FCC ID: HZB-USB9100 ORiNOCO 802.11 a/b/g/n/ac USB Adapter

ORiNOCO USB-9100 802.11a/b/g/n/ac Adapter ORiNOCO USB-9100 802.11a/b/g/n/ac Adapter User Guide Copyright 2010 Proxim Wireless Corporation. All rights reserved. Covered by one or more of the following U.S. patents: 5,231,634; 5,875,179; 6,006,090;

5,809,060; 6,075,812; 5,077,753. This manual and the software described herein are copyrighted with all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of Proxim Wireless Corporation. Trademarks ORiNOCO and Proxim are registered trademarks, and the Proxim logo is a trademark, of Proxim Wireless Corporation. All other trademarks mentioned herein are the property of their respective owners. Disclaimer Proxim reserves the right to revise this publication and to make changes in the content from time-to-time without obligation on the part of Proxim to provide notification of such revision or change. Proxim may make improvements or changes in the product(s) described in this manual at any time. When using this device, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons. Proxim recommends you to visit its support site at http://my.proxim.com for Regulatory Information and latest product updates. IMPORTANT!

ORiNOCO USB-9100802.11a/b/g/n/ac Adapter User Guide Version 1.4 P/N 75384, February 2015 2 ORiNOCO USB-9100 802.11a/b/g/n/ac Adapter User Guide 1 Introduction. 5 Overview . 5 Product Features . 5 System Requirements . 5 2 Installation. 7 Product Package . 7 Installation Procedure for ORiNOCO USB-9100 . 7 Wi-Fi Protected Setup (WPS) . 10 LED Behavior . 10 Windows Zero Configuration Tool . 10 Windows 7 . 10 View and connect to available wireless network. 11 Manually create a network profile . 11 Windows 8 . 11 Join a network. 11 Manually create a network profile or connect to a hidden network . 12 A Specifications . 13 ORiNOCO USB-9100 Specifications . 13 B Safety and Regulatory Information. 15 U.S. Federal Communications Commission (FCC) Statements . 15 Country Code Statement . 15 FCC Interference Statement . 15 FCC Radiation Exposure Statement . 15 Canada IC Statements . 16 IC Country Code Statement . 16 IC Radiation Exposure Statement . 16 European Community Countries Regulatory Statements . 17 2.4 GHz Operation . 17 5 GHz Operation . 17

. 17 C Glossary . 18 D Technical Services and Support . 20 Obtaining Technical Service and Support . 20 Support Options . 20 Proxim eService Web Site Support . 20

. 20 Telephone Support . 21 3 ORiNOCO USB-9100 802.11a/b/g/n/ac Adapter User Guide ServPak Support . 21 4 ORiNOCO USB-9100 802.11a/b/g/n/ac Adapter User Guide 1 Introduction Overview The ORiNOCO USB-9100 802.11a/b/g/n/ac Adapter is the next generation Wireless USB Adapter capable of supporting 5 GHz bands. It provides high-speed (up to 300/ 867 Mbps) wireless access and networking for a USB-enabled desktop and laptop anywhere, anytime. It is compatible with next generation WiFi devices and backward compatible with 802.11 b/g/n

+AC devices.The USB Adapter is a Plug-and-Play device that connects to and draws power from a computers USB port. This ORiNOCO USB-9100 is compatible with a USB 2.0/3.0 slot from any manufacturer. As a Plug-and-Play device, Windows 7/Windows 8 automatically detects the wireless USB Client Adapter and initiates the installation process. Upon successful installation, the wireless USB Adapter communicates seamlessly with other IEEE 802.11ac wireless products as well as legacy products. The ORiNOCO USB-9100 can be used with other 802.11ac devices to form a stand-alone wireless Peer-to-Peer Group or used in conjunction with an Access Point infrastructure to provide mobile clients with wireless access. Product Features The ORiNOCO USB-9100 provides the following features:

USB 2.0/3.0 interface Configurable 802.11a/b/g/n/ac mode support 2x2 MIMO configurations 802.11ac MIMO solution for 5G band 802.11n MIMO solution for 2.4GHz and 5Ghz band Maximum PHY data rate up to 173.3 Mbps using 20MHz bandwidth, 400Mbps using 40MHz bandwidth and 866.7Mpbs using 80MHz bandwidth IEEE 802.11a/b/g/n/ac draft 2.0 compatible WLAN IEEE 802.11e QoS Enhancement (WMM) IEEE 802.11i (WPA,WPA2), open, shared key, and pair-wise key authentication services IEEE 802.11h TPC, Spectrum Measurement IEEE 802.11k Radio Resource Measurement Backward compatible with 802.11a/b/g devices while operating at 802.11n data rates Backward compatible with 802.11a/n devices while operating at 802.11ac data rates WAPI (Wireless Authentication Privacy Infrastructure) certified QoS Provides seamless connectivity to existing Ethernet networks Eliminates the hassle and cost of cabling. Supports an easy Plug-and-Play installation System Requirements You must have the following minimum requirements for using an ORiNOCO USB-9100:

1. A computer that meets the following specifications:

Windows 7/Windows 8 installed Equipped with a USB 2.0/3.0 port At least 64 MB of free hard disk space At least 128 MB of RAM (recommended) 5 Introduction ORiNOCO USB-9100 802.11a/b/g/n/ac Adapter User Guide A 300 MHz processor or higher At least one IEEE 802.11 compliant Access Point 2. 3. If your wireless network uses EAP-TLS or PEAP authentication, the system must contain a Certificate Authority (CA) and user certificates for EAP-TLS authentication or CA certificate for PEAP authentication If your wireless network uses PEAP (EAP-GTC) authentication with a One-Time Password (OTP) user database, you need a hardware token device and your hardware or software token password If PSK key authentication is used, you must know the key information In case the USB port is not exposed outside, it is advised to use a USB cable to ensure higher signal strength. 4. 5. 6. The following information from your system administrator:

The logical name for your workstation (also known as client name). The protocols necessary to bind to the client adapter, such as TCP/IP. The case-sensitive service set identifier (SSID) for your RF network. If your network setup does not include a DHCP server, the IP address, subnet mask, and default gateway address of your computer. The Wired Equivalent Privacy (WEP) keys of the access points with which your client adapter will communicate, if your wireless network uses static WEP for security. The username and password for your network account. 6 ORiNOCO USB-9100 802.11a/b/g/n/ac Adapter User Guide 2 Installation This chapter describes the steps required to install the ORiNOCO USB-9100. IMPORTANT!

For the latest product updates, we recommend you to visit Proxim support site at http://my.proxim.com. Product Package The Product Package includes the following items. If any of the items are missing or damaged, please contact your local reseller. Component ORiNOCO USB-9100 with cap Image Quick Installation Guide Installation Procedure for ORiNOCO USB-9100 This section provides information on how to install the ORiNOCO USB-9100 for Windows 7/Window 8. 1. To install the device driver, please visit the below mentioned location:

https://my.proxim.com/article/3027 2. Based on your system specification, select the .exe file (Win7-32bit.exe/Win7-64bit.exe/Win8.1-32bit.exe/

Win8.1-64bit.exe) and double-click to manually run it. 7 Installation ORiNOCO USB-9100 802.11a/b/g/n/ac Adapter User Guide 3. The Proxim Wireless 11AC Driver Installer Wizard screen will take you through the step-by-step procedure to install the driver. Click Next to continue. 4. Please read the End User License Agreement section and if you agree to the license terms, select I agree option. Click Next to continue. 8 Installation ORiNOCO USB-9100 802.11a/b/g/n/ac Adapter User Guide 5. On successful installation of the device driver, Click Finish to complete the process. 6. Insert the USB Adapter in to USB 2.0/3.0 port of your computer. The system will now automatically detect the new hardware. 9 Installation ORiNOCO USB-9100 802.11a/b/g/n/ac Adapter User Guide 7. Run the Microsoft Wireless Zero Configuration (WZC) tool. Please refer Windows Zero Configuration Tool section for a detailed description on how to connect to a wireless network in Windows 7 and Windows 8. 8. Upon successful configuration of WZC tool, the device is ready to connect to the network. NOTE: The country code selection is for non-US models only and is not available for all US models. Per FCC regulations, all WiFi products marketed in the US must be fixed to US operation channels only. Wi-Fi Protected Setup (WPS) Wi-Fi Protected Setup enables you to easily secure Wi-Fi network in small spaces. In order to enable data encryption to secure your system from possible external threats, simply push the Push Configuration Button (PBC) on the USB Adapter and then the physical button on your Access Point (AP) or the software based button on the WPS configuration page. LED Behavior Figure 2-1 ORiNOCO USB-9100 Adapter LED Behavior Status Slow blink (1 blink per second) Normal blink (2 blinks per second) Wi-Fi Protected Setup (WPS) Fast blink (3 blinks per second) Standby (No connection to AP) Transmission (Tx)/ Reception (Rx) Windows Zero Configuration Tool In this section let us see how to configure a wireless network in Windows 7 and Window 8. Windows 7 You can connect to a wireless network in two ways: View and connect to available wireless network (or) Manually create a network profile. 10 Installation ORiNOCO USB-9100 802.11a/b/g/n/ac Adapter User Guide View and connect to available wireless network Click the network icon in the notification area. In the list of available networks, select the network you want to connect to, and then click Connect. You may be required to enter a security network key/ a pass word to connect to the network. Manually create a network profile In this method, in order to connect to a wireless network, you need to first create a network profile. Click Start, navigate to Control Panel > Networking and Sharing Center > Manage wireless networks. Click the Add button and then select Manually create a network profile option. The following screen appears:

In the above screen, type the name of the access point/ SSID in the Network name field, select the appropriate Security type from drop-down menu, and then type the Security Key. Click Next and when you are finished, click Close. Windows 8 You can connect to a wireless network in two ways: Join a network (or) Manually create a network profile or connect to a hidden network. Join a network Open the Charms bar (press Windows key + C or move your cursor to the lower right corner of the screen) and select Settings. Click Available or the network icon to list the available wireless networks. 11 Installation ORiNOCO USB-9100 802.11a/b/g/n/ac Adapter User Guide Select the network you want to connect to, and then click Connect. Manually create a network profile or connect to a hidden network Press the Windows Logo + X from the Start screen and then select Control Panel from the menu. Navigate to Network and Internet > Network and Sharing Center and then click the Set up a new connection or network. From the list, Select Manually connect to a wireless network and click Next. The following dialog box as shown in the figure below will appear. In the above screen, type the name of the access point/ SSID in the Network name field, select the appropriate Security type from drop-down menu, and then type the Security Key; Click Next to add the network profile. If you have to make a change, you can easily do so at the last step. Click Close when you are finished. 12 ORiNOCO USB-9100 802.11a/b/g/n/ac Adapter User Guide A Specifications ORiNOCO USB-9100 Specifications Chipset RTL8812AU Host Interface Complies with USB Revision 3.0 Radio Antenna Operating Data Rate Modulation Transmit Power Receive Sensitivity Power Consumption 2 Internal Printed Antennas 2.412 - 2.484GHz(Subject to Local Regulations) 5.15 - 5.35 GHz, 5.47 - 5.825 GHz 802.11b: 1, 2, 5.5, 11Mbps 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11n: up to 300Mbps 802.11ac: up to 867Mbps 802.11b: DSSS(DBPSK, DQPSK, CCK) 802.11a/g: OFDM(BPSK, QPSK, 16-QAM, 64-QAM) 802.11n: OFDM(BPSK, QPSK, 16-QAM, 64-QAM) 802.11ac: OFDM(BPSK, QPSK, 16-QAM, 64-QAM,256-QAM) 802.11a/g: 14 +/-1.5dBm@54Mbps 802.11b: 17+/-1.5dBm@11Mbps 802.11gn HT20: 14+/-1.5dBm@MCS7 802.11gn HT40: 14+/-1.5dBm@MCS7 802.11ac HT20: 12+/-1.5dBm@MCS8 802.11ac HT40: 12+/-1.5dBm@MCS9 802.11ac HT80: 12+/-1.5dBm@MCS9 CE/TELEC 802.11an HT20: 14+/-1.5dBm@MCS7 802.11an HT40: 14+/-1.5dBm@MCS7 FCC 802.11an HT20: 13+/-1.5dBm@MCS7 802.11an HT40: 12+/-1.5dBm@MCS7 802.11b: -72dBm+/-2dBm@11Mbps 802.11a/g: -65dBm+/-2dBm@54Mbps 802.11n: -64dBm+/-2dBm @HT20 MCS7 802.11n: -61dBm+/-2dBm @HT40 MCS7 802.11ac: -57dBm+/-2dBm @HT20 MCS8 802.11ac: -54dBm+/-2dBm @HT40 MCS9 802.11ac: -51dBm+/-2dBm @HT80 MCS9 Standby: 173mA / 5V (Max) Full load: 426mA / 5V (Max) 13 Specifications ORiNOCO USB-9100 802.11a/b/g/n/ac Adapter User Guide Environmental Operating Storage Operating Voltage Physical Specification Housing / Weight 0~400C. 20% to 90% Non-Condensing

-30 ~ 700C. 20% to 95% Non-Condensing 5V +/-5%

14.6g/+-0.2g 14 Safety and Regulatory Information ORiNOCO USB-9100 802.11a/b/g/n/ac Adapter User Guide B Proxim recommends you to visit the Proxim Support site at http://my.proxim.com IMPORTANT!

for Regulatory Information and latest product updates. U.S. Federal Communications Commission (FCC) Statements Country Code Statement For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. Increase the separation between the equipment and receiver. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference 2. This device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. FCC Radiation Exposure Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C. This equipment should be installed and operated with minimum distance 0.5 cm between the radiator & your body. 15 Safety and Regulatory Information ORiNOCO USB-9100 802.11a/b/g/n/ac Adapter User Guide Canada IC Statements This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B conforme la norme NMB-003 du Canada. Operation is subject to the following two conditions:

1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. IC Country Code Statement For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology. This device is operating in 5.15~5.25GHz frequency range in indoor environment only. The maximum antenna gain permitted (for devices in the bands 5250-5350 MHz and 5470-5725 MHz) to comply with the e.i.r.p. limit. The maximum antenna gain permitted (for devices in the band 5725-5825 MHz) to comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate, as stated in section A9.2(3). High-power radars are allocated as primary users (meaning they have priority) of the bands 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices. IC Radiation Exposure Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528. This equipment should be installed and operated with minimum distance 0.5cm between the radiator & your body. 16 Safety and Regulatory Information ORiNOCO USB-9100 802.11a/b/g/n/ac Adapter User Guide European Community Countries Regulatory Statements Hereby, Proxim Wireless Corporation, declares that this device is in compliance with the essential requirement and other relevant provisions of the R&TTE Directive 1999/5/EC. This device will be sold in the following EEA countries: Austria, Italy, Belgium, Liechtenstein, Denmark, Luxembourg, Finland, Netherlands, France, Norway, Germany, Portugal, Greece, Spain, Iceland, Sweden, Ireland, United Kingdom, Cyprus, Czech Republic, Estonia, Hungary, Latvia, Lithuania, Malta, Slovakia, Poland, Slovenia Bulgaria, Romania. 2.4 GHz Operation This device may be operated indoors in all EU and EFTA countries using the 2.4 GHz band (Channels 1-13). 5 GHz Operation This device requires the user or installer to properly enter the current country of operation in the 5 GHz Radio Configuration Window as described in the User Guide, before operating the device. This device will automatically limit the allowable channels determined by the current country of operation. Incorrectly entering the country of operation may result in illegal operation and may cause harmful interference to other systems. The user is obligated to ensure the device is operating according to the channel limitations, indoor/outdoor restrictions. This device is restricted to indoor use when operated in EU and EFTA countries using the 5.15-5.35 GHz band (Channels 36, 40 44, 48, 52, 56, 60, and 64). 17 Glossary OCU Access Point Ad-Hoc Backbone BSS CCKM Control Channel ESS ESSID Ethernet Infrastructure MFP Notification Area Roaming ORiNOCO USB-9100 802.11a/b/g/n/ac Adapter User Guide C ORiNOCO Client Utility is the utility that configures the ORiNOCO Wireless Client. An inter-networking device that seamlessly connects wired and wireless networks together. A peer-to-peer wireless network without Access Point. A group of wireless clients consistent an independent wireless LAN. The core infrastructure of a network, the portion of the network that transports information from one central location to another central location. The information is then off-loaded onto a local system. Basic Service Set. An Access Point associated with several wireless stations. Cisco Centralized Key Management. Using CCKM, an AP configured to provide Wireless Domain Services (WDS) takes the place of the RADIUS server and authenticates the client without perceptible delay in voice or other time sensitive applications. Control channel is a central channel that controls other constituent radio by handling data streams. It is often used in the context of a trunked radio system, where the control channel sends data which coordinates users in talkgroups. Extended Service Set. More than one BSS can be configured as an Extended Service Set. An ESS is basically a roaming domain. Extended Service Set Identifier. The length of the ESSID information is between 0 and 32 octets. A 0 length identifier indicates the broadcast SSID. A popular local area data communication network, originally developed by Xerox Corp., which accepts transmission from computers and terminals. Ethernet operates on 10/100 Mbps transmission rate over shielded coaxial cable or over shielded twisted pair telephone wire. An integrated wireless and wired LAN is called an infrastructure configuration. Management Frame Protection. MFP enables authentication of all 802.11 management frames between the WLC and wireless Access Points. MFP protects against direct and man-in-the-middle attacks. It also detects and reports potential phishing attacks. MFP has three main functions, such as frame protection, frame validation and event reporting. You can selectively disable/enable MFP on specific wireless access points or WLANs. The area on the right side of the taskbar. The clock and system notification area appear here. A function that allows one to travel with a mobile end system (wireless LAN mobile station, for example) through the territory of a domain (an ESS, for example) while continuously connecting to the infrastructure. 18 Glossary SSID WEP ORiNOCO USB-9100 802.11a/b/g/n/ac Adapter User Guide Service Set Identifier is a network name used by the Wireless LAN. The length of SSID information is between 0 and 32 octets. Wired Equivalent privacy is the optional cryptographic confidentiality algorithm specified by IEEE 802.11 used to provide data confidentiality that is subjectively equivalent to the confidentiality of a wired local area network (LAN) medium that does not employ cryptographic techniques to enhance privacy. 19 ORiNOCO USB-9100 802.11a/b/g/n/ac Adapter User Guide D Technical Services and Support Obtaining Technical Service and Support If you are having trouble utilizing your Proxim product, please review this manual and the additional documentation provided with your product. If you require additional support to resolve your issue, please be ready to provide the following information before you contact Proxims Technical Services:

Product information:

Part number of suspected faulty unit Serial number of suspected faulty unit Trouble/error information:

Trouble/symptom being experienced Activities completed to confirm fault Network information (what kind of network are you using?) Circumstances that preceded or led up to the error Message or alarms viewed Steps taken to reproduce the problem ServPak information (if a Servpak customer):

ServPak account number Registration information:

If the product is not registered, date when you purchased the product If the product is not registered, location where you purchased the product NOTE: Technical Support is free for the first 90 days from the date of purchase. If you would like to register your product now, visit the Proxim eService Web Site at http://my.proxim.com and click on New Product Registration. Support Options Proxim eService Web Site Support The Proxim eService Web site is available 7x24x365 at http://my.proxim.com On the Proxim eService Web Site, you can access the following services:

New Product Registration: Register your product to gain access to technical updates, software downloads, and free technical support for the first 90 days from receipt of hardware purchase. Open a Ticket or RMA: Open a ticket or RMA Search Knowledge base: Locate white papers, software upgrades, and technical information. ServPak Support: Learn more about Proxims ServPak global support service options. Your Stuff: Track status of your tickets or RMAs and receive product update notifications. Provide Feedback: Submit suggestions or other types of feedback. Customer Survey: Submit an On-Line Customer Survey response. 20 Technical Services and Support ORiNOCO USB-9100 802.11a/b/g/n/ac Adapter User Guide Telephone Support Given below are the Proxims technical support contact details. USA & Canada Customers Call Technical Support: Phone: +1 866-674-6626 Hours: 6:00 AM to 6:00 P.M. Monday - Friday, Pacific Time International Customers Call Technical Support: Phone: +1 408-383-7700 Hours: 6:00 AM to 6:00 P.M. Monday - Friday, Pacific Time ServPak Support To provide even greater investment protection, Proxim Wireless offers a cost effective support program called ServPak. ServPak is a program of enhanced service support options that can be purchased as a bundle or individually, tailored to meet your specific needs. Whether your requirement is around the clock technical support or advance replacement service, we are confident that the level of support provided in every service in our portfolio will exceed your expectations. Advanced Replacement of Hardware: Can you afford to be down in the event of a hardware failure? Our guaranteed turnaround time for return to factory repair is 30 days or less. Those customers who purchase this service are entitled to advance replacement of refurbished or new hardware guaranteed to be shipped out by the Next Business Day. Hardware is shipped Monday Friday, 8:00AM 2:00PM (PST). Extended Warranty: Extend the life of your networking investment by adding 1, 2, or 3 years to your products standard warranty. This service coverage provides unlimited repair of your Proxim hardware for the life of the service contract. The cost of an extended warranty is far less than the cost of a repair providing a sensible return on your investment. 7x24x365 Technical Support: This service provides unlimited, direct access to Proxims world-class Tier 3 technical support engineers 24 hours a day, 7 days a week, 365 days a year including Holidays. Customers who purchase this service can rest assured that their call for technical assistance will be answered and a case opened immediately to document the problem, trouble shoot, identify the solution and resolve the incident in a timely manner or refer to an escalation manager for closure. 8x5 Technical Support: This service provides unlimited, direct access to Proxims world-class technical support 8 hours a day, 5 days a week from 8:00AM - 5:00PM {P.S.T (U.S.)}. Technical Support is available at no charge for the first 30 days from the purchase date. Beyond this period, a ServPak support agreement will be required for technical support. Self-help will be made available by accessing Proxims extensive eService knowledgebase. Software Maintenance: It's important to maintain and enhance security and performance of wireless equipment and Proxim makes this easy by providing a Software Maintenance program that enables customers to access new feature and functionality rich software upgrades and updates. Customers will also have full access to Proxim's vast knowledgebase of technical bulletins, white papers and troubleshooting documents. Priority Queuing Phone Support: This service provides customers with a one hour response time for technical phone support. There is no waiting in line for those urgent calls for technical support. 21 Technical Services and Support ORiNOCO USB-9100 802.11a/b/g/n/ac Adapter User Guide To purchase ServPak support services, please contact your authorized Proxim distributor. To receive more information or for questions on any of the available ServPak support options, please call Proxim Support at 408-383-7700 or send an email to servpak@proxim.com. 22