Correctly dispose of this product. This marking indicates that this product should not be disposed with other household wastes throughout the E U. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle responsibly to promote the sustainable reuse of material resources. To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS. Important safety information Read all the safety information below before using your device. Using unauthorized cables, power adapters, or batteries can cause re, explosion, or pose other risks. Use only authorized accessories which are compatible with your device. This devices operating temperature range is 0~ 40. Using this device in the environments outside of this temperature range may damage the device. If your device is provided with a built-in battery, dont attempt to replace the battery yourself to avoid damaging the battery or the device. Charge this device only with the included or authorized cable and power adapter. Using other adapters may cause re, electric shock, and damage the device and the adapter. After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device longer than 12 hours. The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause re or explosion. Dispose or recycle the device, its battery and accessories according to the local regulations. Do not disassemble, hit, crush, or burn the battery. In case of deformation, stop using the battery immediately.
- Do not short circuit the battery to avoid overheating, burns, or other personal injuries.
- Do not place the battery in the high-temperature environments. Overheating may cause explosion.
- Do not disassemble, hit, or crush the battery to avoid battery leaks, overheating, or explosion.
- Do not burn the battery to avoid re or explosion.
- In case of deformation, stop using the battery immediately. Keep your device dry. Do not try to repair the device yourself. If any part of the device does not work properly, contact customer support or bring your device to an authorized repair center. Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device. For AC/DC Adapter, the socket-outlet shall be installed near the equipment and shall be easily accessible. Safety precautions Follow relevant laws and regulations. Do not use your XPOS in the following environments. Do not use your XPOS in a potentially explosive environments include fuelling areas, below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Obey all posted signs to turn off wireless devices such as y our XPOS or other radio equipment. Do not use your XPOS in the hospital operating rooms, emergency rooms, or intensive care units.Please consult your doctor and the device manufacturer to determine if operation of your XPOS may interfere with the operation of your medical device.To avoid potential interference with the pacemaker.keep a minimum separation of 15 cm be maintained between the mobile XPOS and the pacemaker . To achieve this use the XPOS on the opposite ear to your pacemaker and do not carry it in a breast pocket.Do not use your XPOS near hearing aids, cochlear implants, etc to avoid interference with medical equipment. Respect aircraft safety regulations and turn off your XPOS on board the aircraft when required. When driving a vehicle, use your XPOS in accordance with the relevant trafc laws and regulations. To avoid lightning strike, do not use your XPOS outdoors during thunderstorms. Do not use your XPOS to make calls while it is charging. Do not use your XPOS in places with high humidity such as bathrooms. Doing so may result in electric shock, injury, re, and charger damage. Observe any rules which restrict using mobile XPOS in specic cases and environments. Security notice Update your phones operating system using the built-in software update feature, or visit our authorized service outlets. Updating software through other means may damage the device or result in data loss, security issues, and other risks. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF Exposure Information (SAR) This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The exposure standard for wireless device employs a unit of measurement known as the Specic Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/Kg. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and be positioned a minimum of 0 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. If you do not use a body-worn accessory and are not holding the device at the ear, position the handset a minimum of 1.0 cm from your body when the device is switched on. FCC Note Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits. 5GHz devices only High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. No configuration controls are provided for this wireless equipment allowing any change in the frequency of operations outside the FCC grant of authorization for US operation according to Part 15.407 of the FCC rules. IC statement This device complies with RSS247 of Industry Canada. Cet appareil se conforme RSS247 de Canada d'Industrie. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prejudiciable, et (2) ce dispositif doit accepter tout brouillage recu, y compris un brouillage susceptible de provoquer un fonctionnement indesirable. Notice for 5 GHz devices Caution:
(i) the device for operation in the band 5150 - 5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) the maximum antenna gain permitted for devices in the bands 5250 - 5350 MHz and 5470 - 5725 MHz shall comply with the e.i.r.p. limit: and
(iii) the maximum antenna gain permitted for devices in the band 5725 -
5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate.
(iv) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250 - 5350 MHz and 5650 -
5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Exposure of humans to RF fields (RSS-102) The computers employ low gain integral antennas that do not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site at http://www.hc-
sc.gc.ca/
The radiated energy from the antennas connected to the wireless adapters conforms to the IC limit of the RF exposure requirement regarding IC RSS-102, Issue 5 clause 4. SAR tests are conducted using recommended operating positions accepted by the FCC/ RSS with the device transmitting at its highest certified power level in all tested frequency band without distance attaching away from the body. Non-compliance with the above restrictions may result in violation of FCC RF exposure guidelines. Conformit des appareils de radiocommunication aux limites d'exposition humaine aux radiofrquences (CNR-102) L'ordinateur utilise des antennes intgrales faible gain qui n'mettent pas un champ lectromagntique suprieur aux normes imposes par Sant Canada pour la population. Consultez le Code de scurit 6 sur le site Internet de Sant Canada l'adresse suivante : http://www.hc-
sc.gc.ca/ L'nergie mise par les antennes relies aux cartes sans fil respecte la limite d'exposition aux radiofrquences telle que dfinie par Industrie Canada dans la clause 4.1 du document CNR-102, version 5. Tests DAS sont effectus en utilisant les positions recommandes par la FCC/
CNR avec le tlphone met la puissance certifie maximale dans toutes les bandes de frquences testes sans distance attacher loin du corps. Non-respect des restrictions ci-dessus peut entraner une violation des directives de la FCC/CNR. FCC Regulations This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including anterference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: