FCC ID: 2AY4Z-SR-WC3N1 3 in 1 Wireless Charging Frame

3 in 1 Wireless Charging Frame 3 in 1 Wireless Charging Frame Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC RF exposure statement:

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body.

C5266091_X24_Ed.2 Attestation Statements TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules for covered telecommunications equipment and video surveillance equipment produced by entities identified on the Commissions Covered List1, which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) that prohibit equipment authorization Applicant Company name: Prime Brands Group, Inc. Grantee code: 2AY4Z FCC ID:

Contact Name:

Address:

Telephone No:

Fax No:

Email: mikem@primebrandsgroup.com 2AY4Z-SR-WC3N1 Mike Mizrahi 68 35th Street Unit 38, Suite B634, Brooklyn, New York 11232, USA

(732) 876-5350

(732) 876-5353 i. ii.

[Prime Brands Group, Inc.] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification.

[Prime Brands Group, Inc.] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing covered equipment. The applicant must sign this certification. Prime Brands Group, Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Date: 7.26.2023 Applicants Name: Mike Mizrahi Title: CEO Signature 1 The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coveredlist 1/1

C5266091_X10_Ed.1 Prime Brands Group, Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2AY4Z-SR-WC3N1 To Whom It May Concern, Date: 7/26/2023 Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No Short-Term Confidentiality No No No No No No No No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Mike Mizrahi Date: 7/26/2023 Title: CEO 1/1

Prime Brands Group, Inc. Product Similarity Declaration Product name: 3 in 1 Wireless Charging Frame Model name: SR-WC3N1, EWL-22131-A FCC ID: 2AY4Z-SR-WC3N1 We (Prime Brands Group, Inc.) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name and color. Demonstrate the detail (descriptions and pictures) as to the difference list above. Signature:

Name: Mike Mizrahi Title: CEO Date: 7.26.2023

C5266091_X8_Ed.1 Letter of Authorization Company: Prime Brands Group, Inc. Address: 68 35th Street Unit 38, Suite B634, Brooklyn, New York 11232, USA Product Name: 3 in 1 Wireless Charging Frame Model Number: SR-WC3N1, EWL-22131-A FCC Identifier: 2AY4Z-SR-WC3N1 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Mike Mizrahi Date: 7/26/2023 Title: CEO Signature of applicant:

1/1

US Agent for Service of Process LETTER OF ATTESTATION TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process:

Company Name: Prime Brands Group, Inc. FRN: 0030623201 Contact Name: Mike Mizrahi Address: 68 35th Street Unit 38, Suite B634, Brooklyn, New York 11232, USA Telephone No: (732) 876-5350 Email: mikem@primebrandsgroup.com Applicant:

Company name: Prime Brands Group, Inc. Product Description: 3 in 1 Wireless Charging Frame Grantee code:

FCC ID:

Contact Name:

Address:

Telephone No:

Email:

2AY4Z 2AY4Z-SR-WC3N1 Mike Mizrahi 68 35th Street Unit 38, Suite B634, Brooklyn, New York 11232, USA

(732) 876-5350 mikem@primebrandsgroup.com

[Prime Brands Group, Inc.] certifies that, as of the date of this filing of the application with the TCB, [Prime Brands Group, Inc.] is our designated US agent for service of process for the above referenced FCC ID. [Prime Brands Group, Inc.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [Prime Brands Group, Inc.]

accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. Date: 7.26.2023 Applicants Name: Mike Mizrahi US Agents Name: Mike Mizrahi Title: CEO Signature Title: CEO Signature 1/1