak or signal is disconnected. as default camera
, camera 2
, or split
. 7 To view firmware:
1. Select set up 2. Select version
. CARE AND MAINTENANCE Storage Store this Back-Up Camera in a cool, dry area and keep it away from direct sunlight, heat, excessive humidity and dampness. Cleaning Do not clean or wipe the Back-Up Camera with solvents or chemical materials. If necessary, remove dirt or stains using a soft cloth dampened with a mild detergent solution. Fuse Replacement 1. Turn the cap on the tip of the power plug counterclockwise (no tools needed). 2. Remove the cap, center pin and fuse. 3. Replace the fuse with a new 1-amp fuse. 4. Replace the center pin and cap. Turn the cap clockwise. Disposal The Back-Up Camera is designed to provide years of service. The Back-Up Camera should be recycled or safely disposed of at a local electronics recycler. Examples of places that will accept items like this are: county or municipal recycling drop-off centers or scrap metal dealers. SPECIFICATIONS Camera Current consumption (with transmitter) Pixels View angle (measured 9.8 ft [3 m] from camera) Frequency RF transmission distance Operation/storage temperature Monitor LCD display screen size Power cord fuse FCC INFORMATION
<250 mA 640 x 480 110 2400-2483.5 0.3 MHz no interference: 492 ft (150 m) 14 to 140F (-10 to 60C) 7.0 in. (178 mm) 1A Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the transmitter. Increase the separation between the equipment and monitor. Connect the equipment into an outlet on a circuit different from that to which the monitor is Consult the dealer or an experienced radio/TV technician for help. needed. 8 8 monitor. Consulte al agente o a un tcnico de radio/TV para obtener ayuda. Conecte el equipo en una toma de corriente de un circuito diferente a donde se necesita el Aumente la separacin entre el equipo y el monitor. Reoriente o reubique el transmisor. corregir la interferencia por medio de una o ms de las siguientes medidas:
ser determinado apagando y encendiendo el equipo, alentamos al usuario para que trate de Si este equipo causa interferencia daina a la recepcin de radio o televisin, lo cual puede una instalacin en particular. comunicaciones radiales. Sin embargo, no hay garanta de que dicha interferencia no ocurra en instala y se usa de acuerdo con las instrucciones, podr causar interferencia daina para las una instalacin residencial. Este equipo puede emitir frecuencia radial y energa y, si no se fueron diseados para suministrar proteccin razonable contra interferencias dainas en dispositivo digital Clase B, conforme a la Parte 15 de las Reglas de la FCC. Estos lmites AVISO Este equipo ha sido probado y se encontr que cumple con los lmites de un parte responsable de cumplimiento podr anular la autoridad del usuario para operar el equipo. ADVERTENCIACambios o modificaciones a este equipo no aprobadas expresamente por la INFORMACIN DE LA FCC Fusible del cable de energa Tamao de la pantalla LCD Monitor Temperatura de almacenaje/operacin Distancia de transmisin RF Frecuencia cmara) ngulo de visualizacin (medido 9.8 pies [3 m]) desde la Pixeles Consumo de corriente (con transmisor) Cmara ESPECIFICACIONES 14 a 140 F (-10 a 60 C) sin interferencias: 492 pies (150 m) 2400-2483,5 0,3 MHz. 110 640 x 480
<250 mA 1A 7,0 pul. (178 mm) distribuidores de chatarra. centros de entrega de artculos para reciclado municipales o del condado como tambin reciclaje de electrnicos. Ejemplos de lugares que aceptan artculos como este son:
de Retroceso debe ser reciclada o desechada de forma segura en una empresa local de La Cmara de Retroceso fue diseada para proporcionarle aos de servicio. La Cmara Descarte 4. Reinstale el pasador central y la tapa. Gire la tapa en el sentido horario. 3. Reemplace el fusible por uno de 1 amperios. 2. Remueva la tapa, el pasador central y el fusible. 1. Gire la tapa de la punta del enchufe de energa en el sentido contra horario (no se necesitan Reemplazo del Fusible solucin de detergente suave. Retroceso. Si es necesario, remueva la mugre o las manchas con un trapo suave humedecido en una No limpie o le pase un trapo impregnado con disolventes o materiales qumicos a la Cmara de Limpieza humedad excesiva. Almacene esta Cmara de Retroceso en una rea fra y seca, alejada de la luz solar directa, el calor y la Almacenaje CUIDADOS Y MANTENIMIENTO herramientas). 2. Seleccione la versin 1. Seleccione configuracin Para ver el firmware:
9
(apareamiento) necesita ser restablecido. el apareamiento. La comunicacin El monitor y la cmara han perdido El monitor est en un ngulo incorrecto Ajustes de pantalla incorrectos La cmara tiene un ngulo incorrecto El botn de energa del monitor est apagado La cmara o el monitor no reciben energa aparear. Siga las instrucciones para el monitor en la pgina 7. comunicacin entre la cmara y Vea Restablecimiento de la botones de ajuste de ngulo. Ajuste el monitor usando los botones del monitor. Ajuste la pantalla usando los Ajuste el ngulo de la cmara. monitor. Prenda el botn de energa del bien conectados. de alambres y empalmes estn Revise que todas las conexiones de reverso del vehculo. cmara y en el circuito de luces correctamente al monitor, a la cables estn conectados Asegrese de que todos los aline como sea necesario. alineacin de la cmara. Re Revise la ubicacin y la Accin Limpie el lente. ha movido La cmara fue montada incorrectamente o se barro, hielo, etc. El lente de la cmara est cubierto con nieve, est clara muestra nada o no La pantalla no Problema Situacin RESOLUCIN DE PROBLEMAS una distancia mnima de 20 cm entre el radiador y su cuerpo. cumplimiento con las normas de exposicin a RF de la FCC, este equipo debe ser instalado y operado a El dispositivo ha sido evaluado para cumplir el requisito general de la exposicin a RF. Para mantener el 2. Este dispositivo debe aceptar cualquier interferencia, incluidas las interferencias que puedan 1. Este dispositivo no puede causar interferencias; y est sujeta a las dos condiciones siguientes:
Este dispositivo cumple con RSSs exentos de licencia del Ministerio de Industria de Canad. La operacin provocar un funcionamiento no deseado del dispositivo. INFORMACIN DE LA ICC Vehculos de California Seccin 26708(a); Estatutos de Minnesota 2005, Seccin 169.71.) o daos que se puedan incurrir como resultado de hacerle caso omiso a este aviso. (Vea el cdigo de en el tablero de instrumentos. La compaa PEAK no se hace responsable por multas, penalidades parabrisas mientras operan el vehculo motorizado. Se deber usar otra opcin de montaje a friccin o La ley estatal le prohbe a los conductores de California y Minnesota usar copas de succin en los Aviso a los Conductores en California y Minnesota:
una distancia mnima de 20 cm entre el radiador y su cuerpo. cumplimiento con las normas de exposicin a RF de la FCC, este equipo debe ser instalado y operado a El dispositivo ha sido evaluado para cumplir el requisito general de la exposicin a RF. Para mantener el autoridad del usuario para operar este equipo. o TV causada por modificaciones no autorizadas en este equipo. Tales modificaciones pueden anular la operacin indeseada del dispositivo. El fabricante no es responsable por ninguna interferencia de radio dispositivo deber aceptar cualquier interferencia recibida, incluyendo interferencia que pueda causar la siguientes dos condiciones: (1) este dispositivo no deber causar interferencia daina, y (2) este Este dispositivo cumple con la Parte 15 de las Reglas de la FCC. La operacin est sujeta a las This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of device.The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate this equipment. The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCCs RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Notice to Drivers in California and Minnesota:
State law prohibits drivers in California and Minnesota from using suction mounts on their windshields while operating motor vehicles. Other dashboard or friction mounting options should be used. Peak does not take any responsibility for any fines, penalties, or damages that may be incurred as a result of disregarding this notice. (See California Vehicle Code Section 26708(a); Minnesota Statutes 2005, Section 169.71.) ICC INFORMATION This device complies with Industry Canadas license-exempt RSSs. Operation is subject to the following two conditions:
1. This device may not cause interference; and 2. This device must accept any interference, including interference that may cause undesired operation of the device. The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCCs RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. TROUBLESHOOTING Problem Monitor display is blank or unclear Situation The camera lens is covered with snow, mud, ice, etc. The camera is mounted incorrectly or has moved No power to the monitor or camera Monitor power button is off Camera is angled incorrectly Screen settings are incorrect Monitor is angled incorrectly Monitor and camera have become unpaired. The communication (pairing) needs to be reestablished. 9 Action Clean lens. Check camera location and alignment. Realign as necessary. Ensure all wires are correctly connected to the monitor, camera and into the vehicle reverse light circuit. Check all wire connections and splices for proper connection. Turn monitor power button on. Adjust camera angle. Adjust screen using monitor buttons. Adjust monitor angle using adjustment knobs. See Reestablishing Communication Between Camera and Monitor on page 7. Follow instructions to pair. LIMITED WARRANTY Manufacturer warrants to the original consumer, or purchaser, that the PEAK PKC0BU7 7.0-inch Digital Back-Up Camera will be free from defects in material and workmanship for 1 year from the date of sale to the original purchaser. Manufacturer hereby excludes and disclaims any and all other warranties, expressed or implied, beyond those warranties specified above. Manufacturer excludes any implied warranty of merchantability or fitness for a particular purpose. IF YOUR PEAK DIGITAL BACK-UP CAMERA MALFUNCTIONS DUE TO A DEFECT IN MATERIALS AND WORKMANSHIP WITHIN THE 1-YEAR WARRANTY PERIOD, MANUFACTURER WILL, AT ITS ELECTION REPAIR OR REPLACE IT. MANUFACTURER SHALL NOT, HOWEVER, BE RESPONSIBLE FOR ANY DAMAGE TO YOUR PRODUCT DUE TO ANY CAUSE OTHER THAN DEFECTS IN MATERIAL OR WORKMANSHIP, INCLUDING WITHOUT LIMITATION: FAILURE TO FOLLOW INSTRUCTIONS FOR USE; MISUSE; REPAIRS BY AN UNAUTHORIZED PERSON;
MISHANDLING; MODIFICATIONS; NORMAL WEAR AND TEAR; ACCIDENT OR OVERLOAD. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. MANUFACTURER SHALL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES FOR BREACH OF ANY EXPRESSED OR IMPLIED WARRANTY ON THIS PRODUCT OR BASED ON ANY OTHER CAUSE OR CLAIM. To Obtain Service:
1. Before returning this product for any reason, please call toll free (800) 477-5847. 2. Do not return your PEAK product to the place of purchase for service. Send your unit, postage prepaid and insured, along with a copy of the original sales receipt and a phone number to the address below. Pack your unit properly, as we are not responsible for any damage caused during shipping. Old World Industries, LLC c/o Technical Services 4065 Commercial Avenue Northbrook, IL 60062 manufacturers date will be used as the date of purchase. 3. A copy of the original receipt is required for warranty service. If no receipt is provided, the unit 10 www.peakauto.com FABRICADO EN CHINA Todos los derechos reservados Old World Industries, LLC, Northbrook, IL 60062 PEAK y la Grfica de la Montaa PEAK son marcas registradas de PEAK and the PEAK Mountain Graphic are trademarks of Old World Industries, LLC, Northbrook, IL 60062 All Rights Reserved MADE IN CHINA www.peakauto.com 10 3. Se requiere una copia del recibo original para servicio de garanta. Si no presenta un recibo, la fecha de fabricacin ser usada como la fecha de compra. Northbrook, IL 60062 4065 Commercial Avenue c/o Technical Services Old World Industries, LLC responsables por ningn dao causado durante el envo. a la direccin mostrada a continuacin. Empaque la unidad apropiadamente, ya que no somos pre pagado y asegurado, junto con una copia del recibo de venta original y un nmero telefnico 2. No retorne para servicio su producto PEAK al lugar de compra. Enve la unidad, con franqueo
(800) 477-5847. 1. Antes de retornar este producto por cualquier razn, por favor llame gratis al telfono Para Obtener Servicio:
PRODUCTO O BASADO EN CUALQUIERA OTRA CAUSA O RECLAMO. O PUNITIVO POR QUEBRANTO DE CUALQUIER GARANTA EXPRESA O IMPLCITA DE ESTE FABRICANTE NO SER RESPONSABLE POR NINGN DAO INCIDENTAL, CONSECUENTE O REEMPLAZO SEGN ESTA GARANTA ES EL REMEDIO EXCLUSIVO DEL CLIENTE. EL MODIFICACIONES, DESGASTE NORMAL, ACCIDENTES O SOBRECARGA. LA REPARACIN REPARACIONES EFECTUADAS POR PERSONAS NO AUTORIZADAS, MAL MANEJO, INCLUYENDO SIN LIMITACIONES: NO SEGUIR LAS INSTRUCCIONES DE USO, MAL USO, A CUALQUIER CAUSA QUE NO SE DEBA A DEFECTOS EN MATERIAL O MANO DE OBRA, SIN EMBARGO, NO SER RESPONSABLE POR NINGN DAO A SU PRODUCTO DEBIDO DE 1 AO, EL FABRICANTE A SU ELECCIN LA REPARAR O CAMBIAR. EL FABRICANTE, A UN DEFECTO EN MATERIAL O MANO DE OBRA DENTRO DEL PERODO DE GARANTA SI SU DIGITAL CMARA DE RETROCESO PEAK TIENE UN MAL FUNCIONAMIENTO DEBIDO un propsito en particular. anteriormente. El fabricante excluye cualquier garanta implcita de comerciabilidad o de aptitud para renuncia a cualquier otra garanta, expresa o implcita, ms all de aquellas garantas especificadas un 1 ao a partir de la fecha de venta al comprador original. El fabricante por la presente excluye y de 7,0 pul. PEAK modelo PKC0BU7 estar libre de defectos en material y mano de obra durante El fabricante le garantiza al consumidor original, o comprador, que la Cmara Digital de Retroceso GARANTA LIMITADA FCC and IC Note:
This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-10-12 | 2406 ~ 2472.5 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2016-10-12
|
||||
1 | Applicant's complete, legal business name |
Precision Enterprise Ltd
|
||||
1 | FCC Registration Number (FRN) |
0011720422
|
||||
1 | Physical Address |
Unit J 33/F., COS Centre
|
||||
1 |
Kwun Tong, Kowloon, N/A
|
|||||
1 |
Hong Kong
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@timcoengr.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
NDZ
|
||||
1 | Equipment Product Code |
ACN300
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
P**** P****
|
||||
1 | Title |
Project Manager
|
||||
1 | Telephone Number |
(852)******** Extension:
|
||||
1 | Fax Number |
(852)********
|
||||
1 |
p******@precisionhk.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless Rear View Backup System | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | Yes | ||||
1 | Grant Comments | Power listed is conducted. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Waltek Services(Shenzhen) Co., Ltd.
|
||||
1 | Name |
p****** z******
|
||||
1 | Telephone Number |
86755********
|
||||
1 | Fax Number |
86755********
|
||||
1 |
p******@waltek.com.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2406.00000000 | 2472.50000000 | 0.0770000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC