PBI Wireless AV-LINK Users Manual PBI v201101 >
A, Introduction......, By WaMming..ccsieeccrecnee C Special announcement of AV-LINK. BD. Contents of Delivery... E, AV-LINK Figure Description. F. Connecting AV-LINK.... G. AV-LINK Connecting Picture..... 1. Transmitter ALT-T1. 2. Receiver AVL-A1. H. Adjustment of AV-LINK......... 1, Technical Parameters. J. Typical Applications of AV-LINK. a>
v2o1101 Introduction PBI Wireless AV-LINK is composed by one Transmitter AVL-Tland one Receiver AVL-R1. With a bijou, exquisite figure, AV-LINK adopts 2.4GHz frequency (This frequency is fully open to the usage of medical and scientific experiments internationally) to transmit audio and video, NTSC or PAL format TV signals, it can get through the walls, floors, and other firm obstacles! The valid transmiiting distance is up to several hundred meters {in open areas). Because of adopting the special structure design belongs to PBI's intellectual property patent, you can plug & play easily and connect it to the AV signals wirelessly transmitted from the satellite receiver, DVD, VCD, projectors and multimedia computers...etc. It's the most efficient and v201101 @>
small monitoring, nursing the best choice of home entertainment, systems. v201101
<a>
Warning Please read this manual clearly before you install and use this product! Any loss caused by mis-installment and mis-use, will not be the manufacturer's and the agents responsibility!
Maintenance must be done by the professionat technicians. Do not open the cover. Do prevent it from the humidity, rainfalls and water, Special Announcement of AV-LINK This product is specially designed for home AV entertainment, although it can be used in video conference, multimedia computer, baby nursing.. etc., it should not be used in any of the following v201101 a applications:
1. Life maintenance system :
2. Disaster monitoring system:
3. All sorts of the guidance system ;
4. Any application might cause injuries and property losses. Before using, users should have a careful analysis and assessment of the possible related or extraneous mistakes when using it, and should have an understanding of the related regulations, safety and ethical responsibility. The manufacturer and the agents will not be responsible for any of the compensation caused by those mentioned above. This product is restricted to the following situations , users should operate it according to the corresponding manuals of the special places.
> v201108 Places restricted by laws:
In the hospital, airport and aircrafts. :
Patient and baby assistant monitoring ;
Nearby the microwave oven:
When interfere with ather communication products. gp ee v201101 6?
Contents of Delivery Open the package please, and check the accessories in the packing box, there should be the following items. If not, please contact the supplier as soon as possible directly. 1. AVL-T1 Transmitter x1:
2. AVL-R1 Receiver x1;
3. 220V or 110V AC/12V DC Power Adaptor x2;
4. 3.5mma AV Cable x2;
5. Users Manual x1:
6. Warranty Card x1. a> v201101 AV-LINK Figure Description AV-LINK includes an AVL-T1 transmitter and an AVL-Ri receiver. v201101 >
Specific Description :
Back view Side view 1. Power Jack: Connect to the power adaptor, and through the adaptor, convert the local power from 110V AC or 220V AC to 12V DC for the use of AV-LINK;
2. AV Jack: Connect to 3.5mme AV cable:
3. Channel Switch: You can choose the channel to transmit
> v201101
(channel chosen by Transmitter should be the same with Receiver):
4. Power Switch: Power on or off the Transmitter or Receiver. Connecting AV-LINK 4 The back side The upper side 1, Please pick out the power adaptor and 3.6mme AV cable from the box, and stretch them straight. v2o1101 <19>
2. Pick out the Transmitter and Receiver, then face to the back of AV-LINK, pull out the base then seize the power cord and 3.5mma AV cable into the concavity on the base. 3. Plug the power cord into the power jack of Transmitter and Receiver. 4, Plug 3,5mme AV cable into the stereo phone jack of Transmitter and Receiver. 6. Stretch straight the power cord and the 3.6mm AV cable. a> v201101 AV-LINK Connecting Picture A. Transmitter AVL-T1 Connect to focal power VCR, VCD. DVD, STB 1, Please turn the power switch of the Transmitter AVL-T1 to OFF v201101 42>
2. Pick out one 3.5mme AV cable, then connect it to the AV jack specified by the word Video/Audio on the downside of Transmitter AVL-T1's back, and the other end of RCA connector, please connect separately to the AV output instruments you want to connect (for example, VCR, VCD, DVD, satellite receiver..). Please note that the color of these three RCA connectors should correspond with those jacks of the AV instruments (in other words, the AV signals input from Transmitter AVL-T1 should correspond with the AV signals provided by AV signal instruments). 3. Pick out a piece of the power adaptor (Please note if the local power supply meets the spec. of the power adaptor! The output voltage of Transmitter AVL-T1 is 12V DC.) Then, plug the output connector of the power adaptor into the power jack at the back of 13> v201101 Transmitter AVL-T1 and plug the input of the power adaptor into local power jack (110V or 220V AC). 4. Turn on the power switch of the Transmitter AVL-T1, then select a channel as transmitting channel, B. Receiver AVL-R1 TV or Monitor Connect to TV fe
{avi [OOO]
avelao 0 1, Please turn the power switch of Receiver AVL-R1 to OFF. 2. Pick out one 3.5mmg@ AV cable, then connect the end with four veotto1 <td>
connectors of it to the AV jack specified by the word Video/Audio* of the downside of the Receiver AVL-Riback. The other end of RCA connectors, piease connect separately to the AV output instruments you want to connect (for exampie, VCR, VCD, DVD, satellite receiver). Please note that the color of these three RCA connectors should correspond with those jacks of the AV instruments (in other words, the AV signals input from the Receiver AVL-R1 should correspond with the AV signals provided by AV signal instruments). 3. Pick out a piece of the power adaptor (please note if the local power supply meets the spec. of the power adaptor! The output voltage of Receiver AVR-T1 is 12V DC.) Then, piug the output connector of the power adaptor into the power jack at the back of 35> y201101 Receiver AVL-R1 and plug the input of the power adaptor into local power jack (110V or 220V AC). 4, Turn on the power switch of the Receiver AVL-R1, and select a channel as receiving channel. Adjustment of AV-LINK 1, The front side of Transmitter AVL-T1 is a patch antenna for transmitting, and the one of Receiver AVL-R1 is for receiving! At an open area without any obstacles, put the Transmitter AVL-T1 v201101 16>
and you will get a better signal and the Receiver AVL-R1 vis-a-vis, reception. v2o1101 ay Technica! Parameters Transmitter AVL-T1 v201401 Transmitter Frequency:
Transmitter Power:
Transmitting Range:
Transmitting Antenna:
AWN Modulation:
AN Input Interface:
Video Input Level:
Audio Input Level:
2.4 to 2.4835 GHz O dBm (FCC), (Model: VS 100T)
+10 dBm (CE), (Model: VS 100TA) 100 meter (FCC) 300 meter (CE) Directional Patch Antenna FM 3.5mm phone jack 1 Vp-p (Max), 75 Ohm 1 Vp-p (Max), 10k Ohm
<a>
Channel:
Power Supply:
Receiver AVL-R1 Receiver Frequency:
Receiver Sensitivity:
Receiver Antenna:
AN Output Interface:
Video Output Level:
Audio Output Level:
Channel:
Power Supply:
19>
3 channels (adjustable) 12V DC, 150mA (Max) 2.4 10 2.4835 GHz
-90 dBm Directional Patch Antenna 3.5mm phone jack 1 Vp-p (Max), 75 Ohm 1Vp-p (Max), 10k Ohm 3 channels ( adjustabie ) 12V DC, 350mA (Max) v201101 AV-LINK Typical Application Ea gettin een wwf] i ase er : )) ) i aan wee A Bus ae ae PS: Because of the patch antenna, you have to adjust the direction of Transmitter and Receiver accordingly when using AV-LINK. v201101 20>