all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 3.85 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Internal Photos | |||||||
1 | Operational Description | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Users Manual | Users Manual | 3.85 MiB |
Important Notes :
1. Before operating the unit, please read these instructions carefully. 2. Retain this manual for future reference. 3. Do not remove any WARNING stickers on the unit. 4. You are advised to follow the instructions carefully when operating the unit. 5. Do not use any chemical solvent, cleaning agent or corrosive detergent to clean away dirt on the surface of the screen. By doing so, you may cause irreversible damage to the surface of the TFT screen. To clean off dirt or fingerprints, we recommend the use of a soft damp lens cleaning cloth. 6. Using spare parts from another manufacturer may caused permanent damage to the unit. 7. Place the unit on a flat, hard and stable surface. 8. Avoid installing the monitor screen in a position that is under direct sunlight and place unit away from hot air vent. 9. Install unit in a dry location away from condensation. 10. Obstacles may impead smooth running of the loadingmechanism and may cause electrical shorts-circuit. 11. Keep ventalation areas clear to allow unit to cool properly. 12. Ensure the plugs are properly plugged in before operating the unit. 13. Should the LCD panel be broken, do avoid all human contact with the broken glass or fluid leaking out from the enclosure. If you come into contact, do flush and clean affected areas with plenty of water. Seek medical attention immediately. 14. When operating the display unit, do avoid touching or pressing on the LCD glass panel. Excessive force may cause irreparable damage to the LCD screen. O W N E R S G U I D E INSTALLATION GUIDE 10.4 Go Anywhere DVD & TV System MODEL PB1040 2004 Directed Electronics, Inc. N90104 04-04 Notices:
CONTENTS 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. To comply with the FCC RF exposure compliance requirments , no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user's authority to operate the device. Safety Precautions:
1. Ensure the plug is securely plugged into the main socket before operating the unit. 2. Ensure the Voltage on the main socket is the same as specified on the unit. 3. In the event of thunder & lightning or when not using the unit for a long period of time, remove the plug from the main socket for safety. 4. Do not plug in too many appliances together with this unit to prevent overloading the power supply. 5. Use parts only manufactured by the unit manufacturers. 6. Request a repair report from the technician/service personnel. In case of the following emergencies, remove plug from the main socket immediately:
1. Plug or cables are damaged. 2. Any form of foreign objects dropped inside the enclosure. 3. Unit is being exposed to rain and/or water. 4. Unit unable to operate under normal operation. ATTENTION 1. location exposed to direct sunlight or strong artificial light 2. location exposed to high humidity, or poorly ventilated location CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 1. INTRODUCTION Overview ----------------------------------------------------------------
Product Specification -------------------------------------------------
Contents/Accessories ------------------------------------------------
2. FRONT PANEL CONTROL Panel Control -----------------------------------------------------------
Input/Output ------------------------------------------------------------
3. REMOTE CONTROL FUNCTION Controls & Functions -------------------------------------------------
4. INSTALLATION GUIDE When Connecting to a TV Cable -----------------------------------
Connecting to the AV in Socket ------------------------------------
Output (RCA) to other AV Equipment -----------------------------
Connect Power --------------------------------------------------------
When Using in Vehicle ------------------------------------------------
5. BASIC FUNCTIONS Power Signal -----------------------------------------------------------
Mode --------------------------------------------------------------------
Volume Setting ---------------------------------------------------------
Mute Setting ------------------------------------------------------------
Channel Search -------------------------------------------------------
Playing DVD/CD/MP3 ------------------------------------------------
Ejecting DVD/CD/MP3 -----------------------------------------------
TV Station Memory Mode -------------------------------------------
6. OPERATIONS Menu Setting -----------------------------------------------------------
Sleep Timer Setting ---------------------------------------------------
01 02 03 04 04 05 06 07 07 08 08 09 09 10 10 10 11 11 12 13 13 CONTENTS 7.6.9 GENERAL SETUP -------------------------------------------
7.7 Regional Setting --------------------------------------------------
8. ANNEX A LCD Maintenance -----------------------------------------------------
9. ANNEX B Troubleshooting -------------------------------------------------------
Common Problems ----------------------------------------------------
10. SPECIFICATIONS ----------------------------------------------
26 30 31 32 32 33 CONTENTS Video Adjust Setting Saturation -------------------------------------------------------------
Sharpness ------------------------------------------------------------
Brightness ------------------------------------------------------------
Contrast ---------------------------------------------------------------
Tint ---------------------------------------------------------------------
Preset ------------------------------------------------------------------
Exit ---------------------------------------------------------------------
14 14 15 15 16 16 17 FM TRANSMITTER ---------------------------------------------------
17 Others Channel Scan --------------------------------------------------------
TV Source Setting ---------------------------------------------------
Dimmer Setting ------------------------------------------------------
Speaker Setting ------------------------------------------------------
Return ------------------------------------------------------------------
7. DVD OPERATING INSTRUCTION 7.1 DVD/MP3/CD (FF/FB) -----------------------------------------
7.2 DVD/MP3/CD (NEXT/PREV TRK) --------------------------
7.3 DVD/MP3/CD (PLAY/PAUSE) --------------------------------
7.4 DVD/MP3/CD (STOP) ------------------------------------------
7.5 DVD/MP3/CD (SEARCH) -------------------------------------
7.6 DVD/MP3/CD PlayING Functions 7.6.1 DVD/MP3/CD (REPEAT FUNCTION) -----------------
7.6.2 DVD (ANGLE) ----------------------------------------------
7.6.3 DVD (MTS) --------------------------------------------------
7.6.4 DVD (SUBTITLE) --------------------------------------------
7.6.5 DVD (MENU) -------------------------------------------------
7.6.6 DVD (TITLE) ---------------------------------------------------
7.6.7 DVD/MP3/CD (DVD DISP) ----------------------------------
7.6.8 DVD (SETUP) -------------------------------------------------
18 18 19 19 20 21 21 22 22 22 23 23 24 24 24 25 25 26 1. INTRODUCTION Overview :
A 10.4" Transportable LCD Monitor bearing the basic features of a Television set, but comes with built-in DVD playable function. Built-in DVD playable function is a breakthrough to a household LCD Television set. It not only allows you to enjoy your DVD programs at home, but also you can put in your vehicle for car entertainment. New technology in LCD monitor allows enjoyment of more high quality picture display and higher brightness; lighter in weight and slimmer body design, power saving capabilities and low radiation, giving you a safe, relaxing and environmental-friendly NEW visual enjoyment. The unit comes with built-in screen display controls when used with the remote control, allowing you to make changes to the settings. It even supports the use of wireless headphones, therefore you do not need to worry that the volume coming out from the monitor will disturb other people. Product Specification :
1. 10.4" LCD Panel 2. Panel Ratio : 4 : 3 3. Built-in DVD Player (Support DVD/VCD/CD/MP3/JPEG Format) 4. CATV 2-125 Channels ; UHF/VHF Regular TV 5. Infra-Red Capabilities ; IR Headphone 6. Light Weight 7. Built-in Wall-Mount Support 8. Built-in FM Transmitter 9. Built-in speakers 10. Conventional Headphone Optional 11. A/V Inputs & Outputs 12. AC/DC Operations 13. Carry Case/Seat Back Options 01 02 Contents/Accessories :
(Please check the content of the Package.) 2.FRONT PANEL CONTROLS PANEL CONTROL :
1. LCD Monitor 2. DVD/CD/MP3 Slot 3. Remote Sensor 4. IR Transmitter 5. Speakers 6. Volume/Menu Up button 7. Volume/Menu Down button 8. Mode button 9. On/Off button 10. TV channel up button / DVD Eject Button 11. TV channel down button / DVD Play/Pause Button 12. OSD menu button 13. Power/Stand by LED 14. Earphone jack 15. Stand 2 1 3 4 15 14 5 13 12 11 10 9 78 6 5 14 15 Remote Control User Manual 10.4" Bag & Straps Wireless Headphone x 2 AC Cable DC Adaptor DC Power Plug AV Cable Battery x 4 B A T T E R Y B A T T E R Y B A T T E R Y B A T T E R Y INPUT/OUTPUT :
16. Audio L(Output) 17. Audio R(Output) 18. Video 19. DC In : 12V or AC Adaptor 20. Audio L(Input) 21. Audio R(Input) 22. Video 23. TV ANT 16 17 18 19 20 21 22 23 03 04 3. Remote Control Function :
(When using the remote control, point it towards the IR sensor.) 4. INSTALLATION GUIDE:
When Connecting to a TV Cable:
1. Plug the cable to the input socket on the unit. TV AVTENNA CATV CABLE 1 3 5 7 9 11 2 4 6 8 10 12 13 15 17 14 16 18 19 21 23 25 26 28 30 32 34 20 22 24 27 29 31 33 35 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. POWER : Power On/Off MUTE : Turn Off Volume MODE : Signal Button Up : Up Button SYS MENU : System Main Menu Selection Button SAVE/ENTER : Enter Button Left : Left Button Down : Down Button EJECT : DVD Eject Button STOP : DVD Stop Play Button PLAY/PAUSE : Play and Pause Button 1/2/3/4/5/6/7/8/9/0 : Numbers Button FB : DVD FAST Backward Play SLOW : DVD Slow Motion SUBTITL : DVD Subtitle Select Button PBC ON/OFF : DVD Restart DVD DISP : DVD Display Button SEARCH : DVD Search Button 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. VOL : Decrease Volume Button VOL : Increase Volume Button CH/ SET : Channel/Setting Up Button CH/ SET : Channel/Setting Down Button Right : Right Button SCAN : Channel Scanning MEMORY(+/-) : Favorite Channel Saved to Memory Button PREV TRK : Previous Track NEXT TRK : NEXT Track MENU : DVD Main Menu TITLE : DVD Title Button FF : DVD Fast Forward Play REP : DVD Repeat Button ANGLE : DVD Angle Select MTS : DVD Language Change Button ZOOM : DVD Zoom Button SETUP : DVD Setting Button 05 06 Connecting to the AV IN Socket :
1. This unit is able to support various input setting. You can connect your video recorder, amplifier, game console etc, to the unit, to enjoy high quality, digital audio-visual effect. 2. Connect your AV cable to the equipment. A. B. Output (RCA) to other AV Equipment:
Output the AV Signal using the unit AV output socket. Connect Power:
Connect to the power source using the power cable and adapter provided. AC SOCKET AC PLUG AV ADAPTOR AV CABLE DC INPUT SOCKET ATTENTION: Ensure the power supply is connected to the unit. When not using unit for a long period of time, remove power adapter socket from the main power point. Using in Vehicle:
07 08 ATTENTION: Plug the cigarette power (+12V) by using the DC Power plug wire with the unit. DC Power Plug DC Power Plug 5. Basic Functions :
POWER SIGNAL:
1. POWER indication LED on unit turns RED in color indicating power is connected. 2. Press the "ON/OFF" button on front control panel or the "Power" button on remote, the POWER indication LED on the TV Front Panel will turn "GREEN in color". VOLUME SETTING:
Press the "VOL / " button on front control panel or "VOLUME / " on remote to adjust the volume level. RED LIGHT GREEN LIGHT MUTE:
1. Press the "Mute" button on the remote control to mute speakers. 2. Press the "Mute" button again or the "Volume Up/Down" ( / )button to return the sound back to the speakers. Mode:
1. Press the "Mode" button on remote or "MENU" button on front control panel to select from the various mode settings. 2. The mode setting status will change each time the "Mode" button is pressed
"AV1 - CH - DVD"
AV1 CH DVD CHANNEL SEARCH:
1. Press the "Channel Up/Down" ( / ) button on remote or the TV Front control panel to change/select channels. 2. Press on the number buttons on the remote control to change/select channel directly. 09 10 PLAYING DVD/CD/MP3:
1. Press "Power" button to switch on the unit. 2. Press "Mode" button on the remote control repeatedly to select the " DVD " mode. 3. Insert the DVD into the DVD player as shown in the picture. 4. Disc will automatically play
--- If the DVD does not comes with Menu/Title, Play will continue.
--- If the DVD comes with Menu/Title, Menu Options will be shown on the screen, press the
"Left/Right/Up/Down" ( / / / )button on the remote control, select the chapter for playing, press "Enter" to begin play.
--- If "NO DISC" is display on the screen, check direction and format of the disc used.
--- If "WRONG REGION" is display on the screen, it means the player does not support the regional code the DVD is coded. 5. Press the "Left/Right/Up/Down" button to select the chapter to be played. 6. Press the "PLAY/PAUSE(CH )" button on front control panel or " " button on remote to play the DVD. EJECTING DVD/CD/MP3:
1. Press the "Mode" button on the remote control or "MENU" button on front control panel to select " DVD " mode. 2. Press the "Eject" ( ) button on the remote or on the front control panel "(CH )" to eject the DVD from the player. Insert Eject TV Station Memory Mode:
1. Under TV mode, select channel by using "CH/SET / " on remote (eg. CH01). 2. Press "ENTER" button on remote, main menu option will display on the screen as below:
CHANNEL MEMORY 1 MEMORY 2 MEMORY 3 MEMORY 4 MEMORY 5 MEMORY 6 MEMORY 7 MEMORY 8 MEMORY 9 MEMORY 10 MEMORY 11 MEMORY 12 MEMORY 13 MEMORY 14 MEMORY 15 EXIT MEMORY EMPTY EMPTY EMPTY EMPTY EMPTY EMPTY EMPTY EMPTY EMPTY EMPTY EMPTY EMPTY EMPTY EMPTY EMPTY 3. Use ( / ) button on remote to select to select memory number to be set. (total 15 memory) 4. Press "ENTER" to return to TV channel, the memory number has been set to be the most frequent selected channels (eg. CH01). 5. Repeat above steps to set all 15 favorite channels. 6. After all memory has been set, press the "MEMORY +/- " button on remote to select favorite channels. ATTENTION:To avoid scraping discs, please insert disc parallel into the slot. 11 12 6. OPERATIONS:
Menu Setting :
This Unit provide the "OSD" setting, enable you to customize the setting for the following:
MAIN MENU SLEEP TIMER VIDEO ADJUST FM TRANSMITTER OTHERS EXIT Sleep Timer Setting:
1. Press "Sys Menu" button on remote or "MENU" button on front control panel, main menu options will be displayed on the TV screen. 2. Press "Save/Enter" button on remote or "MENU" button on front control panel, the text of the selected option will be highlighted in RED. 3. Press "Left/Right" ( / )button on remote or "VOL /VOL " button on front control panel to select the desired time setting of "30/60/90/120" minutes or "OFF". 4. Press "Save/Enter" button on remote or "MENU" button on front control panel to save the setting. 5. Press "Sys Menu" button on remote to exit main menu. 1./5. 2./4. 3. MAIN MENU SLEEP TIMER VIDEO ADJUST FM TRANSMITTER OTHERS EXIT SLEEP TIMER 30 SLEEP TIMER 60 SLEEP TIMER 90 SLEEP TIMER 120 SLEEP TIMER OFF Video Adjust Setting:
Saturation:
1. Press "Sys Menu" button on remote or "MENU" button on front control panel, main menu options will be displayed on the TV screen. 2. Press "Up/Down" ( / )button on remote or "VOL /VOL " button on front control panel to select
"Video Adjust" option. 3. Press "Save/Enter" button on remote or "MENU" button on fron control panel to confirm the selection. 4. Press "Up/Down" ( / ) button on remote or "VOL /VOL " on front control panel to select
"SATURATION" option. 5. Press "Save/Enter" button on remote or "MENU" button on front control panel, the text of the selected option will be highlighted in RED. 6. Press "Left/Right" ( / ) button on remote or "VOL /VOL " button on front control panel to adjust the "Saturation" Level. 7.Press "Save/Enter" button on remote or "MENU" button on front control panel to save the setting. 8. Press "Sys Menu" button on the remote control to exit main menu. VIDEO ADJUST SATURATION SHARPENESS BRIGHTNESS CONTRAST TINT PRESET EXIT 8 4 7 4 7 SATURATION 1./8. 3./5./7. 2./4. 6. Sharpness:
1. Press "Sys Menu" button on remote or "MENU" button on front control panel, main menu options will be displayed on the TV screen. 2. Press "Up/Down" ( / ) button on remote or "VOL /VOL " button on front control paneto select
"Video Adjust" option. 3. Press "Save/Enter" button on remote or "MENU" button on fron control panel to to confirm the selection. 4. Press "Up/Down" ( / ) button on remote or "VOL /VOL " button on front control panel to select
"SHARPNESS" option. 5. Press "Save/Enter" buttonon remote or "MENU" button on front control panel, the text of the selected option will be highlighted in RED. 6. Press "Left/Right"( / ) button on remote or "VOL /VOL " button on front control panel to adjust the "Sharpness" Level. 7.Press "Save/Enter" button on remote or "MENU" button on front control panel to save the setting. 8. Press "Sys Menu" button on the remote control to exit main menu. VIDEO ADJUST SATURATION SHARPENESS BRIGHTNESS CONTRAST TINT PRESET EXIT 8 4 7 4 7 SHARPENESS 1./8. 3./5./7. 2./4. 6. 13 14 Brightness:
1. Press "Sys Menu" button on remote or "MENU" button on front control panel, main menu options will be displayed on the TV screen. 2. Press "Up/Down" ( / ) button on remote or "VOL /VOL " button on front control paneto select
"Video Adjust" option. 3. Press "Save/Enter" button on remote or "MENU" button on fron control panel to to confirm the selection. 4. Press "Up/Down" ( / ) button "VOL /VOL " button on front control panel to select
"BRIGHTNESS" option. 5. Press "Save/Enter" button on remote or "MENU" button on front control panel, the text of the selected option will be highlighted in RED. 6. Press "Left/Right"( / ) button on remote or "VOL /VOL " button on front control panel to adjust the "BRIGHTNESS" Level. 7.Press "Save/Enter" button on remote or "MENU" button on front control panel to save the setting. 8. Press "Sys Menu" button on the remote control to exit main menu. Tint:
1. Press "Sys Menu" button on remote or "MENU" button on front control panel, main menu options will be displayed on the TV screen. 2. Press "Up/Down" ( / ) button on remote or "VOL /VOL " button on front control paneto select
"Video Adjust" option. 3. Press "Save/Enter" button on remote or "MENU" button on fron control panel to to confirm the selection. 4. Press "Up/Down" ( / ) button "VOL /VOL " button on front control panel to select "TINT"
option. 5. Press "Save/Enter" button on remote or "MENU" button on front control panel, the text of the selected option will be highlighted in RED. 6. Press "Left/Right"( / ) button on remote or "VOL /VOL " button on front control panel to adjust the "TINT" Level. 7.Press "Save/Enter" button on remote or "MENU" button on front control panel to save the setting. 8. Press "Sys Menu" button on the remote control to exit main menu. VIDEO ADJUST SATURATION SHARPENESS BRIGHTNESS CONTRAST TINT PRESET EXIT 8 4 7 4 7 BRIGHTNESS 1./8. 3./5./7. 2./4. 6. VIDEO ADJUST SATURATION SHARPENESS BRIGHTNESS CONTRAST TINT PRESET EXIT 8 4 7 4 7 TINT 1./8. 3./5./7. 2./4. 6. Contrast:
1. Press "Sys Menu" button on remote or "MENU" button on front control panel, main menu options will be displayed on the TV screen. 2. Press "Up/Down" ( / ) button on remote or "VOL /VOL " button on front control paneto select
"Video Adjust" option. 3. Press "Save/Enter" button on remote or "MENU" button on fron control panel to to confirm the selection. 4. Press "Up/Down" ( / ) button "VOL /VOL " button on front control panel to select "CONTRAST"
option. 5. Press "Save/Enter" button on remote or "MENU" button on front control panel, the text of the selected option will be highlighted in RED. 6. Press "Left/Right"( / ) button on remote or "VOL /VOL " button on front control panel to adjust the "CONTRAST" Level. 7.Press "Save/Enter" button on remote or "MENU" button on front control panel to save the setting. 8. Press "Sys Menu" button on the remote control to exit main menu. Preset:
1. Press "Sys Menu" button on remote or "MENU" button on front control panel, main menu options will be displayed on the TV screen. 2. Press "Up/Down" ( / ) button on remote or "VOL /VOL " button on front control paneto select
"Video Adjust" option. 3. Press "Save/Enter" button on remote or "MENU" button on fron control panel to to confirm the selection. 4. Press "Up/Down" ( / ) button on remote or "VOL /VOL " button on front control panel to select
"PRESET" option. 5. Press "Save/Enter" button on remote or "MENU" button on front control panel, the text of the selected option will be highlighted in RED. 6. Press "Left/Right"( / ) button on remote or "VOL /VOL " button on front control panel to adjust the "PRESET" Level, then the setting will return back to the original factory setting. 7.Press "Save/Enter" button on remote or "MENU" button on front control panel to save the setting. 6. Press "Sys Menu" button on the remote control to exit main menu. VIDEO ADJUST SATURATION SHARPENESS BRIGHTNESS CONTRAST TINT PRESET EXIT 8 4 7 4 7 CONTRAST 1./8. 3./5./7. 2./4. 6. VIDEO ADJUST SATURATION SHARPENESS BRIGHTNESS CONTRAST TINT PRESET EXIT 8 4 7 4 7 1./8. 3./5./7. 2./4. 6. 15 16 Return:
1. Select the "Return" option under the "Audio Adjust" Menu using the "Up/Down" ( / ) button on remote or "VOL /VOL " button on front control panel. 2. Press "Save /Enter" button to return to the Main Menu Screen. OTHERS CHANNEL SCAN TV SOURCE DIMMER SPEAKER RETURN CABLE ON ON 2. 1. Dimmer Setting:
1. In TV mode, Press "Sys Menu" button on remote or "MENU" button on front control panel, main menu options will be displayed on the TV screen. 2. Press "Up/Down" ( / ) button or "VOL /VOL " button on front control paneto select "OTHERS"
option. 3. Press "Save/Enter" button or "MENU" button on fron control panel to to confirm the selection. 4. Press "Up/Down" ( / ) button on remote or "VOL /VOL " button on front control panel to select
"DIMMER" option. 5. Press "Save/Enter" button on remote or "MENU" button on front control panel, the text of the selected option will be highlighted in RED. 6. Press "Left/Right"( / ) button on remote or "VOL /VOL " button on front control panel to select "ON" or "OFF" option. 7.Press "Save/Enter" button on remote or "MENU" button on front control panel to save the setting. 8. Press "Sys Menu" button on the remote control to exit main menu. OTHERS CHANNEL SCAN TV SOURCE DIMMER SPEAKER RETURN CABLE ON ON 1./8. 3./5./7. 2./4. 6. Speaker Setting:
1. In TV mode, Press "Sys Menu" button on remote or "MENU" button on front control panel, main menu options will be displayed on the TV screen. 2. Press "Up/Down" ( / ) button on remote or "VOL /VOL " button on front control paneto select
"OTHERS"option. 3. Press "Save/Enter" button or "MENU" button on fron control panel to to confirm the selection. 4. Press "Up/Down" ( / ) button "VOL /VOL " button on front control panel to select "SPEAKER"
option. 5. Press "Save/Enter" button on remote or "MENU" button on front control panel, the text of the selected option will be highlighted in RED. 6. Press "Left/Right"( / ) button on remote or "VOL /VOL " button on front control panel to select "ON" or "OFF" option. 7.Press "Save/Enter" button on remote or "MENU" button on front control panel to save the setting. 8. Press "Sys Menu" button on the remote control to exit main menu. OTHERS CHANNEL SCAN TV SOURCE DIMMER SPEAKER RETURN CABLE ON ON 1./8. 3./5./7. 2./4. 6. 19 20 7. DVD OPERATING INSTRUCTION 7.1 DVD/MP3/CD Fast-Forward & Fast-Backward 1. During play, press the "FF" button on the remote control:
a. The screen will display "FF XX" (Fast-Forward Speed) every time the "FF" button is pressed. b. CD Fast-Forwarding (different speed to choose from) Press "Play" button to resume normal speed. MP3/DVD Fast-Forwarding(different speed to choose from). c. Press "Play" button to resume normal speed. 2. During play, press the "FB" button on the remote control:
a. The screen will display "FB XX" (Fast-Backward Speed) every time the "FB" button is pressed. b. CD Fast-Forwarding (different speed to choose from) Press "Play" button to resume normal speed. MP3/DVD Fast-Forwarding(different speed to choose from) c. Press "Play" button to resume normal speed. FB 7.2 DVD/MP3/CD Next Track / Previous Track 1. During play, press the "NEXT TRK" button on the remote control:
a. The screen will display "NEXT TRK" text in MP3, Audio CD Mode. b. This function will jump to the next track or chapter under DVD mode. 2. During play, press the "PREV TRK" button on the remote control:
a. The screen will display "PREV TRK" text in MP3, Audio CD Mode. b. This function will jump to the previous track or chapter under DVD mode. PREV TRK FF 7.3 DVD/MP3/CD Play / Pause a. During play, presses the "Play/Pause" button on the remote control to stop play temporary. b. Press "Play/Pause" button again to resume playback. 7.4 DVD/MP3/CD Stop a. Press "Stop" button on the remote control to stop playback when playing an Audio CD. b. Press "Stop" button on the remote control when playing DVD will pre-stopped the DVD at the current location, "Press Play To Continue" message will display on the TV screen. Press "Play/Pause" button to resume playback. c. Press the "Stop" button twice will stop the playback.
** Pre-Stop Capabilities is not supported in Audio CD PLAY/
PAUSE STOP 7.5 DVD/MP3/CD Search a. This unit supports Searching using Time/Track/Chapter option. b. Press "Search" button to go to the screen as shown below:
NEXT TRK
(1)
(2) TITLE xx/xx CHAPTER xxx/xxx TITLE xx/xx xx : xx : xx SEARCH 21 22 c. Use the Number buttons on the remote control to enter the track, chapter or time. d. Press "Enter" button to confirm location you have selected. 7.6.3 DVD MTS MTS Setting is ONLY applicable to disc that support multi sound track. AUDIO STEREO AUDIO LL AUDIO RR 7.6 DVD/MP3/CD Playing Functions 7.6.1 Repeat Function a. In "AudioCD/MP3" mode, Press "Repeat" button to restart the playback. REP ONE = The current track will be repeated FOLDER REP = The current folder will be repeated FOLDER = All the folders will be repeated a. Press "MTS" button during playback, "Audio x/y"
will displayed on the TV screen. b. X represent the current soundtrack, Y represent the other track that is available. c. Press "MTS" button to select the desired soundtrack. MTS REPEAT 7.6.4 DVD Subtitle This unit supports Subtitle display in various languages. a. Press "Subtitle" button during playback, the following will be display on the TV screen. b. In "DVD" mode, Press "Repeat" button to restart the playback. AUDIO STEREO AUDIO RR CHAPTER REPEATION = The current chapter will be repeated TITLE REPEAT = The current title will be repeated REPEAT OFF = Repeat mode will be switched off 7.6.2 DVD Angle a. Some DVD supports different viewing angle function. b. Press "Angle" button to view DVD playback from different angle.
** This function ONLY works with DVD Disc that has different viewing angle support. ANGLE b. In the "Subtitle On" mode, press "Subtitle" to display"subtitle x/y" on the TV screen, X represent current subtitle, Y represent the other available subtitles. c. Press "Subtitle" button repeatedly to select the desired subtitle. SUTITLE
** This function can ONLY be used on DVD disc that comes with Multi-Language Title support. 7.6.5 DVD Menu A lot of DVD comes with unique selectable menu, but with similar operating methods. a. Press "Menu" button during playback, Menu will be displayed on the TV screen. b. Use the "Left/Right/Up/Down" ( / / / )button or Number button to select from the menu options. c. Press "Enter" to confirm the selection. MENU 23 24 7.6.6 DVD Title Some DVD is comes with titles selectable.For such case, press the "Title"
button to go into "Title Menu". a. Press "Title" button during playback to display all titles on TV screen. b. Use the "Left/Right/Up/Down" ( / / / )button or Number button to select desired title. c. Press "Enter" to confirm the selection. TITLE 7.6.7 DVD/MP3/CD DVD DISP The "DVD DISP" function displays the various status of the DVD disc during playback. Various statuses include "Title", "Track",
"Elapsed Time" etc. a. Press the "DVD DISP" button in "Audio CD" mode, the following will be displayed on the TV Screen. Current Track Total Tracks Time SINGLE ELAPSED 01/15 01 : 40 SINGLE REMAIN 01/15 02 : 39 TOTAL ELAPSED 01/15 01 : 40 TOTAL REMAIN 01/15 42 : 19 b. Press the "DVD DISP" button in "MP3" mode, the following will be displayed on the TV Screen:
SINGLE ELAPSED 00 : 00 : 15 SINGLE REMAIN 00 : 02 : 37 DVD DISP c. Press "DVD DISP" button in "DVD" mode, the following will be displayed on the TV Screen. TITLE XX/XX CHAPTER XXX/XXX HH : mm : SS TITLE REMAIN HH : mm : SS SINGLE ELAPSED HH : mm : SS SINGLE REMAIN HH : mm : SS 7.6.8 DVD Setup Press the "Setup" button to modify the DVD setting. When the COM [DVD] player is in stop mode, press "Setup" button to display as follow:
SETUP MENUMAIN PAGE
(1) GENERAL SETUP
(2) SPEAKER SETUP
(3) AUDIO SETUP
(4) PREFERENCES
(5) VERSION INFO
(6) EXIT SETUP SETUP 7.6.9 General Setup Use the "Up/Down" ( / )button to scroll to "General Setup" option and press "Enter" button. The following will be displayed on the TV Screen.
(a) TV DISPLAY
(1) NORMAL/PS
(2) NORMAL/LB
(3) WIDE
(b) PIC MODE
(1) AUTO
(2) HI-RES
(3) N-FLICKER
(c) ANGLE MARK ON OFF
(d) OSD LANG ENGLISH CHINESE 25 26
(e) CAPTIONS ON OFF
(f) SCR SAVER ON OFF
(g) MAIN PAGE
(h) SPEAKER SETUP
(h-1) DOWNMIX LT/RT STEREO
(i) AUDIO SETUP
(i-1) DUAL MONO STEREO L-MONO R-MONO MIX-MONO
(i-2) DYNAMIC FULL 6/8 4/8 2/8 OFF
(i-3) MAIN PAGE
(j) KARAOKE SETUP
(j-1) KARAOKE OFF KARAOKE
(j-2) MAIN PAGE
(k) PREFERENCES PAGE
(1) MULTI
(k-1) TV TYPE
(2) NTSC
(3) PAL
(k-2) AUDIO (1) ENGLISH
(2) FRENCH
(3) SPANISH
(4) CHINESE
(5) JAPANESE
(k-3) SUBTITLE (1) ENGLISH
(2) FRENCH
(3) SPANISH
(4) CHINESE
(5) JAPANESE
(6) OFF 27 28
(k-4) DISC MENU (1) ENGLISH
(2) FRENCH
(3) SPANISH
(4) CHINESE
(5) JAPANESE
(1) CHINA
(l) LOCALE
(2) FRENCE
(3) HONG KONG
(4) JAPAN
(5) TAIWAN
(6) GBR
(7) USA
(m) PARENTAL RESTRICTION Using "Up/Down" ( / )or Number Buttons, Select Parental Restriction, Press "Enter", unit will request for password, key in "1234". 1 G 2 3 PG 4 PG 13 5 6 PG-R 7 NC-17 8 ADULT NO PARENTAL
(n) PASSWORD Change PASSWORD, Enter "1234", key in the NEW PASSWORD using Number buttons, Press "Enter"
button, the process to change PASSWORD will be completed. CHANGE
(o) DEFAULTS Reset
(p) SMART NAV(For use on MP3 CD ONLY)
(q) MAIN PAGE
(r) EXIT SETUP 7.7 REGIONAL SETTING This DVD playing system is designed with regional restrictions. Before playing a disc, ensure the region code indicated on the disc is the same code as specified on the unit. Below is the list of Regional Code used :
1 -- CANADA, USA, US TERRITORIES 2 -- JAPAN, EUROPE, SOUTH AFRICA, MIDDLE EAST
(INCLUDE EGYPT), GREENLAND 3 -- SOUTHEAST ASIA, EAST ASIA(INCLUDE HONGKONG, TAIWAN) 4 -- AUSTRALIA, NEW ZEALAND, SOUTH & CENTRAL AMERICA, MEXICO, CARRIBBEAN, PACIFIC ISLANDS 5 -- RUSSIA, INDIA, NORTH KOREA, MONGOLIA, EASTERN EUROPE, AFRICA EXCLUDING SOUTH AFRICA 6 -- CHINA 29 30 8. ANNEX A LCD Monitor Care & Cleaning Tips:
To avoid possible shock hazard, be sure the LCD TV is turn off and unplugged from the main electrical outlet before cleaning. Do not use any form of solvents on the LCD monitor. Cleaning the LCD Monitor:
1. Use a soft, clean & dry cloth to gently wipe off the dust on the LCD monitor. 2. Use a clean cloth dampened with water to wipe off the dirt. 3. Do not exert force when cleaning the LCD monitor. Cleaning the Enclosure:
1. Use a soft, clean & dry cloth to gently wipe off the dust on the LCD monitor. 2. Use a clean cloth dampened with water to wipe off the dirt. 3. Do not exert force when cleaning the LCD monitor. 9. ANNEX B Troubleshooting:
If the unit fails to operate normally, try solving the problems using the guide below. If the problem persists, switch off the unit and ask the dealer or technical services for assistance. Do not attempt to repair the defective unit yourself. Do not endanger yourself as high voltage is involved. 1. No Picture a. Check that the power cord is plugged into the main socket and the power supply is turned on. b. Check the contrast and brightness setting. c. Check the Antenna connection to see if it is properly connected to the LCD TV Input Terminal. d. Be sure you have selected the correct source mode. 2. DVD Player Not Working Properly a. Ensure disc is correctly inserted into the player. b. Ensure disc is not damaged and is of correct format. c. Please wait patiently as some disc requires longer time to read. 3. Snowish Picture a. Check to see if the Antenna is correctly connected. b. Check to see if the picture setting is correctly set. 4. Flickers Picture a. Check that the power coming from the main socket is sufficient. b. Check that unit is not placed too near speakers or magnetic objects. c. Check to see that the unit setting is correctly set. 5. Color Patch(Unevenness) Be sure you have made connection correctly. 6. Horizontal Dotted Be sure you have made connection correctly. 7. No Sound a. Check that mute function is off. b. Increase the volume. 8. Remote Control not Working. a. Check batteries are installed correctly, replaced if necessary. b. Aim the remote controller towards the unit remote sensor. 31 32 10. SPECIFICATIONS:
PRODUCT TYPE LCD PANEL BRIGHTNESS RATIO BACKLIGHT DISPLAY ANGLE AV INPUT/OUTPUT OSD LANGUAGE OPERATING VOLTAGE IR TRANSMITTER REMOTE 10.4" 4:3 DIGITAL LCD TV BUILT-IN DVD/VCD/CD/MP3/JPEG PLAYER 10.4" 4:3 LCD PANEL 2 250cd/m 200:1 10000hrs NORMAL OPERATION Verhical:170 / Horizontal:170 AV INPUT / AV OUTPUT ENGLISH / CHINESE AC110-230V 50Hz DC:9-12V 4A L:2.3Mhz R:2.8Mhz EFFECTIVE ANGLE:45 EFFECTIVE RANGE:4 METRE REMOTE RANGE:5 METRE TV SPECIFICATION NTSC ; NTSC-JAPAN PAL-BG ; PAL-I ; PAL-DK DVD PLAYER SINGLE DISC VERTICAL LOADING DVD PLAYERSUPPORT DVD/VCD/CD/MP3/JPEG FORMAT ACCESSORIES(INCL) 1. 10.4" PORTABLE BAG 2. USER MANUAL 3. REMOTE CONTROL(w/BATTERY) 4. DC ADAPTOR 5. AC CABLE 6. DC POWER PLUG 7. AV CABLE 8. WIRELESS HEADPHONE x2
(w/BATTERY x 4) FM TRANSMITTER CH1 : 88.1 MHz CH2 : 88.3 MHz CH3 : 88.5 MHz CH4 : 88.7 MHz This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received. Including interference that may cause undesired operation. When installing this unit, please check that you are in compliance with your local traffic rules and regulations This product incorporates copy right protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Manufactured under License from Dolby Laboratories. "Dolby" and double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. c 1992-1997 Dolby Laboratories. All rights reserved 33 34 NON-TRANSFERABLE LIMITED ONE YEAR CONSUMER WARRANTY Directed Electronics, Inc. (Directed) promises to the original purchaser that the new automotive video monitor and/or source unit(s) (the Product) that is purchased and installed from a Directed authorized dealer more than ninety (90) days after the purchase of a new vehicle are warranted for a period of one
(1) year from date of purchase of the Product. Directed promises to the original purchaser that all video accessories will be free from defects in materi-
als and workmanship under normal use and condition for a period of ninety (90) days after the date of purchase. A sales receipt and/or warranty registration card is required to provide proof of date of purchase of the Product or accessories. Should the Product be determined defective during the applicable warranty period, the defect(s) will be repaired or replaced with a new or reconditioned part(s), at Directed's option. To obtain warranty service, the Product must be returned to a Directed authorized dealer along with proof of purchase and installation. Note: This warranty does not cover labor costs for the removal and reinstallation of the Product. IN ORDER FOR THIS WARRANTY TO BE VALID, YOUR PRODUCT MUST BE SHIPPED WITH PROOF OF PURCHASE AND INSTALLATION BY AN AUTHORIZED DIRECTED DEALER. ALL PRODUCTS RECEIVED BY DIRECTED FOR WARRANTY REPAIR WITHOUT PROOF OF DIRECTED DEALER INSTALLATION WILL BE DENIED. This warranty is non-transferable and does not apply to any Product that has been modified or used in a manner contrary to its intended purpose, and does not cover damage to the Product caused by installa-
tion or removal of the Product. This warranty is VOID if the product has not been purchase from an author-
ized Directed dealer or has been damaged by accident or unreasonable use, negligence, acts of God, neglect, improper service or other causes not arising out of defect in materials or construction. This war-
ranty does not cover the elimination of externally generated static or noise, or the correction of antenna problems or weak television reception, damage to tapes, video games, software, camcorders, discs, speakers, accessories or vehicle electrical systems, cosmetic damage or damage due to negligence, mis-
use, abuse, failure to follow operating instructions, accidental spills or customer applied cleaners, damage due to environmental causes such as floods, airborne fallout, chemicals, salt, hail, windstorms, lightning or extreme temperatures, damage due to accidents, road hazards, fire, theft, loss or vandalism, damage due to improper connection to equipment of another manufacturer, modification of existing equipment, use of a faulty tape cartridge or cleaning of the VCR head, or Product which has been opened or tampered with for any reason or which has been damaged due to alteration or service performed by anyone other than Directed Electronics, Inc. ALL WARRANTIES INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRAN-
TY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND WARRANTY OF NON-INFRINGEMENT OF INTELLECTUAL PROPERTY ARE EXPRESSLY EXCLUDED TO THE MAXIMUM EXTENT ALLOWED BY LAW, AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON TO ASSUME FOR IT ANY LIABILITY IN CONNECTION WITH THE SALE OF THE PRODUCT. DIRECTED HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PAR-
TIES INCLUDING ITS LICENSED DEALERS OR INSTALLERS. IN NO EVENT WILL DIRECTED ELEC-
TRONICS, INC. BE LIABLE FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
(INCLUDING LOSS OF PROFITS), BY PURCHASING THIS PRODUCT, THE CONSUMER AGREES AND CONSENTS THAT ALL DISPUTES BETWEEN THE CONSUMER AND DIRECTED SHALL BE RESOLVED IN ACCORDANCE WITH CALIFORNIA LAWS IN SAN DIEGO COUNTY, CALIFORNIA. Some states do not allow limitation on how long an implied warranty lasts. In such states, the limitations or exclusions of this Limited Warranty may not apply. Some states do not allow the exclusion or limitation of incidental or consequential damages. In such states, the exclusion or limitation of this Limited Warranty may not apply to you. This Limited Warranty gives you specific legal rights, and you may have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages. In such states, the exclusion or limitations of this Limited Warranty may not apply to you. This Limited Warranty gives you specific legal rights and you may have other rights which vary from state to state. 02 April 2004 The company behind this system is Directed Electronics, Inc. Since its inception, Directed has had one purpose, to provide consumers with the finest vehicle security, car stereo products, rear seat entertainment, and accessories available. The recipient of more than 20 patents in the field of advanced electronic technology, Directed is ISO 9001 registered. Quality Directed Electronics products are sold and serviced throughout North America and around the world. Call (800) 274-0200 for more information about our products and services. Directed is committed to delivering world-class quality products and services that excite and delight our customers. Directed Electronics, Inc. Vista, CA 92081 www.directed.com 2004 Directed Electronics, Inc.All rights reserved N90104 04-04
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2004-07-29 | 88.1 ~ 88.7 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2004-07-29
|
||||
1 | Applicant's complete, legal business name |
Punch Video Inc.
|
||||
1 | FCC Registration Number (FRN) |
0010980217
|
||||
1 | Physical Address |
No. 18, Chung Shin Road
|
||||
1 |
Taipei, N/A 236
|
|||||
1 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
M******@CCSEMC.COM
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
R69
|
||||
1 | Equipment Product Code |
FD1040DPB1040
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J**** L******
|
||||
1 | Title |
Salesman
|
||||
1 | Telephone Number |
+886-********
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
j******@punch-video.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | DVD & TV System with FM Transmitter | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Electronics Testing Center, Taiwan
|
||||
1 | Name |
W******** Y******
|
||||
1 | Telephone Number |
886-3********
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
w******@etc.org.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 28 | 88.10000000 | 88.70000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC