companies    

FCC ID: 2AJVQ-ZDGF7668AU Wireless Module

by: Qingdao Intelligent&Precise Electronics Co.,Ltd latest update: 2021-02-18 model: ZDGF7668AU

Nine grants have been issued under this FCC ID from 12/28/2017 to 02/18/2021 (this is one of seventeen releases in 2021 for this grantee). Public details available include internal & external photos, frequency information, and manuals. some products also feature user submitted or linked password defaults, troubleshooting guides, drivers, warrantee terms, & instructions.
permalink for this FCC identifier
search for: Repair details
from iFixIt
 Replacement
on Amazon
 Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
all frequencies exhibits applications
manual photo
app s submitted / available
1 2 3 4 5 6 7 8 9 User manual Rev 1 Users Manual pdf 624.78 KiB
1 2 3 4 5 6 7 8 9 External Photo-ed1 External Photos pdf 157.85 KiB February 18 2021
1 2 3 4 5 6 7 8 9 Cover Letter-FCC PC II Cover Letter(s) pdf 196.45 KiB February 18 2021
1 2 3 4 5 6 7 8 9 FCC-Authority-Letter Cover Letter(s) pdf 22.47 KiB February 18 2021
1 2 3 4 5 6 7 8 9 Report 15.247-C2PC-ed1 Test Report pdf 1.64 MiB February 18 2021
1 2 3 4 5 6 7 8 9 Test Setup Photos-ed1 Test Setup Photos pdf 199.67 KiB February 18 2021
1 2 3 4 5 6 7 8 9 Report 15.407-5G WiFi-ed1 Test Report pdf 4.77 MiB February 18 2021
1 2 3 4 5 6 7 8 9
Attestation Statements pdf August 10 2019 / October 10 2019
1 2 3 4 5 6 7 8 9 External photos External Photos pdf 310.99 KiB August 10 2019 / October 10 2019
1 2 3 4 5 6 7 8 9
Cover Letter(s) pdf August 10 2019 / October 10 2019
1 2 3 4 5 6 7 8 9 Internal photos Internal Photos pdf 196.53 KiB August 10 2019 / October 10 2019
1 2 3 4 5 6 7 8 9
ID Label/Location Info pdf August 10 2019 / October 10 2019
1 2 3 4 5 6 7 8 9
Test Report pdf August 10 2019 / October 10 2019
1 2 3 4 5 6 7 8 9
Test Setup Photos pdf August 10 2019 / October 10 2019
1 2 3 4 5 6 7 8 9
Test Report pdf August 10 2019 / October 10 2019
1 2 3 4 5 6 7 8 9
Attestation Statements pdf
1 2 3 4 5 6 7 8 9
External Photos pdf
1 2 3 4 5 6 7 8 9
Test Report pdf
1 2 3 4 5 6 7 8 9
Cover Letter(s) pdf
1 2 3 4 5 6 7 8 9
Cover Letter(s) pdf
1 2 3 4 5 6 7 8 9
Internal Photos pdf
1 2 3 4 5 6 7 8 9
ID Label/Location Info pdf
1 2 3 4 5 6 7 8 9
Cover Letter(s) pdf
1 2 3 4 5 6 7 8 9
RF Exposure Info pdf
1 2 3 4 5 6 7 8 9
Test Report pdf
1 2 3 4 5 6 7 8 9
Test Report pdf
1 2 3 4 5 6 7 8 9
Test Report pdf
1 2 3 4 5 6 7 8 9
Test Report pdf
1 2 3 4 5 6 7 8 9
Test Setup Photos pdf
1 2 3 4 5 6 7 8 9
Test Report pdf
1 2 3 4 5 6 7 8 9
Test Report pdf
1 2 3 4 5 6 7 8 9
Attestation Statements pdf
1 2 3 4 5 6 7 8 9
Test Report pdf
1 2 3 4 5 6 7 8 9
Test Report pdf
1 2 3 4 5 6 7 8 9
Test Report pdf
1 2 3 4 5 6 7 8 9
Test Report pdf
1 2 3 4 5 6 7 8 9
Test Report pdf
1 2 3 4 5 6 7 8 9
Test Report pdf
1 2 3 4 5 6 7 8 9
Test Report pdf
1 2 3 4 5 6 7 8 9
Test Report pdf
1 2 3 4 5 6 7 8 9 User manual Rev 1 Users Manual pdf 624.78 KiB
1 2 3 4 5 6 7 8 9 External Photo-ed1 External Photos pdf 157.85 KiB February 18 2021
1 2 3 4 5 6 7 8 9 Cover Letter-FCC PC II Cover Letter(s) pdf 196.45 KiB February 18 2021
1 2 3 4 5 6 7 8 9 FCC-Authority-Letter Cover Letter(s) pdf 22.47 KiB February 18 2021
1 2 3 4 5 6 7 8 9 Report 15.247-C2PC-ed1 Test Report pdf 1.64 MiB February 18 2021
1 2 3 4 5 6 7 8 9 Test Setup Photos-ed1 Test Setup Photos pdf 199.67 KiB February 18 2021
1 2 3 4 5 6 7 8 9 Report 15.407-5G WiFi-ed1 Test Report pdf 4.77 MiB February 18 2021
1 2 3 4 5 6 7 8 9 External photos External Photos pdf 310.99 KiB August 10 2019 / October 10 2019
1 2 3 4 5 6 7 8 9 Internal photos Internal Photos pdf 196.53 KiB August 10 2019 / October 10 2019

frequency equipment class purpose
1 2021-02-18 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
2 2412 ~ 2462 DTS - Digital Transmission System
3 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
4 2019-10-10 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
5 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
6 2412 ~ 2462 DTS - Digital Transmission System
7 2017-12-28 2412 ~ 2462 DTS - Digital Transmission System Original Equipment
8 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
9 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX

Application Forms

app s Applicant Information
1 2 3 4 5 6 7 8 9 Effective 2021-02-18
1 2 3 4 5 6 7 8 9 2019-10-10
1 2 3 4 5 6 7 8 9 2017-12-28
1 2 3 4 5 6 7 8 9 Applicant's complete, legal business name Qingdao Intelligent&Precise Electronics Co.,Ltd
1 2 3 4 5 6 7 8 9 FCC Registration Number (FRN) 0023954829
1 2 3 4 5 6 7 8 9 0025785783
1 2 3 4 5 6 7 8 9 Physical Address No218,Qianwangang Road Qingdao Economic&Technological Development Zone
1 2 3 4 5 6 7 8 9 No218,Qianwangang Road
1 2 3 4 5 6 7 8 9 266071
1 2 3 4 5 6 7 8 9 Qingdao, N/A
1 2 3 4 5 6 7 8 9 Qingdao, N/A 266071
1 2 3 4 5 6 7 8 9 China
app s TCB Information
1 2 3 4 5 6 7 8 9 TCB Application Email Address h******@acbcert.com
1 2 3 4 5 6 7 8 9 TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
1 2 3 4 5 6 7 8 9 Grantee Code 2AJVQ
1 2 3 4 5 6 7 8 9 Equipment Product Code ZDGF7668AU
app s Person at the applicant's address to receive grant or for contact
1 2 3 4 5 6 7 8 9 Name C****** L******
1 2 3 4 5 6 7 8 9 Title Engineer
1 2 3 4 5 6 7 8 9 Telephone Number 53280********
1 2 3 4 5 6 7 8 9 Fax Number 53286********
1 2 3 4 5 6 7 8 9 E-mail l******@hisense.com
app s Technical Contact
1 2 3 4 5 6 7 8 9 Firm Name Intertek Testing Services Shanghai
1 2 3 4 5 6 7 8 9 Name E****** L********
1 2 3 4 5 6 7 8 9 E****** L****
1 2 3 4 5 6 7 8 9 N****** L****
1 2 3 4 5 6 7 8 9 Physical Address Building No.86, 1198 Qinzhou Road(North)
1 2 3 4 5 6 7 8 9 Shanghai, 200233
1 2 3 4 5 6 7 8 9 China
1 2 3 4 5 6 7 8 9 Telephone Number 86 21********
1 2 3 4 5 6 7 8 9 86-21********
1 2 3 4 5 6 7 8 9 86 21********
1 2 3 4 5 6 7 8 9 Fax Number 021 5********
1 2 3 4 5 6 7 8 9 86-21********
1 2 3 4 5 6 7 8 9 86 21********
1 2 3 4 5 6 7 8 9 E-mail e******@intertek.com
1 2 3 4 5 6 7 8 9 n******@intertek.com
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
1 2 3 4 5 6 7 8 9 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
1 2 3 4 5 6 7 8 9 Yes
1 2 3 4 5 6 7 8 9 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 5 6 7 8 9 Is this application for software defined/cognitive radio authorization?No
1 2 3 4 5 6 7 8 9 Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
1 2 3 4 5 6 7 8 9 DTS - Digital Transmission System
1 2 3 4 5 6 7 8 9 NII - Unlicensed National Information Infrastructure TX
1 2 3 4 5 6 7 8 9 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Wireless Module
1 2 3 4 5 6 7 8 9 ZDGF7668AU-F
1 2 3 4 5 6 7 8 9 ZDGFMT7668AU
1 2 3 4 5 6 7 8 9 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
1 2 3 4 5 6 7 8 9 Modular Equipment TypeSingle Modular Approval
1 2 3 4 5 6 7 8 9 Purpose / Application is forClass II Permissive Change
1 2 3 4 5 6 7 8 9 Original Equipment
1 2 3 4 5 6 7 8 9 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 3 4 5 6 7 8 9 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 4 5 6 7 8 9 Grant CommentsThis is a C2PC application. Power Output listed is Conducted. Modular Approval. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. This device also contains BLE, WLAN 2.4GHz and WLAN 5GHz transmitter.
1 2 3 4 5 6 7 8 9 This is a C2PC application. Power Output listed is Conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be colocated with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. This device has 20 MHz and 40 MHz bandwidth modes. This device also contains BT and 5GHz WLAN transmitter.
1 2 3 4 5 6 7 8 9 This is a C2PC application. Power Output listed is Conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be colocated with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device also contains BT, BLE, and WLAN 2.4GHz transmitter.
1 2 3 4 5 6 7 8 9 Power Output listed is Conducted. Modular Approval. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. This device also contains BLE, WLAN 2.4G and WLAN 5G transmitter. C2PC application with some components changed as documented in this filing. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.
1 2 3 4 5 6 7 8 9 Power Output listed is Conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be colocated with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device also contains BT, BLE, and WLAN 2.4G transmitter. C2PC application with some components changed as documented in this filing. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.
1 2 3 4 5 6 7 8 9 Power Output listed is Conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be colocated with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. This device has 20 MHz and 40 MHz bandwidth modes. This device also contains BT and 5G WLAN transmitter. C2PC application with some components changed as documented in this filing. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.
1 2 3 4 5 6 7 8 9 Power Output listed is Conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee This device has 20 MHz and 40 MHz bandwidth modes. This device also contains BT and 5G WLAN transmitter.
1 2 3 4 5 6 7 8 9 Power Output listed is Conducted. Modular Approval. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee This device also contains BLE, WLAN 2.4G and WLAN 5G transmitter.
1 2 3 4 5 6 7 8 9 Power Output listed is Conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device also contains BT, BLE, and WLAN 2.4G transmitter.
1 2 3 4 5 6 7 8 9 Is there an equipment authorization waiver associated with this application?No
1 2 3 4 5 6 7 8 9 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 4 5 6 7 8 9 Firm Name Intertek Testing Services Shanghai
1 2 3 4 5 6 7 8 9 Intertek Testing Services Limited, Shanghai
1 2 3 4 5 6 7 8 9 Name L**** X****
1 2 3 4 5 6 7 8 9 Telephone Number +86 2********
1 2 3 4 5 6 7 8 9 E-mail l******@intertek.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402 2480 0.003
2 2 15C CC MO 2412 2462 0.033
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E 38 CC MO 5180 5240 0.024
3 2 15E 38 CC MO ND 5260 5320 0.022
3 3 15E 38 CC MO ND 5500 5700 0.022
3 4 15E 38 CC MO 5745 5825 0.04
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E 38 CC MO 5180 5240 0.024
5 2 15E 38 CC MO ND 5260 5320 0.024
5 3 15E 38 CC MO ND 5500 5700 0.029
5 4 15E 38 CC MO 5745 5825 0.042
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402 2480 0.003
6 2 15C CC MO 2412 2462 0.035
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402 2480 0.003
7 2 15C CC MO 2412 2462 0.035
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15E 38 CC MO 5180 5240 0.024
9 2 15E 38 CC MO ND 5260 5320 0.024
9 3 15E 38 CC MO ND 5500 5700 0.029
9 4 15E 38 CC MO 5745 5825 0.042

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC