FCC ID: 2A7F7GYXSL-TVD6003H Pxierra Ai Baby Monitor

Quick Sta! Guide v1.0.1 English Pxierra Ai Baby Monitor Floor Stand Suit 1 Models: TVD6003H 1.0.1 White Contents Status Reference page 2 Safety page 3 Notice page 4 Advices page 5 In The Box page 6 What prepare by yourself page 7 Let`s Get Sta!ed page 8 Installation Options page 9 Limited Warranty & Compliance page15 Status & Reference Night LIght & Status Light Mic Array Ve!ical Axis Halo Light Sensor Speaker Reset Button Horizontal Axis Halo Temperature & Humidity Sensor Starlight Color Image Sensor Invisible Infrared Led Constant light up 10 seconds Initial Boot Successfully Constant light o"

Breathing light up 5 min Silent Working/No Power/Net Con#g Good Connection And Working Constant light up all the time Night Light Controlled By APP

$ickers intermittently The Device Is Faulty 2 Safety Pxierra Ai Baby Monitor was created to help parents track factors that a#ect their babys safe sleep and general review.This product cannot replace adult supe"ision. Ensure your childs health by checking on him/her regularly. It is not designed to cure, treat, or prevent any disease or health condition, including, but not limited to, Sudden Infant Death Syndrome (SIDS). No baby monitor can ever replace you as a caregiver, or substitute for asking your doctor for medical advice. WARNING STRANGULATION HAZARD Children have STRANGLED in cords. NEVER attempt to use cord without the protective covering. Check protective covering before each use to ensure that the cord is not exposed to your child. Immediately discontinue use if protective covering is damaged or broken. This device is designed for indoor use only. This device is designed to be used behind a standard crib and against the wall only. Use only the AC power supply included with your Pxierra Ai baby monitor. Adult assembly is required. Keep small pa!s away from children when assembling. This product cannot replace adult supe"ision. Ensure your childs health by checking on him/her regularly. This product is not a toy. Do not allow children to play with it. Keep the device and power cord out of the reach of children a minimum of 3 ft (1m) away from the children;

3 Notice This device is designed for indoor use only. Install in accordance with building and installation codes and standards where your baby live;

This product is designed to be mounted behind a standard crib and against the wall only.Do not use it otherwhere;

This device id designed for newborn and childhood before 14 years old only;

Use only the AC power adapter and DC cord included in the packing box;

Keep the device and DC cord out of the reach of children and pets a minimum of 3 ft

(1m) away from the children;

Use only in temperatures between 40F and 113F. Do not block ai!low to the device;

Never use the device near water, including near bathtub, sink, laund" machine tube, wet basement, etc. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices that produce heat;

Please ensure that the device can be completely stationa" and not shaken during working, and avoid touching or wind blowing which may a#ect the stable state of the device during working;

Only use attachments and accessories speci$ed by the manufacturer and not cover it with anything. Unplug this device when unused for long periods of time;

Do not push any objects into the openings of the device unless consistent with the authorized operation of the device. Doing so can cause a $re or an electrical shock by sho%ing out interior components;

NEVER attempt to use cord without the protective covering. Do not install the equipment in a way that stretches or squeezes the DC cord;

Do not disassemble the device or attempt to se&ice it, it may expose you to dangerous high voltage or other risks. Opening a sealed component or product will void warranty. 4 Advises Use a !rm sleep su"ace. Do not put anything (pillows, blankets, stu#ed toys, or crib bumpers) anywhere babys sleep area. Babies should not sleep in an adult bed, on a couch, or on a chair alone, with you or anyone else. Babies should not sleep in swings, car seats, or carriers. Have your baby share your room, not your bed. Do not let your baby overheat during sleep. Do not use devices and products (wedges, positioners) that claim to reduce the risk of SIDS/SUID. There is no evidence to recommend swaddling as a strategy to reduce the risk of SIDS. Do not use home hea$ or breathing monitors to reduce the risk of SIDS. Do not smoke or let others smoke around your baby. Source from SAFE SLEEP VIRGINIA https://www.vdh.virginia.gov/safe-sleep/

#SafeSleepSnap For More Information about Safe Sleep for Your Baby: Reduce the Risk of Sudden Infant Death Syndrome (SIDS) and Other Sleep-Related Causes of Infant Death,check out:

https://safetosleep.nichd.nih.gov/resources/caregivers For More Information about how to build a safe sleep environment, check out:

https://safetosleep.nichd.nih.gov/modules/custom/sts_interactive_room/html/index.html or Scan the QR code to obtain the content of URL:

5 In the box Monitor Mount USB Cord Baby Monitor Crib Edge Grip Power Adapter Elbow Connector Floor Stand Leg Extension Tube Base Tube 6 What prepare by yourself Android Phone

/ iPhone /iPad WiFi Router 2.4G & 5G Tapeline

(3m/120inch) microSDHC UHS-I Not be used with Rocking Crib. This is a necessa! condition for safe sleep monitoring properly. The 32GB microSDHC card can roll store for about 7 days video playback, and the maximum capacity is 128GB, which for about 28 days video playback.Use with microSDHC card that meet UHS-I or higher to ensure compatibility. 32in/55in 0-8 months80cm(32in) monitor to crib sheet over 1 year old: 140cm(55in) monitor to crib sheet Follow the Safe Sleep`s recommended way of wearing Baby Onesies to sleep, for safe sleep and more e"ective moniting. No #ickering lights Stable ambient light, so that babies have comfo$ sleep and monitor work properly Do not put anything (pillows, blankets, stu"ed toys, or crib bumpers) anywhere babys sleep area. 7 Let`s Get Sta!ed Search and download the Android App or iOS App VitaRadar for Pxierra Ai baby monitor.

VitaRadar

Download the Vitaradar app and set up your account . Follow the in-app instructions to set up your Pxierra Ai Baby Monitor . You can choose to follow the assembly instructions in-app or in this booklet . Need Help Video Guidance www.pxierra.com Sent Message

@pxierra / @pxierrababymonitor Sent Email suppo!@pxierra.com Share your product sto" with us and your friends and family:

Earn rewards for each succesful referral Share baby sto" win a special gift 8 Installation Options Position the crib against the preferred wall with at least 5 inches (12.7cm) distance in the nurse!. In order to obtain the best viewing angle and comfo"able use experience, please mount up the Pxierra Ai Baby Monitor in the middle position behind the Crib, or determine the speci#c installation position of the device through the APP live preview. Notice: The power socket should be placed within 2m from the crib. 5 inches 9 Assemble stand, bottom to top. Follow the steps USB-C MONITOR MOUNT EXTENSION TUBE EXTENSION TUBE BASE TUBE CRIB EDGE GRIP ELBOW CONNECT FLOOR STAND LEG USB-A 10 Screw three FLOOR STAND LEGs and ELBOW CONNECT together. Then thread the TYPE-C end of the USB cable up through the hole in the center of the Elbow bottom. Push together the MOUNT to the BASE TUBE and second EXTENSION TUBE and RETRACTABLE TUBE. Then screw RETRACTABLE TUBE and ELBOW CONNECT together. 11 Push the USB cord through the rest of the EXTENSION TUBE in sequence, and mount them together by screwing the EXTENSION TUBE. Choose between three EXTENSION TUBEs or two EXTENSION TUBEs as instructed. First, inse! the USB-C plug rese"ed in the MOUNT into the USB-C socket inside the MONITOR neck, and then inse! the MONITOR and CORD back to the opening of the MOUNT together until the locking device of the MOUNT gives rebound feedback to complete the installation of the MONITOR. 12 The MONITOR installed on the MOUNT can be manually rotated 170 degrees from front to back and 170 degrees from left to right to position its orientation. The appropriate Angle needs to be adjusted according to the live stream screen in the VitaRadar APP. Please refer to the application introduction of the APP for speci#c methods. 170 170 Rotate AXIS HALO to reveal the position of the TF card slot, remove the TF card slot cover, inse! side B ve!ically upward into the TF card slot until the TF card is locked, and then restore the TF card slot cover to its original position.Do not power o" the device when operating the TF card. Side A Side B 13 Inse" the POWER ADAPTER into the power socket, and then inse" the USB-A plug into the USB-A socket of the POWER ADAPTER to power on and activate the entire device. During the installation of EXTENSION TUBE, CRIB EDGE GRIP is !tted into the EXTRA TUBE, or HOOK&LOOP is used to bind crib edge to the assembled FLOOR STAND, so as to prevent the FLOOR STAND from falling down. 14 Limited Warranty & Compliance The full information on Pxierras Limited Warranty visit: Pxierra.com/legal/warranty Pxierra, Inc. | Pxierra Ai baby monitor | Model No: TVD6003H This device complies with pa! 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful inte"erence, and

(2) this device must accept any inte"erence received, including inte"erence that may cause undesired operation. Any Changes or modi#cations not expressly approved by the pa!y responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to pa! 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inte"erence in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inte"erence to radio communications. However, there is no guarantee that inte"erence will not occur in a pa!icular installation. If this equipment does cause harmful inte"erence to radio or television reception, which can be determined by turning the equipment o$

and on, the user is encouraged to t% to correct the inte"erence by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit di$erent from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. CAUTION Any changes or modi#cations not expressly approved by the grantee of this device could void the user's authority to operate the equipment. RF EXPOSURE WARNING:

This equipment complies with FCC radiation exposure limits set fo!h for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. POWER ADAPTER WARNING The adapter shall be installed near the equipment and shall be easily accessible. 15 RF POWER SPECIFICATIONS Radio Frequency Max. Output Power 2.4G WiFi 2.4-2.4835 GHz 5G WiFi 5.15-5.25 GHz 5.725-5.850 GHz 23.09dBm 12.75dBm 12.61dBm POWER SUPPLY INFORMATION Input Voltage Input AC frequency Output Voltage Output Current Output Power 100-240V 50-60Hz 5 V 1.0-2.1 A 11W Average active e!ciency E!ciency at 10%load No load power consumption 83.65%

80 .60%

0 .0033W 16

C5266091_X10_Ed.2 Pxierra Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2A7F7GYXSL-TVD6003H To Whom It May Concern, Date: 2022-08-02 Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No NOTE 1 NOTE 1 No No Short-Term Confidentiality NOTE 2 No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of above are withheld from public view for a period of Grant of Equipment Authorization and prior to marketing. short-term Confidentiality, the applicant requests the exhibits selected days from the date of the It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, 1/1 C5266091_X10_Ed.2 Signature:

Name:Daniel Lee Title:General Manager 1/1

Declaration on model difference We, Pxierra Limited, the undersigned hereby confirm that these models are identical, and all models have the same RF module and Antenna,In addition to the appearance of the grain, color and model are different, the appearance of the shape and material are the same. Product name Pxierra Ai Baby Monitor Model No. TVD6003H,TVD6004H,TVD6005H,TVD6006H,TVD6007H,TVD6008H Trade name N/A FCC ID INPUT 2A7F7GYXSL-TVD6003H 100-240V~50/60Hz 0.45A Confirmed by:

Clients signature:

Clients name / title: Daniel Lee/General Manager Date:2022-08-02 Page 1 of 1

C5266091_X8_Ed.1 Letter of Authorization Pxierra Limited Company: Pxierra Limited Address: A504, Qilin Maker Town, No.41 liupanshui Road, National High-tech Industrial Development Zone, Guiyang, Guizhou, China Product Name: Pxierra Ai Baby Monitor Model Number:

TVD6003H,TVD6004H,TVD6005H,TVD6006H,TVD6007H,TVD6008H FCC Identifier: 2A7F7GYXSL-TVD6003H We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Daniel Lee Date: 2022-08-02 Title: General Manager Signature of applicant:

1/1

Pxierra Limited C5266091_X13_Ed.1 FCC Software Configuration Control Declaration Date: 2022-08-02 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. Product/ Model Number: Pxierra Ai Baby Monitor TVD6003H,TVD6004H,TVD6005H,TVD6006H,TVD6007H,TVD6008H Regarding FCC Country Code Selection guidelines identified in KDB 594280. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Signatureofapplicant:

Name: Daniel Lee Title: General Manager 1/1