|
app
s
|
Applicant Information
|
|
|
1 2 3 4
|
Effective |
2019-06-04
|
|
1 2 3 4
|
2019-05-30
|
|
1 2 3 4
|
Applicant's complete, legal business name |
Puloli, Inc.
|
|
1 2 3 4
|
FCC Registration Number (FRN) |
0028178168
|
|
1 2 3 4
|
Physical Address |
649 Mission Street
|
|
1 2 3 4
|
San Francisco, California 94105
|
|
1 2 3 4
|
United States
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4
|
TCB Application Email Address |
c******@micomlabs.com
|
|
1 2 3 4
|
TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
1 2 3 4
|
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4
|
Grantee Code |
2ASLS
|
|
1 2 3 4
|
Equipment Product Code |
RU700A10
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4
|
Name |
K******** K****
|
|
1 2 3 4
|
Telephone Number |
41578********
|
|
1 2 3 4
|
Fax Number |
415-5********
|
|
1 2 3 4
|
E-mail |
k******@puloli.com
|
|
|
app
s
|
Technical Contact
|
|
1 2 3 4
|
Firm Name |
MiCOM Labs Inc
|
|
1 2 3 4
|
Puloli, Inc.
|
|
1 2 3 4
|
Puloli, Inc
|
|
1 2 3 4
|
Name |
G**** H******
|
|
1 2 3 4
|
K******** K******
|
|
1 2 3 4
|
K****
|
|
1 2 3 4
|
Physical Address |
575 Boulder Court
|
|
1 2 3 4
|
649 Mission Street
|
|
1 2 3 4
|
Pleasanton, California 94566
|
|
1 2 3 4
|
San Francisco
|
|
1 2 3 4
|
San Francisco, 94105
|
|
1 2 3 4
|
United States
|
|
1 2 3 4
|
Telephone Number |
92546********
|
|
1 2 3 4
|
41578********
|
|
1 2 3 4
|
E-mail |
c******@micomlabs.com
|
|
1 2 3 4
|
k******@puloli.com
|
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 12/01/2019 |
| 1 2 3 4 | 11/26/2019 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 | Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| 1 2 3 4 | DTS - Digital Transmission System |
| 1 2 3 4 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Remote IoT Unit |
| 1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 4 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| 1 2 3 4 | Change in identification of presently authorized equipment. Original FCC ID: 2AJMTGPY01R Grant Date: 07/17/2018 |
| 1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 | Grant Comments | C2PC to activate 787 MHz to 788 MHz, using External Antenna with highest antenna gain of 5 dBi.
Modular Approval. Output power listed is conducted at antenna terminal. This device supports 1.4 MHz bandwidth mode (CAT-M1) with LTE Band 4/12/13. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. Antenna gain including cable loss must not exceed 7.0 dBi in the Band 4, 9.95 dBi in Band 12, and 10.91 dBi in Band 13 for the purpose of satisfying the requirements of CFR 47 2.1043 and 2.1091. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. |
| 1 2 3 4 | Modular Approval. Output power listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device supports 20 MHz and 40 MHz bandwidth modes. |
| 1 2 3 4 | Modular Approval. Output power listed is conducted at antenna terminal. This device supports 1.4 MHz bandwidth mode (CAT-M1) with LTE Band 4/12/13. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. Antenna gain including cable loss must not exceed 7.0 dBi in the Band 4, 9.95 dBi in Band 12, and 10.91 dBi in Band 13 for the purpose of satisfying the requirements of CFR 47 2.1043 and 2.1091. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.
This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. |
| 1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4
|
Firm Name |
MiCOM Labs
|
|
1 2 3 4
|
Bay Area Compliance Laboratories Corp. (Shenzhen)
|
|
1 2 3 4
|
Name |
G**** H****
|
|
1 2 3 4
|
W******** W********
|
|
1 2 3 4
|
Telephone Number |
925-4********
|
|
1 2 3 4
|
+86 (********
|
|
1 2 3 4
|
Fax Number |
925-4********
|
|
1 2 3 4
|
E-mail |
g******@micomlabs.com
|
|
1 2 3 4
|
q******@baclcorp.com
|
|