FCC ID: 2A4AE-C23ZW005 LED Grow Light

Smart LED grow light User Guide Product Overview Thanks for purchasing our product, to ensure full understanding of the product and know how to use it properly, please read the user guide thoroughly and keep it for potential use. LED light source Ceramic module Electrical cavity Lamp holder E26 lamp base Installation WARNINGRisk of burn! Do not touch LED light source or the housing during use. WARNINGRisk of electric shock! Disconnect power before servicing. Put the lamp holder screwed to the E26 lamp base. App installation Search Stellar BLE in Google Store or App Store to get the App. NoteIf it has been installed on the phone, make sure the app is the latest version. Add devices 1. Turn on the light after the installation. 2. Open the Stellar BLE App, make sure the Bluetooth on your phone is on, get the phone close to the device. 3. Tap + on the top right of the Light interface, tap Add Devices to start searching devices. After the device is displayed on the list, select the device, tap NEXT to continue. 4. Wait for the device connection, ensure it has been added successfully, tap OK to finish. Note: Retry it several times if adding failed due to connection error. Restore factory settings You can select Disconnect on the Light Information interface, then select Remove, the device will be reset successfully after it blinks to constant white light(idle state). Technical Parameters Product Name: Smart LED grow light Model: C3ZW005-B0010A27 Input: AC 120V, 60Hz Rated Power: 10W Beam Angle: 60 IP Degree: IP20 Control Method: Mobile App Lamp holder Type: E26 Lifespan: 25000 hours Product Dimensions: 62*62*84mm Working Temperature: -10~-40 Cautions:

1. Read the instruction manual thoroughly before first use. Follow all the safety instructions and information. 2. This product is suitable for indoor plant cultivating scenarios like vertical farms, plant factory, plant incubator, greenhouse, etc. 3. Risk of burn! Do not touch LED light source or the housing during use. 4. Ensure the voltage given on the rating label / in the user guide complies with the power supply. 5. Do not stare at the operating light source or direct the beam at other people or animals to prevent eye damage. 6. Install the product according to the intended use and as described in this manual. 7. Do not install / place the product in adverse ambient conditions or in rooms where heat sources, hot steam, corrosive gas, flammable gas, vapors or dust are present. 8. For indoor use only! Do not expose the product to rain or wet conditions. 9. The light source of this product is not replaceable. When the light source reaches the end of its life, the whole luminaire has to be replaced. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be u sed in portable exposure condition without restriction FCC ID: 2A4AE-C23ZW005

C5266091_X10_Ed.2 Pujiang Yuansheng Electronic Commerce Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date:

Jan.25.2022 Subject: Request for Confidentiality FCC ID: 2A4AE-C23ZW005 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No NOTE 1 NOTE 1 No No Short-Term Confidentiality NOTE 2 No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ____45__ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 1/1 C5266091_X10_Ed.2 Sincerely, Signature:

Name: cao miaomia Title: Engineer 1/1

C5266091_X8_Ed.1 Letter of Authorization Pujiang Yuansheng Electronic Commerce Co., Ltd. Company: Pujiang Yuansheng Electronic Commerce Co., Ltd. Address: No.388,Yidianhong Road ,Pujiang Country, Zhejiang province, P.R.China Product Name: LED Grow Light Model Number: C23ZW005-B0010A27 FCC Identifier: 2A4AE-C23ZW005 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: cao miaomia Title: Engineer Date: Jan.25.2022 Signature of applicant:

1/1