FCC ID: 2A33X-S11 Tablet

S11 Tablet PC Instructions Qianxun AG v1.1 2024/11/15 Product Specifications Screen Brightness Systems Communications and interfaces Power input 10.1-inch LCD (1024*600PX) 750nits Android 11 3G/4G, WiFi (2.4G), BT (4.2) 9~36V Product Installation 1. Plug the power switch in the square hole of the switch bracket, and use 4 M6 * 10 bolts to fix the ball head of the power switch bracket and the RAM bracket on the back of the display screen;

2. The ball head of the RAM bracket at the other end can be fixed at the driver's convenient position with U-shaped bolt or self-tap. If not well installed, please fix the ball support to the A-pillar or front window metal crossbar with self-tap) 3. Connect the ball heads at both ends of the RAM bracket and select an convenient position to fix the RAM directly. 4. Connect the plate and the RAM bracket for assembly, and tighten the ball heads between the RAM for fixing. Definitions of Connector Interface Serial number Definition Serial number Definition 1 B+

14 RS232_A_TX/ADC_IN3/ADC_IN3 2 3 4 5 6 7 8 9 10 11 12 13 B-

ACC CAN1H CAN1L OUTPUT1 OUTPUT2/AUDIOLINEOUT GND RS485-A/INPUT4 RS485-B/INPUT3 CAN2H CAN2L 15 INPUT2/ADC_IN2/ADC_IN2/PHY_MDI_ 2+

16 CAMERA_1 17 RS232_B_RX/OUTPUT5/PHY_MDI_3-

18 PHY_MDI_1-/CAN4_L 19 PHY_MDI_0-/CAN3_L 20 21 RS232_A_RX/ADC_IN4/ADC_IN4/INPU TS INPUT1/ADC_IN1/ADC_IN1/PHY_MDI_ 2-

22 CAMERA_0 23 CAMERA_12V 24 RS232_B_TX/OUTPUT4/PHY_MDI_3+

25 PHY_MDI_1+/CAN4_H OUTPUT3/UM_1PPS 26 PHY_MDI_0+/CAN3_H S11 is connected to a computer. S11 only supports USB 2.0, so a USB 2.0 cable must be used to connect the PC and the tablet. A USB 2.0 male-to-male debug cable is recommended. FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Caution!

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

S15 Tablet PC Instructions Qianxun AG v1.1 5 2024/11/1 Product Specifications Screen Brightness Systems Communications and interfaces Power input 10.1-inch LCD (1024*600PX) 750nits Android 11 3G/4G, WiFi (2.4G), BT (4.2) 9~36V Product Installation 1. Plug the power switch in the square hole of the switch bracket, and use 4 M6 * 10 bolts to fix the ball head of the power switch bracket and the RAM bracket on the back of the display screen;

2. The ball head of the RAM bracket at the other end can be fixed at the driver's convenient position with U-shaped bolt or self-tap. If not well installed, please fix the ball support to the A-pillar or front window metal crossbar with self-tap) 3. Connect the ball heads at both ends of the RAM bracket and select an convenient position to fix the RAM directly. 4. Connect the plate and the RAM bracket fo3r assembly, and tighten the ball heads between the RAM for fixing. Definitions of Connector Interface Serial number Definition Serial number Definition 1 B+

14 RS232_A_TX/ADC_IN3/ADC_IN3 2 3 4 5 6 7 8 9 10 11 12 13 B-

ACC CAN1H CAN1L OUTPUT1 OUTPUT2/AUDIOLINEOUT GND RS485-A/INPUT4 RS485-B/INPUT3 CAN2H CAN2L OUTPUT3/UM_1PPS 15 INPUT2/ADC_IN2/ADC_IN2/PHY_MDI_ 2+

16 CAMERA_1

17 RS232 B RX/OUTPUT5/PHY_MDI_3 _ _ 18 19 20 21 _ PHY MDI 1-/CAN4_ _ L _ PHY MDI 0-/CAN3_ _ L _ _ RS232 A RX/ADC_IN4/ADC_IN4/INP TS U INPUT1/ADC_IN1/ADC_IN1/PHY_MDI_ 2-

22 CAMERA_0 23 CAMERA 12_ V

24 RS232 B TX/OUTPUT4/PHY_MDI_3 _ _ 25 26 _ PHY MDI 1+/CAN4_ _ H _ PHY MDI 0+/CAN3_ _ H S15 is connected to a computer. S15 only supports USB 2.0, so a USB 2.0 cable must be used to connect the PC and the tablet. A USB 2.0 male-to-male debug cable is recommended. FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Caution!

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Qianxun Spatial Intelligence(Zhejiang) Inc. Name: Tablet IP65 Input:9-36VDC Model: S11 Address:No.1,Building 12,Area C,Deqing Geographic Info Town,Wuyang Street,Deqing County,Huzhou City, Zhejiang Province,China [email protected] www.qxwz.com oe Fe rss f & FAL Contains FCC ID:xMRz01902EG256 occ ID2A33X811 Qianxun SI MADE IN CHINA

Qianxun Spatial Intelligence (Zhejiang) Inc. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 11-22-2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2A33X-S11 Qianxun Spatial Intelligence(Zhejiang) Inc. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely,

(Applicant signature) Yong Zhou yor Dho. Rev 1/26/2023 Qianxun Spatial Intelligence (Zhejiang) Inc. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 11-22-2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Fi FCC ID: 2A33X-S11 Qianxun Spatial Intelligence (Zhejiang) Inc. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Qianxun Spatial Intelligence (Zhejiang) Inc. (the applicant) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-

886 and KDB 986446 DO1 Covered Equipment Guidance section B(2a). Sincerely,

(Applicant signature) Yong Zhou lm Zao Rev 1/26/2023

Qianxun Spatial Intelligence(Zhejiang) Inc. Declaration of Authorization We Name: Qianxun Spatial Intelligence(Zhejiang) Inc. Address: No.1,Building12,Area C,Deqing Geographic Info Town, Wuyang Street,Deqing County, Huzhou City,Zhejiang Province, China Declare that:

Name Representative of agent: Ms. Rose Liu Agent Company name: BTL Inc. Address: No.3,Jinshagang 1st Road, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification of the following product(s) and signing all the related documents including 731 forms:

Product description: Tablet Type designation: S11 Trademark: Qianxun SI FCC ID: 2A33X-S11 on our behalf. Date:2024-11-22 City: Huzhou City Name: Yong Zhou Function: Senior Test Specialist Signature:

Qianxun Spatial Intelligence (Zhejiang) Inc. No.1,Building12,Area C,Deqing Geographic Info Town,Wuyang Street, Deqing County, Huzhou City,Zhejiang Province, China Date: 11/22/2024 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2A33X-S11 US Agent Attestation Statement / Part 2.911(d)(7) Qianxun Spatial Intelligence (Zhejiang) Inc. certifies, that as of 11/22/2024, we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2A33X-S11. Qianxun Spatial Intelligence ieien ) Inc. accepts to maintain an agent of service of process in the United States for no less than one year after either the pramiee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the omerion of being the Gesignated eget ie mA i ose of accepting service of process on behalf of Qianxun Spatial Intelligence (Zhejiang) Inc. for Designated Agent Information:

Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: Qianxun Spatial Intelligence (Zhejiang) Inc. FRN: 0031678618 Designated Agent: FCC US Agent, LLC Company Representative: Yong Zhou Designated Agent Representative: Tim Payne Signature: ( gd x home.. Signature:

Qianxun Spatial Intelligence(Zhejiang) Inc. Wi-Fi Channel 12 and 13 Declaration Letter Date: 2024-11-22 We, the undersigned company Company Name: Qianxun Spatial Intelligence(Zhejiang) Inc. Address: No.1,Building12,Area C,Deqing Geographic Info Town, Wuyang Street, Deqing County, Huzhou City,Zhejiang Province, China Declare that:

Product description: Tablet Type designation: S11 Brand: Qianxun SI FCC ID: 2A33X-S11 Only channels 1~11 will be used in USA. Country code selection is disabled. If you have any questions regarding the authorization, please do not hesitate to contact us, thank you~

Sincerely, Name: Yong Zhou Tel: +86-18682098095 Email: [email protected]