CHIPS ULTRA 2.0 TRUE WIRELESS HELMET AUDIO CONTENTS WHATS INSIDE FUNCTIONS LEFT RIGHT CHARGING-THE CASE CHARGING-THE CHIPS LEFT EAR PIECE RIGHT EAR PIECE ANATOMY LEFT EAR BUTTON A RIGHT EAR BUTTON B Hi. C C D Good call on picking up the Outdoor Tech Chips Ultra 2.0 true wireless helmet audio. Your experience of the universe will soon be enhanced. This manual exists to help make sure that you use them correctly, so youre definitely going to want to relax for a hot second and look through this. Kisses, What's Inside ...................................................... 1 Anatomy ............................................................2 Functions ...........................................................3 Charging The Case .............................................4 Charging The Chips ............................................5 Pairing ...............................................................6 Music Functions ................................................7 Volume Controls ................................................9 Put The Chips Ultra 2.0 in Your Helmet ............. 10 Specs ................................................................ 11 Care And Maintenance ..................................... 12 Phone Functions ................................................8 NEW Faster Charging - USB to USB-C cable E CHARGING CASE Left and right helmet audio Charging case USB-C charging cable Instruction manual One ODT sticker A. Left ear button B. Right ear button C. LED light D. Microphone E. Hi-Fi Speakers Charge up the case so you always have power for your Chips Ultra 2.0 on the go. Charge your Chips Ultra 2.0 on the way to the hill, instead of having to plug them in the night before. Fast charging with the new USB-C cable. Once the charging case is plugged in the indicator light on the front will turn RED- (CHARGING). It will turn GREEN once the case is completely charged. Case total charging time: 1.5 hours to fully charge the case. Gently plug the three holes on the side of the Chips Ultra 2.0 into the three prongs in the charging case. Be sure to put the Left Chip in the Left side and the Right Chip in the Right side in the charging case. The LED lights on both Chips will be RED - (CHARGING). Once both LEDs go off the Chips are fully charged. Chips Ultra 2.0 total charging time: About 2 hours FUNCTION EARPIECE ACTION Power On Power On Power Off Power Off Answer Reject Hang Up Play Pause LEFT Long press for 3 sec RIGHT Long press for 3 sec LEFT Press and hold for 4 sec RIGHT Press and hold for 4 sec RIGHT Short press once RIGHT Long press for 2 sec RIGHT Short press once RIGHT Short press once RIGHT Short press once Skip Forward RIGHT Short press twice Skip Backward RIGHT Short press three times Raise Volume LEFT Short press once Lower Volume LEFT Short press twice Siri/Voice Activation RIGHT Long press 1 sec Reset Chips Ultra/
Clear BT Memory Refer to the paper insert in the box for instructions 1 2 3 4 5 LEFT RIGHT Power On/Off Power On/Off Pairing Mode Play/Pause Answer/End/Reject Call Volume Up/Down LEFT RIGHT Skip Forward Power On/Off Power On/Off Pairing Mode Play/Pause Volume Up/Down Answer/End/Reject Call Skip Forward LEFT PAIRING ADVANCED CHIP SET FOR BETTER CONNECTION Bluetooth 5.0 RIGHT 14HOURS LONGER PLAY /TALK TIME 14 HOURS POWER ON THE RIGHT
(long press 3 seconds) VOICE PROMPT:
power on >> battery level >> pairing Choose: ODT Chips Ultra 2.0 in your phones Bluetooth settings. VOICE PROMPT: device connected POWER ON THE LEFT
(long press 3 seconds) VOICE PROMPT: power on >> connected MUSIC FUNCTIONS PHONE FUNCTIONS VOLUME CONTROLS PUT THE CHIPS ULTRA 2.0 IN YOUR HELMET SPECS CARE & MAINTENANCE RIGHT RIGHT LEFT FUNCTION ACTION FUNCTION ACTION FUNCTION ACTION POWER ON long press 3 seconds ANSWER CALL short press 1x POWER ON long press 3 seconds POWER OFF Press and hold 4 seconds END CALL short press 1x POWER OFF Press and hold 4 seconds PLAY PAUSE short press 1x short press 1x SKIP FORWARD short press 2x SKIP BACKWARD short press 3x REJECT CALL long press 2 seconds SIRI / VOICE ACTIVATION long press 1x VOLUME UP short press 1x VOLUME DOWN short press 2x 2. Rock out, make calls, and, you know, ski and snowboard and whatnot. ITS EASY!
JUST SLIDE THEM IN No wires, no cords, just slide them into your helmet ear pads and your ready to hit the slopes. 1. Drop the CHIPS Ultra 2.0 into the slots inside your helmet liner. ITS EASY!
JUST SLIDE THEM IN No wires, no cords, just slide them into Bluetooth version: Bluetooth 5.0+ EDR your helmet ear Bluetooth profiles: A2DP, AVRCP, HSP, HFP pads and your Driver units: 40mm Neodymium magnet ready to hit the slopes. Frequency Response: 20~20,000 Hz Impedance: 32 + 32 ohms Sensitivity (1kHz): 110 dB Range: Up to 10m/33ft Microphone: Built-in microphone Battery: 3.7V, 250 mAh Chips Charging time: About 2 hours Play / Talk time: Up to 14 hours CHARGING CASE Charging time: 1.5 hours (DC 5V 2A) Battery: 3.7V 2000 mAh
-Keep the Chips Ultra 2.0 away from direct sunlight or hot places. High temperatures will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
-Do not try to disassemble the CHIPS Ultra 2.0.
-Do not let the Chips Ultra 2.0 fall onto the floor or other hard surfaces. The internal circuit board may get damaged.
-Do not use intensive chemical products or detergent to clean the product.
-Do not scratch the surface with sharp things. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage, et
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. FCC& IC Radiation Exposure Statement:
This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Dclaration dIC sur lexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux radiations dfinies par le Canada pour des environnements non contrls. Cet metteur ne doit pas tre install au mme endroit ni utilis avec une autre antenne ou un autre metteur. DONT BE SO ANTISOCIAL Facebook.com/outdoortechnology Twitter & Instagram: @outdoortech Questions, comments, complaints, secret desires, or just to say whats up: email info@outdoortech.com K bye. 6 7 8 9 10 11 12 outdoortech.com