Document:
EZ-ELD PRODUCT MANUAL Page 1 of 14 Date:
24 Jan 2017 PRODUCT MANUAL EZ-ELD Document:
EZ-ELD PRODUCT MANUAL Page 2 of 14 Date:
24 Jan 2017 Summary 1 Compliance Statement ....................................................................................................................... 3 2 Kit contents ......................................................................................................................................... 3 3 Connector options .............................................................................................................................. 4 3.1 Remove the 9 pin connector ...................................................................................................... 5 3.2 Insert the new connector ........................................................................................................... 6 3.3 Wire extender (installation on site with little space) ................................................................. 8 Installation Instructions: ................................................................................................................... 11 4 5 Led and Sound patterns .................................................................................................................... 13 6 Download the EZ-ELD App ............................................................................................................. 14 7 Resetting the Dongle or Factory Reset the Dongle ........................................................................... 14 8 Electrical Characteristics ................................................................................................................... 14 8.1 Power Supply ............................................................................................................................ 14 8.2 Bluetooth Chipset ..................................................................................................................... 14 8.3 GNSS Receiver .......................................................................................................................... 14 Document:
EZ-ELD PRODUCT MANUAL 1 Compliance Statement Page 3 of 14 Date:
24 Jan 2017 This device has:
FCC ID: 2AKA8-ELD100A0 IC:
22098-ELD100A0 Model: ELD1.0 PMN:
EZ-ELD This equipment complies with Industry Canada and FCC radiation exposure limits set forth for an uncontrolled environment. FCC Caution:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. 2. this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RSS-Gen & RSS-247 statement:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
this device may not cause interference, and this device must accept any interference, including interference that may cause undesired operation of the device. 1. 2. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
1. 2. l'appareil ne doit pas produire de brouillage, et l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. RSS-102 Statement:
This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment. Cet quipement est conforme l'exposition aux rayonnements Industry Canada limites tablies pour un environnement non contrl. 2 Kit contents 4 OBD Connectors Extension Cable
-
-
- Quick Start Guide
-
- Driver User Manual
-
-
- Double Sided Tape 2 QR Code Labels 2 Vehicle Stickers Product Manual Document:
EZ-ELD PRODUCT MANUAL Page 4 of 14 Date:
24 Jan 2017 3 Connector options The EZ-ELD is shipped with the 9-pin connector already fitted. However, it also has 3 other connector options (6-pin, OBDII Light and Medium Duty Vehicles and OBII Volvo/Mack):
9P Connector OBII Volvo/Mack Connector OBDII Light and Medium Duty Vehicles Connector 6P Connector ELD Dongle with 9P Connector
(Same for 6P Connector) ELD Dongle with OBDII Volvo/Mack Connector
(Same for OBDII Light and Medium Duty Vehicles Connector) Document:
EZ-ELD PRODUCT MANUAL Page 5 of 14 Date:
24 Jan 2017 9P CONNECTOR ELD MAIN MODULE for Dongle Configuration
(Same for 6P Connector) 3.1 Remove the 9 pin connector To change the connector type follow the guidelines of the item below. Pull the rubber on both sides ELD Dongle with OBDII Volvo/Mack Connector
(Same for OBDII Light and Medium Duty Vehicles Connector) This lock must be leveraged to outside Document:
EZ-ELD PRODUCT MANUAL Page 6 of 14 Date:
24 Jan 2017 Insert a "key" in the crack and make a lever to the inside of the module. Do one side at a time. Side 1 unlocked Part 1 and 2 are unlocked. Unplug the white connector 3.2 Insert the new connector Plug the white connector on the module. Attention to the correct position Document:
EZ-ELD PRODUCT MANUAL Page 7 of 14 Date:
24 Jan 2017 Rotate the connector so that the wires wrapping, thus improving the accommodation Position the connector on the module and press it until you hear two clicks In accordance with the need the connector can be mounted in one of two ways, rotated 180. Document:
EZ-ELD PRODUCT MANUAL Page 8 of 14 Date:
24 Jan 2017 Wire extender Double side ELD main module Cover adapter extender whip 3.3 Wire extender (installation on site with little space) connector side Bottom Cover Top Cover The Top Cover is used in the ELD main module and the Bottom Cover is used in the OBDII connector. You can also use the 6 and 9 pins. Remove the cover by following the same steps to unplug the connector of the module Connect the end of the harness with female connector on the lower cover. Wrap the wires for easy assembly in module ELD Document:
EZ-ELD PRODUCT MANUAL Page 9 of 14 Date:
24 Jan 2017 Connect the end of the harness with plug connector on the top cover. ELD module OBDII connector. You can also use the 6 and 9 pins. Wrap the wires to facilitate assembly connector Bottom Cover Cover Plug the white connector on the module to the correct position Position the connector on the module and press it until you hear two clicks In accordance with the need the connector can be mounted in one of two ways, rotated 180. Document:
EZ-ELD PRODUCT MANUAL Page 10 of 14 Date:
24 Jan 2017 Plug the connector of the wire at connector OBDII. Attention to the correct position Position the connector on the top cover and press it until you hear two clicks ELD module with extensor harness Bond the double-sided tape on the module for mounting the same Document:
EZ-ELD PRODUCT MANUAL Installation Instructions:
4 Page 11 of 14 Date:
24 Jan 2017 1. Locate the trucks diagnostic port of the vehicle. Depending on the make and model, it may or may not be easy to locate. There are several locations to find the diagnostic port:
o Under the dash or under the steering column/wheel on the left or right, o On the left or right of the pedals, above the pedals. o Above the footrest o o Near the hand break, near the clutch pedal handbrake. o In the fuses box In some cases you will also need to remove a plastic cover to find the connector. Heavy Duty Vehicles Deutsch 6-pin connector Deutsch 9-pin connector Light and Medium duty vehicles OBDII Volvo/Mack Connector OBDII Light and Medium Duty Vehicles Connector Document:
EZ-ELD PRODUCT MANUAL Page 12 of 14 Date:
24 Jan 2017 2. Attach the dongle to the vehicles diagnostic port. Rotate the collar to align the collar tabs with the matching slot on the diagnostic port, press firmly until the adapter cable is fully connected, then rotate the collar clockwise until it clicks:
Correct Installation:
Incorrect Installation:
Make sure to install the dongle in a place that will not block or interfere the pedals or with the driver. In this case use the wire extender provided in the kit. Document:
EZ-ELD PRODUCT MANUAL 5 Led and Sound patterns Page 13 of 14 Date:
24 Jan 2017 Light and Sound Pattern Indication 2 Chirps (module powered on) 1 Chirp (Bluetooth paired and connected) 2 Chirps (Deleted paired devices) 3 Chirps (Factory Reset) Yellow Led Green Led Blue Led White Led Red Led (Blink four times) Red Led (Continuous blink and sound) Led blink three times (yellow, green, white or blue) Led blink two times (yellow, green, white or blue) Led blink one time (yellow, green, white or blue) Led solid (yellow, green, white or blue) Whenever you attach the dongle to the vehicles diagnostic port for the first time, the buzzer will chirp two times indicating that the module is powered ON Press the button and release, the led will blink green for about 40 seconds, the buzzer will chirp one time indicating that the pairing and connection were successfully done and Bluetooth is connected. Press and hold the button for about 5 seconds and release, the buzzer will chirp two times indicating that the paired devices were deleted on the dongle. Press and hold the button for about 12 seconds and release, the buzzer will chirp three times indicating that the dongle is back to a factory state. Dongle is not paired and not connected Dongle is in pairing mode. Bluetooth is connected to an IOS device. Bluetooth is connected to an Android device. Malfunction detected Vehicle in motion and driver does not log onto the ELD. GPS Not OK and Data Bus (CAN) not OK GPS OK and Data Bus (CAN) not OK GPS not OK and Data Bus (CAN) OK GPS OK and Data Bus (CAN) OK GPSData BusLed/Buzzer PatternFirst ConnectionModule Powered onNot paired and not connectedPress the pair button (Green Light - 40 sec)Bluetooth ConnectedIOS ConnectedAndroid ConnectedMalfunctionVehicle in motion Driver does not log onto the ELD Press and hold button approx. 4 sec Delete Paired BT devicesPress and hold button approx. 12 sec. Factory Reset--Continuous blink and sound--Led blink 4 times/BuzzerNOKNOKLed blink 3 timesOKNOKLed blink 2 timesNOKOKLed blink 1 timesOKOKSolid--1 Chirp --2 Chirps--3 Chirps Document:
EZ-ELD PRODUCT MANUAL Page 14 of 14 Date:
24 Jan 2017 6 Download the EZ-ELD App Download the EZ-ELD App for Android and IOS devices. Search for EZ-ELD in the Google Play Store for Android phones and search for EZ-ELD in the App Store for iPhones and iPads. For information on how to use the EZ-ELD App, please consult the DRIVER USER MANUAL. 7 Resetting the Dongle or Factory Reset the Dongle If you are having problems with the Dongle, you can reset it and start again. Resetting the Dongle will clear all the pairing data, delete any stored driving information and back the device to a factory state. To factory reset the Dongle:
1. Make sure the Dongle is powered on. 2. Press and hold the dongle button for about 12 seconds. 3. Release the button 4. The internal buzzer will chirp 3 times indicating that the Dongle is back to a factory state. 8 Electrical Characteristics 8.1 Power Supply Item Operating voltage Average Current Consumption @ 12V (Full Power) Average Current Consumption @ 12V (Sleep) (*1)
* 1 After protocol recognition and vehicle with engine off and Bluetooth disconnected Max. 32 Min. 9 Typ. 12 60 1.8 Unit V mA mA 8.2 Bluetooth Chipset Type / Version Frequency Class / Power Receive Sensitivity 8.3 GNSS Receiver Bluetooth 4.2 Dual Mode (Classic & LE) 2.402 to 2.480 GHz Class 2 (+2 dBm typ.)
-90 dBm (Classic); -92 dBm (LE) Constellations Number of channels Horizontal Position Accuracy
(CEP, 50%, 24 hours static, -130 dBm, > 6 SVs) Time-To-First-Fix
(All satellites at -130 dBm ) Receive Sensitivity GPS 48 2.5 m Cold Start: < 35 s Hot Start: 1 s Cold Start: -147 dBm Tracking: -163 dBm