app
s
|
Applicant Information
|
|
1 2
|
Effective |
2024-03-06
|
1 2
|
Applicant's complete, legal business name |
Qingdao Intelligent&Precise Electronics Co.,Ltd
|
1 2
|
FCC Registration Number (FRN) |
0025785783
|
1 2
|
Physical Address |
No218,Qianwangang Road
|
1 2
|
266071
|
1 2
|
Qingdao, N/A 266071
|
1 2
|
China
|
|
app
s
|
TCB Information
|
1 2
|
TCB Application Email Address |
b******@phoenix-testlab.de
|
1 2
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2
|
Grantee Code |
2AJVQ
|
1 2
|
Equipment Product Code |
MWH541B
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2
|
Name |
H******** W****
|
1 2
|
Title |
Certification Engineer
|
1 2
|
Telephone Number |
13381********
|
1 2
|
Fax Number |
05328********
|
1 2
|
E-mail |
w******@hisense.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
1 2 | DTS - Digital Transmission System |
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WiFi Module |
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 | Modular Equipment Type | Single Modular Approval |
1 2 | Purpose / Application is for | Original Equipment |
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 | Grant Comments | Output power is maximum average conducted.
This device supports IEEE 802.11 a/n/ac 20, 40 and 80 MHz channel bandwidths.
This device has integrated DSS, DTS and NII transmitters certified under the same
FCC ID.
This device supports 2T2R MIMO.
Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20cm from
all persons and must not be co-located or operating in conjunction with any other
antenna or transmitter. Approval is limited to OEM installation only. OEM
integrators must be provided with antenna installation instructions. OEM integrators
and end-users must be provided with transmitter operating conditions for satisfying
RF exposure compliance. This grant is valid only when the device is sold to OEM
integrators and the OEM integrators are instructed to ensure that the end user has
no manual instructions to remove or install the device. Only the antenna(s) listed in
this filing can be used with this device. Use of additional antenna(s) are subject to
the requirements of 15.204(c)(4).
The host integrator installing this module into their product must ensure that the
final composite product complies with the FCC requirements by a technical
assessment or evaluation to the FCC rules, including the transmitter operation and
should refer to guidance in KDB 996369. |
1 2 | Output power is maximum peak conducted.
This device supports WIFI 802.11 b/g/n20 and 40 MHz channel bandwidth.
This device has integrated DSS, DTS and NII transmitters certified under the
same FCC ID.
This device supports 2T2R MIMO.
Modular Approval for mobile RF Exposure conditions, the antenna(s) used for
this transmitter must be installed to provide a separation distance of at least
20cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter. Approval is limited to OEM installation
only. OEM integrators must be provided with antenna installation instructions.
OEM integrators and end-users must be provided with transmitter operating
conditions for satisfying RF exposure compliance. This grant is valid only when
the device is sold to OEM integrators and the OEM integrators are instructed to
ensure that the end user has no manual instructions to remove or install the
device. Only the antenna(s) listed in this filing can be used with this device.
Use of additional antenna(s) are subject to the requirements of 15.204(c)(4).
The host integrator installing this module into their product must ensure that the
final composite product complies with the FCC requirements by a technical
assessment or evaluation to the FCC rules, including the transmitter operation
and should refer to guidance in KDB 996369. |
1 2 | Is there an equipment authorization waiver associated with this application? | No |
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2
|
Firm Name |
The State Radio_monitoring_center Testing Center
|
1 2
|
Name |
S****** Y******
|
1 2
|
Telephone Number |
+86-1********
|
1 2
|
E-mail |
s******@srtc.org.cn
|
|