FCC ID: QAM-AP9-WIFIBT-AB ActivPanel 9 WiFi and Bluetooth Module

Quick Install Guide TP-3165 ActivPanel 9 Wi-Fi and Bluetooth Module V01 1 2 https://support.prometheanworld.com Safety Guide TP-3166 2 ActivPanel 9 Wi-Fi and Bluetooth Module Quick Install Guide TP x1 x3 TP-3165 x1 ActivPanel 9 Wi-Fi and Bluetooth Module Quick Install Guide 3 1 2 3 4 ActivPanel 9 Wi-Fi and Bluetooth Module Quick Install Guide 4 ActivPanel 9 Wi-Fi and Bluetooth Module Quick Install Guide 5 AP9-WIFIBT-AB EN English Copyright information TP-3165-EN-V01 2022 Promethean Limited. All rights reserved. All software, resources, drivers and documentation supplied in the Promethean ActivInspire download are copyright Promethean Limited 2022. Promethean grants a license to install and use Promethean ActivInspire software, including any resources, drivers and documentation supplied in the download. Refer to the licence agreement for information about the terms and conditions of this licence. Promethean is owner of a number of trademarks in several jurisdictions across the world. The Promethean products documented in this guide include aspects which are protected under their respective patent, copyright, design copyright, registered design and trademark laws. The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. VESA is a registered mark of Video Electronics Standards Association. Apple is a trademark or registered trademark of Apple, Inc. in the United States and other countries. Windows is a registered trademark or trademark of Microsoft Corporation in the United States and other countries. Linux is a registered trademark of Linus Torvalds in the United States and other countries. All other trademarks remain the property of their respective owners. This guide is distributed online. It may only be reproduced for use within the institution in which the product is used. For use outside of your institution, no part of this guide may be reproduced, transmitted, stored in a retrieval system or translated into any other language without the prior permission of Promethean Limited. Please note that the content in this guide is protected under copyright law. Although every care has been taken in the compilation of this guide, Promethean Limited accepts no responsibility for errors or omissions, or for damages resulting from the use of information contained within this guide. Compliance United States of America FCCpart15.105 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. 6 EN English ActivPanel 9 Wi-Fi and Bluetooth Module Quick Install Guide This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to FCCpart15.19 undesired operation. FCCpart15.21 operate the equipment. FCCpart15.407 co-channel mobile satellite systems. FCCPart407 The device shall automatically discontinue transmission in cases of absence of information to transmit, or operational failure. Then it will scan the available radio signals. If this signal is connected before, it will be automatically connected, otherwise manual connections will be necessary. The end product must carry a label stating Contains FCC ID: QAM-AP9-WIFIBT-AB. The devices must be installed and used in strict accordance with the manufacturers instructions as described in the user LimitedModularApproval documentation that comes with the product. The module must be installed in an ActivPanel. In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. FCC ID: QAM-AP9-WIFIBT-AB. This device complies with FCC part 15C: 15.247 and 15.407. state this information to the host instruction manual. Trace antenna designs - not applicable. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. The module should be installed at a minimum distance of 20 cm away from a person nearby. The host product manufacturer should ActivPanel 9 Wi-Fi and Bluetooth Module Quick Install Guide EN English 7 This modular complies with FCC RF radiation exposure limits set for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This modular must be installed and operated with a minimum distance of 20 cm between the radiator and the user's body. Any final host product with the modular transmitter installed should be under test according to guidance given in KDB996369D04. To enter test mode for module, secure CRT command is necessary. When something wrong happens in configuring test modes for host product with module, host product manufacturer should coordinate with module manufacturer for technical support. It is recommended that some investigative measurements should be taken to confirm that host product with module installed does not exceed the spurious emissions limits or band edge limits. The modular complies with FCC authorised for the specific rule parts (FCC Part 15.2477 and 15.407) list on the grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. The final host product still requires Part 15 subpart B compliance testing with the modular transmitter installed when contains digital circuity. Model name: ActivPanel 9 Wi-Fi and Bluetooth Module Product description: 2.4GHz and 5GHz Wi-Fi and Bluetooth Module Antenna type Antenna gain External Antenna WLAN 2412MHz to 2472MHz: Max gain: 3.9dBi WLAN 5150MHz to 5250MHz: Max gain: 5.3dBi WLAN 5250MHz to 5350MHz: Max gain: 4.4dBi WLAN 5470MHz to 5725MHz: Max gain: 3dBi WLAN 5725MHz to 5850MHz: Max gain: 3.2dBi FrequencyBandsandPower Frequency band Power (dBm) Bluetooth 2402 to 2480 MHz

<20 WLAN 2412MHz to 2472MHz

<20 WLAN 5150MHz to 5250MHz

<23 WLAN 5250MHz to 5350MHz

<20 WLAN 5470MHz to 5725MHz

<20 WLAN 5725MHz to 5850MHz

<14 Manufacturer's name and address: Promethean Limited Promethean House, Whitebirk Industrial Estate, Lower Philips Rd, Blackburn BB15TH. Canada This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. 8 EN English ActivPanel 9 Wi-Fi and Bluetooth Module Quick Install Guide The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. IC: 5459A-AP9WIFIBTAB The end product must carry a label stating Contains IC: 5459A-AP9WIFIBTAB. This radio transmitter (IC: 5459A-AP9WIFIBTAB) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. FrequencyBandsandPower Frequency band Power (dBm) Bluetooth 2402 to 2480 MHz

<20 WLAN 2412MHz to 2472MHz

<20 WLAN 5150MHz to 5250MHz

<23 WLAN 5250MHz to 5350MHz

<20 WLAN 5470MHz to 5725MHz

<20 WLAN 5725MHz to 5850MHz

<14 Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. Lappareil ne doit pas produire de brouillage;

fonctionnement. 2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le Cet appareil, conu pour fonctionner dans la bande 5150 5250 MHz, est destin uniquement une utilisation intrieure afin de rduire les interfrences nfastes qui pourraient perturber les systmes satellites mobiles utilisant les canaux adjacents. Toute modification ou amlioration qui n'a pas t explicitement approuve par la partie responsable de la conformit peut annuler le droit de l'utilisateur faire fonctionner l'appareil. IC: 5459A-AP9WIFIBTAB Le produit final doit comporter une tiquette mentionnant Contient IC: 5459A-AP9WIFIBTAB . Cet metteur radio (IC: 5459A-AP9WIFIBTAB) a t approuv par Industry Canada pour fonctionner avec les types dantennes lists ci-dessous et avec le gain maximum admissible mentionn. Lutilisation de types dantennes non mentionns dans cette liste, ayant un gain suprieur au gain maximum indiqu pour le type donn, est strictement interdite avec cet appareil. ActivPanel 9 Wi-Fi and Bluetooth Module Quick Install Guide EN English 9 FrequencyBandsandPower Frequency band Power (dBm) Bluetooth 2402 to 2480 MHz

<20 WLAN 2412MHz to 2472MHz

<20 WLAN 5150MHz to 5250MHz

<23 WLAN 5250MHz to 5350MHz

<20 WLAN 5470MHz to 5725MHz

<20 WLAN 5725MHz to 5850MHz

<14 Manufacturer's name and address: Promethean Limited Promethean House, Whitebirk Industrial Estate, Lower Philips Rd, Blackburn BB15TH. Europe We Promethean Limited declare under our Sole responsibility that the ActivPanel 9 Wi-Fi and Bluetooth Module; Model No: AP9-

WIFIBT-AB; conforms to the essential requirements of European Union Directive 2014/53/EU Radio Equipment Directive (RED) and 2011/65/EU Restriction of Hazardous Substances in Electrical and Electronic Equipment. The full text of the EU declaration of conformity is available at the following internet address:

https://support.prometheanworld.com WARNING AP9-WIFIBT-AB is Class B product. In a domestic environment, they may cause interference in which case the user may be required to take adequate measures. AP9-WIFIBT-AB is for internal use only. The device complies with RFspecifications when the device is used at 20cm from your body. 10 EN English ActivPanel 9 Wi-Fi and Bluetooth Module Quick Install Guide Manufacturer's name and address: Promethean Limited Promethean House, Whitebirk Industrial Estate, Lower Philips Rd, Blackburn BB15TH. United Kingdom We Promethean Limited, declare under our sole responsibility that this product conforms to the essential requirements of UK Legislation: RED Radio Equipment Regulation 2017 UKSI2017No.1206, LVD The Electrical Equipment (Safety) Regulations 2016 UKSI2016No.1101, RoHS Restriction of the use of certain Hazardous Substances in Electrical and Electronic Regulations The full United Kingdom Declaration of Conformity can be found by searching for the model name at FrequencyBandsandPower Frequency band Power (dBm) Bluetooth 2402 to 2480 MHz

<20 WLAN 2412MHz to 2472MHz

<20 WLAN 5150MHz to 5250MHz

<23 WLAN 5250MHz to 5350MHz

<20 WLAN 5470MHz to 5725MHz

<20 WLAN 5725MHz to 5850MHz

<14 2012 UKSI2012No.3032. support.prometheanworld.com. FrequencyBandsandPower Frequency band Power (dBm) Bluetooth 2402 to 2480 MHz

<20 WLAN 2412MHz to 2472MHz

<20 WLAN 5150MHz to 5250MHz

<23 WLAN 5250MHz to 5350MHz

<20 WLAN 5470MHz to 5725MHz

<20 WLAN 5725MHz to 5850MHz

<14 ActivPanel 9 Wi-Fi and Bluetooth Module Quick Install Guide EN English 11 Antenna type Antenna gain External Antenna WLAN 2412MHz to 2472MHz: Max gain: 3.9dBi WLAN 5150MHz to 5250MHz: Max gain: 5.3dBi WLAN 5250MHz to 5350MHz: Max gain: 4.4dBi WLAN 5470MHz to 5725MHz: Max gain: 3dBi WLAN 5725MHz to 5850MHz: Max gain: 3.2dBi WARNING AP9-WIFIBT-AB is Class B product. In a domestic environment, they may cause interference in which case the user may be required to take adequate measures. AP9-WIFIBT-AB is for internal use only. The device complies with RFspecifications when the device is used at 20cm from your body. Manufacturer's name and address: Promethean Limited Promethean House, Whitebirk Industrial Estate, Lower Philips Rd, Blackburn BB15TH. Waste Electrical and Electronic Equipment (WEEE) For more information concerning the correct disposal of these products, please contact your Promethean reseller. Address: 125315, Moscow, Leningradskiy prospect, 80KD, 3rd Floor, Apartment III, Room 32B. Russian importer details LLC STARTTEH Registration No.: 5137746235853. INN/KPP: 7743911253/774301001 Rated power consumption: 12-19 V 60 W Model Year of manufacture Week of manufacture Serial number WFC 22 01 10000001 12 EN English ActivPanel 9 Wi-Fi and Bluetooth Module Quick Install Guide SN: WFC220110000001 TP-3165-EN-V01 2022 Promethean Limited. All Rights Reserved. Products are subject to availability by country. Product specifications are subject to change without notice. ActivPanel 9 Wi-Fi and Bluetooth Module Quick Install Guide EN English 13

NOTES 1) IMPORTANT: LABEL TO BE MANUFACTURED BY UL APPROVED SUPPLIER 2) LABEL DIMENSIONS:

110.0 0

. 8 3 5 4 x 1

. 3 3) LABEL ARTWORK:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3(B) / NMB-3(B) Model Number : AP9-WIFIBT-AB Description : AP9 WiFi and Bluetooth Module Input : 5V 500mA 2.5W Manufacturer : Promethean Limited FCC ID: QAM-AP9-WIFIBT-AB IC: 5459A-AP9WIFIBTAB TRA Registered No: ER70164/19 Dealer No: DA46262 NTC Type Accepted No: ESD-1919248C CCAH19LP0280T1 AGREE PAR LANRT MAROC Numro dagrment: MR 19275 ANRT 2019 Date dagrment :04/04/2019 Made in China Promethean Ltd, Promethean House, Lower Philips Road, Blackburn, Lancashire, BB1 5TH, United Kingdom www.PrometheanWorld.com TA-2018/3969 APPROVED OMAN-TR TRA/TA-R/7093/19 D17238 TRC type approval No: TRC/SS/2019/112 R 2 0 1

1 9 0 0 6 3 C M I T I D

2 0 1 9 A P 2 7 7 8 R-NZ D A 1 0 5 2 8 2 I M D A S t a n d a d r C o m p l i e s w i t h ACCESSORY E242827 PROMETHEAN Promethean House, Lower Philips Rd, Blackburn, BB1 5TH, UK T: +44 (0) 1254 298598 F: +44 (0) 1254 581574 ECN No. DATE APPROVED BY NPI-10725 25/01/2022 C. DAWSON REFER TO PLM FOR FULL CHANGE HISTORY APPROVALS UL RATING N/A CofC YES 2021 Promethean Limited. All rights reserved Copyright This document and the information contained within it are provided in confidence for the sole purpose of manufacturing of articles for Promethean Limited, and may not be disclosed to any third party or used for any other purpose without the express written permission of Promethean Limited. SAFETY CRITICAL DNP NO NO DESIGNED BY:

C. DAWSON 29/07/2021 CHECKED BY:

. APPROVED BY:

. DESCRIPTION DRAWING NO. 749 3031 PROJECT CODE IWS.000117 TOLERANCE UOS x x,x x,xx ANGLES 0.5 0.25 0.10 0.25 UNLESS OTHERWISE SPECIFIED 3RD ANGLE PROJECTION THIS COMPONENT MUST BE ROHS COMPLIANT CAD MODEL IS MASTER. DO NOT SCALE DRAWING, IF IN DOUBT ASK. ALL DIMENSIONS IN mm. SCALE 1:1 DRAWING SIZE A4 SHEET 1 OF 1 MATERIAL COLOUR

SC PC REV FINISH LB PN P003 MATT BLACK TC ADHESIVE PERMANENT AP9 WIFI MODULE DRAFT APPROVALS LABEL POLYESTER CVMWPT50 Label location

< Promethean Ltd >

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date:2022/3/5 Subject: Request for Confidentiality FCC ID: QAM-AP9-WIFIBT-AB To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No No Short-Term Confidentiality No No No No No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: John Harrison Title: Head of Product Compliance and Certification. 1/1

Letter of Authorization

< Promethean Ltd>

Company: Promethean Ltd Address: Promethean House, Lower Philips Rd, Blackburn, United Kingdom, BB1 5TH Product Name: ActivPanel 9 WiFi and Bluetooth Module Model Number: AP9-WIFIBT-AB FCC Identifier: QAM-AP9-WIFIBT-AB We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: John Harrison Title: Head of Product Compliance and Certification. Date: 2022/3/5 Signature of applicant:

1/1

< Promethean Ltd>

Modular Transmitter Approval Request Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Company name: Promethean Ltd FCC ID: QAM-AP9-WIFIBT-AB Gentlemen, In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 Module Certification Guide v02. FCC ID QAM-AP9-WIFIBT-AB has been examined against the following requirements. Requirement per 15.212 and KDB 996369 D01 Modular Certification Guide v02 The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal Explanation from Grantee

(do not write yes/no, but explain why product complies/how it is achieved) Shielding is provided by a metal cover over the circuitry. All modulation and data inputs are buffered by circuitry on the transmitter chip. The module must contain power supply regulation on the module Power supply regulation is provided by circuitry on the transmitter chip. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) The module must demonstrate compliance in a stand-alone configuration The module must be labelled with its permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements) The module must comply with all specific rules applicable to the transmitter including all the conditions provided in the integration instructions by the grantee The module must comply with RF exposure requirements The antenna module with coupling . is connected the the means of unique to Testing was performed with the module extended outside of the host on a special extender board, as shown in the test setup photos. A sample of the host label is provided as an exhibit, showing the FCC identifier of the module. The module complies the requirements of Part 15 operating section C &E as demonstrated in the test report exhibit. fully with Yes, Please see the MPE report, the modular meets MPE calculation. Name: John Harrison Date: 2022/3/5 Title: Head of Product Compliance and Certification. Signature of applicant 1/1

< Promethean Ltd >

FCC Software Configuration Control Declaration Date: 2022/3/5 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. Product/ Model Number:

ActivPanel 9 WiFi and Bluetooth Module/AP9-WIFIBT-AB Regarding FCC Country Code Selection guidelines identified in KDB 594280. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Signature of applicant Name: John Harrison Title: Head of Product Compliance and Certification. 1/1 1/1