all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
CRN 23308 User Manual | Users Manual | 1.08 MiB | February 08 2002 / June 12 2002 | |||
1 2 |
|
MANUAL | Users Manual | 967.21 KiB | / June 12 2002 | |||
1 2 | Cover Letter(s) | / June 12 2002 | ||||||
1 2 | Cover Letter(s) | / June 12 2002 | ||||||
1 2 | RF Exposure Info | / June 12 2002 | ||||||
1 2 | External Photos | / June 12 2002 | ||||||
1 2 | ID Label/Location Info | / June 12 2002 | ||||||
1 2 | Internal Photos | / June 12 2002 | ||||||
1 2 | RF Exposure Info | / June 12 2002 | ||||||
1 2 | RF Exposure Info | / June 12 2002 | ||||||
1 2 | Test Setup Photos | / June 12 2002 | ||||||
1 2 | Test Report | / June 12 2002 | ||||||
1 2 | Test Report | / June 12 2002 | ||||||
1 2 | Test Report | / June 12 2002 | ||||||
1 2 | Test Report | / June 12 2002 | ||||||
1 2 | Cover Letter(s) | September 08 2002 | ||||||
1 2 | RF Exposure Info | September 08 2002 | ||||||
1 2 | RF Exposure Info | September 08 2002 | ||||||
1 2 | Test Report | September 08 2002 | ||||||
1 2 | Test Report | September 08 2002 |
1 2 | CRN 23308 User Manual | Users Manual | 1.08 MiB | February 08 2002 / June 12 2002 |
Harmony Harmony 802.11a Network Adapter User's Guide 2 From the use of the product From the loss of use, revenue or profit of the product As a result of any event, circumstance, action, or abuse beyond the control of Proxim Corporation Copyright 2002 Proxim Corporation, Sunnyvale, CA. All rights reserved. Covered by one or more of the following U.S. patents: 5,231,634; 5,875,179; 6,006,090. This users guide and the software described in it are copyrighted with all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of Proxim Corporation. Trademarks Harmony, the Harmony logo, 2X, Proxim, and the Proxim logo are trademarks of Proxim Corporation. All other trademarks are the property of their respective owners. Limited Warranty, Disclaimer, Limitation Of Liability For a period of three (3) years from the date of purchase by the retail customer, Proxim warrants the Harmony 802.11a CardBus Cards (Models 8450 and 8455) and the Harmony 802.11a PCI Card (Model 8150) against defects in materials and workmanship. Proxim will not honor this warranty if there has been any attempt to tamper with or remove the products external foil label. This warranty does not cover and Proxim will not be liable for any damage or failure caused by misuse, abuse, acts of God, accidents, or other causes beyond Proxims control, or claim by any entity other than the original purchaser. If, after inspection, Proxim determines there is a defect, Proxim will repair or replace the Harmony 802.11a network adapter at no cost to you. To return defective merchandise to Proxim, please call Proxim Technical Support at 1-408-731-2640 to obtain a Return Merchandise Authorization (RMA) number. In no event shall Proxim Corporation be responsible or liable for any damages arising:
Whether such damages be direct, indirect, consequential, special, or otherwise and whether such damages are incurred by the person to whom this warranty extends or a third party. Warranty Return Policy If you have a problem with a Harmony 802.11a CardBus Card (Model 8450 or 8455) or a Harmony 802.11a PCI Card (Model 8150), please call Proxim Technical Support at 1-408-731-2640. Proxim Technical Support will assist with resolving any technical difficulties you may have with your Proxim product. After calling Proxim Technical Support, if your product is found to be defective, you may return the product to Proxim after obtaining an RMA (Return Merchandise Authorization) number. The product must be returned in its original packaging. The RMA number should be clearly marked on the outside of the box. Proxim cannot be held responsible for any product returned without an RMA number, and no product will be accepted without an RMA number. FCC WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Harmony 802.11a Network Adapter Users Guide Part # 2050.0471 Rev. -- 8455 D6 3 The Manufacturer:
Le Constructeur:
Der Hersteller:
Address:
Addresse:
Addresse:
Declares that the Product:
Dclare que le Produit:
Erklrt, dass das Produkt:
Declaration of Conformity Dclaration de Conformit Konformittserklrung Proxim Europe B.V. Prins Bernhardplein 200 1097 JB, P.O. Box 94071, 1090 GB Amsterdam, The Netherlands Type:
Models:
Harmony 802.11a 8450 CardBus Card 8150 PCI Card meets the essential requirements according to article 3 of the following EC-Directive:
est conforme aux exigencies essentielles darticle 3 de la Directive CE:
die grundlegenden Anforderungen gem Artikel 3 der nachstehenden EU-Richtlinie erflt:
Directive 1999/5/EC of the European Parliament and of the Council of 09 March 1999 relating to Radio and Telecommunications Terminal Equipment (R&TTE), including the mutual recognition of their conformity. Directive 1999/5/EC du Parlement Europeen et du Conseil du 09 mache 1999 concernant les radio et equipments terminaux de telecommunications, incluant la reconnaissance mutuelle de leur conformite. Richtlinie 1999/5/EG des Europischen Parlaments und des Rates vom 09. Mrz 1999 ber Funkanlagen und Telekommunikationsendeinrichtungen und die gegenseitige Anerkennung ihrer Konformitt. and that the following harmonized standards have been applied:
et que les standards marmonises suivants ont ete appliqus:
und dass die folgenden harmonisierten Normen angewandt wurden:
EN301893-V1.1.1 EN301489-17 V1.1.1 / September 2000 EN60950
/ December 2000
/ January 2001 Equipment Class Identifier This Product is a Class-2 under the scope of the R&TTE. Be aware that certain countries use other frequencies or have special restrictions of use. This means that products bought elsewhere might cause problems in the above these country(ies) and should be avoided. Consult your Post Telegraph and Telephone office of your country for latest details. Amsterdam, 18 March 2002 Place and Date of the declaration Lieu et date de la declaration Ort und Datum der Konformittserklrung Name and Signature Nom et Signature Name und Unterschrift Carmelo S. Amarena International Product Manager Proxim Corporation & Proxim Europe B.V. 4 For Indoor Use Only These products are for indoor use only. Uniquement pour usage d'intrieur. Somente para uso interno. Solamente para el uso interior. Per uso al coperto solamente. Fr Innen Verwendung nur. Nemlig indendrs hjlp bare. For indoor bruk bare. Fr indoor anvndning enda. Voor overdekt toepassing uitsluitend. Indoor kytt varten vain. Product Approvals Proxim will only ship products that are type approved in the destination country. Refer to Proxims Web site at http://www.proxim.com/support/80211acertifications/ for a list of countries that have approved Proxims 802.11a products. This Web site also details any special requirements that govern the use of 802.11a products in a particular country. An 802.11a product purchased for use in one country may not necessarily comply with the RF regulations in another country. 5 Table of Contents Chapter 1 - Introduction .................................................................................. 7 The Harmony Family .......................................................................................8 The Product Package .....................................................................................9 Harmony 8455 802.11a CardBus Card .......................................................9 Harmony 8450 802.11a CardBus Card ......................................................9 Harmony 8150 802.11a PCI Card ...............................................................9 System Requirements .................................................................................. 10 Overview of Country-Specific Features ..........................................................11 Chapter 2 - Installation .................................................................................. 12 Pre-installation Considerations .................................................................... 12 Regulatory Warnings .............................................................................. 12 Windows ME and Windows 98 SE Installation CD Requirement .............. 13 Windows NT Laptops Require a Plug & Play Utility .................................. 14 Note to Customers Using a Laptop Without a CD-ROM Drive ................... 14 Installation Instructions ................................................................................15 Windows 98SE/ME/2000/XP ..................................................................15 Windows NT ........................................................................................... 18 Related Topics ....................................................................................... 21 Upgrading to Version 1.4 .............................................................................. 22 Chapter 3 - Wireless Topologies ..................................................................... 23 Ad Hoc ......................................................................................................... 23 Infrastructure ...............................................................................................24 Connecting to a Single AP ......................................................................24 Roaming Between Multiple APs .............................................................. 25 Chapter 4 - Configuration Parameters ............................................................ 27 The IEEE 802.11a Specification ..................................................................... 27 802.11a Software Parameters .......................................................................28 Network Mode .......................................................................................28 SSID ......................................................................................................28 Power Saving Mode ...............................................................................29 2X Mode ................................................................................................29 Roaming ................................................................................................29 Channel .................................................................................................30 Send Rate .............................................................................................. 31 Fragmentation ....................................................................................... 31 RTS/CTS ................................................................................................. 32 Security Options .................................................................................... 32 6 Chapter 5 - Harmony Utility ............................................................................ 36 Status Monitor Icon ..................................................................................... 36 Configuration Utility ..................................................................................... 37 Association Information ......................................................................... 37 Station Configuration ............................................................................. 39 Security .................................................................................................42 Network Traffic Statistics ........................................................................51 802.11a Networks .................................................................................. 54 Version Information ............................................................................... 57 Chapter 6 - Troubleshooting .......................................................................... 58 How to Obtain Help with Your LAN Installation ............................................. 58 Common Installation Problems .................................................................... 58 Adapter Inserted Before Running the Installation Program ..................... 58 Windows 98/ME/2000/XP Troubleshooting ...........................................60 Configuring Networking Clients and Protocols .............................................. 61 Windows XP/2000 ................................................................................. 61 Windows ME/98 SE ...............................................................................62 Windows NT ...........................................................................................62 Uninstalling a Harmony 802.11a Network Adapter ........................................ 63 Range ..........................................................................................................64 CardBus Card LED Indicators ........................................................................64 Common Technical Support Questions ........................................................ 65 Appendix A - Technical Specifications ............................................................. 68 Technical Specifications ..............................................................................68 Parameters .................................................................................................. 70 Appendix B - Technical Support and Training ................................................... 72 Index............................................................................................................ 73 7 Chapter 1 Introduction Congratulations on your purchase of a Harmony 802.11a network adapter. These products are high performance wireless LAN adapter cards that comply with the IEEE 802.11a standard. This means that they are interoperable with IEEE 802.11a equipment from any manufacturer when operating in 802.11a mode. In addition, they support 2XTM mode*, which provides data rates of up to 108 Mbps. The Harmony 802.11a CardBus Cards (Model 8450 and 8455) and the Harmony 802.11a PCI Card (Model 8150) support Windows XP, Windows 2000, Windows Millennium Edition (ME), Windows 98 Second Edition (SE), and Windows NT 4.0. Computers with a Harmony 802.11a network adapter installed look like standard network nodes to the operating system. The Harmony 802.11a network adapters can be used with other 802.11a devices to form a stand-alone wireless Ad Hoc network* or used in conjunction with a Harmony infrastructure to provide mobile clients with wireless access to an Ethernet network. Proxim is the pioneer in wireless broadband networking. Proxims unmatched expertise in radio networking technology, combined with the companys extensive experience serving the communication needs of the mobile computing user, have kept Proxim at the forefront of the wireless LAN market.
*Available features vary by region/country. Introduction 8 The Harmony Family The Harmony network adapters are members of a product family that provides a complete wireless networking solution. The Harmony Access Point Controller Model 7560 centralizes the management, security, and filtering capabilities of a wireless LAN. The Access Point (AP) Con-
troller communicates with Harmony Access Points over the Ethernet network to provide wireless network access for mobile clients. The AP Controller can support multiple APs, even if each AP complies with a different wireless standard. The Harmony Access Point is a networking bridge that operates at Layer 2 of the OSI networking model. Working in conjunction with a Harmony AP Controller, the AP forwards packets between its radio and the Ethernet network. Three models of the Harmony Access Point are available to support the IEEE 802.11a, IEEE 802.11b, or OpenAir wireless standard: the 802.11a Access Point Model 8570/8571, the 802.11b Access Point Models 8550/8551 and the OpenAir Access Point Model 7550. The optional Harmony Power System Model 7562 provides DC power to Harmony APs over the unused pins of a twisted pair Ethernet cable. The Harmony 802.11a CardBus Card is a wireless LAN adapter that fits into a 32-bit CardBus slot in a laptop computer and complies with the IEEE 802.11a standard. Two models are available: Model 8450 and Model 8455. The Harmony PC Card is a wireless LAN adapter that fits into a PCMCIA Type II slot in a laptop computer. Two models are available to support the IEEE 802.11b
(8430 Series) or OpenAir (7430 Series) wireless standard. The Harmony CompactFlash Card is a wireless LAN adapter that fits into a CompactFlash slot in a Pocket PC. Two models are available to support the IEEE 802.11b (Model 8630) or OpenAir (Model 7630) wireless standard. The Harmony PCI Card is a wireless LAN adapter that fits into a standard PCI expansion slot. Two models are available to support the IEEE 802.11a (Model 8150) or 802.11b (Model 8110) wireless standard. The Harmony OpenAir USB Adapter Model 7230 is an OpenAir-compliant wire-
less LAN adapter that connects to a Windows 98/ME/2000 computers Universal Serial Bus (USB) port. Introduction 9 The Product Package The items included with each Harmony 802.11a network adapter are listed below. If any of these items are missing or damaged, please contact your reseller or Proxim Technical Support. Harmony 8455 802.11a CardBus Card Each Harmony 802.11a CardBus Card Model 8455 comes with the following:
One 802.11a CardBus Card with two integral antennas (antennas are inside the casing and not visible to the user) One Harmony 802.11a Installation CD-ROM containing Proxim software and utilities and this users guide in Portable Document Format (PDF) One Harmony 8455 802.11a CardBus Card Quick Start Guide One warranty registration card Harmony 8450 802.11a CardBus Card Each Harmony 802.11a CardBus Card Model 8450 comes with the following:
One 802.11a CardBus Card with two integral antennas (antennas are inside the casing and not visible to the user) One Harmony 802.11a Installation CD-ROM containing Proxim software and utilities and this users guide in Portable Document Format (PDF) One Harmony 8450 802.11a CardBus Card Quick Start Guide One warranty registration card Harmony 8150 802.11a PCI Card Each Harmony 802.11a PCI Card Model 8150 comes with the following:
One 802.11a PCI Card with two integral antennas (one antenna has a longer cable than the other) One Harmony 802.11a Installation CD-ROM containing Proxim software and utilities and this users guide in Portable Document Format (PDF) One Harmony 8150 802.11a PCI Card Quick Start Guide One warranty registration card Introduction 10 System Requirements To begin using a Harmony 802.11a network adapter, you must have the following minimum requirements:
A computer that meets the following specifications:
Windows XP, Windows 2000, Windows Millennium Edition (ME), Windows 98 Second Edition (SE), or Windows NT (Service Pack 6 or later)* installed CardBus Card users: PC Card expansion slot (32-bit CardBus) PCI Card users: PCI (Peripheral Components Interconnect) expansion slot At least 64 MB of memory A 300 MHz processor or higher At least one other IEEE 802.11a-compliant device Adapters sold in Europe require an 802.11a-compliant Access Point
(peer-to-peer Ad Hoc mode is not available in Europe)
*A Windows NT laptop must have a third-party Plug-and-Play utility (such as Systemsofts CardWizard) to install the Harmony 802.11a CardBus Card. Introduction 11 Overview of Country-Specific Features This users guide provides information on how to install and use the Harmony 802.11a CardBus Card and the Harmony 802.11a PCI Card. Product features vary by region/country. The following table summarizes the product differences based on region:
U.S./Canada Europe Japan/Singapore 2X Mode Available Not available Not available Ad Hoc Mode Available Not available Available Number of Channels 8
(3 in 2X Mode) 8 4 12 Chapter 2 Installation This chapter describes how to install a Harmony 802.11a network adapter and software in a computer running Windows XP, Windows 2000, Windows Millennium Edition (ME), Windows 98 Second Edition (SE), or Windows NT 4.0 (SP 6 or later). Note:
Run the Harmony Installation program before installing the 802.11a network adapter in the computer. Pre-installation Considerations Review the following pre-installation considerations before installing a Harmony 802.11a network adapter. Regulatory Warnings FCC Guidelines 802.11a CardBus Card Users (Models 8450 and 8455):
These devices have been tested for compliance with FCC RF Exposure (SAR) limits in a typical laptop configuration. In order to comply with the SAR limit established in the ANSI C95.1 standard, it is recommended when using a PC card adapter that the integrated antenna is positioned more than 2.5 centimeters from your body or nearby persons during extended periods of operation. If the antenna is positioned less than 2.5 centimeters from the user, it is recommended that the user limit exposure time. 802.11a PCI Card Users (Model 8150):
It is the responsibility of the installer and users of the Harmony 802.11a PCI Card Model 8150 to guarantee that the antennas are operated at least 20 centimeters from any person. This is necessary to insure that the product is operated in accordance with the RF Guidelines for Human Exposure which have been adopted by the Federal Communications Commission. Installation 13 Radio Frequency Interference Requirements The Harmony 802.11a CardBus Cards, Models 8450 and 8455, and the Harmony 802.11a PCI Card, Model 8150, operate in the frequency range of 5.15 to 5.35 GHz; they are restricted to indoor use due to their operation in the 5.15 to 5.25 GHz frequency range. FCC 15.407(e) requires that these devices be used indoors in the frequency range of 5.15 to 5.25 GHz to reduce the potential or harmful interference to co-channel Mobile Satellite systems. Therefore the devices should be used indoor only for channel 36, 40, 44, and 48 and when 2X mode is enabled, channel 42 and 50. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.725 to 5.850 GHz band. These radar stations can cause interference with and/or damage the Harmony 802.11a CardBus Cards and/or Harmony 802.11a PCI Card. DECLARATION OF CONFORMITY We, Proxim Corporation, 510 DeGuigne Drive Sunnyvale, CA 94085 USA 408-731-2700 declare under our sole responsibility that the Harmony 802.11a CardBus Cards, Models 8450 and 8455, and the Harmony 802.11a PCI Card, Model 8150, comply with Part 15 of FCC Rules. Operation of either product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Industry Canada Guidelines 8150 802.11a PCI Card Users:
The Harmony 8150 802.11a PCI Card has been designed to operate with an antenna having a maximum gain of 3 dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canadas website http://www.hc-sc.gc.ca/rpb. Windows ME and Windows 98 SE Installation CD Requirement Before beginning the installation of an 802.11a network adapter, confirm that you have a Windows 98 SE or Windows ME installation CD available (depending on the computers operating system). Windows 98/ME users may be prompted to insert a Windows CD during the installation. Installation 14 You should not need a Windows CD when installing an 802.11a network adapter in a Windows XP or Windows 2000 computer. If you do not have a Windows 98/ME CD, it is possible that you already have the Windows installation files on your hard disk. These Windows installation files are known as Windows Cabinet or CAB files. The Cabinet files are commonly located in C:\WINDOWS\OPTIONS\INSTALL\ or C:\WINDOWS\OPTIONS\CABS\. Note:
Windows 98/ME users may need the Windows CD or Cabinet files to com-
plete the installation of an 802.11a network adapter. Proxim recommends that you do not proceed with the installation until you have confirmed that you have one of these Windows installation media available. Windows NT Laptops Require a Plug & Play Utility A Windows NT laptop must have a third-party Plug-and-Play utility installed in order to use the 802.11a CardBus Card. One popular Plug-and-Play utility for Windows NT 4.0 is CardWizard from SystemSoft. See http://www.systemsoft.com for details. Note to Customers Using a Laptop Without a CD-ROM Drive If you are installing the 802.11a CardBus Card in a laptop that does not have a CD-ROM drive or if your CD-ROM drive is an external device that shares a single CardBus slot with network adapter cards, you should follow the steps below prior to installing the 802.11a CardBus Card:
1. Windows 98/ME users: Confirm that the Windows cabinet (CAB) files are installed on the computer. The CAB files are typically located in C:\WINDOWS\OPTIONS\INSTALL\ or C:\WINDOWS\OPTIONS\CABS\. 2. Windows 98/ME users: If the computer does not have the CAB files installed, copy the Win98 or Win9x folder found on the Windows CD-ROM to a temporary folder on the computer. 3. 4. Copy the contents of the Harmony 802.11a Installation CD-ROM to a temporary folder on the computer. Alternatively, you may download the software from Proxims Web site at http://www.proxim.com/support/. Follow the installation instructions contained in this chapter. When the instructions call for either the Windows CD or the Harmony Installation CD, search the CAB files or the temporary folders you created in Steps #2 and 3. 5. When the installation is complete, remove the temporary folders you created in Steps #2 and 3 from the computers hard drive. Installation 15 Installation Instructions The instructions below describe how to install a Harmony 802.11a network adapter by running the Harmony Installation program before inserting the adapter into the computer. The Harmony Installation program installs the Harmony Utility first, and then it installs the Harmony 802.11a network adapter and driver. If you inserted an 802.11a adapter before running the Harmony Installation program, see Adapter Inserted Before Running the Installation Program on page 58 for instructions. Windows 98SE/ME/2000/XP Follow these steps to install a Harmony 802.11a network adapter in a Windows 98 SE, Windows ME, Windows 2000, or Windows XP computer. 1. 2. Turn on the computer and logon to Windows, if applicable. Insert the Harmony Installation CD into the computers CD-ROM drive. 3. If the Harmony Installation program does not launch automatically, run SETUP.EXE from the Harmony Installation CD to launch the program, shown in the following example. 4. 5. 6. Click Next to continue. Select a destination folder for the Harmony Utility files and click Next to continue. Enter a name for the utilitys Program Manager group and click Next. Installation 16 7. 8. Click Next to install the utility. Click Finish to view additional information about the utility. Note:
To avoid viewing the additional information, uncheck the Read Harmony configuration instructions box before clicking Finish. 9. Click Finish to complete the Harmony Utility installation and to continue the installation of a Harmony 802.11a network adapter. 10. The Harmony Device Setup wizard will prompt you to insert a Harmony 802.11a network adapter, as shown below. Harmony 802.11a CardBus Card users: Insert the CardBus Card into an available CardBus slot and proceed to Step #11. Harmony 802.11a PCI Card users: Follow these steps:
Click Cancel. Shut down the computer, unplug its power cord from the wall outlet, and remove the computer cover. Locate an unused PCI slot and refer to your PCs manual for instructions on how to remove the plate that covers the slot (if applicable). Feed the cards antennas through the PCI slot and out the back of the computer. Align the PCI Card over the empty slot and firmly insert the card into the slot. See page 58 for a sample illustration. Secure the cards metal bracket to the computer following the directions pro-
vided in your PCs manual and replace the computer cover. Installation 17 Plug the computers power cord back into the wall outlet. Attach the antenna with the longer cable to the antenna base and place it on top of your desk, computer, or monitor. Turn on the computer and proceed to Step #11. 11. Follow the on-screen instructions to install the network adapter. Note the following:
If prompted to identify the location of the file Prox11a.sys or Netpr11a.cat, direct the installation wizard to search the Harmony Installation CD. Windows XP users: If prompted, select Install the software automatically
(Recommended) and click Next. Windows 98/ME users: Insert the Windows installation CD if prompted. If you do not have a Windows installation CD, see Windows ME and Windows 98 SE Installation CD Requirement on page 13. 12. Restart the computer if prompted. Otherwise, click Close when prompted that the Harmony 802.11a network adapter has been properly configured. Note:
If the Harmony Device Setup program or Windows Networking reports that the Harmony 802.11a network adapter has not been properly configured, fol-
low the on-screen instructions and refer to Chapter 6 for troubleshooting suggestions. 13. The Harmony Utilitys Status Monitor icon will appear in Windows Taskbar, as shown below. 14. The Harmony 802.11a network adapter is now ready for use. Use the Harmony Utility (described in Chapter 5) to configure the adapter and determine if it is communicating with other 802.11a devices. Note:
PCI Card users may need to enable Harmony Configuration before using the Harmony Utility. See Note to Windows XP Users on page 41 for details. If you have one or more 802.11a Access Points, configure the Harmony 802.11a network adapters Network Mode to Infrastructure. If your network consists of only 802.11a client adapters, set Network Mode to Ad Hoc. Note:
Products sold in Europe do not support Ad Hoc mode. For more information on Ad Hoc and Infrastructure networks, see Chapter 3 beginning on page 23 and Network Mode on page 28. Installation 18 Windows NT Follow these steps to install a Harmony 802.11a network adapter in a computer running Windows NT 4.0. 1. 2. Turn on the computer and logon to Windows, if applicable. Insert the Harmony Installation CD into the computers CD-ROM drive. 3. If the Harmony Installation program does not launch automatically, run SETUP.EXE from the Harmony Installation CD to launch the program, shown in the following example. 4. 5. 6. 7. 8. Click Next to continue. Select a destination folder for the Harmony Utility files and click Next to continue. Enter a name for the utilitys Program Manager group and click Next. Click Next to install the utility. Click Finish to view additional information about the utility. Note:
To avoid viewing the additional information, uncheck the Read Harmony configuration instructions box before clicking Finish. 9. Click Finish to complete the Harmony Utility installation and to continue the installation of a Harmony 802.11a network adapter. Installation 19 10. Click Install when prompted by the Harmony Device Setup screen, shown below. Note:
Proxim recommends that you let the installation wizard install the card for you. However, if you want to install the adapter manually, click Control Panel to open the Network screens Adapter window. Click OK after you have manually installed the adapter to return to the installation wizard. 11. When the Microsoft TCP/IP Properties screen appears, select the Harmony 802.11a card from the list of network adapters and configure its IP settings (as required by your network). Installation 20 12. Click OK to save the TCP/IP settings. 13. Click No when prompted to restart the computer. 14. Click OK to close the Harmony Device Setup screen. 15. Shut down the computer. 16. Install the Harmony 802.11a network adapter in the computer. Harmony 802.11a CardBus Card users: Insert the CardBus Card into an available CardBus slot. The laptop must have a third-party Plug-and-Play utility installed. See Windows NT Laptops Require a Plug & Play Utility on page 14 for details. Harmony 802.11a PCI Card users: Follow these steps:
Unplug the computers power cord from the wall outlet, and remove its cover. Locate an unused PCI slot and refer to your PCs manual for instructions on how to remove the plate that covers the slot (if applicable). Feed the cards antennas through the PCI slot and out the back of the computer. Align the PCI Card over the empty slot and firmly insert the card into the slot. See page 58 for a sample illustration. Secure the cards metal bracket to the computer following the directions pro-
vided in your PCs manual and replace the computer cover. Plug the computers power cord back into the wall outlet. Attach the antenna with the longer cable to the antenna base and place it on top of your desk, computer, or monitor. 17. Turn on the computer. 18. The Status Monitor icon will appear in Windows Taskbar, as shown below. 19. The Harmony 802.11a network adapter is now ready for use. Use the Harmony Utility (described in Chapter 5) to configure the adapter and determine if it is communicating with other 802.11a devices. Note:
If Windows Networking reports that the Harmony 802.11a network adapter has not been properly configured, follow the on-screen instructions and refer to Chapter 6 for troubleshooting suggestions. If you have one or more 802.11a Access Points, configure the 802.11a adapters Network Mode to Infrastructure. If your network consists of only 802.11a adapters, set Network Mode to Ad Hoc. For more information on Ad Hoc and Infrastructure networks, see Chapter 3 beginning on page 23 and Network Mode on page 28. Note:
Products sold in Europe do not support Ad Hoc mode. Installation 21 Related Topics See Chapter 4 beginning on page 27 for a discussion of the 802.11a configuration parameters. Refer to Chapter 5 beginning on page 36 for information on how to use the Harmony Utility. See Configuring Networking Clients and Protocols on page 61 for information on how to configure a networking protocol like TCP/IP (so you can configure the 802.11a network adapters IP settings). Installation 22 Upgrading to Version 1.4 If you already have an earlier version of the Harmony 802.11a software installed, follow these steps to upgrade to version 1.4:
1. Insert the Harmony Installation CD into the CD-ROM drive. If you do not have a CD that contains software version 1.4, you can download the software from Proxims Web site at http://www.proxim.com. 2. Double-click SETUP.EXE to begin the software upgrade. 3. Click the Upgrade button when prompted that the Harmony 802.11a Utility is already installed on the computer, as shown below. 4. When prompted, click OK to restart the computer. After the computer reboots, the Harmony 802.11a network adapter will be using software version 1.4. 23 Chapter 3 Wireless Topologies Harmony wireless products look and operate similar to Ethernet products. The only difference is that a radio replaces the wire between various nodes. This means that all of your existing applications that operate over Ethernet will work with Harmony without any special wireless networking software. The Harmony 802.11a network adapters support several network topologies, which are described in this chapter. Ad Hoc Two or more computers easily establish an ad hoc network when the units are in range of each other. Each computer can dynamically connect and reconnect to the others with no additional configuration, using off-the-shelf peer-to-peer network operating systems, as illustrated in Figure 1. Figure 1 Ad Hoc To use a Harmony 802.11a network adapter as a member of an Ad Hoc network with other 802.11a-compatible cards, configure the adapter to operate in Ad Hoc mode. See Network Mode on page 28 for details. Note:
Products sold in Europe do not support Ad Hoc mode. Wireless Topologies 24 Infrastructure Many companies have an existing Ethernet or wired LAN infrastructure and want to be able to extend that capability to wireless nodes. This is accomplished by installing one or more Harmony 802.11a Access Points on the Ethernet network. You can also add a Harmony Access Point Controller to the network to simplify Access Point management and take advantage of additional features. See the Harmony Access Point Controller Users Guide for more information. Connecting to a Single AP Figure 2 depicts a Harmony network that uses a single Access Point (AP) with a Harmony Access Point Controller. Figure 2 Single AP Wireless Topologies 25 Roaming Between Multiple APs For larger environments, Harmony 802.11a client devices may roam from one Harmony 802.11a Access Point to another while maintaining the same network connection. The 802.11a Access Points establish coverage areas or cells similar in concept to those of a cellular phone network. The mobile clients will connect to any 802.11a Access Point that is within range. Figure 3 Roaming Each Harmony 802.11a Access Point within a roaming network must have a unique, independent Channel, but all must have the same SSID and security settings (if applicable). Mobile clients equipped with a Harmony 802.11a network adapter are configured to operate in Infrastructure mode and have the same SSID and security settings as the Access Points. Alternatively, the mobile client may use an SSID of any to associate with any available Access Point, regardless of the Access Points SSID. Wireless Topologies 26 As the mobile client seamlessly switches from cell to cell, its network connectivity is preserved. The user can move freely between the Harmony 802.11a Access Points in the network. When the roaming client leaves the transmission range of one 802.11a Access Point, the software automatically polls the other 802.11a Access Point(s) in the same Extended Service Set (ESS) to continue the network connection. Note:
The Access Points cells must overlap to ensure that there are no gaps in cov-
erage so that the roaming client will always have a connection available. See Figure 3 for an example of a roaming Infrastructure network. In addition, if your network has a Harmony Access Point Controllers, you can install Harmony 802.11a Access Points on different IP subnets from the AP Controller, allowing mobile users to roam across routers. For more information on the Harmony AP Controller and Access Points, refer to the Harmony Access Point Controller Users Guide. Guidelines for Roaming A Harmony 802.11a client can only roam between Harmony 802.11a Access Points. An 802.11a client cannot communicate with Harmony 802.11b or OpenAir Access Points. All Harmony 802.11a Access Points must have the same SSID. All workstations with Harmony 802.11a client adapters installed must use either an SSID of any or the same SSID as the Access Points that they will roam between. All 802.11a Access Points and clients must have the same security settings to communicate. The Access Points cells must overlap to ensure that there are no gaps in coverage and to ensure that the roaming client will always have a connection available. Access Points in the same vicinity should each use a unique, independent Chan-
nel to avoid potential interference. Access Points that use the same Channel should be installed as far away from each other as possible to reduce potential interference. 27 Chapter 4 Configuration Parameters This chapter provides information on the 802.11a wireless standard and describes the Harmony 802.11a configuration parameters. The IEEE 802.11a Specification In 1997, the Institute of Electrical and Electronics Engineers (IEEE) adopted the 802.11 standard for wireless devices operating in the 2.4 GHz frequency band. This standard includes provisions for three radio technologies: direct sequence spread spectrum, frequency hopping spread spectrum, and infrared. Devices that comply with the 802.11 standard operate at a data rate of either 1 or 2 Mbps. In 1999, the IEEE modified the 802.11 standard to support devices operating in the 5 GHz frequency band, calling this new standard 802.11a. 802.11a devices are not backwards compatible with 2.4 GHz 802.11 or 802.11b devices. 802.11a radios use a radio technology called Orthogonal Frequency Division Multiplexing (OFDM) to achieve data rates of up to 54 Mbps. In addition, the Harmony 802.11a network adapters support 2XTM Mode. This mode is not part of the IEEE 802.11a specification but it allows data rates of up to 108 Mbps. See 2X Mode on page 29 for details. 2X Mode is not available in all countries. Configuration Parameters 28 802.11a Software Parameters The following configuration parameters are available for a Harmony 802.11a network adapter. Refer to Chapter 5 for instructions on how to change these configuration settings using the Harmony Utility. Network Mode Network Mode configures a Harmony 802.11a network adapter to operate in either Ad Hoc mode or Infrastructure mode. When set to Ad Hoc, all Harmony 802.11a devices must have the same SSID, Channel, and WEP Keys (if WEP is enabled) to communicate. An Ad Hoc network is a wireless network that consists of only 802.11a client adapters (i.e., a network that does not have an Access Point). Note:
When set to Infrastructure mode, an 802.11a network adapter must have the same SSID and security settings as the Access Points on the network to communicate. An Infrastructure network is any network that includes one or more 802.11a Access Points. By default, the adapter operates in Infrastructure mode. Products sold in Europe do not support Ad Hoc mode. SSID The SSID (Service Set ID), which is also referred to as the ESSID (Extended Service Set ID), is a text string that all members of the same 802.11a network share. The SSID may be up to 32 alphanumeric characters long, including spaces. Also, when configured to any, a Harmony 802.11a network adapter can communicate with any available Access Point regardless of the Access Points SSID. In an Infrastructure network, the SSID must match on all Harmony 802.11a Access Points and 802.11a clients (unless a clients SSID is any). Devices that do not share the same SSID cannot communicate. In an Ad Hoc network without an Access Point, each 802.11a device must have the same SSID to participate in the network. A node cannot use the any SSID to join an Ad Hoc network. By default, an 802.11a adapters SSID is set to any. Configuration Parameters 29 Power Saving Mode The Harmony 802.11a network adapters support optional power management to conserve battery life. Power Saving Mode is only available if the adapter is operating in Infrastructure mode. When Power Saving Mode is set to Normal or Maximum, a Harmony 802.11a network adapter enters a doze mode where the card becomes inactive and only wakes up periodically to receive control messages from the Access Point. The card wakes up more often in Normal mode than in Maximum mode so a card in Normal mode will respond sooner to network requests than a node in Maximum mode. However, Maximum mode draws less power than Normal mode. When an Access Point receives a packet destined for a dozing client, it buffers the packet and includes a notification within its control message to alert the client that a packet is waiting for it. Once the card receives the control message, it polls the Access Point to request that the buffered packet be sent to it. Products sold in Europe, Japan, and Singapore do not support 2X mode. 2X Mode The Harmony 802.11a network adapters support 2XTM mode, a high-speed operating mode that can provide data rates of up to 108 Mbps, twice the speed of standard 802.11a devices. By default, 2X mode is disabled. Note:
When 2X mode is disabled, a Harmony 802.11a adapter complies with the IEEE 802.11a standard, can operate on one of eight Channels, and can achieve speeds of up to 54 Mbps. When 2X mode is enabled, a Harmony 802.11a adapter does not comply with the IEEE 802.11a standard, can operate on one of three Channels, and can achieve speeds of up to 108 Mbps. Note:
You must configure all devices in the same network to use 2X mode. A device in 2X mode cannot communicate with a device in 802.11a mode. Roaming The Roaming parameter allows you to determine how tolerant a Harmony 802.11a adapter is to radio phenomena that can cause the unit to roam from one Access Point to another in order to maintain a strong wireless connection. In areas with many 802.11a Access Points that provide heavy overlapping coverage, set this parameter to Fast to maintain high throughput for each wireless adapter. In most networks, set Roaming to Normal. Wireless adapter throughput will not change noticeably, and an overabundance of Access Points is not required. If the coverage area provided by 802.11a Access Points is sparse, set Roaming to Slow. Harmony adapters will not roam until they are nearly out of range of the Access Point with which they are associated. Configuration Parameters 30 Channel 802.11a devices spread a radio signal over a range of frequencies. The IEEE 802.11a specification allocates the available frequencies in the 5 GHz band into a series of operating Channels that are identified by a Channel number and a center carrier frequency. An 802.11a network adapter configured for Infrastructure mode receives a Channel assignment from its Access Point. You cannot configure the Channel for an adapter operating in Infrastructure mode. For an Ad Hoc network, all nodes must use the same Channel to communicate. You can configure the adapter to scan multiple Channels to locate an Ad Hoc network or you can configure it to use a specific Channel. See Station Configuration on page 39 for details. The number of available Channels varies by region and model number. For United States and Canada:
All 802.11a network adapter models can use one of eight Channels in 802.11a-compliant mode: Channel 36 (5.18 GHz), Channel 40 (5.20 GHz), Channel 44
(5.22 GHz), Channel 48 (5.24 GHz), Channel 52 (5.26 GHz), Channel 56 (5.28 GHz), Channel 60 (5.30 GHz), and Channel 64 (5.32 GHz). In addition, the Model 8455 CardBus Card supports five Channels in the 5.725-5.850 GHz band in 802.11a-compliant mode: Channel 149 (5.745 GHz), Channel 153
(5.765 GHz), Channel 157 (5.785 GHz), Channel 161 (5.805 GHz), and Channel 165
(5.825 GHz). All 802.11a network adapter models can use one of three Channels in 2X mode:
Channel 42 (5.21 GHz), Channel 50 (5.25 GHz), and Channel 58 (5.29 GHz). The Model 8455 CardBus Card also supports two additional Channels in 2X mode: Channel 152
(5.760 GHz) and Channel 160 (5.800 GHz). If you wish to install multiple Ad Hoc networks in the same vicinity, configure each network with a unique Channel to avoid interference between networks. Keep in mind that each Channel in 2X mode overlaps multiple Channels in 802.11a mode. For example, if an Ad Hoc network in 2X mode is using Channel 50, do not configure nearby networks in 802.11a mode for Channel 42, 48, 52, or 56. Note:
See Radio Frequency Interference Requirements on page 13 for important regulatory information concerning Channel selection. For Europe:
All 802.11a network adapter models can use one of eight Channels: Channel 36
(5.18 GHz), Channel 40 (5.20 GHz), Channel 44 (5.22 GHz), Channel 48 (5.24 GHz), Channel 52 (5.26 GHz), Channel 56 (5.28 GHz), Channel 60 (5.30 GHz), and Channel 64 (5.32 GHz). In addition, the Model 8455 CardBus Card supports eleven Channels in the 5.470-5.725 GHz band: Channel 100 (5.500 GHz), Channel 104 (5.520 GHz), Channel 108 (5.540 GHz), Channel 112 (5.560 GHz), Channel 116 (5.580 GHz), Channel 120 (5.600 GHz), Channel 124 (5.620 GHz), Channel 128 (5.640 GHz), Channel 132 (5.660 GHz), Channel 136 (5.680 GHz), and Channel 140 (5.700 GHz). Configuration Parameters 31 For Japan:
All 802.11a network adapter models can use one of four Channels: Channel 34 (5.17 GHz), Channel 38 (5.19 GHz), Channel 42 (5.21 GHz), or Channel 46 (5.23 GHz). If you wish to install multiple Ad Hoc networks in the same vicinity, Proxim recommends that you configure each network with a unique Channel to avoid interference between networks. For Singapore:
All 802.11a network adapter models can use one of four Channels: Channel 36 (5.18 GHz), Channel 40 (5.20 GHz), Channel 44 (5.22 GHz), or Channel 48 (5.24 GHz). Send Rate The IEEE 802.11a specification supports eight data rates: 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, and 6 Mbps. Harmonys 2X mode supports eight data rates: 108 Mbps, 96 Mbps, 72 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, and 12 Mbps. As a mobile client travels away from an 802.11a Access Point (when in Infrastructure mode) or from other 802.11a nodes (when in Ad Hoc mode), the data rate automatically decreases in order to maintain a usable radio connection. For example, in an Infrastructure network that is using 2X mode, a client that is close to an Access Point may operate at 108 Mbps, but a client that is far away from the Access Point may operate at 12 Mbps. By default, a Harmony 802.11a network adapter automatically adjusts the transmit rate depending on the mode of operation (802.11a-compliant or 2X). However, you can also manually configure a specific send rate that an adapter will use. For example, if you configure the Send Rate to 36 Mbps, a Harmony 802.11a adapter will operate at 36 Mbps. Fragmentation The Harmony 802.11a network adapters support an optional feature called Fragmentation. In harsh radio environments, 802.11a devices may have difficulty transmitting large packets that exceed a certain size. However, when Fragmentation is enabled, an 802.11a device can break up large packets into a number of smaller packets (called fragments) that can be successfully transmitted to another 802.11a device. The receiving 802.11a device then reassembles the original packet once it has received all of the fragments. You can configure a Harmony 802.11a network adapter to never use Fragmentation or to fragment only those packets that exceed a certain size. For example, if the Fragmentation Threshold is set to 1000 Bytes, then a sending radio will fragment any packet 1000 Bytes or larger before transmitting. Configuration Parameters 32 The Fragmentation Threshold supports a range between 256 and 2345 Bytes. If set to 256, then a sending radio will fragment all packets 256 Bytes or larger. If set to 2345, then a sending radio will fragment only those radio packets that are 2345 Bytes or larger. By default, Fragmentation is disabled. RTS/CTS The 802.11a standard supports optional RTS/CTS communication based on packet size. By default, RTS/CTS communication is disabled. Without RTS/CTS, a sending radio listens to see if another radio is already using the medium before transmitting a data packet. If the medium is free, the sending radio transmits its packets. However, there is no guarantee that another radio is not transmitting a packet at the same time, causing a collision. When RTS/CTS occurs, the sending radio first transmits a Request to Send (RTS) packet to confirm that the medium is clear. When the receiving radio successfully receives the RTS packet, it transmits back a Clear to Send (CTS) packet to the sending radio. When the sending radio receives the CTS packet, it sends the data packet to the receiving radio. The RTS and CTS packets contain a reservation time to notify other radios that the medium is in use for a specified period. This helps to minimize collisions. While RTS/CTS adds overhead to the radio network, it is particularly useful for large packets that take longer to resend after a collision occurs. You may configure a Harmony 802.11a network adapter to never use RTS/CTS (i.e., disable RTS/CTS) or to use RTS/CTS for packets over a certain size. For example, if the RTS/CTS Threshold is set to 1000 Bytes, then a sending radio will use RTS/CTS before transmitting any packet 1000 Bytes or larger. The RTS/CTS Threshold parameter supports a range between 1 and 2345 Bytes. When set to 1, a sending radio will use RTS/CTS before transmitting any packet. Security Options The Harmony 802.11a adapters offer four security options: No Security, Use WEP for Authentication and Encryption, Use the Harmony Security Protocol, and 802.1x. WEP Encryption and Authentication The IEEE 802.11a standard specifies an optional encryption feature, known as Wired Equivalent Privacy or WEP, that is designed to provide a wireless LAN with a security level equal to what is found on a wired Ethernet network. WEP encrypts the data portion of each packet exchanged on the 802.11a network using a 64-bit, 128-bit, or 152-bit encryption key (also known as a WEP Key). In addition, Harmony 802.11a devices use WEP with Shared Key Authentication to prevent unauthorized devices from associating with an 802.11a network. Configuration Parameters 33 When WEP is enabled, two 802.11a devices must have the same WEP Keys and both devices must be configured to support WEP in order to communicate. If one device is configured to use WEP for Authentication and Encryption but a second device is not, then the two devices will not communicate, even if both devices have the same WEP Keys. WEP Keys An 802.11a device with WEP enabled uses a WEP Key to encrypt and decrypt information. A user must manually enter the networks WEP Keys on each 802.11a device. If the WEP Keys do not match on two radios, no data communication will take place between these devices. A Harmony 802.11a network adapter can support up to four WEP Keys (all four Keys must have the same Key Size). A Harmony 802.11a adapter can decrypt information that was encrypted with any of its four WEP Keys, but it will only use the Default Key to encrypt outgoing information. For 64-bit encryption, a WEP Key is 10 hexadecimal digits (0-9 and A-F); for 128-bit encryption, a WEP Key is 26 hexadecimal digits (0-9 and A-F); and for 152-bit encryption, a WEP Key is 32 hexadecimal digits (0-9 and A-F). Note:
When WEP is enabled, Proxim recommends that you configure all 802.11a devices in the Extended Service Set with the same WEP Keys in the same order (but the devices do not need to use the same default Key). Harmony Security Protocol The Harmony Security Protocol automates encryption management, assigning a unique and dynamic WEP Key to each user. The Harmony Security Protocol includes the following features:
Uses 152-Bit WEP Encryption Generates a unique WEP Key for each user that is valid only for the current net-
work session Periodically renews the users Harmony session and assigns a new WEP Key without requiring any end user interaction Incorporates the end users logon prompt into Microsoft Windows standard logon procedure on the client device Each Harmony device plays a role in the Harmony Security Protocol: the AP Controllers maintain a database of user name and passwords to authenticate users; the Access Points block all network traffic to or from a client until after the user has been successfully authenticated by the Harmony System; and the Harmony client adapters include a software utility that incorporates the Harmony logon prompt into the standard Windows logon procedure. When the Harmony Security Protocol is enabled on a client adapter, the user is prompted to enter his or her Harmony User Name and Password during boot up, either immediately before or after the Windows logon prompt (depending on the device configuration). Configuration Parameters 34 Once the user has been authenticated by the Harmony System, the 802.11a adapter receives a unique 152-bit WEP Key from the Harmony System, and it can begin to exchange data with the Ethernet network. Refer to the Harmony Access Point Controller Users Guide for more information on the Harmony Security Protocol. Harmony Security Protocol Guidelines If you want to use the Harmony Security Protocol on your network, you must enable the protocol on all of your networks Harmony 802.11a Access Points and Harmony 802.11a clients. At this time, the Harmony Security Protocols client application supports Windows 98 SE, Windows ME, Windows 2000 Professional, and Windows XP. The protocol does not support Windows 2000 Server or Windows NT 4.0. The Harmony Security Protocol is only available for clients that are operating in Infrastructure mode. A network administrator who manages the networks Harmony Access Point Con-
troller(s) must assign each user a Harmony User Name and Password and enter this information into the Harmony Systems User Database. Refer to the Harmony Access Point Controller Users Guide for details. If you enable the Harmony Security Protocol, you do not need to configure WEP Keys on an 802.11a client (the Harmony System will generate keys for you). 802.1x 802.1x is an IEEE security standard for authenticating users on local area networks based on the Extensible Authentication Protocol (EAP). For more information on this standard, refer to the IEEE Web site at http://www.ieee.org/. On a wireless LAN with 802.1x enabled, an Access Point will block all traffic from a wireless client until after the user has been authenticated by the networks RADIUS
(Remote Authentication Dial-In User Service) server. Proxim supports the following RADIUS servers for use with Harmony 802.11a products:
Microsoft Windows 2000 Internet Authentication Service (IAS) Server Funk Odyssey Server Note:
You may also need to install additional components based upon the servers requirements and EAP authentication type. For example, EAP-TLS requires a Certificate Authority (CA) and that digital certificates be installed on the RADIUS server and each wireless device. Configuration Parameters 35 EAP is a flexible protocol which does not specify an authentication type. The available authentication types will vary based upon your RADIUS server and your client software; many offer advanced features such as mutual authentication between client and server and data encryption. For data encryption, a RADIUS server generates a unique WEP Key for each user following authentication. This WEP Key is used to encrypt unicast packets between the Access Point and wireless client. To encrypt broadcast packets, the Access Point and its clients use the APs configured Global WEP Keys. The Harmony Utility does not include configuration settings for 802.1x. To enable 802.1x support and configure 802.1x settings (like EAP authentication type), you need to use a client utility provided by a RADIUS server manufacturer, like Microsoft or Funk Software. Refer to Microsofts (http://www.microsoft.com/) and Funk Softwares
(http://www.funk.com/) Web sites or the documentation that came with your 802.1x solution for details. Also, see 802.1x on page 49 for additional configuration information. 36 Chapter 5 Harmony Utility Proxim provides a software utility that simplifies the management and configuration of a Harmony 802.11a network adapter. Chapter 2 describes how to install the utility. This chapter describes how to use the Harmony Utility after it has been installed. Status Monitor Icon After you have installed the utility, the Status Monitor icon will appear in Windows Taskbar. If the adapter cannot locate an Access Point (AP) or Ad Hoc network (either because the 802.11a settings do not match or the other devices are out of range), the icon will appear as follows:
When the adapter is associated with an AP or has joined an Ad Hoc network, the icon will appear as follows:
When connected to an 802.11a network, you can view additional information about the adapters status when the mouse cursor is placed over it, as shown below. If the adapter has the Harmony Security Protocol enabled and it is has not been authenticated by the Harmony System, the icon will appear as follows:
Harmony Utility 37 Right-click the icon to view configuration options for the Status Monitor:
Select Run 802.11a Configuration Utility from the drop-down menu to launch the 802.11a Configuration Utility. Double-clicking the icon also launches the utility. Select Disable Device Radio to turn off the adapters radio. You should disable the radio if you intend to use an 802.11a-equipped laptop on an airplane. A check mark appears next to this option when the radio is disabled. Select this option again to enable a disabled radio. Select Remove Status Monitor From Task Bar to close the Status Monitor. Configuration Utility The Harmony Utility includes several tools for diagnostic and configuration purposes. Each of the utilitys screens is described below. For additional information about the Harmony Utility, click Help on any screen to view on-line Help documentation. Association Information The Association Information screen, shown in the example on the next page, displays information about the adapters connection with the 802.11a network. The Association Information screen reports the following statistics:
Association State: This field reports if the adapter is communicating with an Access Point (AP) or Ad Hoc network. When communicating with an AP, this field reports ASSOCIATED AP and displays the APs physical address. When commu-
nicating with an Ad Hoc network, this field displays JOINED AD HOC MODE. If no AP or Ad Hoc network is found, this field displays NOT JOINED. Station Address: This field displays the adapters physical address (also known as MAC address). This address is configured at the factory. Channel (Freq): This field displays the current Channel and center frequency that the adapter is using. See Channel on page 30 for details. Harmony Security: Reports the status of the Harmony Security Protocol: Dis-
abled, Enabled, Not Authenticated, User Not Logged In, User Associ-
ated, and User is using Unique Encryption Key (with time of login). The Harmony Security Protocol only supports Infrastructure mode; if a client is in Ad Hoc mode, this field reports: Harmony Security does not support Ad Hoc Mode. This field is not visible on computers running Windows NT or Windows 2000 Server. Harmony Utility 38 Send Signal Strength: The Signal bar displays the signal strength for the last acknowledgment (ACK) received by the adapter. Signal strength is reported in decibels (dB). The color-coded chart below the Signal bar indicates the relative strength of the signal: a signal in the red or orange section indicates a weak con-
nection; a signal in the yellow or light green section indicates a good connection;
a signal in the darker green section indicates an excellent connection. Instantaneous Packets/Sec Sent: This statistic displays the current rate at which the adapter is transmitting packets to another 802.11a device. This information is represented as the number of packets sent per second by the adapter and is plotted on the graph located below the Packets/sec field. Note that this statistic will remain zero unless the adapter is transmitting data to another device. Average Packets/Sec Sent: This statistic displays the average number of packets transmitted by the adapter each second since the utility was launched. Harmony Utility 39 Receive Signal Strength: The Signal bar displays the signal strength for the last packet received by the adapter. Signal strength is reported in decibels (dB). The color-coded chart below the Signal bar indicates the relative strength of the sig-
nal: a signal in the red or orange section indicates a weak connection; a signal in the yellow or light green section indicates a good connection; a signal in the darker green section indicates an excellent connection. Instantaneous Packets/Sec Received: This statistic displays the current rate at which the adapter is receiving packets from another 802.11a device. This infor-
mation is represented as the number of packets received per second and is plot-
ted on the graph located below the Packets/sec field. Note that this statistic will remain zero unless the adapter is receiving data from another device. Average Packets/Sec Received: This statistic displays the average number of packets received by the adapter each second since the utility was launched. Station Configuration Click the Configuration tab to view the Station Configuration screen, shown below. Harmony Utility 40 Edit the configuration parameters as necessary and click Apply to save your changes. To change the operating Channel, Send Rate, RTS/CTS, and Fragmentation settings, click the button labeled Advanced Configuration to display these parameters. The configuration parameters are described in Chapter 4 beginning on page 27; some options may not be available in all countries (see Overview of Country-Specific Features on page 11 for details). Note that the Channel selection box is unavailable when the Network Mode is set to Infrastructure. When Network Mode is set to Ad Hoc, you can configure one or more Channels for the adapter to scan. If you select multiple Channels, the adapter will scan each Channel looking for an Ad Hoc network to join that uses the same SSID as the adapter. Harmony Utility 41 Note to Windows XP Users Windows XP provides built-in support for wireless networks. Windows XPs wireless network management features are used in lieu of the Harmony Utility. For PCI Card users, support for the Harmony Utility is disabled by default (i.e., Windows XP wireless settings are enabled); for CardBus Card users, support for the Harmony Utility is enabled by default (i.e., Windows XP wireless settings are disabled). To turn Harmony Configuration on or off, check or uncheck the box labeled Enabled Harmony Configuration (Disable Windows XP Settings) within the Station Configuration screen. When this option is disabled, the Station Configuration parameters, the Security parameters, and the 802.11a Network screens Transmission Test and Associate features are unavailable within the Harmony Utility (as shown in the example below). Harmony Utility 42 Security Click the Security tab to configure the adapters security settings. From within this screen, you can enable WEP for Authentication and Encryption, enable the Harmony Security Protocol, and configure the adapters WEP Keys. See Security Options on page 32 for more information on these settings. WEP for Authentication and Encryption Follow these steps to enable WEP for Authentication and Encryption:
1. Select Use WEP for Authentication and Encryption from the Security Level box, shown below. 2. 3. Click Configure WEP Keys. Select a Key Size from the drop-down menu (64 Bit, 128 Bit, or 152 Bit). Harmony Utility 43 4. Enter one to four WEP Keys in the fields provided, as shown in the following example. 5. Use only hexadecimal digits (i.e., 0-9 and A-F). For 64-bit encryption, enter 10 digits for each Key; for 128-bit encryption, enter 26 digits for each Key; for 152-bit encryption, enter 32 digits for each Key. Note:
If you created a text file that contains the WEP Keys, click Read Keys to upload those Keys to the adapter. See Read Key File Format on page 44 for formatting information. 6. 7. Click OK to save the WEP Keys. Select one of the Keys you configured as the Default Key. Harmony Utility 44 In the following example, Key 3 is the Default Key. A Harmony 802.11a network adapter can decrypt information that was encrypted with any of its four WEP Keys but it will only use the Default Key to encrypt outgoing information. Click Apply or OK to save the new WEP settings. If you need to change a WEP Key at a later date, click Configure WEP Keys and enter one to four new WEP Keys. Note that any Keys you entered previously will not be visible (stars appear in place of the digits). 8. 9. Read Key File Format If you have multiple clients to configure, you can avoid having to enter each WEP Key manually by creating a text file that contains the Keys. Once you have the text file, you can upload the Keys to a client by clicking the Read Keys button found on the WEP Keys Configuration screen. Harmony Utility 45 To create the text file, use a text program such as Microsoft Notepad or WordPad. The text file should have a .txt extension. The first line of the text file must read
[WEP_KEY_VALUE]. Then, enter one to four Keys in the following format:
key#=<key value>, where # indicates the Key number (1-4) and <key value> is the specified Keys hexadecimal digits. Each Key must be contain hexadecimal digits only (0-9 and A-F), and you must use the same number of digits for each Key. The number of digits depends upon the Key Size you select in the WEP Keys Configuration screen:
For 64 Bit, use 10 digits per Key. For 128 Bit, use 26 digits per Key. For 152 Bit, use 32 digits per Key. The following example illustrates the WEP Key file format for 64-bit encryption:
[WEP_KEY_VALUE]
key1=1234567890 key2=0987654321 key3=ABCDEF1234 key4=ABCDEFABCD Harmony Security Protocol Follow these steps to enable the Harmony Security Protocol:
Note:
The Harmony Security Protocol is not available on computers running Windows 2000 Server or Windows NT. 1. 2. Select Use Harmony Security Protocol within the Security Level box. Place a check mark in the Log on to Harmony Security before Windows Logon box if you want to connect to the wireless network before logging on to the Windows operating system. Note:
You should enable the Log on to Harmony Security before Windows Logon option if your computer connects to a Windows Domain Controller, connects to a Novell network, automatically reconnects to shared network drives dur-
ing Windows logon, or runs networking software (e.g., PC Anywhere) before connecting to the network. Harmony Utility 46 3. 4. 5. 6. Click Apply or OK to save the new security settings. Log off Windows or restart the computer. Log on to Windows when prompted (if the Log on to Harmony Security before Windows Logon option is disabled). The Harmony logon prompt will appear. Enter your Harmony User Name and Password in the fields provided. Harmony Utility 47 The Windows 98/ME logon prompt is shown below. Note:
The Harmony logon prompt will not appear if your Windows User Name and Password match your Harmony User Name and Password, you are within range of a properly configured Access Point, and the Log on to Harmony Security before Windows Logon option is disabled. 7. If you are not in range of a Harmony Access Point, place a check mark in the box labeled Defer logon for current session if Access Point is out of range. The Harmony software will store your User Name and Password and automatically initiate the logon procedure without any user intervention once the 802.11a network adapter has associated with an Access Point. Harmony Utility 48 8. If desired, click Change Password (Windows XP/2000 Professional) or Options...
(Windows 98/ME) to modify your Harmony user account. The Windows 98/ME logon prompt is shown below. Enter a new password twice in the fields provided to change your Harmony Password. The Password can be up to 32 characters and is case sensitive. To reset your Harmony Password to match your Windows Password, check the box labeled Synchronize Password with Windows Logon. 9. Click Logon to log on to the Harmony System. 10. Log on to Windows when prompted (if the Log on to Harmony Security before Windows Logon option is enabled). Note:
See Common Technical Support Questions on page 65 for troubleshooting suggestions if you have difficulty logging onto the network. Harmony Utility 49 802.1x The Harmony Utility does not include configuration settings for 802.1x. To enable 802.1x support, you need to use a client utility provided by a RADIUS server manufacturer, such as Microsoft or Funk Software. Note:
Confirm that the Harmony Utilitys Security Level is set to No Security before enabling 802.1x support using a third-party client utility. As of the release of this users guide, Microsoft provides 802.1x support for Windows XP users only as part of the operating system. To enable 802.1x on a Windows XP computer, you need to disable the Harmony Configuration options. Follow these steps to enable 802.1x on a Windows XP computer:
1. Open the Harmony Utility. 2. Click the Configuration tab. 3. 4. 5. Remove the check mark from the box labeled Enabled Harmony Configuration
(Disable Windows XP Settings). This will disable the Harmony Configuration options. Click OK to save this change and close the Harmony Utility. Click the networking icon in the Windows Taskbar to open Windows XPs built-in wireless network utility. WinXP Networking Icon 6. Click Properties (if associated with an AP) or Advanced (if not associated). Harmony Utility 50 7. Click the Authentication tab. 8. Configure the 802.1x settings. Contact your network administrator or refer to Windows XPs on-line Help if you need assistance configuring these settings. Note:
Depending on the networks EAP authentication type, your network adminis-
trator may need to provide you with a smart card or install a digital certificate on your computer. 9. Click the Wireless Networks tab. 10. Access the Wireless Network Properties for your network. If your network is listed in Available networks, highlight it and click Configure. If your network is listed in Preferred networks, highlight it and click Properties. If your network is not listed, click Add and enter the networks SSID. 11. Configure the networks WEP settings. Note:
If your EAP type supports dynamic WEP keys, place a check mark next to the Data encryption (WEP enabled) and The key is provided for me automati-
cally options. 12. Click OK twice to exit the networks properties window. Harmony Utility 51 Network Traffic Statistics Click the Statistics tab to view information about the number of packets sent and received by the adapter, as shown below. The default Statistics screen displays the following statistics:
Unicast Packets Sent:::: This statistic reports the number of packets transmitted by the adapter that were destined for a single network node. Multicast Packets Sent: This statistic reports the number of packets transmitted by the adapter that were destined for more than one network node. Unicast Packets Received: This statistic reports the number of packets received that were destined only for this adapter. Multicast Packets Received:::: This statistic reports the number of packets received that were destined for more than one network node. You can view additional statistics by clicking Advanced Statistics, as shown on the next page. Harmony Utility 52 The advanced Statistics screen displays the following additional statistics:
Send Send Rate: This field reports the adapters current transmit rate. Unicast Bytes Sent: This statistic reports the total number of bytes contained in the unicast packets transmitted by the adapter. Multicast Bytes Sent: This statistic reports the total number of bytes contained in the multicast packets transmitted by the adapter. Single Retries: After the adapter sends a packet, it waits for an acknowledgment from the receiving radio to confirm that the packet was successfully received. If an acknowledgment is not received within a fixed period of time, the adapter will retransmit the packet. This statistic reports the number of packets that required one retry before the adapter received an acknowledgment. Multiple Retries: This statistic reports the number of packets that required more than one retry before the adapter received an acknowledgment. Excessive Retries: This statistic reports the number of packets that were not suc-
cessfully transmitted because the adapter did not receive an acknowledgment within the maximum number of retries. Harmony Utility 53 Last ACK RSSI: This statistic reports the RSSI (Received Signal Strength) for the last acknowledgment (ACK) received by the adapter. RSSI is reported in decibels
(dB) and typically ranges from 0 to 75. In general, an RSSI less than 15 indicates a weak signal and an RSSI greater than 30 indicates a strong signal. ACK Errors: This statistic reports the number of unicast transmit attempts for which no acknowledgement (ACK) was received. CTS Errors: This statistic reports the number of Clear To Send (CTS) errors. When the adapter uses RTS/CTS before transmitting a packet, it first sends a Request to Send (RTS) message to the packets recipient. The packets recipient then returns a CTS message to the adapter. When the adapter receives the CTS, it sends the packet to the recipient. However, if the adapter does not receive a CTS within a fixed period of time, it will resend the RTS. After a fixed number of retries, the adapter will record a CTS Error if a CTS has not been received. Antenna A Success: The adapter provides antenna diversity. This means that it automatically switches between its two antennas (referred to as Antenna A and Antenna B) to provide the strongest possible signal to a receiving radio. This sta-
tistic reports the number of packets successfully transmitted using Antenna A. Antenna B Success: This statistic reports the number of packets successfully transmitted using Antenna B. Receive Receive Rate: This field reports the data rate at which the adapter is currently receiving packets sent by another 802.11a device. Unicast Bytes Received: This statistic reports the total number of bytes contained in the unicast packets received by the adapter. Multicast Bytes Received: This statistic reports the total number of bytes con-
tained in the multicast packets received by the adapter. WEP Undecryptable: This statistic displays the number of packets that were dis-
carded due to a problem during decryption, such as mismatched WEP Keys. Bad Frame Checksum: This statistic displays the number of received packets that failed the CRC (Cyclic Redundancy Check) of the Frame Check Sequence (FCS). Last Frames RSSI: This statistic reports the RSSI (Received Signal Strength) for the last packet received by the adapter. RSSI is reported in decibels (dB) and typ-
ically ranges from 0 to 75. In general, an RSSI less than 15 indicates a weak signal and an RSSI greater than 30 indicates a strong signal. Duplicate Frames: This statistic displays the number of duplicate packets received by the adapter. When the adapter successfully receives a packet, it sends an acknowledgment (ACK) to the transmitting node. If the ACK does not reach the transmitting node within a specified period of time after it sent the packet (due to interference or some other type of delay), it will resend the packet to the recipient. In this case, the adapter then receives the packet a second time, records that it received a duplicate packet, and sends an ACK again. Harmony Utility 54 802.11a Networks Click the 802.11a Networks tab to view the list of Access Points or Ad Hoc stations within range of the adapter. In the example below, the utility detected one Access Point and one Ad Hoc node. To display only Access Points, uncheck the Display Ad Hoc stations box. Note:
The 802.11a Networks screen reports the following information for each Access Point or Ad Hoc node detected by the adapter:
BSSID: This field reports the physical (or MAC) address of the detected Access Point or the Basic Service Set ID of the detected Ad Hoc node. SSID: This field reports the detected devices SSID or Service Set Identifier. See SSID on page 28 for more information. Channel: This field displays the Channel used by the detected device. See Channel on page 30 for more information. Signal Strength: This field displays the strength of the radio signal received from the detected 802.11a device. Harmony Utility 55 If you want the adapter to associate with one of the detected Access Points or join the same Ad Hoc network as one of the detected Ad Hoc nodes, highlight the node within the device list and click Associate. The adapters Network Mode and/or SSID will automatically change to match the selected devices configuration settings. In addition, you can use the Snoop Tool to monitor the amount of radio traffic in your area or perform a Transmission Success Rate test with any of the detected Access Points. Note:
A drop-down menu appears when you right-click an entry within the 802.11a Networks list. The menu contains Associate and Transmission Test options. Snoop Tool The Snoop Tool sweeps the available 802.11a Channels in the 5 GHz band and reports the radio activity it detects. The tool scans each Channel in turn, as indicated by the red outline. When a signal is detected, the tool displays the signals maximum and average RSSI (Received Signal Strength Indicator) value. This value is reported as a percentage; a higher percentage means a stronger signal. If there are no other 802.11a products operating in the area, received signals indicate potential sources of interference. If there are 802.11a Access Point or Ad Hoc networks operating nearby, the tool will report their signal strength. Harmony Utility 56 Click one of the Channels in the Channel RSSI Map to determine if any 802.11a devices are transmitting at that frequency. A selected Channel has a blue outline. If one or more 802.11a Access Points are using the selected Channel, information about these Access Points will appear in the APs on specific channel selected from RSSI Map box. This is the same information that is reported in the 802.11a Networks screen (BSSID, SSID, Channel, and Signal Strength). To associate with one of the detected Access Points, highlight the Access Points entry in the APs on specific channel selected from RSSI Map box and click Associate. The 802.11a adapter will automatically associate with the selected Access Point once the Snoop Tool is closed. Packet Transmission Success Rate Select one of the detected Access Points in the 802.11a Networks screen and click Transmission Success Rate to determine the link quality between the adapter and the selected device. Note:
The Packet Transmission Success Rate screen displays the Network Name (i.e., SSID) and MAC address of the selected Access Point. The adapter sends a series of packets to the selected device and monitors the number of replies it receives. This information is converted to a percentage and plotted on a graph, as shown in the following example. Performing a Transmission Test will reset the adapters statistics. Harmony Utility 57 In addition, the utility displays the current success rate in the Instantaneous Success field and the average success rate (since the beginning of the test) in the Average Success field. By default, the adapter uses a packet size of 500 Bytes and automatically switches between all rates as necessary during the test (greater range generally means a lower transfer rate). However, you can also specify a transfer rate and/or a packet size
(between 1 and 1500 Bytes) using the drop-down menu. If you change either the Transfer Rate or the packet size, click Apply for these changes to take effect. Click Close to exit the Packet Transmission Success Rate screen. Note:
You can only perform a transmission test with an Access Point; you cannot perform a transmission test with an Ad Hoc node. Version Information Click the About tab to view version information for the 802.11a driver and utility. 58 Chapter 6 Troubleshooting The Harmony 802.11a network adapters are designed to be very easy to install and operate. However, if you experience any difficulties, use the information in this chapter to help diagnose and solve the problem. If you still cannot resolve the problem, contact Proxim Technical Support as described in Appendix B, Technical Support and Training, on page 72. How to Obtain Help with Your LAN Installation If you require assistance to install your LAN, Proxim can put you in touch with an 802.11a reseller in your area. The reseller is an expert in the design, installation, and maintenance of LANs and will be able to examine your needs and recommend the most cost-effective solution for your LAN whether you are installing a new LAN or adding on to an existing one. For the location of the Harmony reseller nearest you, contact Proxim at 1-800-229-1630 or 1-408-731-2700 and ask for the Sales Department. Common Installation Problems Chapter 2 describes how to install a Harmony 802.11a network adapter in a computer running Windows 98 Second Edition (SE), Windows Millennium Edition (ME), Windows 2000, Windows XP, or Windows NT. This section provides suggestions to resolve some of the common installation problems with a Harmony 802.11a network adapter. Adapter Inserted Before Running the Installation Program If you inserted the Harmony 802.11a network adapter into a Windows computer before running the Harmony Installation program, you can install the adapter using Microsofts Add New Hardware Wizard (not available for Windows NT users). Troubleshooting 59 Follow these steps:
Note:
PCI Card users should begin at Step #1. CardBus Card users should begin at Step #8. 1. 2. 3. 4. Turn off the computer, unplug its power cord from the wall outlet, and remove the computer cover. Locate an unused PCI slot and refer to your PCs manual for instructions on how to remove the plate that covers the slot (if applicable). Feed the cards antennas through the PCI slot and out the back of the computer. Align the PCI Card over the empty slot and firmly insert the card into the slot, as illustrated below. 5. 6. 7. 8. 9. Secure the cards metal bracket to the computer following the directions provided in your PCs manual and replace the computer cover. Plug the computers power cord back into the wall outlet. Attach the antenna with the longer cable to the antenna base and place the antenna with the longer cable on top of your desk, computer, or monitor. Turn on the computer and logon to Windows, if applicable. CardBus Card users: Insert the 802.11a adapter into an available CardBus slot. 10. Be patient while Windows automatically detects the adapter and launches the Add New Hardware Wizard. Troubleshooting 60 11. Insert the Harmony Installation CD into the computers CD-ROM drive. 12. Follow the on-screen instructions to install the Harmony 802.11a network adapter using the Add New Hardware Wizard. Windows 98/ME users: Insert the Windows installation CD if prompted. If you do not have a Windows installation CD, see Windows ME and Windows 98 SE Installation CD Requirement on page 13. Windows NT users: Proceed to Step #14 if the card is not automatically detected. 13. If prompted, restart the computer and logon to Windows. 14. Run SETUP.EXE from the Harmony Installation CD to launch the Harmony Utility Setup program. 15. Follow the on-screen instructions to install the Harmony Utility. Refer to Chapter 5 beginning on page 36 for information on how to use the Harmony Utility. Windows 98/ME/2000/XP Troubleshooting Adapter Not Listed in Device Manager Follow these steps if you have installed an 802.11a network adapter but it doesnt appear as a network adapter in the Device Manager:
1. Open the Device Manager (located within the Control Panels System icon). Check the Other Devices category for a PCI Ethernet Controller or Ethernet 2. Controller entry. 3. 4. 5. 6. If the entry appears in the Other Devices category, highlight it and click Remove. Close the Device Manager. Shut down the computer and remove the Harmony 802.11a network adapter from the computer. Follow the installation instructions in Chapter 2 to install the Harmony driver and utility. 802.11a Network Adapter Not Installed Properly If the Harmony Device Setup program or Windows Networking reports that the Harmony 802.11a network adapter has not been properly installed or configured after you have completed the Harmony Installation program, open the Device Manager and locate the Harmony 802.11a entry in the Network adapters category. Troubleshooting 61 If a yellow exclamation point (!) appears next to the Harmony 802.11a adapters Device Manager entry, then the adapter is not working properly. Follow these steps:
Uninstall the adapter as described in Uninstalling a Harmony 802.11a Network 1. Adapter on page 63. Reinstall the adapter following the installation instructions in Chapter 2. 2. Configuring Networking Clients and Protocols A Harmony 802.11a network adapter will bind to any existing networking components, such as Client for Microsoft Networks and the Internet Protocol (TCP/IP). Refer to the steps below that correspond to your computers operating system to configure the adapters networking components. Windows XP/2000 Follow these steps to configure a Harmony 802.11a adapters networking clients and protocols in a Windows XP or Windows 2000 computer:
1. Open the Control Panels Network and Dial-up Connections (Windows 2000) or 2. 3. 4. Network Connections (Windows XP) icon. Scroll through the list of network connections and right-click the Local Area Connection that corresponds to the Harmony 802.11a adapter. Select Properties from the drop-down menu to view the connections properties screen. Select a client or protocol from the list of installed components and click Properties to configure its settings. For example, if you want to assign the Harmony 802.11a adapter a static IP address, highlight Internet Protocol (TCP/IP) and click Properties. Note:
To add a new client or protocol, click Install... and follow the on-screen instructions. Troubleshooting 62 Windows ME/98 SE Follow these steps to configure a Harmony 802.11a adapters networking clients and protocols in a Windows 98/ME computer:
1. Open the Control Panels Network icon. 2. Select a client or protocol from the list of installed components and click Properties to configure its settings. For example, if you want to assign the Harmony 802.11a adapter a static IP address, highlight TCP/IP or TCP/IP -> Harmony 802.11a Network Adapter and click Properties. Note:
To add a new client or protocol, click Add... and follow the on-screen instructions. Windows NT Follow these steps to configure a Harmony 802.11a adapters networking protocols in a Windows NT computer:
1. Open the Control Panels Network icon. 2. Click the Protocols tab. 3. 4. 5. 6. 7. Select a protocol from the list of installed components and click Properties to configure its settings. Select the Harmony 802.11a network adapter from the list of installed adapters. Configure the protocol as necessary. Click OK or Apply save your changes. Close the Network screen and restart the computer if prompted. Note:
To add a new client or protocol, click Add... and follow the on-screen instructions. Troubleshooting 63 Uninstalling a Harmony 802.11a Network Adapter Follow these steps if you need to uninstall a Harmony 802.11a network adapter:
Note:
You do not need to uninstall the current software to upgrade to the latest Harmony software. See Upgrading to Version 1.4 on page 22 for details. Right-click the Status Monitor and choose Remove Status Monitor From Task Bar. 1. 2. Open the Control Panel and double-click the Add/Remove Programs icon. 3. 4. 5. 6. 7. 8. 9. Select Harmony 802.11a from the list of installed programs and click Add/Remove... (Windows 98/ME/NT) or Change/Remove (Windows XP/2000). Select Automatic from the list of uninstall options and click Next. Click Finish to continue. Click Remove to remove the Harmony 802.11a Network Adapter. Click Close or OK after the Harmony 802.11a Network Adapter has been removed. If prompted, click Cancel to prevent the computer from restarting. Remove the following driver files, if present:
Note:
By default, Windows will hide some of these file types. Confirm that you have configured Windows to show all files before assuming that these files are not present. The Hidden Files option is available under the Folder Options heading of the Windows Explorers View or Tools menu. Windows 98/ME computers:
C:\WINDOWS\INF\NETPR11A.INF C:\WINDOWS\INF\OTHER\PROXIM,INC.NETPR11A.INF C:\WINDOWS\SYSTEM32\DRIVERS\PROX11A.SYS C:\WINDOWS\SYSTEM\PROX11A.SYS Windows NT computers:
C:\WINDOWS\SYSTEM32\PROX11AN4.DLL C:\WINDOWS\SYSTEM32\DRIVERS\PROX11AN4.SYS Windows 2000 computers:
C:\WINNT\SYSTEM32\DRIVERS\PROX11A.SYS C:\WINNT\INF\NETPR11A.INF C:\WINNT\INF\NETPR11A.PNF Windows XP computers:
C:\WINDOWS\SYSTEM32\DRIVERS\PROX11A.SYS C:\WINDOWS\INF\NETPR11A.INF C:\WINDOWS\INF\NETPR11A.PNF 10. Shut down the computer. 11. Remove the Harmony 802.11a network adapter from the computer. Troubleshooting 64 Range Every environment is unique with different obstacles, barriers, materials, etc., and, therefore, it is difficult to determine the exact range that will be achieved without testing. Radio signals may reflect off of some obstacles or be absorbed by others depending on their construction. The IEEE 802.11a specification supports eight data rates: 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, and 6 Mbps. Harmonys 2X mode supports eight data rates: 108 Mbps, 96 Mbps, 72 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, and 12 Mbps. Operation at 6 Mbps or 12 Mbps provides greater range than operation at 54 Mbps or 108 Mbps. Note:
By default, a Harmony 802.11a network adapter will automatically adjust the data rate to maintain a usable radio connection. Therefore, in 802.11a mode a client that is close to an Access Point may operate at 54 Mbps while a client that is on the fringe of coverage may operate at 6 Mbps. Proper antenna placement can help improve range. Try to keep the adapters antennas free of obstructions (particularly metal objects) and do not place a sheet of metal (like a filing cabinet) between two antennas. Also, Proxim recommends that you use the Harmony Utility to evaluate the signal strength and link quality between 802.11a devices. Products sold in Europe, Japan, and Singapore do not support 2X mode. CardBus Card LED Indicators The Harmony 802.11a CardBus Card includes two green LED indicators on the top of the card near the antenna. These LEDs display the following behavior:
Both LEDs are off when the adapter is not receiving power or when the Harmony driver is not installed. The LEDs blink in an alternating pattern when the adapter is searching for an Access Point (in Infrastructure mode) or Ad Hoc network (in Ad Hoc mode). The LEDs blink in unison every second when the adapter has associated with an Access Point or joined an Ad Hoc network. When there is network activity, the LEDs blink at a faster rate; the LEDs will blink in unison more often as the adapters Send or Receive Rate increases. Troubleshooting 65 Common Technical Support Questions This section discusses some of the most common problems using a Harmony 802.11a network adapter and offers possible solutions. Symptom/Question Possible Solution/Answer I installed the adapter card in the computer before running SETUP.EXE. What should I do?
My office has an existing 802.11b network. Are the Harmony 802.11a adapters compatible?
Follow the on-screen instructions to install the adapter using Microsofts Add New Hardware Wizard. When prompted, point the Wizard to search the Harmony Installation CD for driver files. Then, after you have installed the driver, run SETUP.EXE from the Harmony Installation CD to install the Harmony utility. No. 802.11a devices are not compatible with 802.11b devices. I want to install a Harmony 802.11a network in my office that has an existing 802.11b network. Will the 802.11a network interfere with the 802.11b network?
No. 802.11a and 802.11b devices will not interfere with each other since they operate at different frequencies. 802.11a devices operate in the 5 GHz band, and 802.11b devices operate in the 2.4 GHz band. Is a Harmony 802.11a network adapter compatible with 802.11a products from other vendors?
In throughput tests, the 802.11a network adapter doesnt seem to transfer data as quickly as Id expect. Yes, the Harmony 802.11a adapters are interoperable with 802.11a-compliant products from other vendors. However, if you use 2X mode to achieve data rates up to 108 Mbps, a Harmony 802.11a adapter is only compatible with other 802.11a products from Proxim. Data rate is the raw signaling rate of a networking device; it does not equal data throughput. Actual data throughput is always less than the data rate since some of the available bandwidth is used to send control messages and regulate activity over the wireless medium. Also, throughput will depend on several factors such as network overhead, the file transfer program in use, the computers operating system, and the computers processor speed. Troubleshooting 66 Symptom/Question Possible Solution/Answer How do I determine where to install 802.11a Access Points to ensure that users can access the wireless network from anywhere in my facility?
Ive entered my Harmony User Name and Password but I cant log on to the network. I deferred my Harmony logon until my computer was in range of an Access Point. However, once the 802.11a adapter associated with an Access Point, I could not access the network. Proxim recommends that you perform a site survey following the procedure outlined in Proxims Introduction to Enterprise Wireless Networking and Harmony Technical Training class. If you would like to learn more about the site survey procedure, you should consider signing up for a Proxim Technical Training class in your area. Refer to Proxims Web site at http://training.proxim.com/ for more information. Either your User Name or Password is incorrect or you are not in range of an Access Point. To determine whether or not you are in range of an Access Point, click Cancel to access the Windows desktop and locate the Association State field within the Harmony Utility. Then, log on to Windows again to bring up the Harmony logon prompt. If you are out of range of an Access Point, check the Defer logon for current session if Access Point is out of range box and click Logon. If your User Name or Password is incorrect, contact your network administrator for assistance. Open the Harmony Utilitys Association Information screen and locate the Harmony Security Protocol field. If the field reports User is not authenticated, then either your User Name or Password is incorrect. Try logging on to Windows again. If problems persist, contact your network administrator to confirm your User Name and Password. Troubleshooting 67 Symptom/Question Possible Solution/Answer My Harmony User Name and Password are synchronized with my Windows User Name and Password so the Harmony logon prompt does not appear after I logon to Windows. But now I want to change my Harmony Password. What can I do?
Change your Windows Password; the Harmony logon prompt will reappear after you log on to Windows once your Windows Password and Harmony Password no longer match. Otherwise, contact your network administrator who can change your Password via the Harmony Systems User Database. My computer cant reestablish a network connection when the Harmony Security Protocol is enabled. Do the Harmony adapters support IEEE 802.1X Authentication?
How long will my battery last when using the Harmony 802.11a CardBus Card?
You need to logon to Harmony Security first before logging on to Windows to gain immediate access to network resources. Open the Harmony Utilitys Security screen and place a check mark next to the Log on to Harmony Security before Windows Logon option. Then, save your changes and logon to Windows again. Yes, but you cannot configure 802.1x using the Harmony Utility; you need to use a configuration utility supplied by your RADIUS server vendor. Also, Windows XP provides native support for the IEEE 802.1x standard. See 802.1x on page 34 and page 49 for details. Battery life will vary from unit to unit and depends on many factors including battery type, length of battery life without the CardBus Card inserted, and how frequently the CardBus Card transmits and receives data. Frequent network activity will drain the battery faster than if the card were left idle in doze mode. Configuring the CardBus Card to use one of the Power Saving modes will prolong battery life. However, you should perform some tests under normal operating conditions to accurately determine a devices battery life with the 802.11a CardBus Card. 68 Appendix A Technical Specifications The following technical specification is for reference purposes only. Actual products performance and compliance with local telecommunications regulations may vary from country to country. Proxim Corporation will only ship products that are type approved in the destination country. Technical Specifications General Compatibility ...................................Fully interoperable with IEEE 802.11a compliant products in 802.11a mode Warranty ..........................................3-years parts and labor (return to factory) LED Indicators ..................................Two (2) LEDs indicate Power On, Sleep Mode, Transmit Activity, Association and Power Off Network Information Security ...........................................40, 128 & 152-bit Wired Equivalent Privacy (WEP) data encryption; Harmony Security Protocol;
802.1x authentication Network Architecture........................Supports Ad Hoc peer-to-peer networks and communication to wired infrastructure networks via Access Points Installation & Diagnostics ................Complete configuration utility application included; Utilitys site survey tool surveys other wireless units and reports packet throughput;
Desktop icon continuously reports status Operating System Support...............Windows 98SE, 2000, ME, XP, NT 4.0
(Service Pack 6 or later) 69 Roaming...........................................Seamless among 802.11a compliant access points, including across subnets via Harmony AP Controller Radio Radio Data Rate ...............................54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, 6 Mbps in 802.11a mode;
108 Mbps, 96 Mbps, 72 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps in 2X mode Media Access Protocol......................IEEE 802.11a Frequency Band................................Models 8450 & 8150: 5.15-5.35 GHz Model 8455: 5.15-5.35 & 5.725-5.850 GHz and 5.470-5.725 GHz in Europe
(extended European band) Radio Type .......................................Orthogonal Frequency Division Multiplexing Modulation ......................................64 QAM, 16 QAM, QPSK, BPSK Channels..........................................Varies by country. See Channel on page 30. Environmental Operating Temperature ....................0C to +60C Storage Temperature........................-65C to 150C Humidity ..........................................5% to 95% non-condensing Physical Bus Interface ...................................32-bit CardBus for Models 8450 & 8455;
PCI (Peripheral Components Interconnect) for Model 8150 CardBus Card Voltage .......................3.3 Volts Weight .............................................1.41 ounces (40 g) 70 Parameters Parameter Range Default Network Mode Ad Hoc*, Infrastructure Infrastructure Power Saving
(Infrastructure only) Off, Normal, Maximum Off Disabled any All selected 2X Mode*
SSID Enabled, Disabled Up to 32 characters Channel
(Configurable in Ad Hoc mode; assigned by AP in Infrastructure mode) All Models U.S. & Canada: In 802.11a mode:
Channels 36, 40, 44, 48, 52, 56, 60 & 64;
In 2X mode: Channels 42, 50 & 58 Europe: Channels 36, 40, 44, 48, 52, 56, 60 & 64 Japan: Channels 34, 38, 42 & 46 Singapore: Channels 36, 40, 44 & 48 8455 CardBus Card Only U.S. & Canada: In 802.11a mode:
Channels 149, 153, 157, 161 & 165;
In 2X mode: Channels 152 & 160 Europe: Channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136 & 140 RTS/CTS Enabled, Disabled RTS/CTS Threshold 1 to 2345 Send Rate Automatic or select one of the following:
54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, and 6 Mbps in 802.11a mode; 108 Mbps, 96 Mbps, 72 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, and 12 Mbps in 2X mode Disabled 1 Automatic
(all rates in 802.11a mode) Fragmentation Enabled, Disabled Fragmentation Threshold Security Level 256 to 2345 No Security, Use WEP for Authentication and Encryption, Use Harmony Security Protocol Disabled 2345 No Security Key Size 64 Bit, 128 Bit, 152 Bit 64 Bit
*Ad Hoc mode not available in Europe; 2X mode not available in Europe, Japan, or Singapore. 71 Parameter Range Default WEP Keys
(When Security Level is set to Use WEP for Authentication and Encryption) Up to 4 Keys:
10 hexadecimal digits per key for 64 Bit, 26 hexadecimal digits per key for 128 Bit, 32 hexadecimal digits per key for 152 Bit Blank Default Key One of the four configured WEP Keys WEP Key 1 72 Appendix B Technical Support and Training If you are having a problem using a Harmony 802.11a network adapter and cannot resolve it with the information in Chapter 6, gather the following information and contact Proxim Technical Support:
What kind of network are you using?
What were you doing when the error occurred?
What error message did you see?
Can you reproduce the problem?
What version of the Harmony 802.11a driver are you using?
You can reach Proxim Technical Support by voice, fax, e-mail, or mail:
Tel:
Fax:
Web:
E-mail:
1-800-477-6946 (Toll-free in the U.S. and Canada) 1-408-731-2640 (International) 1-408-731-3676 http://www.proxim.com/
support@proxim.com Proxim Corporation Attn: Technical Support 935 Stewart Drive Sunnyvale, CA 94085 In addition, Proxim offers technical training courses across the United States throughout the year that are designed to teach customers how to maximize the benefits of Proxim products. These classes are taught by experienced Proxim Systems Engineers and have a technical focus. For class and registration information, visit Proxims Web site at http://training.proxim.com. 73 Index A ACK Errors .................................................................................... 53 Ad Hoc............................................................... 17, 20, 23, 28, 40, 70 Add New Hardware Wizard.......................................................... 58, 65 Alternate Installation Instructions ................................................. 5860 Antenna................................................................... 9, 17, 20, 59, 64 Antenna Diversity ........................................................................... 53 Antenna Success............................................................................ 53 Association Information ............................................................. 3739 Association State ........................................................................... 37 Average Packets/Sec...................................................................... 38 B Bad Frame Checksum ...................................................................... 53 Battery Life .................................................................................. 67 BSSID.......................................................................................... 54 Bus Interface................................................................................ 69 C Certificate Authority (CA) ................................................................. 34 Certification ................................................................................... 4 Channel .................................................. 25, 26, 3031, 37, 40, 54, 70 Client for Microsoft Networks............................................................. 61 Common Installation Problems .................................................... 5861 Common Technical Support Questions........................................... 6567 Configuration Parameters ...................................................... 2835, 70 Configure WEP Keys ....................................................................... 42 CTS Errors..................................................................................... 53 D Data Rate .......................................................................... 31, 64, 69 Default Key ......................................................................... 33, 43, 71 Defer Logon for Current Session If Access Point Is Out of Range ............ 47, 66 Device Manager ............................................................................ 60 Direct Sequence Spread Spectrum ..................................................... 27 Disable Device Radio....................................................................... 37 Diversity ...................................................................................... 53 Domain Controller .......................................................................... 45 Duplicate Frames............................................................................ 53 74 E 802.11a. See IEEE 802.11a Standard 802.11a Networks...................................................................... 5457 802.11a....................................................................................... 27 Interoperability ....................................................................... 65 802.11b ...................................................................................... 65 802.1x .............................................................................. 3435, 67 Configuration .................................................................... 4950 Ethernet Controller......................................................................... 60 Excessive Retries........................................................................... 52 Extensible Authentication Protocol (EAP) ............................................. 34 F FCC.................................................................................... 2, 12, 13 Fragmentation ......................................................................... 31, 40 Frequency Band ............................................................................ 69 Frequency Hopping Spread Spectrum ................................................. 27 Funk Odyssey Server ...................................................................... 34 H Harmony 802.11a Access Point........................................ 8, 2426, 28, 5457 Access Point Controller .................................................... 8, 24, 26 Power System........................................................................... 8 Security Protocol ...................................................... 3334, 4548 User Name and Password ..................................... 3334, 46, 66, 67 Utility .............................................................................. 3657 Installation Instructions ....................................... 1517, ??20 Status Monitor.............................................. 17, 20, 3637, 63 I IEEE 802.11a Standard Interoperability ......................................................................... 7 IEEE 802.11b Standard. See 802.11b IEEE 802.1x. See 802.1x Industry Canada............................................................................. 13 Infrared....................................................................................... 27 Infrastructure ................................................ 17, 20, 2426, 28, 40, 70 Installation Instructions .............................................................. 1221 Instantaneous Packets/Sec.............................................................. 38 K Key Size................................................................................. 42, 70 75 L Last ACK RSSI ................................................................................ 53 Last Frames RSSI ........................................................................... 53 LED Indicators (CardBus Card) .......................................................... 64 Link Quality ............................................................................ 5657 Log on to Harmony Security before Windows Logon ........................... 45, 67 M Media Access Protocol.................................................................... 69 Microsoft Windows 2000 Internet Authentication Service (IAS) Server ......... 34 Modulation.................................................................................. 69 Multicast Bytes Received.................................................................. 53 Multicast Bytes Sent ...................................................................... 52 Multicast Packets Received............................................................... 51 Multicast Packets Sent..................................................................... 51 Multiple Retries............................................................................. 52 N NETPR11A.CAT................................................................................ 17 NETPR11A.INF ............................................................................... 63 Network Mode .......................................................... 17, 20, 28, 40, 70 Network Name.............................................................................. 56 Network Traffic Statistics ............................................................. 5153 Networking Client Configuration .................................................................... 6162 New Hardware Wizard. See Add New Hardware Wizard Novell Network .............................................................................. 45 O Orthogonal Frequency Division Multiplexing (OFDM) .......................... 27, 69 P Packet Transmission Success Rate................................................ 5657 Password .......................................................................... 3334, 46 PC Anywhere ................................................................................. 45 PCI Ethernet Controller.................................................................... 60 Power Saving Mode................................................................... 29, 70 Product Certification......................................................................... 4 Product Package ............................................................................. 9 Protocol Configuration .................................................................... 6162 PROX11A.SYS............................................................................ 17, 63 PROX11AN4.SYS ............................................................................ 63 76 R RADIUS Server ......................................................................... 34, 49 Range......................................................................................... 64 Read Keys ......................................................................... 43, 4445 Receive Rate ................................................................................. 53 Regulatory Information and Warnings .......................................... 24, 12 Remove Status Monitor From Task Bar ................................................. 37 Roaming ........................................................................... 2526, 29 RSSI............................................................................................ 53 See also Signal Strength RTS/CTS............................................................................ 32, 40, 70 Run 802.11a Configuration Utility........................................................ 37 S Security Settings ...................................................................... 3235 Configuration .................................................................... 4250 Send Rate..................................................................... 31, 40, 52, 70 SETUP.EXE.................................................................... 15, 18, 60, 65 Signal Strength........................................................................ 38, 54 See also RSSI Single Retries ............................................................................... 52 Site Survey .................................................................................. 66 Snoop Tool ............................................................................. 5556 Spread Spectrum .......................................................................... 27 SSID ................................................................ 25, 26, 28, 40, 54, 70 Station Address ............................................................................. 37 Station Configuration ................................................................ 3941 Statistics. See Network Traffic Statistics Status Monitor.......................................................... 17, 20, 3637, 63 Synchronize Password with Windows Logon ......................................... 48 System Requirements...................................................................... 10 T TCP/IP ......................................................................................... 61 Technical Support.......................................................................... 72 Technical Training.......................................................................... 72 Temperature Operating.............................................................................. 69 Throughput.................................................................................. 65 Topologies.............................................................................. 2326 Transmit Rate. See Send Rate Troubleshooting Suggestions ...................................................... 5867 2X Mode ...................................................................... 27, 29, 65, 70 77 U Unicast Bytes Received .................................................................... 53 Unicast Bytes Sent......................................................................... 52 Unicast Packets Received ................................................................. 51 Unicast Packets Sent....................................................................... 51 Uninstall Instructions ..................................................................... 63 Upgrade Instructions...................................................................... 22 Use Harmony Security Protocol ............................................... 3334, 70 Use WEP for Authentication and Encryption ...................... 3233, 4245, 70 User Database......................................................................... 34, 67 User Name......................................................................... 3334, 46 V Version Information ........................................................................ 57 Voltage....................................................................................... 69 W Warranty Information........................................................................ 2 WEP (Wired Equivalent Privacy) .......................................... 3233, 4245 WEP Key........................................................................ 33, 4345, 71 WEP Undecryptable......................................................................... 53 Windows 2000 .............................................................................. 10 Server ............................................................................. 34, 45 Windows 98/ME............................................................................. 10 Cabinet (CAB) Files ................................................................... 14 Installation CD............................................................... 13, 17, 60 Windows NT............................................................................ 34, 45 Windows XP .................................................................................. 10 Disable Harmony Configuration.................................................... 41 Enabling 802.1x ................................................................. 4950 Wireless Topologies .................................................................. 2326
1 2 | MANUAL | Users Manual | 967.21 KiB | / June 12 2002 |
Harmony Harmony 802.11a Network Adapter User's Guide 2 From the use of the product From the loss of use, revenue or profit of the product As a result of any event, circumstance, action, or abuse beyond the control of Proxim Corporation Copyright 2002 Proxim Corporation, Sunnyvale, CA. All rights reserved. Covered by one or more of the following U.S. patents: 5,231,634; 5,875,179; 6,006,090. This users guide and the software described in it are copyrighted with all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of Proxim Corporation. Trademarks Harmony, the Harmony logo, 2X, Proxim, and the Proxim logo are trademarks of Proxim Corporation. All other trademarks are the property of their respective owners. Limited Warranty, Disclaimer, Limitation Of Liability For a period of three (3) years from the date of purchase by the retail customer, Proxim warrants the Harmony 802.11a CardBus Cards (Models 8450 and 8455) and the Harmony 802.11a PCI Card (Model 8150) against defects in materials and workmanship. Proxim will not honor this warranty if there has been any attempt to tamper with or remove the products external foil label. This warranty does not cover and Proxim will not be liable for any damage or failure caused by misuse, abuse, acts of God, accidents, or other causes beyond Proxims control, or claim by any entity other than the original purchaser. If, after inspection, Proxim determines there is a defect, Proxim will repair or replace the Harmony 802.11a network adapter at no cost to you. To return defective merchandise to Proxim, please call Proxim Technical Support at 1-408-731-2640 to obtain a Return Merchandise Authorization (RMA) number. In no event shall Proxim Corporation be responsible or liable for any damages arising:
Whether such damages be direct, indirect, consequential, special, or otherwise and whether such damages are incurred by the person to whom this warranty extends or a third party. Warranty Return Policy If you have a problem with a Harmony 802.11a CardBus Card (Model 8450 or 8455) or a Harmony 802.11a PCI Card (Model 8150), please call Proxim Technical Support at 1-408-731-2640. Proxim Technical Support will assist with resolving any technical difficulties you may have with your Proxim product. After calling Proxim Technical Support, if your product is found to be defective, you may return the product to Proxim after obtaining an RMA (Return Merchandise Authorization) number. The product must be returned in its original packaging. The RMA number should be clearly marked on the outside of the box. Proxim cannot be held responsible for any product returned without an RMA number, and no product will be accepted without an RMA number. FCC WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Harmony 802.11a Network Adapter Users Guide Part # 2050.0471 Rev. C -- D1 3 The Manufacturer:
Le Constructeur:
Der Hersteller:
Address:
Addresse:
Addresse:
Declares that the Product:
Dclare que le Produit:
Erklrt, dass das Produkt:
Declaration of Conformity Dclaration de Conformit Konformittserklrung Proxim Europe B.V. Prins Bernhardplein 200 1097 JB, P.O. Box 94071, 1090 GB Amsterdam, The Netherlands Type:
Models:
Harmony 802.11a 8450 CardBus Card 8150 PCI Card meets the essential requirements according to article 3 of the following EC-Directive:
est conforme aux exigencies essentielles darticle 3 de la Directive CE:
die grundlegenden Anforderungen gem Artikel 3 der nachstehenden EU-Richtlinie erflt:
Directive 1999/5/EC of the European Parliament and of the Council of 09 March 1999 relating to Radio and Telecommunications Terminal Equipment (R&TTE), including the mutual recognition of their conformity. Directive 1999/5/EC du Parlement Europeen et du Conseil du 09 mache 1999 concernant les radio et equipments terminaux de telecommunications, incluant la reconnaissance mutuelle de leur conformite. Richtlinie 1999/5/EG des Europischen Parlaments und des Rates vom 09. Mrz 1999 ber Funkanlagen und Telekommunikationsendeinrichtungen und die gegenseitige Anerkennung ihrer Konformitt. and that the following harmonized standards have been applied:
et que les standards marmonises suivants ont ete appliqus:
und dass die folgenden harmonisierten Normen angewandt wurden:
EN301893-V1.1.1 EN301489-17 V1.1.1 / September 2000 EN60950
/ December 2000
/ January 2001 Equipment Class Identifier This Product is a Class-2 under the scope of the R&TTE. Be aware that certain countries use other frequencies or have special restrictions of use. This means that products bought elsewhere might cause problems in the above these country(ies) and should be avoided. Consult your Post Telegraph and Telephone office of your country for latest details. Amsterdam, 18 March 2002 Place and Date of the declaration Lieu et date de la declaration Ort und Datum der Konformittserklrung Name and Signature Nom et Signature Name und Unterschrift Carmelo S. Amarena International Product Manager Proxim Corporation & Proxim Europe B.V. 4 For Indoor Use Only These products are for indoor use only. Uniquement pour usage d'intrieur. Somente para uso interno. Solamente para el uso interior. Per uso al coperto solamente. Fr Innen Verwendung nur. Nemlig indendrs hjlp bare. For indoor bruk bare. Fr indoor anvndning enda. Voor overdekt toepassing uitsluitend. Indoor kytt varten vain. Product Approvals Proxim will only ship products that are type approved in the destination country. Refer to Proxims Web site at http://www.proxim.com/support/80211acertifications/ for a list of countries that have approved Proxims 802.11a products. This Web site also details any special requirements that govern the use of 802.11a products in a particular country. An 802.11a product purchased for use in one country may not necessarily comply with the RF regulations in another country. 5 Table of Contents Chapter 1 - Introduction .................................................................................. 7 The Harmony Family .......................................................................................8 The Product Package .....................................................................................9 Harmony 8455 802.11a CardBus Card .......................................................9 Harmony 8450 802.11a CardBus Card ......................................................9 Harmony 8150 802.11a PCI Card ...............................................................9 System Requirements .................................................................................. 10 Overview of Country-Specific Features ..........................................................11 Chapter 2 - Installation .................................................................................. 12 Pre-installation Considerations .................................................................... 12 Regulatory Warnings .............................................................................. 12 Windows ME and Windows 98 SE Installation CD Requirement .............. 13 Note to Customers Using a Laptop Without a CD-ROM Drive ................... 14 Installation Instructions ................................................................................15 Chapter 3 - Wireless Topologies ..................................................................... 19 Ad Hoc ......................................................................................................... 19 Infrastructure ...............................................................................................20 Connecting to a Single AP ......................................................................20 Roaming Between Multiple APs .............................................................. 21 Chapter 4 - Configuration Parameters ............................................................ 23 The IEEE 802.11a Specification ..................................................................... 23 802.11a Software Parameters ....................................................................... 24 Network Mode ....................................................................................... 24 SSID ...................................................................................................... 24 Power Saving Mode ............................................................................... 25 2X Mode ................................................................................................ 25 Roaming ................................................................................................ 25 Channel .................................................................................................26 Send Rate .............................................................................................. 27 RTS/CTS ................................................................................................. 27 Security Settings ....................................................................................28 6 Chapter 5 - Harmony Utility ............................................................................ 30 Status Monitor Icon ..................................................................................... 30 Configuration Utility ..................................................................................... 31 Association Information ......................................................................... 31 Station Configuration ............................................................................. 33 Security .................................................................................................36 Network Traffic Statistics ....................................................................... 42 802.11a Networks .................................................................................. 45 Version Information ............................................................................... 47 Chapter 6 - Troubleshooting .......................................................................... 48 How to Obtain Help with Your LAN Installation .............................................48 Common Installation Problems ....................................................................48 Adapter Inserted Before Running the Installation Program .....................48 Adapter Not Listed in Device Manager .................................................... 50 802.11a Network Adapter Not Installed Properly ..................................... 50 Configuring Networking Clients and Protocols ...............................................51 Windows XP/2000 ..................................................................................51 Windows ME/98 SE ................................................................................51 Uninstalling a Harmony 802.11a Network Adapter ........................................ 52 Range .......................................................................................................... 53 CardBus Card LED Indicators ........................................................................ 53 Common Technical Support Questions ........................................................ 54 Appendix A - Technical Specifications ............................................................. 57 Technical Specifications .............................................................................. 57 Parameters .................................................................................................. 59 Appendix B - Technical Support and Training ................................................... 60 Index............................................................................................................ 61 7 Chapter 1 Introduction Congratulations on your purchase of a Harmony 802.11a network adapter. These products are high performance wireless LAN adapter cards that comply with the IEEE 802.11a standard. This means that they are interoperable with IEEE 802.11a equipment from any manufacturer when operating in 802.11a mode. In addition, they support 2XTM mode*, which provides data rates of up to 108 Mbps. The Harmony 802.11a CardBus Cards (Models 8450 and 8455) and the Harmony 802.11a PCI Card (Model 8150) support Windows XP, Windows 2000, Windows Millennium Edition (ME), and Windows 98 Second Edition (SE). Computers with a Harmony 802.11a network adapter installed look like standard network nodes to the operating system. The Harmony 802.11a network adapters can be used with other 802.11a devices to form a stand-alone wireless Ad Hoc network* or used in conjunction with a Harmony infrastructure to provide mobile clients with wireless access to an Ethernet network. Proxim is the pioneer in wireless broadband networking. Proxims unmatched expertise in radio networking technology, combined with the companys extensive experience serving the communication needs of the mobile computing user, have kept Proxim at the forefront of the wireless LAN market.
*Available features vary by region/country. Introduction 8 The Harmony Family The Harmony network adapters are members of a product family that provides a complete wireless networking solution. The Harmony Access Point Controller Model 7560 centralizes the management, security, and filtering capabilities of a wireless LAN. The Access Point (AP) Con-
troller communicates with Harmony Access Points over the Ethernet network to provide wireless network access for mobile clients. The AP Controller can support multiple APs, even if each AP complies with a different wireless standard. The Harmony Access Point is a networking bridge that operates at Layer 2 of the OSI networking model. Working in conjunction with a Harmony AP Controller, the AP forwards packets between its radio and the Ethernet network. Three models of the Harmony Access Point are available to support the IEEE 802.11a, IEEE 802.11b, or OpenAir wireless standard: the 802.11a Access Point Model 8570/8571, the 802.11b Access Point Models 8550/8551 and the OpenAir Access Point Model 7550. The optional Harmony Power System Model 7562 provides DC power to Harmony APs over the unused pins of a twisted pair Ethernet cable. The Harmony 802.11a CardBus Card is a wireless LAN adapter that fits into a 32-bit CardBus slot in a laptop computer and complies with the IEEE 802.11a standard. Two models are available: Model 8450 and Model 8455. The Harmony PC Card is a wireless LAN adapter that fits into a PCMCIA Type II slot in a laptop computer. Two models are available to support the IEEE 802.11b
(8430 Series) or OpenAir (7430 Series) wireless standard. The Harmony CompactFlash Card is a wireless LAN adapter that fits into a CompactFlash slot in a Pocket PC. Two models are available to support the IEEE 802.11b (Model 8630) or OpenAir (Model 7630) wireless standard. The Harmony PCI Card is a wireless LAN adapter that fits into a standard PCI expansion slot. Two models are available to support the IEEE 802.11a (Model 8150) or 802.11b (Model 8110) wireless standard. The Harmony OpenAir USB Adapter Model 7230 is an OpenAir-compliant wire-
less LAN adapter that connects to a Windows 98/ME/2000 computers Universal Serial Bus (USB) port. Introduction 9 The Product Package The items included with each Harmony 802.11a network adapter are listed below. If any of these items are missing or damaged, please contact your reseller or Proxim Technical Support. Harmony 8455 802.11a CardBus Card Each Harmony 802.11a CardBus Card Model 8455 comes with the following:
One 802.11a CardBus Card with two integral antennas (antennas are inside the casing and not visible to the user) One Harmony 802.11a Installation CD-ROM containing Proxim software and utilities and this users guide in Portable Document Format (PDF) One Harmony 8455 802.11a CardBus Card Quick Start Guide One warranty registration card Harmony 8450 802.11a CardBus Card Each Harmony 802.11a CardBus Card Model 8450 comes with the following:
One 802.11a CardBus Card with two integral antennas (antennas are inside the casing and not visible to the user) One Harmony 802.11a Installation CD-ROM containing Proxim software and utilities and this users guide in Portable Document Format (PDF) One Harmony 8450 802.11a CardBus Card Quick Start Guide One warranty registration card Harmony 8150 802.11a PCI Card Each Harmony 802.11a PCI Card Model 8150 comes with the following:
One 802.11a PCI Card with two integral antennas (one antenna has a longer cable than the other) One Harmony 802.11a Installation CD-ROM containing Proxim software and utilities and this users guide in Portable Document Format (PDF) One Harmony 8150 802.11a PCI Card Quick Start Guide One warranty registration card Introduction 10 System Requirements To begin using a Harmony 802.11a network adapter, you must have the following minimum requirements:
A computer that meets the following specifications:
Windows XP, Windows 2000, Windows Millennium Edition (ME), or Windows 98 Second Edition (SE) installed CardBus Card users: PC Card expansion slot (32-bit CardBus) PCI Card users: PCI (Peripheral Components Interconnect) expansion slot At least 64 MB of memory A 300 MHz processor or higher At least one other IEEE 802.11a-compliant device Adapters sold in Europe require an 802.11a-compliant Access Point
(peer-to-peer Ad Hoc mode is not available in Europe) Introduction 11 Overview of Country-Specific Features This users guide provides information on how to install and use the Harmony 802.11a CardBus Card and the Harmony 802.11a PCI Card. Product features vary by region/country. The following table summarizes the product differences based on region:
U.S./Canada Europe Japan 2X Mode Available Not available Not available Ad Hoc Mode Available Not available Available Number of Channels 8
(3 in 2X Mode) 8 4 12 Chapter 2 Installation This chapter describes how to install a Harmony 802.11a network adapter and software in a computer running Windows XP, Windows 2000, Windows Millennium Edition (ME), or Windows 98 Second Edition (SE). Note:
Run the Harmony Installation program before installing the 802.11a network adapter in the computer. Pre-installation Considerations Review the following pre-installation considerations before installing a Harmony 802.11a network adapter. Regulatory Warnings FCC Guidelines It is the responsibility of the installer and users of the Harmony 802.11a PCI Card Model 8150 to guarantee that the antennas are operated at least 20 centimeters from any person. This is necessary to insure that the product is operated in accordance with the RF Guidelines for Human Exposure which have been adopted by the Federal Communications Commission. Radio Frequency Interference Requirements The Harmony 802.11a CardBus Cards, Models 8450 and 8455, and the Harmony 802.11a PCI Card, Model 8150, operate in the frequency range of 5.15 to 5.35 GHz; they are restricted to indoor use due to their operation in the 5.15 to 5.25 GHz frequency range. FCC 15.407(e) requires that these devices be used indoors in the frequency range of 5.15 to 5.25 GHz to reduce the potential or harmful interference to co-channel Mobile Satellite systems. Therefore the devices should be used indoor only for channel 36, 40, 44, and 48 and when 2X mode is enabled, channel 42 and 50. Installation 13 High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz band. These radar stations can cause interference with and/or damage the Harmony 802.11a CardBus Cards and/or Harmony 802.11a PCI Card. DECLARATION OF CONFORMITY We, Proxim Corporation, 510 DeGuigne Drive Sunnyvale, CA 94085 USA 408-731-2700 declare under our sole responsibility that the Harmony 802.11a CardBus Cards, Models 8450 and 8455, and the Harmony 802.11a PCI Card, Model 8150, comply with Part 15 of FCC Rules. Operation of either product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Industry Canada Guidelines The Harmony 8150 802.11a PCI Card has been designed to operate with an antenna having a maximum gain of 3 dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canadas website http://www.hc-sc.gc.ca/rpb. Windows ME and Windows 98 SE Installation CD Requirement Before beginning the installation of an 802.11a network adapter, confirm that you have a Windows 98 SE or Windows ME installation CD available (depending on the computers operating system). Windows 98/ME users may be prompted to insert a Windows CD during the installation. You should not need a Windows CD when installing an 802.11a network adapter in a Windows XP or Windows 2000 computer. If you do not have a Windows 98/ME CD, it is possible that you already have the Windows installation files on your hard disk. These Windows installation files are known as Windows Cabinet or CAB files. The Cabinet files are commonly located in C:\WINDOWS\OPTIONS\INSTALL\ or C:\WINDOWS\OPTIONS\CABS\. Note:
Windows 98/ME users may need the Windows CD or Cabinet files to com-
plete the installation of an 802.11a network adapter. Proxim recommends that you do not proceed with the installation until you have confirmed that you have one of these Windows installation media available. Installation 14 Note to Customers Using a Laptop Without a CD-ROM Drive If you are installing the 802.11a CardBus Card in a laptop that does not have a CD-ROM drive or if your CD-ROM drive is an external device that shares a single CardBus slot with network adapter cards, you should follow the steps below prior to installing the 802.11a CardBus Card:
1. Windows 98/ME users: Confirm that the Windows cabinet (CAB) files are installed on the computer. The CAB files are typically located in C:\WINDOWS\OPTIONS\INSTALL\ or C:\WINDOWS\OPTIONS\CABS\. 2. Windows 98/ME users: If the computer does not have the CAB files installed, copy the Win98 or Win9x folder found on the Windows CD-ROM to a temporary folder on the computer. 3. 4. Copy the contents of the Harmony 802.11a Installation CD-ROM to a temporary folder on the computer. Alternatively, you may download the software from Proxims Web site at http://www.proxim.com/support/. Follow the installation instructions contained in this chapter. When the instructions call for either the Windows CD or the Harmony Installation CD, search the CAB files or the temporary folders you created in Steps #2 and 3. 5. When the installation is complete, remove the temporary folders you created in Steps #2 and 3 from the computers hard drive. Installation 15 Installation Instructions The instructions below describe how to install a Harmony 802.11a network adapter by running the Harmony Installation program before inserting the adapter into the computer. The Harmony Installation program installs the Harmony Utility first, and then it installs the Harmony 802.11a network adapter and driver. If you inserted an 802.11a adapter before running the Harmony Installation program, see Adapter Inserted Before Running the Installation Program on page 48 for instructions. Follow these steps to install a Harmony 802.11a network adapter in a Windows 98 SE, Windows ME, Windows 2000, or Windows XP computer. 1. 2. Turn on the computer and logon to Windows, if applicable. Insert the Harmony Installation CD into the computers CD-ROM drive. 3. If the Harmony Installation program does not launch automatically, run SETUP.EXE from the Harmony Installation CD to launch the program, shown in the following example. 4. 5. 6. 7. Click Next to continue. Select a destination folder for the Harmony Utility files and click Next to continue. Enter a name for the utilitys Program Manager group and click Next. Click Next to install the utility. Installation 16 8. Click Finish to view additional information about the utility. Note:
To avoid viewing the additional information, uncheck the Read Harmony configuration instructions box before clicking Finish. 9. Click Finish to complete the Harmony Utility installation and to continue the installation of a Harmony 802.11a network adapter. 10. The Harmony Device Setup wizard will prompt you to insert a Harmony 802.11a network adapter, as shown below. Harmony 802.11a CardBus Card users: Insert the CardBus Card into an available CardBus slot and proceed to Step #11. Harmony 802.11a PCI Card users: Follow these steps:
Click Cancel. Shut down the computer, unplug its power cord from the wall outlet, and remove the computer cover. Locate an unused PCI slot and refer to your PCs manual for instructions on how to remove the plate that covers the slot (if applicable). Feed the cards antennas through the PCI slot and out the back of the computer. Align the PCI Card over the empty slot and firmly insert the card into the slot. See page 48 for a sample illustration. Secure the cards metal bracket to the computer following the directions pro-
vided in your PCs manual and replace the computer cover. Plug the computers power cord back into the wall outlet. Installation 17 Attach the antenna with the longer cable to the antenna base and place it on top of your desk, computer, or monitor. Turn on the computer and proceed to Step #11. 11. Follow the on-screen instructions to install the network adapter. Note the following:
If prompted to identify the location of the file Prox11a.sys or Netpr11a.cat, direct the installation wizard to search the Harmony Installation CD. Windows XP users: If prompted, select Install the software automatically
(Recommended) and click Next. Windows 98/ME users: Insert the Windows installation CD if prompted. If you do not have a Windows installation CD, see Windows ME and Windows 98 SE Installation CD Requirement on page 13. 12. Restart the computer if prompted. Otherwise, click Close when prompted that the Harmony 802.11a network adapter has been properly configured. Note:
If the Harmony Device Setup program or Windows Networking reports that the Harmony 802.11a network adapter has not been properly configured, fol-
low the on-screen instructions and refer to Chapter 6 for troubleshooting suggestions. 13. The Harmony Utilitys Status Monitor icon will appear in Windows Taskbar, as shown below. 14. The Harmony 802.11a network adapter is now ready for use. Use the Harmony Utility (described in Chapter 5) to configure the adapter and determine if it is communicating with other 802.11a devices. Note:
PCI Card users may need to enable Harmony Configuration before using the Harmony Utility. See Note to Windows XP Users on page 35 for details. If you have one or more 802.11a Access Points, configure the Harmony 802.11a network adapters Network Mode to Infrastructure. If your network consists of only 802.11a client adapters, set Network Mode to Ad Hoc. Note:
Products sold in Europe do not support Ad Hoc mode. For more information on Ad Hoc and Infrastructure networks, see Chapter 3 beginning on page 19 and Network Mode on page 24. Installation 18 Related Topics See Chapter 4 beginning on page 23 for a discussion of the 802.11a configuration parameters. Refer to Chapter 5 beginning on page 30 for information on how to use the Harmony Utility. See Configuring Networking Clients and Protocols on page 51 for information on how to configure a networking protocol like TCP/IP (so you can configure the 802.11a network adapters IP settings). 19 Chapter 3 Wireless Topologies Harmony wireless products look and operate similar to Ethernet products. The only difference is that a radio replaces the wire between various nodes. This means that all of your existing applications that operate over Ethernet will work with Harmony without any special wireless networking software. The Harmony 802.11a network adapters support several network topologies, which are described in this chapter. Ad Hoc Two or more computers easily establish an ad hoc network when the units are in range of each other. Each computer can dynamically connect and reconnect to the others with no additional configuration, using off-the-shelf peer-to-peer network operating systems, as illustrated in Figure 1. Figure 1 Ad Hoc To use a Harmony 802.11a network adapter as a member of an Ad Hoc network with other 802.11a-compatible cards, configure the adapter to operate in Ad Hoc mode. See Network Mode on page 24 for details. Note:
Products sold in Europe do not support Ad Hoc mode. Wireless Topologies 20 Infrastructure Many companies have an existing Ethernet or wired LAN infrastructure and want to be able to extend that capability to wireless nodes. This is accomplished by installing a Harmony Access Point Controller and one or more Harmony 802.11a Access Points on the Ethernet network. The Harmony Access Point Controller and 802.11a Access Points work together to provide wireless clients with access to network resources. Connecting to a Single AP Figure 2 depicts a Harmony network that uses a single Access Point (AP). Figure 2 Single AP Wireless Topologies 21 Roaming Between Multiple APs For larger environments, Harmony 802.11a client devices may roam from one Harmony 802.11a Access Point to another while maintaining the same network connection. The 802.11a Access Points establish coverage areas or cells similar in concept to those of a cellular phone network. The mobile clients will connect to any 802.11a Access Point that is within range. Figure 3 Roaming Each Harmony 802.11a Access Point within a roaming network must have a unique, independent Channel, but all must have the same SSID and security settings (if applicable). Mobile clients equipped with a Harmony 802.11a network adapter are configured to operate in Infrastructure mode and have the same SSID and security settings as the Access Points. Alternatively, the mobile client may use an SSID of any to associate with any available Access Point, regardless of the Access Points SSID. Wireless Topologies 22 As the mobile client seamlessly switches from cell to cell, its network connectivity is preserved. The user can move freely between the Harmony 802.11a Access Points in the network. When the roaming client leaves the transmission range of one 802.11a Access Point, the software automatically polls the other 802.11a Access Point(s) in the same Extended Service Set (ESS) to continue the network connection. Note:
The Access Points cells must overlap to ensure that there are no gaps in cov-
erage so that the roaming client will always have a connection available. See Figure 3 for an example of a roaming Infrastructure network. In addition, Harmony 802.11a Access Points may be installed on different IP subnets from the AP Controller, allowing mobile users to roam across routers. For more information on the Harmony AP Controller and Access Points, refer to the Harmony Access Point Controller Users Guide. Guidelines for Roaming A Harmony 802.11a client can only roam between Harmony 802.11a Access Points. An 802.11a client cannot communicate with Harmony 802.11b or OpenAir Access Points. All Harmony 802.11a Access Points must have the same SSID. All workstations with Harmony 802.11a client adapters installed must use either an SSID of any or the same SSID as the Access Points that they will roam between. All 802.11a Access Points and clients must have the same security settings to communicate. The Access Points cells must overlap to ensure that there are no gaps in coverage and to ensure that the roaming client will always have a connection available. Access Points in the same vicinity should each use a unique, independent Chan-
nel to avoid potential interference. Access Points that use the same Channel should be installed as far away from each other as possible to reduce potential interference. 23 Chapter 4 Configuration Parameters This chapter provides information on the 802.11a wireless standard and describes the Harmony 802.11a configuration parameters. The IEEE 802.11a Specification In 1997, the Institute of Electrical and Electronics Engineers (IEEE) adopted the 802.11 standard for wireless devices operating in the 2.4 GHz frequency band. This standard includes provisions for three radio technologies: direct sequence spread spectrum, frequency hopping spread spectrum, and infrared. Devices that comply with the 802.11 standard operate at a data rate of either 1 or 2 Mbps. In 1999, the IEEE modified the 802.11 standard to support devices operating in the 5 GHz frequency band, calling this new standard 802.11a. 802.11a devices are not backwards compatible with 2.4 GHz 802.11 or 802.11b devices. 802.11a radios use a radio technology called Orthogonal Frequency Division Multiplexing (OFDM) to achieve data rates of up to 54 Mbps. In addition, the Harmony 802.11a network adapters support 2XTM Mode. This mode is not part of the IEEE 802.11a specification but it allows data rates of up to 108 Mbps. See 2X Mode on page 25 for details. 2X Mode is not available in all countries. Configuration Parameters 24 802.11a Software Parameters The following configuration parameters are available for a Harmony 802.11a network adapter. Refer to Chapter 5 for instructions on how to change these configuration settings using the Harmony Utility. Network Mode Network Mode configures a Harmony 802.11a network adapter to operate in either Ad Hoc mode or Infrastructure mode. When set to Ad Hoc, all Harmony 802.11a devices must have the same SSID, Channel, and WEP Keys (if WEP is enabled) to communicate. An Ad Hoc network is a wireless network that consists of only 802.11a client adapters (i.e., a network that does not have an Access Point). Note:
When set to Infrastructure mode, an 802.11a network adapter must have the same SSID and security settings as the Access Points on the network to communicate. An Infrastructure network is any network that includes one or more 802.11a Access Points. By default, the adapter operates in Infrastructure mode. Products sold in Europe do not support Ad Hoc mode. SSID The SSID (Service Set ID), which is also referred to as the ESSID (Extended Service Set ID), is a text string that all members of the same 802.11a network share. The SSID may be up to 32 alphanumeric characters long, including spaces. Also, when configured to any, a Harmony 802.11a network adapter can communicate with any available Access Point regardless of the Access Points SSID. In an Infrastructure network, the SSID must match on all Harmony 802.11a Access Points and 802.11a clients (unless a clients SSID is any). Devices that do not share the same SSID cannot communicate. In an Ad Hoc network without an Access Point, each 802.11a device must have the same SSID to participate in the network. A node cannot use the any SSID to join an Ad Hoc network. By default, an 802.11a adapters SSID is set to any. Configuration Parameters 25 Power Saving Mode The Harmony 802.11a network adapters support optional power management to conserve battery life. Power Saving Mode is only available if the adapter is operating in Infrastructure mode. When Power Saving Mode is set to Normal or Maximum, a Harmony 802.11a network adapter enters a doze mode where the card becomes inactive and only wakes up periodically to receive control messages from the Access Point. The card wakes up more often in Normal mode than in Maximum mode so a card in Normal mode will respond sooner to network requests than a node in Maximum mode. However, Maximum mode draws less power than Normal mode. When an Access Point receives a packet destined for a dozing client, it buffers the packet and includes a notification within its control message to alert the client that a packet is waiting for it. Once the card receives the control message, it polls the Access Point to request that the buffered packet be sent to it. Products sold in Europe and Japan do not support 2X mode. 2X Mode The Harmony 802.11a network adapters support 2XTM mode, a high-speed operating mode that can provide data rates of up to 108 Mbps, twice the speed of standard 802.11a devices. By default, 2X mode is disabled. Note:
When 2X mode is disabled, a Harmony 802.11a adapter complies with the IEEE 802.11a standard, can operate on one of eight Channels, and can achieve speeds of up to 54 Mbps. When 2X mode is enabled, a Harmony 802.11a adapter does not comply with the IEEE 802.11a standard, can operate on one of three Channels, and can achieve speeds of up to 108 Mbps. Note:
You must configure all devices in the same network to use 2X mode. A device in 2X mode cannot communicate with a device in 802.11a mode. Roaming The Roaming parameter allows you to determine how tolerant a Harmony 802.11a adapter is to radio phenomena that can cause the unit to roam from one Access Point to another in order to maintain a strong wireless connection. In areas with many 802.11a Access Points that provide heavy overlapping coverage, set this parameter to Fast to maintain high throughput for each wireless adapter. In most networks, set Roaming to Normal. Wireless adapter throughput will not change noticeably, and an overabundance of Access Points is not required. If the coverage area provided by 802.11a Access Points is sparse, set Roaming to Slow. Harmony adapters will not roam until they are nearly out of range of the Access Point with which they are associated. Configuration Parameters 26 Channel 802.11a devices spread a radio signal over a range of frequencies. The IEEE 802.11a specification allocates the available frequencies in the 5 GHz band into a series of operating Channels that are identified by a Channel number and a center carrier frequency. An 802.11a network adapter configured for Infrastructure mode receives a Channel assignment from its Access Point. You cannot configure the Channel for an adapter operating in Infrastructure mode. For an Ad Hoc network, all nodes must use the same Channel to communicate. You can configure the adapter to scan multiple Channels to locate an Ad Hoc network or you can configure it to use a specific Channel. See Station Configuration on page 33 for details. The number of available Channels varies by region. For United States and Canada:
An 802.11a network adapter can use one of eight Channels in 802.11a-compliant mode: Channel 36 (5.18 GHz), Channel 40 (5.20 GHz), Channel 44 (5.22 GHz), Channel 48 (5.24 GHz), Channel 52 (5.26 GHz), Channel 56 (5.28 GHz), Channel 60 (5.30 GHz), and Channel 64 (5.32 GHz). An 802.11a network adapter can use one of three Channels in 2X mode: Channel 42
(5.21 GHz), Channel 50 (5.25 GHz), and Channel 58 (5.29 GHz). If you wish to install multiple Ad Hoc networks in the same vicinity, Proxim recommends that you configure each network with a unique Channel to avoid interference between networks. Keep in mind that each Channel in 2X mode overlaps multiple Channels in 802.11a mode. For example, if an Ad Hoc network in 2X mode is using Channel 50, do not configure nearby networks in 802.11a mode for Channel 42, 48, 52, or 56. Note:
See Radio Frequency Interference Requirements on page 12 for important regulatory information concerning Channel selection. For Europe:
An 802.11a network adapter can use one of eight Channels: Channel 36 (5.18 GHz), Channel 40 (5.20 GHz), Channel 44 (5.22 GHz), Channel 48 (5.24 GHz), Channel 52
(5.26 GHz), Channel 56 (5.28 GHz), Channel 60 (5.30 GHz), and Channel 64 (5.32 GHz). For Japan:
An 802.11a adapter can use one of four Channels: Channel 34 (5.17 GHz), Channel 38
(5.19 GHz), Channel 42 (5.21 GHz), or Channel 46 (5.23 GHz). If you wish to install multiple Ad Hoc networks in the same vicinity, Proxim recommends that you configure each network with a unique Channel to avoid interference between networks. Configuration Parameters 27 Send Rate The IEEE 802.11a specification supports eight data rates: 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, and 6 Mbps. Harmonys 2X mode supports eight data rates: 108 Mbps, 96 Mbps, 72 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, and 12 Mbps. As a mobile client travels away from an 802.11a Access Point (when in Infrastructure mode) or from other 802.11a nodes (when in Ad Hoc mode), the data rate automatically decreases in order to maintain a usable radio connection. For example, in an Infrastructure network that is using 2X mode, a client that is close to an Access Point may operate at 108 Mbps, but a client that is far away from the Access Point may operate at 12 Mbps. By default, a Harmony 802.11a network adapter automatically adjusts the transmit rate depending on the mode of operation (802.11a-compliant or 2X). However, you can also manually configure a specific send rate that an adapter will use. For example, if you configure the Send Rate to 36 Mbps, a Harmony 802.11a adapter will operate at 36 Mbps. RTS/CTS The 802.11a standard supports optional RTS/CTS communication based on packet size. By default, RTS/CTS communication is disabled. Without RTS/CTS, a sending radio listens to see if another radio is already using the medium before transmitting a data packet. If the medium is free, the sending radio transmits its packets. However, there is no guarantee that another radio is not transmitting a packet at the same time, causing a collision. When RTS/CTS occurs, the sending radio first transmits a Request to Send (RTS) packet to confirm that the medium is clear. When the receiving radio successfully receives the RTS packet, it transmits back a Clear to Send (CTS) packet to the sending radio. When the sending radio receives the CTS packet, it sends the data packet to the receiving radio. The RTS and CTS packets contain a reservation time to notify other radios that the medium is in use for a specified period. This helps to minimize collisions. While RTS/CTS adds overhead to the radio network, it is particularly useful for large packets that take longer to resend after a collision occurs. You may configure a Harmony 802.11a network adapter to never use RTS/CTS (i.e., disable RTS/CTS) or to use RTS/CTS for packets over a certain size. For example, if the RTS/CTS Threshold is set to 1000 Bytes, then a sending radio will use RTS/CTS before transmitting any packet 1000 Bytes or larger. The RTS/CTS Threshold parameter supports a range between 1 and 2345 Bytes. When set to 1, a sending radio will use RTS/CTS before transmitting any packet. Configuration Parameters 28 Security Settings The Harmony 802.11a adapters offer three security settings: No Security, Use WEP for Authentication and Encryption, and Use the Harmony Security Protocol. WEP Encryption and Authentication The IEEE 802.11a standard specifies an optional encryption feature, known as Wired Equivalent Privacy or WEP, that is designed to provide a wireless LAN with a security level equal to what is found on a wired Ethernet network. WEP encrypts the data portion of each packet exchanged on the 802.11a network using a 64-bit, 128-bit, or 152-bit encryption key (also known as a WEP Key). In addition, Harmony 802.11a devices use WEP with Shared Key Authentication to prevent unauthorized devices from associating with an 802.11a network. When WEP is enabled, two 802.11a devices must have the same WEP Keys and both devices must be configured to support WEP in order to communicate. If one device is configured to use WEP for Authentication and Encryption but a second device is not, then the two devices will not communicate, even if both devices have the same WEP Keys. WEP Keys An 802.11a device with WEP enabled uses a WEP Key to encrypt and decrypt information. A user must manually enter the networks WEP Keys on each 802.11a device. If the WEP Keys do not match on two radios, no data communication will take place between these devices. A Harmony 802.11a network adapter can support up to four WEP Keys (all four Keys must have the same Key Size). A Harmony 802.11a adapter can decrypt information that was encrypted with any of its four WEP Keys, but it will only use the Default Key to encrypt outgoing information. For 64-bit encryption, a WEP Key is 10 hexadecimal digits (0-9 and A-F); for 128-bit encryption, a WEP Key is 26 hexadecimal digits (0-9 and A-F); and for 152-bit encryption, a WEP Key is 32 hexadecimal digits (0-9 and A-F). Note:
When WEP is enabled, Proxim recommends that you configure all 802.11a devices in the Extended Service Set with the same WEP Keys in the same order (but the devices do not need to use the same default Key). Configuration Parameters 29 Harmony Security Protocol The Harmony Security Protocol automates encryption management, assigning a unique and dynamic WEP Key to each user. The Harmony Security Protocol includes the following features:
Uses 152-Bit WEP Encryption Generates a unique WEP Key for each user that is valid only for the current net-
work session Periodically renews the users Harmony session and assigns a new WEP Key without requiring any end user interaction Incorporates the end users logon prompt into Microsoft Windows standard logon procedure on the client device Each Harmony device plays a role in the Harmony Security Protocol: the AP Controllers maintain a database of user name and passwords to authenticate users; the Access Points block all network traffic to or from a client until after the user has been successfully authenticated by the Harmony System; and the Harmony client adapters include a software utility that incorporates the Harmony logon prompt into the standard Windows logon procedure. When the Harmony Security Protocol is enabled on a client adapter, the user is prompted to enter his or her Harmony User Name and Password during boot up, either immediately before or after the Windows logon prompt (depending on the device configuration). Once the user has been authenticated by the Harmony System, the 802.11a adapter receives a unique 152-bit WEP Key from the Harmony System, and it can begin to exchange data with the Ethernet network. Refer to the Harmony Access Point Controller Users Guide for more information on the Harmony Security Protocol. Harmony Security Protocol Guidelines If you want to use the Harmony Security Protocol on your network, you must enable the protocol on all of your networks Harmony 802.11a Access Points and Harmony 802.11a clients. At this time, the Harmony Security Protocols client application supports Windows 98 SE, Windows ME, Windows 2000 Professional, and Windows XP. The protocol does not support Windows 2000 Server. The Harmony Security Protocol is only available for clients that are operating in Infrastructure mode. A network administrator who manages the networks Harmony Access Point Con-
troller(s) must assign each user a Harmony User Name and Password and enter this information into the Harmony Systems User Database. Refer to the Harmony Access Point Controller Users Guide for details. If you enable the Harmony Security Protocol, you do not need to configure WEP Keys (the Harmony System will generate keys for you). 30 Chapter 5 Harmony Utility Proxim provides a software utility that simplifies the management and configuration of a Harmony 802.11a network adapter. Chapter 2 describes how to install the utility. This chapter describes how to use the Harmony Utility after it has been installed. Status Monitor Icon After you have installed the Harmony Utility, the Status Monitor icon will appear in Windows Taskbar. If the Harmony 802.11a network adapter cannot locate an Access Point or an Ad Hoc network (either because the 802.11a settings do not match or the other devices are out of range), the icon will appear as follows:
When the Harmony 802.11a network adapter is associated with an Access Point or has joined an Ad Hoc network, the icon will appear as follows:
Also, you can view additional information about the adapters network status when the mouse cursor is placed over it, as shown below. Right-click the icon and select Run 802.11 Configuration Utility to launch the 802.11a Configuration Utility. Double-clicking the icon also launches the utility. To close the Status Monitor, right-click the icon and select Remove Status Monitor From Task Bar from the drop-down menu. Harmony Utility 31 Configuration Utility The Harmony Utility includes several tools for diagnostic and configuration purposes. Each of the utilitys screens is described below. For additional information about the Harmony Utility, click Help on any screen to view on-line Help documentation. Association Information The Association Information screen, shown in the example below, displays information about the adapters connection with the 802.11a network. The Association Information screen reports the following statistics:
Association State: This field reports if the adapter is communicating with an Access Point (AP) or Ad Hoc network. When communicating with an AP, this field reports ASSOCIATED AP and displays the APs physical address. When commu-
nicating with an Ad Hoc network, this field displays JOINED AD HOC MODE. If no AP or Ad Hoc network is found, this field displays NOT JOINED. Harmony Utility 32 Station Address: This field displays the adapters physical address (also known as MAC address). This address is configured at the factory. Channel (Freq): This field displays the current Channel and center frequency that the adapter is using. See Channel on page 26 for details. Harmony Security: Reports the status of the Harmony Security Protocol: Dis-
abled, Enabled, Not Authenticated, User Not Logged In, User Associ-
ated, and User is using Unique Encryption Key (with time of login). The Harmony Security Protocol only supports Infrastructure mode; if a client is in Ad Hoc mode, this field reports: Harmony Security does not support Ad Hoc Mode. This field is not visible on computers running Windows 2000 Server. Send Signal Strength: The Signal bar displays the signal strength for the last acknowledgment (ACK) received by the adapter. Signal strength is reported in decibels (dB). The color-coded chart below the Signal bar indicates the relative strength of the signal: a signal in the red or orange section indicates a weak con-
nection; a signal in the yellow or light green section indicates a good connection;
a signal in the darker green section indicates an excellent connection. Instantaneous Packets/Sec Sent: This statistic displays the current rate at which the adapter is transmitting packets to another 802.11a device. This information is represented as the number of packets sent per second by the adapter and is plotted on the graph located below the Packets/sec field. Note that this statistic will remain zero unless the adapter is transmitting data to another 802.11a device. Average Packets/Sec Sent: This statistic displays the average number of packets transmitted by the adapter each second since the Configuration Utility was launched. Receive Signal Strength: The Signal bar displays the signal strength for the last packet received by the adapter. Signal strength is reported in decibels (dB). The color-coded chart below the Signal bar indicates the relative strength of the sig-
nal: a signal in the red or orange section indicates a weak connection; a signal in the yellow or light green section indicates a good connection; a signal in the darker green section indicates an excellent connection. Instantaneous Packets/Sec Received: This statistic displays the current rate at which the adapter is receiving packets from another 802.11a device. This infor-
mation is represented as the number of packets received per second by the adapter and is plotted on the graph located below the Packets/sec field. Note that this statistic will remain zero unless the adapter is receiving data from another 802.11a device. Average Packets/Sec Received: This statistic displays the average number of packets received by the adapter each second since the Configuration Utility was launched. Harmony Utility 33 Station Configuration Click the Configuration tab to view the Station Configuration screen, shown below. Edit the configuration parameters as necessary and click Apply to save your changes. To change the operating Channel, Send Rate, and RTS/CTS settings, click the button labeled Advanced Configuration to display these parameters, as shown in the example on the next page. The configuration parameters are described in Chapter 4 beginning on page 23; some options may not be available in all countries (see Overview of Country-Specific Features on page 11 for details). Note that the Channel selection box is unavailable when the Network Mode is set to Infrastructure. When Network Mode is set to Ad Hoc, you can configure one or more Channels for the adapter to scan. If you select multiple Channels, the adapter will scan each Channel looking for an Ad Hoc network to join that uses the same SSID as the adapter. Harmony Utility 34 Harmony Utility 35 Note to Windows XP Users Windows XP provides built-in support for wireless networks. Windows XPs wireless network management features are used in lieu of the Harmony Utility. For PCI Card users, support for the Harmony Utility is disabled by default (i.e., Windows XP wireless settings are enabled); for CardBus Card users, support for the Harmony Utility is enabled by default (i.e., Windows XP wireless settings are disabled). To turn Harmony Configuration on or off, check or uncheck the box labeled Enabled Harmony Configuration (Disable Windows XP Settings) within the Station Configuration screen. When this option is disabled, the Station Configuration parameters, the Security parameters, and the 802.11a Network screens Transmission Test and Associate features are unavailable within the Harmony Utility (as shown in the example below). Harmony Utility 36 Security Click the Security tab to configure the adapters security settings. From within this screen, you can enable WEP for Authentication and Encryption, enable the Harmony Security Protocol, and configure the adapters WEP Keys. See Security Settings on page 28 for more information on these settings. WEP for Authentication and Encryption Follow these steps to enable WEP for Authentication and Encryption:
1. Select Use WEP for Authentication and Encryption within the Security Level box, shown below. 2. 3. Click Configure WEP Keys. Select a Key Size from the drop-down menu (64 Bit, 128 Bit, or 152 Bit). Harmony Utility 37 4. Enter one to four WEP Keys in the fields provided, as shown in the following example. 5. Use only hexadecimal digits (i.e., 0-9 and A-F). For 64-bit encryption, enter 10 digits for each Key; for 128-bit encryption, enter 26 digits for each Key; for 152-bit encryption, enter 32 digits for each Key. 6. To simplify WEP configuration on other 802.11a devices, click Write Keys to File... to save the WEP Keys you configured in Step #5 to a text file. Later you can upload these Keys from the text files to other 802.11a devices on the network. Note:
If you already have a WEP Key text file that you generated while configuring another 802.11a device, click Read Keys From File... to upload those Keys to the adapter. 7. 8. Click OK to save the WEP Keys. Select one of the Keys you configured as the Default Key. Harmony Utility 38 In the following example, Key 3 is the Default Key. A Harmony 802.11a network adapter can decrypt information that was encrypted with any of its four WEP Keys but it will only use the Default Key to encrypt outgoing information. Click Apply or OK to save the new WEP settings. If you need to change a WEP Key at a later date, click Configure WEP Keys and enter one to four new WEP Keys. Note that any Keys you entered previously will not be visible (stars appear in place of the digits). 9. 10. Harmony Utility 39 Harmony Security Protocol Follow these steps to enable the Harmony Security Protocol:
Note:
The Harmony Security Protocol is not available on computers running Windows 2000 Server. 1. 2. Select Use Harmony Security Protocol within the Security Level box. Place a check mark in the Log on to Harmony Security before Windows Logon box if you want to connect to the wireless network before logging on to the Windows operating system. Note:
You should enable the Log on to Harmony Security before Windows Logon option if your computer connects to a Windows Domain Controller, connects to a Novell network, automatically reconnects to shared network drives dur-
ing Windows logon, or runs networking software (e.g., PC Anywhere) before connecting to the network. 3. 4. Click Apply or OK to save the new security settings. Log off Windows or restart the computer. Harmony Utility 40 5. 6. Log on to Windows when prompted (if the Log on to Harmony Security before Windows Logon option is disabled). The Harmony logon prompt will appear. Enter your Harmony User Name and Password in the fields provided. The Windows 98/ME logon prompt is shown below. Note:
The Harmony logon prompt will not appear if your Windows User Name and Password match your Harmony User Name and Password, you are within range of a properly configured Access Point, and the Log on to Harmony Security before Windows Logon option is disabled. 7. If you are not in range of a Harmony Access Point, place a check mark in the box labeled Defer logon for current session if Access Point is out of range. The Harmony software will store your User Name and Password and automatically initiate the logon procedure without any user intervention once the 802.11a network adapter has associated with an Access Point. Harmony Utility 41 8. If desired, click Change Password (Windows XP/2000 Professional) or Options...
(Windows 98/ME) to modify your Harmony user account. The Windows 98/ME logon prompt is shown below. Enter a new password twice in the fields provided to change your Harmony Password. The Password can be up to 32 characters and is case sensitive. To reset your Harmony Password to match your Windows Password, check the box labeled Synchronize Password with Windows Logon. 9. Click Logon to log on to the Harmony System. 10. Log on to Windows when prompted (if the Log on to Harmony Security before Windows Logon option is enabled). Note:
See Common Technical Support Questions on page 54 for troubleshooting suggestions if you have difficulty logging onto the network. Harmony Utility 42 Network Traffic Statistics Click the Statistics tab to view information about the number of packets sent and received by the adapter, as shown below. The default Statistics screen displays the following statistics:
Unicast Packets Sent:::: This statistic reports the number of packets transmitted by the adapter that were destined for a single network node. Multicast Packets Sent: This statistic reports the number of packets transmitted by the adapter that were destined for more than one network node. Unicast Packets Received: This statistic reports the number of packets received that were destined only for this adapter. Multicast Packets Received:::: This statistic reports the number of packets received that were destined for more than one network node. You can view additional statistics by clicking Advanced Statistics, as shown on the next page. Harmony Utility 43 The advanced Statistics screen displays the following additional statistics:
Send Send Rate: This field reports the adapters current transmit rate. Unicast Bytes Sent: This statistic reports the total number of bytes contained in the unicast packets transmitted by the adapter. Multicast Bytes Sent: This statistic reports the total number of bytes contained in the multicast packets transmitted by the adapter. Single Retries: After the adapter sends a packet, it waits for an acknowledgment from the receiving radio to confirm that the packet was successfully received. If an acknowledgment is not received within a fixed period of time, the adapter will retransmit the packet. This statistic reports the number of packets that required one retry before the adapter received an acknowledgment. Multiple Retries: This statistic reports the number of packets that required more than one retry before the adapter received an acknowledgment. Excessive Retries: This statistic reports the number of packets that were not suc-
cessfully transmitted because the adapter did not receive an acknowledgment within the maximum number of retries. Harmony Utility 44 Last ACK RSSI: This statistic reports the RSSI (Received Signal Strength) for the last acknowledgment (ACK) received by the adapter. RSSI is reported in decibels
(dB) and typically ranges from 0 to 75. In general, an RSSI less than 15 indicates a weak signal and an RSSI greater than 30 indicates a strong signal. ACK Errors: This statistic reports the number of unicast transmit attempts for which no acknowledgement (ACK) was received. CTS Errors: This statistic reports the number of Clear To Send (CTS) errors. When the adapter uses RTS/CTS before transmitting a packet, it first sends a Request to Send (RTS) message to the packets recipient. The packets recipient then returns a CTS message to the adapter. When the adapter receives the CTS, it sends the packet to the recipient. However, if the adapter does not receive a CTS within a fixed period of time, it will resend the RTS. After a fixed number of retries, the adapter will record a CTS Error if a CTS has not been received. Antenna A Success: The adapter provides antenna diversity. This means that it automatically switches between its two antennas (referred to as Antenna A and Antenna B) to provide the strongest possible signal to a receiving radio. This sta-
tistic reports the number of packets successfully transmitted using Antenna A. Antenna B Success: This statistic reports the number of packets successfully transmitted using Antenna B. Receive Receive Rate: This field reports the data rate at which the adapter is currently receiving packets sent by another 802.11a device. Unicast Bytes Received: This statistic reports the total number of bytes contained in the unicast packets received by the adapter. Multicast Bytes Received: This statistic reports the total number of bytes con-
tained in the multicast packets received by the adapter. WEP Undecryptable: This statistic displays the number of packets that were dis-
carded due to a problem during decryption, such as mismatched WEP Keys. Bad Frame Checksum: This statistic displays the number of received packets that failed the CRC (Cyclic Redundancy Check) of the Frame Check Sequence (FCS). Last Frames RSSI: This statistic reports the RSSI (Received Signal Strength) for the last packet received by the adapter. RSSI is reported in decibels (dB) and typ-
ically ranges from 0 to 75. In general, an RSSI less than 15 indicates a weak signal and an RSSI greater than 30 indicates a strong signal. Duplicate Frames: This statistic displays the number of duplicate packets received by the adapter. When the adapter successfully receives a packet, it sends an acknowledgment (ACK) to the transmitting node. If the ACK does not reach the transmitting node within a specified period of time after it sent the packet (due to interference or some other type of delay), it will resend the packet to the recipient. In this case, the adapter then receives the packet a second time, records that it received a duplicate packet, and sends an ACK again. Harmony Utility 45 802.11a Networks Click the 802.11a Networks tab to view the list of Access Points or Ad Hoc stations within range of the adapter. In the example below, the utility detected one Access Point and one Ad Hoc node. To display only Access Points, uncheck the Display Ad Hoc stations box. Note:
The 802.11a Networks screen reports the following information for each Access Point or Ad Hoc node detected by the adapter:
BSSID: This field reports the physical (or MAC) address of the detected Access Point or the Basic Service Set ID of the detected Ad Hoc node. SSID: This field reports the detected devices SSID or Service Set Identifier. See SSID on page 24 for more information. Channel: This field displays the Channel used by the detected device. See Channel on page 26 for more information. Signal Strength: This field displays the strength of the radio signal received from the detected 802.11a device. Harmony Utility 46 If you want the adapter to associate with one of the detected Access Points or join the same Ad Hoc network as one of the detected Ad Hoc nodes, highlight the node within the device list and click Associate. The adapters Network Mode and/or SSID will automatically change to match the selected devices configuration settings. In addition, you can perform a link quality test with any of the detected Access Points by highlighting the Access Point and clicking the Transmission Success Rate button. Note:
A drop-down menu appears when you right-click an entry within the 802.11a Networks list. The menu contains Associate and Transmission Test options. Packet Transmission Success Rate Select one of the detected Access Points in the 802.11a Networks screen and click Transmission Success Rate to determine the link quality between the adapter and the selected device. Note:
The Packet Transmission Success Rate screen displays the Network Name (i.e., SSID) and MAC address of the selected Access Point. The adapter sends a series of packets to the selected device and monitors the number of replies it receives. This information is converted to a percentage and plotted on a graph, as shown in the following example. Performing a Transmission Test will reset the adapters statistics. In addition, the utility displays the current success rate in the Instantaneous Success field and the average success rate (since the beginning of the test) in the Average Success field. Harmony Utility 47 By default, the adapter uses a packet size of 500 Bytes and automatically switches between all rates as necessary during the test (greater range generally means a lower transfer rate). However, you can also specify a transfer rate and/or a packet size
(between 1 and 1500 Bytes) using the drop-down menu. If you change either the Transfer Rate or the packet size, click Apply for these changes to take effect. Click Close to exit the Packet Transmission Success Rate screen. Note:
You can only perform a transmission test with an Access Point; you cannot perform a transmission test with an Ad Hoc node. Version Information Click the About tab to view version information for the 802.11a driver and utility. 48 Chapter 6 Troubleshooting The Harmony 802.11a network adapters are designed to be very easy to install and operate. However, if you experience any difficulties, use the information in this chapter to help diagnose and solve the problem. If you still cannot resolve the problem, contact Proxim Technical Support as described in Appendix B, Technical Support and Training, on page 60. How to Obtain Help with Your LAN Installation If you require assistance to install your LAN, Proxim can put you in touch with an 802.11a reseller in your area. The reseller is an expert in the design, installation, and maintenance of LANs and will be able to examine your needs and recommend the most cost-effective solution for your LAN whether you are installing a new LAN or adding on to an existing one. For the location of the Harmony reseller nearest you, contact Proxim at 1-800-229-1630 or 1-408-731-2700 and ask for the Sales Department. Common Installation Problems Chapter 2 describes how to install a Harmony 802.11a network adapter in a computer running Windows 98 Second Edition (SE), Windows Millennium Edition (ME), Windows 2000, or Windows XP. This section provides suggestions to resolve some of the common installation problems with a Harmony 802.11a network adapter. Adapter Inserted Before Running the Installation Program If you inserted the Harmony 802.11a network adapter into the computer before running the Harmony Installation program, you can install the adapter using Microsofts Add New Hardware Wizard. Troubleshooting 49 Follow these steps:
Note:
PCI Card users should begin at Step #1. CardBus Card users should begin at Step #8. 1. 2. 3. 4. Turn off the computer, unplug its power cord from the wall outlet, and remove the computer cover. Locate an unused PCI slot and refer to your PCs manual for instructions on how to remove the plate that covers the slot (if applicable). Feed the cards antennas through the PCI slot and out the back of the computer. Align the PCI Card over the empty slot and firmly insert the card into the slot, as illustrated below. 5. 6. 7. 8. 9. Secure the cards metal bracket to the computer following the directions provided in your PCs manual and replace the computer cover. Plug the computers power cord back into the wall outlet. Attach the antenna with the longer cable to the antenna base and place the antenna with the longer cable on top of your desk, computer, or monitor. Turn on the computer and logon to Windows, if applicable. CardBus Card users: Insert the 802.11a adapter into an available CardBus slot. 10. Be patient while Windows automatically detects the adapter and launches the Add New Hardware Wizard. Troubleshooting 50 11. Insert the Harmony Installation CD into the computers CD-ROM drive. 12. Follow the on-screen instructions to install the Harmony 802.11a network adapter using the Add New Hardware Wizard. Note:
Windows 98/ME users: Insert the Windows installation CD if prompted. If you do not have a Windows installation CD, see Windows ME and Windows 98 SE Installation CD Requirement on page 13. 13. If prompted, restart the computer and logon to Windows. 14. Run SETUP.EXE from the Harmony Installation CD to launch the Harmony Utility Setup program. 15. Follow the on-screen instructions to install the Harmony Utility. Refer to Chapter 5 beginning on page 30 for information on how to use the Harmony Utility. Adapter Not Listed in Device Manager Follow these steps if you have installed an 802.11a network adapter but it doesnt appear as a network adapter in the Device Manager:
1. Open the Device Manager (located within the Control Panels System icon). Check the Other Devices category for a PCI Ethernet Controller or Ethernet 2. Controller entry. 3. 4. 5. 6. If the entry appears in the Other Devices category, highlight it and click Remove. Close the Device Manager. Shut down the computer and remove the Harmony 802.11a network adapter from the computer. Follow the installation instructions in Chapter 2 to install the Harmony driver and utility. 802.11a Network Adapter Not Installed Properly If the Harmony Device Setup program or Windows Networking reports that the Harmony 802.11a network adapter has not been properly installed or configured after you have completed the Harmony Installation program, open the Device Manager and locate the Harmony 802.11a entry in the Network adapters category. If a yellow exclamation point (!) appears next to the Harmony 802.11a adapters Device Manager entry, then the adapter is not working properly. Follow these steps:
Uninstall the adapter as described in Uninstalling a Harmony 802.11a Network 1. Adapter on page 52. Reinstall the adapter following the installation instructions in Chapter 2. 2. Troubleshooting 51 Configuring Networking Clients and Protocols A Harmony 802.11a network adapter will bind to any existing networking components, such as Client for Microsoft Networks and the Internet Protocol (TCP/IP). Refer to the steps below that correspond to your computers operating system to configure the adapters networking components. Windows XP/2000 Follow these steps to configure a Harmony 802.11a adapters networking clients and protocols in a Windows XP or Windows 2000 computer:
1. Open the Control Panels Network and Dial-up Connections (Windows 2000) or 2. 3. 4. Network Connections (Windows XP) icon. Scroll through the list of network connections and right-click the Local Area Connection that corresponds to the Harmony 802.11a adapter. Select Properties from the drop-down menu to view the connections properties screen. Select a client or protocol from the list of installed components and click Properties to configure its settings. For example, if you want to assign the Harmony 802.11a adapter a static IP address, highlight Internet Protocol (TCP/IP) and click Properties. Note:
To add a new client or protocol, click Install... and follow the on-screen instructions. Windows ME/98 SE Follow these steps to configure a Harmony 802.11a adapters networking clients and protocols in a Windows 98/ME computer:
1. Open the Control Panels Network icon. 2. Select a client or protocol from the list of installed components and click Properties to configure its settings. For example, if you want to assign the Harmony 802.11a adapter a static IP address, highlight TCP/IP or TCP/IP -> Harmony 802.11a Network Adapter and click Properties. Note:
To add a new client or protocol, click Add... and follow the on-screen instructions. Troubleshooting 52 Uninstalling a Harmony 802.11a Network Adapter Follow these steps if you need to uninstall a Harmony 802.11a network adapter:
1. 2. Open the Control Panel and double-click the Add/Remove Programs icon. Right-click the Status Monitor and choose Remove Status Monitor From Task Bar. 3. 4. 5. 6. 7. 8. 9. Select Harmony 802.11a from the list of installed programs and click Add/Remove... (Windows 98/ME) or Change/Remove (Windows XP/2000). Select Automatic from the list of uninstall options and click Next. Click Finish to continue. Click Remove to remove the Harmony 802.11a Network Adapter. Click Close after the Harmony 802.11a Network Adapter has been removed. If prompted, click Cancel to prevent the computer from restarting. Remove the following driver files, if present:
Note:
By default, Windows will hide some of these file types. Confirm that you have configured Windows to show all files before assuming that these files are not present. The Hidden Files option is available under the Folder Options heading of the Windows Explorers View or Tools menu. Windows 98/ME computers:
C:\WINDOWS\INF\NETPR11A.INF C:\WINDOWS\INF\OTHER\PROXIM,INC.NETPR11A.INF C:\WINDOWS\SYSTEM32\DRIVERS\PROX11A.SYS C:\WINDOWS\SYSTEM\PROX11A.SYS Windows 2000 computers:
C:\WINNT\SYSTEM32\DRIVERS\PROX11A.SYS C:\WINNT\INF\NETPR11A.INF C:\WINNT\INF\NETPR11A.PNF Windows XP computers:
C:\WINDOWS\SYSTEM32\DRIVERS\PROX11A.SYS C:\WINDOWS\INF\NETPR11A.INF C:\WINDOWS\INF\NETPR11A.PNF 10. Shut down the computer. 11. Remove the Harmony 802.11a network adapter from the computer. Troubleshooting 53 Range Every environment is unique with different obstacles, barriers, materials, etc., and, therefore, it is difficult to determine the exact range that will be achieved without testing. Radio signals may reflect off of some obstacles or be absorbed by others depending on their construction. The IEEE 802.11a specification supports eight data rates: 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, and 6 Mbps. Harmonys 2X mode supports eight data rates: 108 Mbps, 96 Mbps, 72 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, and 12 Mbps. Operation at 6 Mbps or 12 Mbps provides greater range than operation at 54 Mbps or 108 Mbps. Note:
By default, a Harmony 802.11a network adapter will automatically adjust the data rate to maintain a usable radio connection. Therefore, in 802.11a mode a client that is close to an Access Point may operate at 54 Mbps while a client that is on the fringe of coverage may operate at 6 Mbps. Proper antenna placement can help improve range. Try to keep the adapters antennas free of obstructions (particularly metal objects) and do not place a sheet of metal (like a filing cabinet) between two antennas. Also, Proxim recommends that you use the Harmony Utility to evaluate the signal strength and link quality between 802.11a devices. Products sold in Europe and Japan do not support 2X mode. CardBus Card LED Indicators The Harmony 802.11a CardBus Card includes two green LED indicators on the top of the card near the antenna. These LEDs display the following behavior:
Both LEDs are off when the adapter is not receiving power or when the Harmony driver is not installed. The LEDs blink in an alternating pattern when the adapter is searching for an Access Point (in Infrastructure mode) or Ad Hoc network (in Ad Hoc mode). The LEDs blink in unison every second when the adapter has associated with an Access Point or joined an Ad Hoc network. When there is network activity, the LEDs blink at a faster rate; the LEDs will blink in unison more often as the adapters Send or Receive Rate increases. Troubleshooting 54 Common Technical Support Questions This section discusses some of the most common problems using a Harmony 802.11a network adapter and offers possible solutions. Symptom/Question Possible Solution/Answer I installed the adapter card in the computer before running SETUP.EXE. What should I do?
My office has an existing 802.11b network. Are the Harmony 802.11a adapters compatible?
Follow the on-screen instructions to install the adapter using Microsofts Add New Hardware Wizard. When prompted, point the Wizard to search the Harmony Installation CD for driver files. Then, after you have installed the driver, run SETUP.EXE from the Harmony Installation CD to install the Harmony utility. No. 802.11a devices are not compatible with 802.11b devices. I want to install a Harmony 802.11a network in my office that has an existing 802.11b network. Will the 802.11a network interfere with the 802.11b network?
No. 802.11a and 802.11b devices will not interfere with each other since they operate at different frequencies. 802.11a devices operate in the 5 GHz band, and 802.11b devices operate in the 2.4 GHz band. Is a Harmony 802.11a network adapter compatible with 802.11a products from other vendors?
In throughput tests, the 802.11a network adapter doesnt seem to transfer data as quickly as Id expect. Yes, the Harmony 802.11a adapters are interoperable with 802.11a-compliant products from other vendors. However, if you use 2X mode to achieve data rates up to 108 Mbps, a Harmony 802.11a adapter is only compatible with other 802.11a products from Proxim. Data rate is the raw signaling rate of a networking device; it does not equal data throughput. Actual data throughput is always less than the data rate since some of the available bandwidth is used to send control messages and regulate activity over the wireless medium. Also, throughput will depend on several factors such as network overhead, the file transfer program in use, the computers operating system, and the computers processor speed. Troubleshooting 55 Symptom/Question Possible Solution/Answer How do I determine where to install 802.11a Access Points to ensure that users can access the wireless network from anywhere in my facility?
Ive entered my Harmony User Name and Password but I cant log on to the network. I deferred my Harmony logon until my computer was in range of an Access Point. However, once the 802.11a adapter associated with an Access Point, I could not access the network. Proxim recommends that you perform a site survey following the procedure outlined in Proxims Introduction to Enterprise Wireless Networking and Harmony Technical Training class. If you would like to learn more about the site survey procedure, you should consider signing up for a Proxim Technical Training class in your area. Refer to Proxims Web site at http://training.proxim.com/ for more information. Either your User Name or Password is incorrect or you are not in range of an Access Point. To determine whether or not you are in range of an Access Point, click Cancel to access the Windows desktop and locate the Association State field within the Harmony Utility. Then, log on to Windows again to bring up the Harmony logon prompt. If you are out of range of an Access Point, check the Defer logon for current session if Access Point is out of range box and click Logon. If your User Name or Password is incorrect, contact your network administrator for assistance. Open the Harmony Utilitys Association Information screen and locate the Harmony Security Protocol field. If the field reports User is not authenticated, then either your User Name or Password is incorrect. Try logging on to Windows again. If problems persist, contact your network administrator to confirm your User Name and Password. Troubleshooting 56 Symptom/Question Possible Solution/Answer My Harmony User Name and Password are synchronized with my Windows User Name and Password so the Harmony logon prompt does not appear after I logon to Windows. But now I want to change my Harmony Password. What can I do?
Change your Windows Password; the Harmony logon prompt will reappear after you log on to Windows once your Windows Password and Harmony Password no longer match. Otherwise, contact your network administrator who can change your Password via the Harmony Systems User Database. My computer cant reestablish a network connection when the Harmony Security Protocol is enabled. Do the Harmony adapters support IEEE 802.1X Authentication?
How long will my battery last when using the Harmony 802.11a CardBus Card?
You need to logon to Harmony Security first before logging on to Windows to gain immediate access to network resources. Open the Harmony Utilitys Security screen and place a check mark next to the Log on to Harmony Security before Windows Logon option. Then, save your changes and logon to Windows again. Windows XP provides native support for the IEEE 802.1X standard. Therefore, a Harmony adapter installed in a Windows XP computer supports 802.1X. For more information on Windows XP and 802.1X, refer to Windows XPs on-line Help documentation. Battery life will vary from unit to unit and depends on many factors including battery type, length of battery life without the CardBus Card inserted, and how frequently the CardBus Card transmits and receives data. Frequent network activity will drain the battery faster than if the card were left idle in doze mode. Configuring the CardBus Card to use one of the Power Saving modes will prolong battery life. However, you should perform some tests under normal operating conditions to accurately determine a devices battery life with the 802.11a CardBus Card. 57 Appendix A Technical Specifications The following technical specification is for reference purposes only. Actual products performance and compliance with local telecommunications regulations may vary from country to country. Proxim Corporation will only ship products that are type approved in the destination country. Technical Specifications General Compatibility ...................................Fully interoperable with IEEE 802.11a compliant products in 802.11a mode Warranty ..........................................3-years parts and labor (return to factory) LED Indicators ..................................Two (2) LEDs indicate Power On, Sleep Mode, Transmit Activity, Association and Power Off Network Information Security ...........................................40, 128 & 152-bit Wired Equivalent Privacy (WEP) data encryption; Harmony Security Protocol Network Architecture........................Supports Ad Hoc peer-to-peer networks and communication to wired infrastructure networks via Access Points Installation & Diagnostics ................Complete configuration utility application included; Utilitys site survey tool surveys other wireless units and reports packet throughput;
Desktop icon continuously reports status Operating System Support...............Windows 98SE, 2000, ME, XP Roaming...........................................Seamless among 802.11a compliant access points, including across subnets via Harmony AP Controller 58 Radio Radio Data Rate ...............................54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, 6 Mbps in 802.11a mode;
108 Mbps, 96 Mbps, 72 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps in 2X mode Media Access Protocol......................IEEE 802.11a Frequency Band................................5.15-5.35 GHz U-NII frequency band
(Unlicensed National Information Infrastructure) Radio Type .......................................Orthogonal Frequency Division Multiplexing Modulation ......................................64 QAM, 16 QAM, QPSK, BPSK Channels..........................................Varies by country. See Channel on page 26. Environmental Operating Temperature ....................0C to +60C Storage Temperature........................-65C to 150C Humidity ..........................................5% to 95% non-condensing Physical Bus Interface ...................................32-bit CardBus for Models 8450 & 8455;
PCI (Peripheral Components Interconnect) for Model 8150 CardBus Card Voltage .......................3.3 Volts Weight .............................................1.41 ounces (40 g) 59 Parameters Parameter Range Default Network Mode Ad Hoc*, Infrastructure Infrastructure Power Saving
(Infrastructure only) Off, Normal, Maximum Off 2X Mode*
SSID Enabled, Disabled Up to 32 characters Channel
(Configurable in Ad Hoc mode; assigned by AP in Infrastructure mode) U.S. & Canada: In 802.11a mode:
Channels 36, 40, 44, 48, 52, 56, 60, &
64; in 2X mode: Channels 42, 50, & 58 Europe: Channels 36, 40, 44, 48, 52, 56, 60, & 64 Japan: Channels 34, 38, 42, & 46 Disabled any All selected RTS/CTS Enabled, Disabled RTS/CTS Threshold 1 to 2345 Send Rate Automatic or select one of the following:
54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, and 6 Mbps in 802.11a mode; 108 Mbps, 96 Mbps, 72 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, and 12 Mbps in 2X mode Disabled 1 Automatic
(all rates in 802.11a mode) Security Level No Security, Use WEP for Authentication and Encryption, Use Harmony Security Protocol No Security Key Size 64 Bit, 128 Bit, 152 Bit WEP Keys
(When Security Level is set to Use WEP for Authentication and Encryption) Up to 4 Keys:
10 hexadecimal digits per key for 64 Bit, 26 hexadecimal digits per key for 128 Bit, 32 hexadecimal digits per key for 152 Bit 64 Bit Blank Default Key One of the four configured WEP Keys WEP Key 1
*Ad Hoc mode not available in Europe; 2X mode not available in Europe or Japan. 60 Appendix B Technical Support and Training If you are having a problem using a Harmony 802.11a network adapter and cannot resolve it with the information in Chapter 6, gather the following information and contact Proxim Technical Support:
What kind of network are you using?
What were you doing when the error occurred?
What error message did you see?
Can you reproduce the problem?
What version of the Harmony 802.11a driver are you using?
You can reach Proxim Technical Support by voice, fax, e-mail, or mail:
Tel:
Fax:
Web:
E-mail:
1-800-477-6946 (Toll-free in the U.S. and Canada) 1-408-731-2640 (International) 1-408-731-3676 http://www.proxim.com/
support@proxim.com Proxim Corporation Attn: Technical Support 510 DeGuigne Drive Sunnyvale, CA 94085 In addition, Proxim offers technical training courses across the United States throughout the year that are designed to teach customers how to maximize the benefits of Proxim products. These classes are taught by experienced Proxim Systems Engineers and have a technical focus. For class and registration information, visit Proxims Web site at http://training.proxim.com. 61 Index A ACK Errors ................................................................................... 44 Ad Hoc.................................................................... 17, 19, 24, 33, 59 Add New Hardware Wizard.......................................................... 48, 54 Alternate Installation Instructions ................................................. 4850 Antenna......................................................................... 9, 17, 49, 53 Antenna Diversity .......................................................................... 44 Antenna Success........................................................................... 44 Association Information .............................................................. 3132 Association State ........................................................................... 31 Average Packets/Sec...................................................................... 32 B Bad Frame Checksum ..................................................................... 44 Battery Life .................................................................................. 56 BSSID.......................................................................................... 45 Bus Interface................................................................................ 58 C Certification ................................................................................... 4 Channel ........................................................ 21, 22, 26, 32, 33, 45, 59 Client for Microsoft Networks............................................................. 51 Common Installation Problems .................................................... 4850 Common Technical Support Questions........................................... 5456 Configuration Parameters ...................................................... 2429, 59 Configure WEP Keys ....................................................................... 36 CTS Errors.................................................................................... 44 D Data Rate .......................................................................... 27, 53, 58 Default Key ........................................................................ 28, 37, 59 Defer logon for current session if Access Point is out of range............... 40, 55 Device Manager ............................................................................ 50 Direct Sequence Spread Spectrum ..................................................... 23 Diversity ..................................................................................... 44 Domain Controller ......................................................................... 39 Duplicate Frames........................................................................... 44 62 E 802.11a. See IEEE 802.11a Standard 802.1X. See IEEE 802.1X 802.11a Networks..................................................................... 4547 Ethernet Controller......................................................................... 50 Excessive Retries........................................................................... 43 F FCC......................................................................................... 2, 12 Frequency Band ............................................................................ 58 Frequency Hopping Spread Spectrum ................................................. 23 H Harmony 802.11a Access Point........................................ 8, 2022, 24, 4547 Access Point Controller .................................................... 8, 20, 22 Power System........................................................................... 8 Security Protocol ........................................................... 29, 3941 User Name and Password ........................................... 29, 40, 55, 56 Utility .............................................................................. 3047 Installation Instructions .................................................. 1517 Status Monitor........................................................ 17, 30, 52 I IEEE 802.11a Standard .................................................................... 23 Interoperability .................................................................... 7, 54 IEEE 802.11b Standard ..................................................................... 54 IEEE 802.1X.................................................................................. 56 Industry Canada............................................................................. 13 Infrared....................................................................................... 23 Infrastructure ...................................................... 17, 2022, 24, 33, 59 Installation Instructions .............................................................. 1218 Instantaneous Packets/Sec.............................................................. 32 K Key Size................................................................................. 36, 59 L Last ACK RSSI ............................................................................... 44 Last Frames RSSI .......................................................................... 44 LED Indicators (CardBus Card) ........................................................... 53 Link Quality ............................................................................ 4647 Log on to Harmony Security before Windows Logon ........................... 39, 56 63 M Media Access Protocol.................................................................... 58 Modulation.................................................................................. 58 Multicast Bytes Received................................................................. 44 Multicast Bytes Sent ...................................................................... 43 Multicast Packets Received.............................................................. 42 Multicast Packets Sent.................................................................... 42 Multiple Retries............................................................................. 43 N NETPR11A.CAT................................................................................ 17 NETPR11A.INF ............................................................................... 52 Network Mode ............................................................... 17, 24, 33, 59 Network Name.............................................................................. 46 Network Traffic Statistics ............................................................ 4244 Networking Client Configuration .......................................................................... 51 New Hardware Wizard. See Add New Hardware Wizard Novell Network ............................................................................. 39 O Orthogonal Frequency Division Multiplexing (OFDM) .......................... 23, 58 P Packet Transmission Success Rate................................................ 4647 Password ............................................................................... 29, 40 PC Anywhere ................................................................................ 39 PCI Ethernet Controller.................................................................... 50 Power Saving Mode................................................................... 25, 59 Product Certification......................................................................... 4 Product Package ............................................................................. 9 Protocol Configuration .......................................................................... 51 PROX11A.SYS............................................................................ 17, 52 R Range.......................................................................................... 53 Read Keys From File ........................................................................ 37 Receive Rate ................................................................................ 44 Regulatory Information and Warnings .......................................... 24, 12 Roaming ........................................................................... 2122, 25 RSSI........................................................................................... 44 See also Signal Strength RTS/CTS............................................................................ 27, 33, 59 64 S Security Settings ...................................................................... 2829 Configuration .................................................................... 3641 Send Rate..................................................................... 27, 33, 43, 59 SETUP.EXE.......................................................................... 15, 50, 54 Signal Strength........................................................................ 32, 45 See also RSSI Single Retries ............................................................................... 43 Site Survey ................................................................................... 55 Spread Spectrum .......................................................................... 23 SSID ................................................................. 21, 22, 24, 33, 45, 59 Station Address ............................................................................ 32 Station Configuration ................................................................ 3335 Statistics. See Network Traffic Statistics Status Monitor.................................................................... 17, 30, 52 Synchronize Password with Windows Logon .......................................... 41 System Requirements...................................................................... 10 T TCP/IP ......................................................................................... 51 Technical Support.......................................................................... 60 Technical Training.......................................................................... 60 Temperature Operating.............................................................................. 58 Throughput................................................................................... 54 Topologies.............................................................................. 1922 Transmit Rate. See Send Rate Troubleshooting Suggestions ...................................................... 4856 2X Mode ...................................................................... 23, 25, 54, 59 U Unicast Bytes Received ................................................................... 44 Unicast Bytes Sent......................................................................... 43 Unicast Packets Received ................................................................ 42 Unicast Packets Sent...................................................................... 42 Uninstall Instructions ..................................................................... 52 Use Harmony Security Protocol .................................................... 29, 59 Use WEP for Authentication and Encryption ........................... 28, 3638, 59 User Database......................................................................... 29, 56 User Name.............................................................................. 29, 40 65 V Version Information ....................................................................... 47 Voltage....................................................................................... 58 W Warranty Information........................................................................ 2 WEP (Wired Equivalent Privacy) ............................................... 28, 3638 WEP Key....................................................................... 28, 3738, 59 WEP Undecryptable........................................................................ 44 Windows 2000 .............................................................................. 10 Server ............................................................................. 29, 39 Windows 98/ME............................................................................. 10 Cabinet (CAB) Files ................................................................... 13 Installation CD............................................................... 13, 17, 50 Windows XP .................................................................................. 10 Disable Harmony Configuration.................................................... 35 Wireless Topologies .................................................................. 1922 Write Keys to File............................................................................ 37
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2002-12-06 | 5725 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
2 | 2002-08-21 | 5745 ~ 5825 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2002-12-06
|
||||
1 2 |
2002-08-21
|
|||||
1 2 | Applicant's complete, legal business name |
Proxim Inc
|
||||
1 2 | FCC Registration Number (FRN) |
0005878202
|
||||
1 2 | Physical Address |
510 DeGuigne Drive
|
||||
1 2 |
Sunnyvale, California 94086
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
n/a | ||||||
app s | FCC ID | |||||
1 2 | Grantee Code |
IMK
|
||||
1 2 | Equipment Product Code |
8455
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
K****** G********
|
||||
1 2 | Title |
Vice President
|
||||
1 2 | Telephone Number |
408-7********
|
||||
1 2 | Fax Number |
408-7********
|
||||
1 2 |
k******@proxim.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
COMPLIANCE CERTIFICATION SERVICES
|
||||
1 2 | Name |
S******** C********
|
||||
1 2 | Physical Address |
561 F MONTEREY RD
|
||||
1 2 |
561 F MONTEREY RD.
|
|||||
1 2 |
MORGAN HILL, California 95037
|
|||||
1 2 |
MORGAN HILL, California 9503
|
|||||
1 2 |
United States
|
|||||
1 2 | Telephone Number |
40846******** Extension:
|
||||
1 2 | Fax Number |
40846********
|
||||
1 2 |
S******@CCSEMC.COM
|
|||||
app s | Non Technical Contact | |||||
1 2 | Firm Name |
COMPLIANCE CERTIFICATION SERVICES
|
||||
1 2 | Name |
C**** V******
|
||||
1 2 | Physical Address |
561 F MONTEREY RD
|
||||
1 2 |
561 F MONTEREY RD.
|
|||||
1 2 |
MORGAN HILL, California 95037
|
|||||
1 2 |
United States
|
|||||
1 2 | Telephone Number |
40846******** Extension:
|
||||
1 2 |
40846******** Extension:
|
|||||
1 2 | Fax Number |
40846********
|
||||
1 2 |
40846********
|
|||||
1 2 |
C******@CCSEMC.COM
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 2 | DTS - Digital Transmission System | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11a Cardbus | ||||
1 2 | 802.11a WIRELESS LAN CARDBUS CARD | |||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | This application was originally granted on 08/21/2002. | ||||
1 2 | Output power is conducted. Device is approved for mobile and laptop computer use with similar installation and operating configurations as tested in this filing only. Device with specific antenna has been tested stand-alone for SAR compliance in a typical laptop computer with side PCMCIA slot, as described in this filing. Device has not been tested in a host product for RF exposure compliance in combination with other transmitters. Users and installers must be informed of the installation and operating requirements and configurations for satisfying RF exposure compliance. The highest reported SAR value is 0.78 W/kg. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Compliance Certification Services Inc
|
||||
1 2 | Name |
S**** C******
|
||||
1 2 | Telephone Number |
408-4******** Extension:
|
||||
1 2 | Fax Number |
408-4********
|
||||
1 2 |
s******@ccemc.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | 5150 | 5250 | 0.046 | ||||||||||||||||||||||||||||||||||||
1 | 2 | 15E | 5725 | 5825 | 0.1 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 5745.00000000 | 5825.00000000 | 0.0970000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC