LEFT RIGHT ANATOMY FUNCTIONS FUNCTIONS PAIRING CHARGING SPECS THE KOMODOS WIRELESS HEADPHONES Previous Next Volume Down FUNCTION ACTION FUNCTION ACTION POWER ON POWER OFF Press "MFB" button for 3 seconds when the device is off. (Red LED light and a tone voice beep) Press "MFB" button for 3 seconds when the device is on. (A tone voice beep and all LED lights are off) ENTER PAIRING MODE In power off mode, Press the "MFB" button and hold for 8 seconds. (Blue LED and Red LED will flash with two beep tone voice) END CALL ANSWER CALL Short click "MFB" button while on the call Short click "MFB" button while call is coming in Power On/Off Pairing Mode Play/Pause Answer/End/Reject Call Power On/Off Volume Up/Down Skip Forward Double click "MFB" button in the connected state or there is music. Double click "MFB" button to transfer the call between phone and device while on call. LAST NUMBER REDIAL TRANSFER CALL REJECT CALL Press the "MFB" button for 1-2 seconds to reject call when call is ringing. Good call on picking up the Outdoor Tech Komodos Wireless Headphones. Your experience of the universe will soon be enhanced wirelessly. This manual exists to help make sure that you use them correctly, so youre definitely going to want to relax for a hot second and look through this manual. Kisses, 3.5mm Audio Jack Micro USB Charge Port Microphone VOLUME UP Press the "+" and hold VOLUME DOWN Press the "-" and hold PREVIOUS Short click " " button NEXT Short click " " button What's included:
PLAY / PAUSE Click "MFB" button to play music or pause music LOW BATTERY WARNING Red LED will flash CHARGING Plug the charge cord to device and to power source.
(Red LED is on) FACTORY RESET Long press "+" and "-" buttons for 5 seconds at pairing mode to clear the paired device list PAIRING TO MOBILE PHONE OR OTHER DEVICE. Once The Komodos are paired to a device, they will remain paired and automatically recognize each other whenever they are within range. Volume Up
(MFB) Multi Function Button Turn on/off Enter Paring Mode Answer Call Reject Call End Call Last Number Redial Play/Pause
-USB to Micro USB Charge Cable
-3.5mm to 3.5mm Audio Cable
-User Manual
-Sticker PAIRING TO A PHONE OR ENTERTAINMENT SYSTEM Turn on your phone and ensure its Bluetooth function is activated Turn on the Komodos and go to the pairing mode On your phone, under Bluetooth devices - search for
"ODT Komodos" and select it Your phone will request a passkey or PIN, enter 0000 as your PIN or passkey Your phone will confirm the pairing, and then press Yes/Ok You can also control the player by operating the device PAIRING TO A COMPUTER Ensure your Bluetooth function is activated on your com-
puter Go to pairing mode Open Bluetooth and select "Search for Bluetooth devices"
After a few seconds "ODT Komodos" will show up in the list of Bluetooth devices. Select it and select "pairing"
then select "connect with audio device"
Open your media player software to play music, watch TV/movies and play games PLAYING AUDIO VIA AUX CABLE Plug one end of the 3.5mm AUX cable to your Komodos and the other end into your mobile/tablet/computer Make sure the Komodos aren't already paired to another device CHARGING YOUR KOMODOS HEADPHONES Connect the USB - Micro USB cable to a power source Charge for at least 6 hours before initial use While charging the red LED will be solid When charge is complete the red LED will turn off and blue LED will turn on Warning: Make sure you select a qualified charger from a regular manufacturer. You will need to recharge the Komodos headphones if they have not been used for more than 12 months. Bluetooth version ..................................... V5.0 Bluetooth profiles ....A2DP1.3, AVRCP1.5, HFP1.7 Operating distance ............. 33 feet, 10 meters Frequency Response................... 20Hz-20KHz Loudspeaker Output .............................. 20mW Signal-To-Noise..................................... >90dB THD ...........................................................<3%
Play Time .............................. about 12.5 hours Charging Time ......................... about 1.5 hours Dimensions (LxWxH) ............ 151 x 63 x 182mm Weight ......................................................150g KOMODOS
Manuel de lutilisateur 1. Introduction 3. Schma des connexions Rsultat souhait
Appariement un tlphone et divertissement :
4.3 Batterie interne rechargeable au lithium-polymre
vous devez dabord vous familiariser avec la fonctionnalit Bluetooth de votre tlphone cellulaire ou dautres appareils avant dutiliser les couteurs stro
Rgles de scurit
le volume Prcdent Diminuer le volume
Chargement
dappariement Rpondre un appel Rejeter un appel Fin de lappel Rappel du dernier numro
4. Comment lutiliser ?
4.1 Fonction gnrale 2. Contenu de la trousse Rsultat souhait
MIC
appariement
sonore retentit)
et maintenez-le enfonc pendant 8 secondes
cellulaire dot de la fonction Bluetooth ou un autre appareil matre Bluetooth pour effectuer
Diminuer le volume
Rpondre un appel
Appariement un ordinateur :
Prcdent
de batterie faible Chargement
secondes lorsque lappareil est allum (un bip
musique lorsque lappareil est connect ou en
Fin de lappel
transfrer lappel entre le tlphone cellulaire
Rappel du dernier numro
Rejeter un appel Rinitialisation dusine
secondes pour rejeter lappel lorsque lappel
pendant 5 secondes en mode dappariement
4.2. Appariement un tlphone cellulaire ou un autre appareil
4.4 Chargement de votre appareil Lappareil se connecte facilement un chargeur secteur ou un chargeur
Lecture audio via le cble auxiliaire
Avertissement :
Vous devez charger les couteurs Bluetooth sils nont pas t utiliss pendant 5. Maintenance et assistance
Paramtre Valeur
Bluetooth
Porte RF Rponse en frquence
10 m
30mW
100dB
Dure de lecture
Dure de charge
151 X 63 X 182 mm Poids 150g REMARQUE :
www.outdoortech.com
FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:
Reorient the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into and outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. IC STATEMENT This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS) d'Innovation, Sciences et Dveloppement conomique Canada. Le fonctionnement est soumis aux deux conditions suivantes :
(1) Cet appareil ne doit pas causer d'interfrences.
(2) Cet appareil doit accepter toutes les interfrences, y compris celles susceptibles de provoquer un fonctionnement indsirable de l'appareil.