AGALMIC PW001Weight Sensor: User Manual Download the App The PW001Weight Sensor requires the Pulsa mobile app to scan identification codes and for initial setup. The Pulsa mobile app is available on Android and Apple iOS operating systems. The Pulsa mobile app can be downloaded for free at:
Android - Google Play Apple iOS - Apple App Store Turning on and maintenance PW001Weight Sensors are maintenance-free devices. They are always on and operating if a 2.7V to 3.5V power source is supplied. The PW001Weight Sensor is shipped to the customer with a battery installed and the product works out of the box. There is no need to turn the PW001Weight Sensor on or activate it. Installation Place the PW001 Weight Sensor on a flat surface and ensure that all of the feet are making contact with the flat surface. The PW001Weight Sensor will measure the Weightof the items placed on top of the Weight Sensor. Receiving data To start receiving data from the PW001Weight Sensor, plug the Pulsa gateway into a power source. Once the gateway is plugged in, PW001Weight Sensors in proximity will begin to appear in the mobile app. Follow the in-app instructions to name, associate and organize the available PW001Weight Sensors. If you are not able to complete the PW001Weight Sensor in-app procedure, please email support@pulsasensors.com Experience and data visualization PW001Weight Sensor data and the complete service is experienced via the following:
Android Pulsa App Website www.pulsasensors.com iOS Pulsa App Website: www.pulsasensors.comTel: 415.997.5525 Email: support@pulsasensors.com 724 Brannan St., San Francisco, CA 94103 AGALMIC FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be us ed in portable exposure condition without restriction. Website: www.pulsasensors.comTel: 415.997.5525 Email: support@pulsasensors.com 724 Brannan St., San Francisco, CA 94103