FCC ID: 2ARUV-MWF82S01 802.11bgn module

by: PTCOM Technology CO., LTD. latest update: 2019-01-31 model: MWF82S01

One grant has been issued under this FCC ID on 01/31/2019 (this is one of two releases in 2019 for this grantee). Public details available include frequency information, manuals, and internal & external photos. some products also feature user submitted or linked password defaults, instructions, warrantee terms, troubleshooting guides, & drivers.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Trade-in? Recycling locations

eg for Slack usage

all	frequencies		exhibits	applications
		manual

all exhibits 12
1 ~ 2019-01-31 12

app s				submitted / available
1	Users Manual	Users Manual	pdf	543.09 KiB
1		Cover Letter(s)	pdf
1		Cover Letter(s)	pdf
1		Cover Letter(s)	pdf
1		External Photos	pdf
1		ID Label/Location Info	pdf
1		Internal Photos	pdf
1		RF Exposure Info	pdf
1		Cover Letter(s)	pdf
1		Cover Letter(s)	pdf
1		Test Report	pdf
1		Test Setup Photos	pdf

exhibit
download
text

Users Manual

Users Manual

pdf

543.09 KiB

PT7682W-SAOPTC0&

PT7686W-SAOPTC0 HDK User Guide SPEC. NO. REV DATE 2017.11.09 PRODUCT NAMEPT7682W/PT7686 W-** Hardware Development Kit APPROVED CHECKED PREPARED DCC ISSUE NAME PT7682W/PT7686W-SAOPTC0 HDK User Guide PTCOM Technology PT7682W/PT7686W-SAOPTC0 HDK User Guide Revision History Date 2017/11/09 2018/12/21 2018/1/28 Revision Content

-Preliminary Specification Add FCC warning Modify Product Naming for FCC Revised By Version Howard.Chen Jarron Cho Jarron Cho 0.1 2 3 PTCOM Technology Inc. www.ptcom.com.tw Proprietary & Confidential Information 1 PT7682W/PT7686W-SAOPTC0 HDK User Guide Contents 1. Introduction ......................................................................................................... 3 2. Get started with the HDK.................................................................................... 3 2.1 Configuring the PT7682W/PT7686W-SAOPTC0 HDK ................................... 3 2.2 Installing the PT7682W/PT7686W-SAOPTC0 HDK drivers on Microsoft Windows

............................................................................................................................. 4 2.3 Configuring the HDK flash mode .................................................................... 5 2.4 Downloading the image using the PT7682W/PT7686W-SAOPTC0 HDK as a removable storage ................................................................................................ 6 3. Hardware Features ............................................................................................. 7 4. Hardware Feature Configuration ....................................................................... 8 4.1 Microcontroller ................................................................................................ 8 4.2 Power supply .................................................................................................. 8 4.3 LEDs ............................................................................................................... 9 4.4 Buttons ......................................................................................................... 10 4.5 Extension Connectors ................................................................................... 10 4.6 RTC .............................................................................................................. 11 4.7 RF connections ............................................................................................. 11 4.8 CMSIS-DAP Firmware update procedure ..................................................... 11 5. Federal Communication Commission Interference Statement ..................... 12 PTCOM Technology Inc. www.ptcom.com.tw Proprietary & Confidential Information 2 PT7682W/PT7686W-SAOPTC0 HDK User Guide 1. Introduction PT7682W/PT7686W-SAOPTC0 HDK for real-time operating system (RTOS) is a low-cost and easy to use Internet of Things (IoT) development platform to design, prototype, evaluate and implement IoT projects. The platform supports PT7682W/PT7686W-SAOPTC0 hardware development kit (HDK) by SAC. This user manual provides required knowledge on features of the HDK, including the pins, communication interfaces, core microcontroller unit (MCU) description, the networking capabilities and how to use them through the host driver. The HDK includes PT7682/86 stamp module enables rich connectivity features, communication with cloud services and real-time control. The PT7682W/PT7686W-SAOPTC0 HDK supports ARM mbed IoT Device Platform for more convenient debugging and binary code download operations. The following features are available:

Mass storage device (MSD) programmer.

-- The PT7682W/PT7686W-SAOPTC0 HDK has three binary files for bootloader, Wi-Fi connectivity and FreeRTOS. The MSD programmer enables to update the FreeRTOS binary file only. Coresight Debug Access Port (CMSIS-DAP) debug interface.

-- A firmware debug interface similar to ST-link or J-link. It enables debugging a target project or downloading a binary to the flash storage of the device. Virtual Serial Port.

-- Supports UART functionality, such as transferring log information from the HDK. These features are used to download and debug a project on PT7682W/PT7686W-SAOPTC0 HDK. The front view of the HDK is shown in Figure 1. Figure 1. Front View of PT7682W/PT7686W-SAOPTC0 HDK 2. Get started with the HDK Before commencing the application development, you need to configure the development platform. 2.1 Configuring the PT7682W/PT7686W-SAOPTC0 HDK PT7682W/PT7686W-SAOPTC0 HDK includes a main board and a PT7682W/PT7686W-SAOPTC0 stamp module. The PT7682W/PT7686W-SAOPTC0 stamp module is mounted on the main board. The top view of the main board is shown in Figure 2. PTCOM Technology Inc. www.ptcom.com.tw Proprietary & Confidential Information 3 PT7682W/PT7686W-SAOPTC0 HDK User Guide Figure 2. Jumpers and connectors on the PT7682W/PT7686W-SAOPTC0 HDK The description of pins (Figure 2) and their functionality is provided below. 1). CON3001 is a USB connector to debug through UART, transmit and receive a signal and supply power from the PC. The USB connectivity with the PC is supported by the on-board MK20DX128VFM5. i. Set the jumpers J2002, J2003, J2004 and J2007 on, if the board is powered by a USB connector. 2). S2005 enables the external interrupt (configured at GPIO0), see section 4.4, Buttons, for more details. 3). S2006 enables the external interrupt (Dedicate EINT input in RTC), see section 4.4, Buttons, for more details. 4). Press S2001 to reset the system. 5). Wi-Fi Antenna is a PCB antenna. PT7682W/PT7686W-SAOPTC0 stamp module is by default connected to the PCB antenna to transmit and receive RF signals. The default configuration of the PT7682W/PT7686W-SAOPTC0 HDK supports the following functionality:

1). Power supply. Attach a micro-USB connector to the CON3001. 2). Supports RTC interrupt. 3). Clock source 32.768kHz source crystal clock for the RTC mode or external clock operating on 32.768 kHz. 4). XTAL at 40MHz. 5). Supports RTC mode. The hardware settings of the stamp module are shown below:

1). XTAL at 40MHz. 2). Clock source 32.768kHz source crystal clock for the RTC mode or external clock operating at 32.768kHz. 3). Supports RTC mode. 2.2 Installing the PT7682W/PT7686W-SAOPTC0 HDK drivers on Microsoft Windows To configure the PT7682W/PT7686W-SAOPTC0 HDK:

1). Connect the HDK to the computer using a micro-USB cable. 2). Download and install mbed Windows serial port driver from here. Open Windows Control Panel then click System and:

PTCOM Technology Inc. www.ptcom.com.tw Proprietary & Confidential Information 4 PT7682W/PT7686W-SAOPTC0 HDK User Guide On Windows 7 and 8, click Device Manager. On Windows XP, click the Hardware tab and then Device Manager. In Device Manager, navigate to Ports (COM & LPT) (see Figure 3). 3). 4). A new COM device should appear under Ports (COM & LPT) in Device Manager, as shown in Figure 3. Note the COMx port number of the serial communication port, this information is needed to send command and receive logs from the COM port. Virtual COM port is connected to the board through the UART1 of the chipset, see section 4.5, Extension connectors. The mbed Serial Port (UART1) is applied to flash the board and log the outputs. Figure 3. COM port associated with the PT7682W/PT7686W-SAOPTC0 HDK 2.3 Configuring the HDK flash mode The PT7682W/PT7686W-SAOPTC0 HDK is embedded with 2MB flash memory. The boot options are either from the Flash memory or from the UART port. To update the firmware on the PT7682W/PT7686W-SAOPTC0 HDK:

1). Set the jumpers J2002, J2003, J2004 and J2007 on. In this mode, if the power is on, the board will load ROM code and start the ATE Daemon or Firmware Upgrade Daemon according to the PT7682W/PT7686W-SAOPTC0 Flash Tools behavior on the PC. A message "ccc" is PTCOM Technology Inc. www.ptcom.com.tw Proprietary & Confidential Information 5 PT7682W/PT7686W-SAOPTC0 HDK User Guide sent to the UART0 port of the chipset and the code is uploaded to the embedded flash memory through UART0. 2). Connect the board to the computer using a micro-USB cable. The development board should now be connected to the PC, as shown in Figure 2. To run the project on the PT7682W/PT7686W-SAOPTC0 HDK:

1). Set the jumpers J2002, J2003, J2004 and J2007 on. In this mode, if the power is on, the board will load firmware from the Flash and reboot. 2). Connect the board to a computer using a micro-USB cable. The development board should now be connected to the PC, as shown in Figure 2. 2.4 Downloading the image using the PT7682W/PT7686W-SAOPTC0 HDK as a removable storage To update the FreeRTOS binary only (example project binary: mt7682_iot_sdk.bin), use the HDK as a mass storage device according to the following steps:

1). Power up the board with a micro-USB cable. 2). Navigate to Computer on your PC to check if a new mass storage named MT7682 is available under Removable Disk, as shown in Figure 4. 3). Open the MT7682 removable storage, then drag and drop the binary mt7682_iot_sdk.bin to complete downloading the image. PTCOM Technology Inc. www.ptcom.com.tw Proprietary & Confidential Information 6 PT7682W/PT7686W-SAOPTC0 HDK User Guide Figure 4. New removable storage detected 3. Hardware Features This section provides the main supported features of the PT7682W/PT7686W-SAOPTC0 HDK. The detailed description of the features is provided in the upcoming sections. IEEE 802.11bgn Wireless Connectivity Single Chip with QFN40 package. The IOs on MT7682 are 3.3V compatible. Support for FreeRTOS. Flexible on-board power supply

--USB with power (VBus, 5V).

--External VIN (1.8~3.2V). PTCOM Technology Inc. www.ptcom.com.tw Proprietary & Confidential Information 7 Ten LEDs PT7682W/PT7686W-SAOPTC0 HDK User Guide

--Power LEDs (D2001, D2002) and user LEDs (D1, D2, D3, D4, D5). Three push buttons

--System Reset.

--Real Time Clock (RTC) Interrupt.

--External Interrupt. XTAL (Crystal Oscillator)

--40MHz source clock support with low power consumption in idle mode.

--32.768kHz clock for the RTC mode or external 32.768kHz mode. USB re-enumeration capability: two different interfaces supported on the same USB.

--CMSIS-DAP USB.

--Virtual COM port UART through USB on PC. On-board chip antenna with U.FL for conducted testing. Micro USB connector for power and debug connections. Headers for current measurement. 4. Hardware Feature Configuration 4.1 Microcontroller MT7682 features an ARM Cortex-M4 with floating point processor, which is the most energy efficient ARM processor available. MT7682 provides low power consumption embedded architecture and its optimized for various types of applications in home automation, smart grid, handheld devices, personal medical devices and industrial control that have lower data rates, and transmit or receive data on an infrequent basis. 4.2 Power supply PT7682W/PT7686W-SAOPTC0 HDK supports two types of power supply. 1). Power up with a micro-USB connector. An on-board switching regulator provides voltage of 3.3V for the PT7682W/PT7686W-SAOPTC0 HDK based on MT7682F, if the power is supplied from an on-board micro-USB connector CON3001 (Figure 2). This supply can be isolated from the switching regulator using the jumpers. Note, that the jumpers J2002, J2003, J2004 and J2007 are required to be set on. More details on the jumpers can be found in Table 1. PTCOM Technology Inc. www.ptcom.com.tw Proprietary & Confidential Information 8 PT7682W/PT7686W-SAOPTC0 HDK User Guide Jumper J2002(1-2) Usage 3.3V power supply J2004 Current measurement J2003(1-2) RTC3V3 power supply J2007 Current measurement in RTC mode Comments Use micro-USB connector supporting 3.3V power source Measures the current flow in PT7682W/PT7686W-SAOPTC0 Use micro-USB connector supporting RTC 3V3 power Measures the current flow in RTC mode for PT7682W/PT7686W-SAOPTC0 Table 1. Jumper settings for system power input through USB connection 2). Power up using an AA or AAA battery. Connect an external AA battery to battery pin header (J2001) to supply power to the system, as shown in Figure 5. When using an AA battery, plug the USB to micro-USB connector CON5 (Figure 2). Note, that the jumpers J2003, J2004, and J2007 are required to be set on. More details on the jumpers can be found in Table 2. Figure 5. Power up the HDK using an AA or AAA Battery (J2001) Jumper J2002(2-3) Usage 3.3V power supply J2004 Current measurement J2003(2-3) RTC3V3 power supply Comments Use AA or AAA battery source supporting 3.3V power Measures the current flow in PT7682W/PT7686W-SAOPTC0 Use AA or AAA battery source supporting RTC 3V3 power Measures the current flow in RTC mode for PT7682W/PT7686W-SAOPTC0 J2007 Current measurement in RTC mode Table 2. System power input from AA or AAA battery jumpers 4.3 LEDs The PT7682W/PT7686W-SAOPTC0 HDK has onboard LEDs associated with different functionalities of the board (Figure 6). 1). D2002 indicates the power rail 5V is on. 2). D2001 indicates the power rail 3.3V is on. Figure 6. On-board LEDs 3). D1, D2, D3, D4, and D5 are LEDs assigned for user interaction. All LEDs are high active (Figure 6). GPIO pins to activate the LEDs are shown in Table 3. PTCOM Technology Inc. www.ptcom.com.tw Proprietary & Confidential Information 9 PT7682W/PT7686W-SAOPTC0 HDK User Guide LED D1 D2 D3 D4 D5 GPIO GPIO11 GPIO12 GPIO13 GPIO14 GPIO15 Table 3. GPIO pins to activate the LEDs 4.4 Buttons The PT7682W/PT7686W-SAOPTC0 HDK is equipped with buttons with the following functionality. The push buttons are shown in Figure 2. 1). System reset button (S2001) resets the MT7682 HDK. 2). External interrupt button (S2005). Users can configure GPIO0 as an external interrupt pin. Press the button to wake up the system from the sleep mode. 3). External interrupt button (S2006). To enter RETENTION mode is software configurable and to exit, use RTC timer or EINT. 4.5 Extension Connectors The PT7682W/PT7686W-SAOPTC0 HDK provides similar pin-out extension connectors

(J2101 and J2103) for various sensor and device connectivity, as shown in Figure 2 and described in Table 4. The board has 14 GPIOs multiplexed with other interfaces. Depending on the use case, user can configure each I/O functionality. Signal Name Signal Name Connector Pin Number J2101.1 J2101.2 J2101.3 J2101.4 J2101.5 J2101.6 J2101.7 J2101.8 J2101.9 J2101.10 GPIO20 GPIO19 GPIO18 GPIO17 GPIO16 GPIO15 GPIO14 GPIO13 GPIO12 GPIO11 Connector Pin Number J2103.1 J2103.2 J2103.3 J2103.4 J2103.5 J2103.6 J2103.7 J2103.8 J2103.9 J2103.10 J2103.11 GPIO0 GPIO1 GPIO2 GPIO3 GPIO4 GPIO5 GPIO6 GPIO7 GPIO8 GPIO9 GPIO10 Table 4. GPIO pin multi-function definition and pin-out extension connectors

*Note*

PTCOM Technology Inc. www.ptcom.com.tw Proprietary & Confidential Information 10 PT7682W/PT7686W-SAOPTC0 HDK User Guide Use the GPIO8 and GPIO9 pins as I2C0, add pull-up resistors on the HDK or on the I2C0 daughterboard. To add pull-up resistors on the HDK, refer to the resistor locations in Figure 7. The location of R2101 is for adding the pull-up resistor for I2C0_SDA (GPIO9). The location of R2102 is for adding the pull-up resistor for I2C0_CLK (GPIO8). Figure 7. Locations of I2C pull-up resistors 4.6 RTC The PT7682W/PT7686W-SAOPTC0 HDK features an RTC module. The clock source operates at 32.768kHz crystal oscillator or an external clock source. The RTC has built-in accurate timer to wake up the system when the user-defined timer expires. The RTC uses a different power source from the Power Management Unit (PMU). In hibernate or sleep mode, the PMU is turned off while the RTC module remains powered on. The RTC module only consumes 3A in hibernate mode. The RTC has a dedicated PMU control pin PMU_EN_RTC (pin 14) used to turn the power on when the RTC timer expires and turn the power off when it intends to enter the hibernate mode. 4.7 RF connections By default, the board ships with RF signals routed to the on-board chip antenna. An on-board U.FL, a conductive test component, (I-PEX) connector only available on PT7682W/PT7686W-SAOPTC0-SC version. 4.8 CMSIS-DAP Firmware update procedure The latest firmware from OpenSDA platform can be downloaded from the mbed official website. To update the binary firmware of CMSIS-DAP, press and hold the S2001, then plug-in the USB cable to CON3001, release the button S2001 once the mass storage is shown, and then drag and drop in the binary code. After the mass storage disappears, keep the power connected for 10 seconds, and then reboot the system again to finish the firmware update.

*Note*

Before you start to update CMSIS-DAP firmware via CON3001, please remember to confirm the Jumpers J2107 and J2108 are put on 2 and 3 pin. PTCOM Technology Inc. www.ptcom.com.tw Proprietary & Confidential Information 11 PT7682W/PT7686W-SAOPTC0 HDK User Guide 5. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Connect the equipment into an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/CANADA Operation of this device is restricted to indoor use only This device is intended only for OEM integrators under the following conditions:

1) The antenna must be installed such that 20 cm is maintained between the PTCOM Technology Inc. www.ptcom.com.tw Proprietary & Confidential Information 12 antenna and users, and PT7682W/PT7686W-SAOPTC0 HDK User Guide 2) The transmitter module may not be co-located with any other transmitter or antenna, 3) For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains FCC ID:

2ARUV-MWF82S01 Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. PTCOM Technology Inc. www.ptcom.com.tw Proprietary & Confidential Information 13

		frequency	equipment class	purpose
1	2019-01-31	2412 ~ 2462	DTS - Digital Transmission System	Original Equipment

Application Forms

app s	Applicant Information
1	Effective	2019-01-31
1	Applicant's complete, legal business name	PTCOM Technology CO., LTD.
1	FCC Registration Number (FRN)	0028023893
1	Physical Address	8F., No.89, Sec. 4, Chongxin Rd., Sanchong Dist.
1		New Taipei City, N/A 24161
1		Taiwan

app s	TCB Information
1	TCB Application Email Address	c******@telefication.com
1	TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques

app s	FCC ID
1	Grantee Code	2ARUV
1	Equipment Product Code	MWF82S01

app s	Person at the applicant's address to receive grant or for contact
1	Name	J** C****
1	Title	CEO
1	Telephone Number	+886 ********
1	Fax Number	+886 ********
1	E-mail	j******@ptcom.com.tw

app s	Technical Contact
1	Firm Name	International Certification Corp.
1	Name	G** C**
1	Physical Address	No.3-1, Lane 6, Wen San 3rd St. Kwei Shan Dist.
1	Physical Address	Taiwan
1	Telephone Number	886-3********
1	Fax Number	886-3********
1	E-mail	G******@icertifi.com.tw

app s	Non Technical Contact
1	Firm Name	International Certification Corp.
1	Name	W****** L******
1	Physical Address	No.3-1, Lane 6, Wen San 3rd St. Kwei Shan Dist.
1	Physical Address	Taiwan
1	Telephone Number	886-3********
1	Fax Number	886-3********
1	E-mail	w******@icertifi.com.tw

app s	Confidentiality (long or short term)
1	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1	If so, specify the short-term confidentiality release date (MM/DD/YYYY format)	07/30/2019
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1	Is this application for software defined/cognitive radio authorization?	No
1	Equipment Class	DTS - Digital Transmission System
1	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	802.11bgn module
1	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1	Modular Equipment Type	Single Modular Approval
1	Purpose / Application is for	Original Equipment
1	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	No
1	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1	Grant Comments	Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
1	Is there an equipment authorization waiver associated with this application?	No
1	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1	Firm Name	International Certification Corp.
1	Name	F** C******
1	Telephone Number	886-3******** Extension:
1	Fax Number	886-3********
1	E-mail	J******@icertifi.com.tw

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	15C		2412.00000000	2462.00000000	0.3270000

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details