Progress Rail A Caterpillar Company November 15, 2023 LOCOMOTIVE SPEED SENSOR OPERATORS MANUAL Progress Rail Locomotive, Inc. (PRL) does not issue an operators manual for the locomotive Speed Sensor assembly (PRL part number 40256201). The speed sensor is an integral part of the locomotive control system. The customer does not have control of its functions. the locomotive. This. is used internally for designing the application on various s locomotive models. Also, the customer uses this document for repair if the mounting is damaged. If the speed sensor is inoperative or fails the internal test, it is returned to PRL for factory repair, no information is supplied to the customer for repairing the speed sensor. 1) FCC Interference Statement (Part 15.105 (b)) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the manufactures installation, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to contact Progress Rail Locomotive, Inc.
(PRL) for assistance. 2) FCC Part 15 Clause 15.21 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Progress Rail Locomotive Inc. e 9301 W. 55" Street e La Grange, IL 60525 USA e +1.708.387.6000 Progress Rail, A Caterpillar Company 3) FCC Part 15 Clause 15.19(a) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 4) ISED RSS-Gen Notice:
This device contains licence-exempt transmitter(s) /receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device. Lemetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
Lappareil ne doit pas produire de brouillage;
Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. 5) ISED Canada ICES-003 Compliance Label:
CAN ICES-3 (B)/NMB-3(B) Brian Koldoff Senior Project Engineer Caterpillar: Confidential Green