Yumi Kim Wireless Charging Pad User Manual Charging Instructions:
Specification:
IC statement:
1) Connect one end of the Micro USB cable into a computer or power adapter
(not included) and the other end into the charging pad. Input: DC5V, 2.0A DC9V, 1.67A Output: 10W Max Frequency: 110-205KHz Charging distance: < 4mm Dimensions: 90x90x11.8mm NW: Approx. 128.4g Transmission power: 29.67 dBuA/m at 3m distance This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment. Micro USB Cable Micro USB Port 2) 3) The standby indicator light will turn green when it is ready to charge your device. Place a Qi-enabled device face up in the center of the charging pad. The indicator light will turn blue when properly placed on the charging pad and will begin charging your device. Note: A green or flashing blue light indicates your device is not charging. Make sure your device is positioned correctly on your charging pad and that there are no other objects on the charging pad. You may need to remove your devices case as it may be blocking the wireless signal. 4) The charging pad will return to standby mode when the device is removed from the charger. Note:
This product works with a Micro USB charging cable. Only QC 2.0 standard power adapter supports this products quick charge function. FCC compliance statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Important: Changes or modifications not expressly approved by the part responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. FCC Statement:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Safety Instructions:
Read this manual carefully before using the Yumi Kim Wireless Charging Pad and keep this manual for future reference. Keep the charging pad away from heat, direct flame, direct sunlight, and sharp edges. To avoid risk of short circuit:
Do not insert any unintended metal object into the charger. Do not disassemble. Do not use in severely hot, humid or corrosive environments. Keep away from water and liquids. Do not place too close to a magnetic strip or chip card (ID card, bank card, etc.) to avoid magnetic failure. Keep the charging pad at least 20cm away from implanted medical devices
(pacemakers, cochlear implants, etc.) to avoid potential interference with the medical device. Not a toy. Keep out of childrens reach. The symbol above means that according to European Union (EU) laws and regulations this electrical/electronic equipment shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collection and recycling of this product at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation. 2020 YUMI KIM. All rights reserved. Made in China Tapis de recharge sans l Yumi Kim Guide de lutilisateur Directives de chargement :
Spcifications :
1) Connecter une extrmit du cble micro-USB dans un ordinateur ou un adaptateur dalimentation (non inclus) et lautre extrmit dans le tapis de recharge sans fil. Cble micro-USB Port micro-USB 2) 3) Le voyant lumineux de veille tournera au vert afin de vous indiquer de charger votre appareil. Dposer lappareil de technologie Qi, face vers le haut, au centre du tapis de chargement. Le voyant lumineux tournera au bleu lorsque lappareil est bien plac sur le tapis de chargement et le chargement de lappareil commencera. Remarque : Un voyant lumineux bleu ou vert clignotant indique que lappareil ne se charge pas. Assurez-vous de placer lappareil adquatement sur le tapis de recharge et quaucun objet ne se trouve sur le tapis de recharge. Vous devrez possiblement devoir retirer le tlphone de son tui, car ce dernier peut bloquer le signal sans fil. Courant dentre : DC5V, 2.0A DC9V, 1.67A Courant de sortie : 10W Max Frquence : 110-205KHz Distance de chargement : < 4mm Dimensions : 90x90x11.8mm Poids net : Environ 128.4g Puissance dmission : 29.67 dBuA/m 3m de distance nonc CI :
Cet appareil est conforme aux normes canadiennes sur les exemptions de licence CNR. Le fonctionnement est assujetti aux deux conditions suivantes : (1) cet appareil ne peut causer dinterfrence, et (2) cet appareil doit accepter toute interfrence, y compris celles qui pourraient provoquer un fonctionnement non souhaitable de lappareil. Cet appareil est conforme aux limites dexposition la radiation dIndustrie Canada tablies pour un environnement non contrl. Le symbole qui figure ci-dessus signifie que cet appareil lectrique/lectronique doit tre jet sparment des dchets mnagers, conformment aux lois et rglements de lUnion europenne (UE). Lorsque cet appareil aura atteint sa fin de vie, apportez-le dans un centre de collecte de dchets dsign par les autorits locales. La collecte et le recyclage slectifs propres cet appareil au moment de le jeter permettront de conserver les ressources naturelles et dassurer quil soit recycl de manire protger la sant humaine et lenvironnement. Des pnalits peuvent tre imposes dans le cadre de la mise au rebut de cet appareil, conformment aux lois nationales. 4) Le tapis de recharge sans fil retourne en mode veille lorsque le tlphone est retir du chargeur. Remarque :
Ce chargeur fonctionne avec un cble de chargement micro-USB. Seul un adaptateur dalimentation QC 2.0 peut tre utilis pour accder la fonction de chargement rapide. 2020 YUMI KIM. Tous droits rservs. Fabriqu en Chine Consignes de scurit :
Veuillez lire ce guide attentivement avant dutiliser le tapis de recharge sans fil Yumi Kim et conservez-le titre de rfrence ultrieure. Garder le tapis de recharge sans fil lcart de la chaleur, des flammes directes, de la lumire solaire directe et des bords tranchants. Afin dviter les risques dun court-circuit :
Ne pas insrer dobjets en mtal indsirables dans le chargeur. Ne pas dsassembler le chargeur. Ne pas lutiliser dans des environnements extrmement chauds, humides ou corrosifs. Le conserver labri de leau et dautres liquides. Ne pas le placer trop prs dune bande magntique ou dune carte puce
(carte didentit, carte bancaire, etc.) afin dviter une dfaillance magntique. Conserver le tapis de recharge sans fil une distance dau moins 20 cm dun dispositif mdical implant (notamment un stimulateur cardiaque, un implant cochlaire, etc.) afin dviter toute interfrence avec lappareil mdical. Nest pas un jouet. Tenir hors de porte des enfants.