FCC ID: 2A6P9-AUTOSKYUS GPS TRACKER

GPS tracker AVT-200 The AVT-200 is a Mini GPS tracker designed for a wide range of vehicle tracking application. Its internal GPS antenna has superior sensitivity and fast time to be located. Its 4G and Quad Band GSM system supports both 4G and 2G network allowing the AVT-200s location to be monitored in real time or periodically tracked by a backend server and mobile devices. Technician parameter Name Parameter Gift Box Dimension 130*98*40mm Color Black Working voltage 9V 90 V DC Working current 60-80 mA12V/DC Back-up battery Built-in Tracker size 95*40*14 mm Weight Tracker weight 0.05kg Total packet 0.08kg Working temperature

-45 -- 85 Moisture 5% -- 95%Non-water vapor condensation state 4G& GSM Frequency 850MHz/1900 MHz Quad-band LTE-FDD B2/B4/B5/B66 GPS Sensitivity

-159Db GPS Frequency 1575.42 MHz 1 / 3 Receiving panel structure GPS module 96-channel Locating accuracy

< 2.5m CEP 95 Cold start time

< 35s(in average hot start time

< 1s (in average LED indicator light usage of green / red dual-color LED indicator light shows the GPS

/ network status 4G/GSM & GNSS Chipset SIMCOM LTE Cat 1 Module (Industry M2M modem) Input and Output Waterproof housing , Ignition ON/OFF Detection, Support firmware updated by air (OTA), mini-USB port for data reading and configure;

support GPRS blank area data record and re-upload 2 / 3 FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC RF exposure statement:

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body. 3 / 3

C5266091_X10_Ed.1 Promaster Electronic LLC Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2A6P9-AUTOSKYUS To Whom It May Concern, Date: 9/6/2022 Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No Short-Term Confidentiality No No No No No No No No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Antonio Lopez Date: 9/6/2022 Title: President 1/1

Promaster Electronic LLC Model difference statement Product Name: GPS TRACKER Model No.: AVT-200, APT-100, APT-110, APT-120, AVT-210 We (Promaster Electronic LLC., 25511 Budde Rd, Ste 1602, The Woodlands, Texas, 77380, USA) hereby state that all the models are the same circuit and RF module, except the model name and plastic casings. Signature:

Name: Antonio Lopez Title: President Tel: (832) 813-5123 Email: admin@promasterelectronic.com Date: 8.29.2022

C5266091_X8_Ed.1 Letter of Authorization Company: Promaster Electronic LLC Address: 25511 Budde Rd, Ste 1602, The Woodlands, Texas, 77380, USA Product Name: GPS TRACKER Model Number: AVT-200, APT-100, APT-110, APT-120, AVT-210 FCC Identifier: 2A6P9-AUTOSKYUS We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Antonio Lopez Date: 8/29/2022 Title: President Signature of applicant:

1/1

< Promaster Electronic LLC >

Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject:

Request for 484596 D01 Referencing Test Data Date:2022/9/20 Company: Promaster Electronic LLC Address: 25511 Budde Rd, Ste 1602, The Woodlands, Texas, 77380, USA Product Name: GPS TRACKER Model Number(s): AVT-200, APT-100, APT-110, APT-120, AVT-210 GPS TRACKER AVT-200 2A6P9-AUTOSKYUS is installed the module A7670SA/A7670SA miniPCIE2AJYU-8BAE002. The modules original FCC ID is 2AJYU-8BAE001, grant date is 12/10/2021 The GPS TRACKERAVT-200 has not change the module hardware and software radio frequency parameters, GPS TRACKER is different than the antenna gain and antenna type when the original module is certified. Reducing the BLE is by software. The test report of the module A7670SA/A7670SA miniPCIE2AJYU-8BAE002 can Partialy verify that the tracker GPS TRACKERAVT-200, APT-100, APT-110, APT-

120, AVT-210 meets the requirements. referenced test items see table below Item Description of Test 1 2 3 4 5 RF Output Power Peak-to-Average Ratio 99% and -26 dB Occupied Bandwidth Band edge at antenna terminals Frequency Stability for Temperature

&Voltage Reference report Number: I21W00032-WWAN_Rev2 Signature: Name of Signatory:

Date: 2022/9/20 Thanks and Best Regards,

(New Applicant phone) (832) 813-5123

(New Applicant Email) admin@promasterelectronic.com 1/1

Letter of Authorization

< SIMCom Wireless Solutions Limited>

Communications Commission Federal 7435 Oakland Columbia, USA MD 21046 Mills Road Date:2022/9/14 Gentlemen, The lettegrantsauthorization requests This application a dataeusebased on 2AJYU-8BAE002 a new FCC ID for purpose for representative will establish of Promaster for a currently Electronic LLC approved device. of marketing. The device included FCC ID: 2AJYU-8BAE002 hadwareof the device/

The only change being the Antenna Solution Ltd. will remain in effect. the module Grant for SIMCom Wireless with a Grant Date of 2021/12/28, be changed cannot module 2AJYU-8BAE002 Solution Ltd., under The software in any way . and gain. The original grant to SIMCom Wireless Original Grantee Signature) Yi Wu

(Original

(Original Applicant Company) Applicant SIMCom Wireless Building Solution 3, No.289 Linhong Ltd. Road Shanghai, Address) 200335 China

(Original

(Original Applicant Applicant phone) Email) 1/1