FCC ID: 2AZB26430074203061 Xampion BLE sensor module

FIND OUT MORE ABOUT SAFETY HTTPS://XAMPION.COM/SAFETY-NOTICE/

REQUIREMENTS SPECIFICATION HTTPS://XAMPION.COM/REQUIREMENTS-PECIFICATIONS/

Menu EN FI ES JP FR Safety notice Use this product only according instruction described in the user guide. FCC Part 15 Clause 15.21: Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment Contains small parts which may be a choking hazard. Not suitable for children under age 3. Do not dry the product in a microwave, oven, or with any other source of heat. It is safe to rinse the sensors and the Micro USB port under running water. Dry with cloth after rinsing and store in room temperature. Do not use any chemical for cleaning. Do not drop or allow the sensors to be immersed in water or other liquid. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Howev er, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Click here for Canada specic notice Symbol indicates that the item shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for recycling of electrical and electronic equipment. enter search term DISCLAIMER Progda Oy / Ltd and Xampion disclaims any and all liabilities related to third parties products and services. Xampion Menu Wearable Sports Tech for Future Champions Subscribe Get the latest news. (email) Subscribe Headquarters Company Info Progda Oy Kaarikatu 8 20760 Piispanristi Kaarina, Finland ID: FI27611805 Contact sales@xampion.com Terms & Policies Menu Xampion Service Terms of Use Xampion Service Privacy Policy Xampion Service General Terms and Conditions for Private Customers Xampion 2021 We value your privacy. We use cookies to track anonymous information about our visitors to improve your experience. Find out more. Okay, thanks Menu EN FI ES JP FR Additional safety notice for Canada CAN ICES-3 (B)/NMB-3(B) This device complies with Industry Canadas license-exempt RSSs. Operation is subject to the following two conditions:

(1)This device may not cause interference; and

(2)This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrieCanada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

1) lappareil ne doit pas produire de brouillage;

2) lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Xampion Wearable Sports Tech for Future Champions Subscribe Get the latest news. (email) Subscribe Menu Headquarters Company Info Progda Oy Kaarikatu 8 20760 Piispanristi Kaarina, Finland ID: FI27611805 Contact sales@xampion.com Terms & Policies Xampion Service Terms of Use Xampion Service Privacy Policy Xampion Service General Terms and Conditions for Private Customers Xampion 2021 We value your privacy. We use cookies to track anonymous information about our visitors to improve your experience. Find out more. Okay, thanks

SensornlD XAMPION ggqqq C & @ FE ws XAMPION co FCC ID: 2AZB26430074203061

+ IC: 27068-PROGDAHW3

<p [Roi3wwa XXXXXXX e

Progda Oy/Ltd Kaarikatu 8 20760 Piispanristi Finland info@progda.com Date (08/04/2021) TUV SUD America Inc. 10 Centennial Drive Peabody, MA 01960, USA Dear Sir or Madam, We, (Progda Oy/Ltd, Kaarikatu 8, 20760 Piispanristi, Finland) hereby authorize Andy Zhang and Marley Sealey of TUV SUD America, 10040 Mesa Rim Road, San Diego, CA, 92121 and to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. Yours sincerely, Name: Tero Suominen Title: Chairman of the Board

Date (2021-05-18) Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Confidentiality Request FCC ID:

Schematics Bill of Materials/Parts List Block Diagrams Theory of Operation (Operation description) Internal Photos External Photos User Manual Test Set-up Photographs Yours sincerely, Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commissions Rules, Progda Oy/Ltd hereby requests permanent confidential treatment of information accompanying this application as outlined below:

Progda Oy/Ltd also hereby requests short-term confidential treatment of information accompanying this application as outlined below for a period of period of 180 days:

The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application.

Date (2021-05-18) Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Modular Approval Request FCC ID: 2AZB26430074203061 The following attestation addresses the requirements to support modular approval:

Modular approval requirement Yes (provide brief statement) No *

(a) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly

(b) The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal

(c) The module must contain power supply regulation on the module

(d) The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b)

(e) The module must demonstrate compliance in a stand-alone configuration

(f) The module must be labelled with its permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements) Yes, Progda Xampion PWB design included RF shield which cover all the BLE main module circuit components. Yes, The Xampion PWB design is based on Nordic semiconductor nRF52832 BLE microcontroller module with buffered modulation/data inputs. Design included Li-Ion/Polymer battery charger circuit which regulates battery charging levels and LDO circuit to regulate output level accuracy. Antenna design included SMD mounted Ceramic chip Antenna. Chip antenna is tuned to operate most efficiency at Bluetooth frequencies. Yes, module can compliance at stand-alone configuration. Yes, Module will be having permanently affixed FCC ID label information laser engraved to the mechanic cover.

(g) The module must comply with all specific rules applicable to the transmitter. The grantee must provide comprehensive instructions to explain compliance requirements Yes, Transmitter design is based on Nordic semiconductor nRF52832 BLE microcontroller module and same baseline has been comply approved in many similar designs. Modular approval requirement Yes (provide brief statement) No *

(h) The module must comply with RF exposure requirements Our design baseline and Xampion design at FCC testing module comply with all RF exposure requirements.

* Please provide a detailed explanation if the answer is No. Yours sincerely,