FCC ID: 2BFDF-G50S Thunderobot gamepad

,,, 10C~35C,-10C +40C 2 3 4 5 6() 7 LS Switch ThunderobotG50S G50/G35 PCIOSSWITCH 4Windows XHOME 323 Windows Xbox Wireless Controller 23 HOME1 Windows 5iOS/

XHOME3 23iOS/

Xbox Wireless Controller 23 iOS MFl 6Switch Switch SHOME 3 4HOMEABXY Switch Switch 7/TV//

DHOME3 34 G50S 34HID 82.4G Dongle/Switch/

2.4GDongleDongle 2.4GHOME3 Windows-PC//SwitchUSB LED RS 2.4G

SSwitchBACK START MODEMODE 1*1 21M USB-C*1 32.4G Dongle*1 4//*1 1Windows-PC USBUSBPC 12Xinput PCPCXinputMODE 5XinputDinputSwitchSwitch Steam 2Switch SwitchPro Switch USBUSB Switch SwitchABXYSwitch 3//TV USB-CUSB LED2, TVHID M6 M5

1PCSWITCH LED2+LED3 LED2+LED3 LED3+LED4 LED3+LED4 8 2.4G

Windows-PC(Xinput) /TV/(Dinput) Nintendo Switch USB 2.0/3.0 USB 2.0/3.0 USB2.0 Xbox Wireless Controller TURBO G50S Pro Controller 8 TURBO MODEDinput MODEXinput

NS Dinput5+LED1+LED3 OTG Dinput Xinput5+LED1+LED2 NS5+LED1

*4 Nintendo SwitchUSB2.0USB 3.0

*5 SWITCH

*6 MODE 2PCIOSSWITCH X-2.4G-S-DPC/PC 2.4G/SWITCH/

Android HOME3 XWindows-PC iOS

(Xinput) D(

)(Dinput) SNintendo Switch 2.4GWindows-PC 2.4 G-2.4GXinput/Din put/NS Bluetooth2.1 Bluetooth2.1 Bluetooth2.1 Bluetooth2.1 Xxinput HOME 3S DAndroid HOME 3S S-NS HOME 3S 2.4G HOME 3S HOME

HOME

HOME

HOME

1)5 2) 5 3) 5 0%25%50%75%

100%(A/B/XY)75%

4)5S/

5):

1)51 100%2 75% 50%4 25%575%

2)15

:,1 100%LED1-LED42 75%LED2-LED4 5 3) 1M1/M2/M3/M4/M5/M6 2 M1 M4 M2 M5 M3 M6 3 A,B,X,Y,LB,LT,LS,RB,RT,RS M1

/M2/M3/M4/M5/M6 4 I.MODE+ M1/M2/M3/M4/M5/M6 3S II. III.M1/M2/M3/M4/M5/M6 5 6XinputDinputSwitchAndroid 7 8M5+M6 10S TURBO MODE+TURBO 3S TURBO M1M6 MODE+M1M6 3S MODE++

M1M6 M5+M6 10S M1M6

TURBO

(RESET) 1TURBOTURBO TU RBO 2TURBOTURBO TURBOTURBO TURBO 3TURBOABXYLBLTRBRT BACKSTARTM1M6 4 5MODE+TURBO3STURBO 6TURBOTURBO+/

TURBO/ 5HZ10HZ15HZ 10HZ

0 BACK+START 5 0 BACK+START+

5 0 BACK+START+

5 MODE+

MODE+

TURBO+

3 TURBO TURBO+ABXY//M1 M6

/0 3%

TURBO TURBO TURBO 1 RESET 2RESET 3RESET 4RESET//

2 1ALPS 12 A/B/X/Y LB/RB/ LT/RT BACK(SELECT/-) START(+) LS/RS LS/RSLT/RT 6 HOME/TURBO/MODE ///

6M1/M2/M3/M4/M5/M6 2:

NSNS 1BACK+HOME1234 2START3 3 LT/RT 2-3 4 3D 2-3 5START 1 2 3 4 5 6 7 Restore the factory settings for TURBO functio Set programming keys M1M6 Restore the factory settings for programming keys M1M6 Press and hold MODE+TURBO for 3 seconds Clear all the TURBO functions that have been set. Press and hold MODE+programming keys M1M6 for 3 seconds After long-pressing the combination of MODE and programming keys, the controller will vibrate and the purple LED ring will stay on, indicating that it is currently recording the programmed keys. Press the programmed key again to end the recording. Programming keys support single key mapping and macro instructions. Press and hold M5+M6 keys for 10 seconds Restore the macro programming keys M1M6 to the factory default values. Resetting the Controller (RESET) 1) If the controller is unresponsive or experiences other abnormal issues during operation, you can reset the controller. 2) Use a paperclip or toothpick to insert into the RESET hole on the back of the controller until you hear a "click" sound, indicating that the power to the controller has been turned o and the reset is successful. 3) In addition, if rmware upgrade fails, you can also try resetting the controller and then attempting again. 4) Resetting will not delete any settings information in the controller (macro programming/vibration level/backlight brightness). CURRENT REFERENCE CURRENT Sleep current Paring current Working current Dual motor vibra current ELECTRICAL SPECIFICATION POWER SUPPLY Battery capacity Charging method Charging voltage Built-in Li-battery Battery Life 600 mAh TYPE-C 5V Charging time Charging current 10 hrs

<= 3 hrs 530 mA (MAX) FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

SECURITY INFORMATION I. LAYOUT BEFORE USING AND OPERATING THE EQUIPMENT, PLEASE READ AND FOLLOW THE PRECAUTION BELOW TO ENSURE THAT THE EQUIPMENT IS PERFORMING BEST AND TO AVOID DANGEROUS OR ILLEGAL SITUATIONS. 1. Please use this device within a temperature range of 0C to 40C and store the device and its accessories within a temperature range of -10C to +40C. Extreme high or low temperatures may cause device malfunctions. 2. This device and its accessories may contain small parts, please keep them out of reach of children. Children may unintentionally damage the device and its accessories, or swallow small parts leading to choking or other dangers. 3. Please avoid exposing the device and its accessories to rain or moisture, as it may cause re or electric shock hazards. 4. Please keep the device and its batteries away from heat sources, high temperatures, and direct sunlight. Prohibit throwing the batteries into re, dismantling, dropping, squeezing, or modifying the batteries, prohibiting foreign objects from being inserted or puncturing the batteries, and prohibit immersing the batteries in water or other liquids, to avoid external impact and pressure on the batteries, in order to prevent battery leakage, overheating, re, or explosion. 6. Do not dismantle or modify the device (including replacing the built-in battery) and accessories without authorization, otherwise, the device and accessories will not be covered by our company's warranty. 7. Please dispose of this device, batteries, and other accessories according to local regulations. Do not treat them as household waste. Improper battery disposal may lead to battery explosion. Left joystick LS (press) D-pad Channel indicator

(LED1/LED2/

LED3/LED4) HOME button ABXY buttons Right joystick RS (press) Backlit button Vibration button 2.4G Mode switch Button layout in Switch mode:

- button

+ button X button

*NOTES:In Switch mode, the - key corresponds to the BACK button, the + key corresponds to the START button, and the MODE button corresponds to the screenshot button. Long press the MODE button to activate the recording function. II. PACKING AND ACCESSORIES GAMEPAD *1, USB CABLE *1, USER MANUAL *1, 2.4G DONGLE *1 Y button A button III. GAMEPAD FUNCTIONS TURBO button Capture button B button 8 9 M6 M5 10 V.SPECIAL INSTRUCTIONS All information provided in this manual is accurate and reliable. The company assumes no responsibility for any consequences caused by unauthorized operations and usage. If there are unpreventable factors such as ocial system updates, game updates, or changes in game platforms that result in the inability to connect or operate certain games, the company will assist in resolving these abnormal issues. The company reserves the right to provide the nal interpretation. If there are any changes to the specications mentioned in this manual, a written explanation will be provided. This manual supersedes all previous information provided.

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. 17 18 19 20 21 22 23 24 25 4. Bluetooth connection to Windows PC:

When the controller is powered o, set the switch on the back of the controller to the "X" position, then press and hold the HOME button on the controller for about 3 seconds until the 2nd and 3rd channel indicator lights on the controller ash rapidly, indicating pairing mode. On the Windows PC, open the Settings and go to "Bluetooth & other devices" to add a Bluetooth device. Find and click on "Xbox Wireless Controller" in the list of Bluetooth devices. Once connected, the 2nd and 3rd channel indicator lights on the controller will stay on, indicating successful pairing. The controller has Bluetooth memory function. When used next time, simply press the HOME button for 1 second to wake up the controller, and it will automatically reconnect to the previously paired Windows PC. 5. Bluetooth connection to iOS/Android mobile devices:

When the controller is powered o, set the switch on the back to the "X" position, then press and hold the HOME button on the controller for about 3 seconds to enter pairing mode. During pairing, the 2nd and 3rd channel indicator lights on the controller will ash rapidly. Open the Bluetooth settings on the iOS/Android device and search for the Bluetooth device named "Xbox Wireless Controller". Click to pair, and once connected, the 2nd and 3rd channel indicator lights on the controller will stay on, indicating successful connection.

Only supports iOS MFi games and native Android controller games.

This mode supports some car stereo systems. 6. Bluetooth connection to Switch console:

Initial connection to the console: On the main menu of the Switch console, select

"Controllers" and click on "Change Grip/Order" to enter pairing mode.

When the controller is powered o, set the switch on the back to the "S" position, then press and hold the HOME button on the controller for about 3 seconds until the channel indicator lights on the controller ash rapidly, indicating search mode. Once paired, the 4th channel indicator light on the controller will stay on. Press the HOME button to return to the main menu for operation. In this mode, the ABXY characters and Switch operations are reversed.

Bluetooth connection to Switch console supports one-touch wake-up and native six-axis gyroscope. 7. Bluetooth connection to Android/TV/projector/emulator devices:

When the controller is powered o, set the switch on the back to the "D" position, then press and hold the HOME button on the controller for about 3 seconds to enter pairing mode. The 3rd and 4th channel indicator lights on the controller will ash rapidly. Open the Bluetooth settings on the Android device, search for the Bluetooth device named "G50S", and click to pair. Once connected, the 3rd and 4th channel indicator lights on the controller will stay on. The controller will enter Android HID standard mode, but does not support virtual touch game operations.

This mode supports some car stereo systems. 8. 2.4G dongle connection to PC/Switch/Android devices:

Only supports connecting with the dongle receiver in the 2.4G mode. The dongle receiver can automatically identify and match devices and protocols.

Set the switch on the back of the controller to the 2.4G position, then press and hold the HOME button on the controller for about 3 seconds until the channel indicator lights on the controller start ashing rapidly in a back and forth pattern, indicating pairing mode.

Insert the receiver into the USB port of the Windows PC/Android/Switch device. The receiver's LED indicator will slowly ash.

Keep the controller close to the receiver and wait for automatic recognition and connection. Once connected, the receiver's indicator light will stay on, and the channel indicator lights on the controller will stay on according to the connected protocol.

This mode supports some car stereo systems. 1. Wired connection to Windows PC Connect the controller to the USB port on the computer using a USB data cable. The controller will automatically connect to the PC, and the 1st and 2nd channel indicator lights on the controller will stay on. Once the controller is connected, it will default to Xinput mode. PC mode switch: The default mode for PC connection is Xinput. Press and hold the

"MODE" button on the controller for 5 seconds to switch between Xinput, Dinput, and Switch modes. You can use the wired Switch mode to connect to a computer and enable motion control assistance in games through the Steam software. 2. Wired connection to Switch console:

Enable the communication function for the Pro wired controller in the system settings of the Switch console. Place the Switch console in the dock and connect the dock to the display device. When the controller is powered o, connect it to the USB port on the side of the dock using a USB data cable. The controller will automatically connect to the Switch console. Once connected, the channel indicator lights on the controller will stay on, indicating that it is being used as a wired Switch controller. In this mode, the ABXY characters and Switch operations are reversed. 3. Wired connection to Android/projector/TV devices:

When the controller is powered o, connect it to the USB port of the Android device using a USB-C data cable. The controller will automatically connect to the Android device. Once connected, the LED2 light on the controller will stay on, supporting HID standard mode for Android TV devices. 11 12 www.thunderobot.com Controller Connection to PC/Host Device Summary Wired connection device (supports wired PC, Android, SWitch) MODE Xinput WIRED USB 2.0/3.0 Dinput USB 2.0/3.0 Nintendo Switch USB2.0 ENABLED Automatically Automatically Automatically LED2+LED3 ashing, pairing successful. LED2+LED3 lights stay on. LED3+LED4 ashing, pairing successful. LED3+LED4 lights stay on. Follow the 8-channel indication rules Automatic identication of 2.4G receiver signal Xbox Wireless Controller G50S Pro Controller

CHANNEL INDICATION DEVICE NAME VIBRA TURBO MACRO III. After completion, lightly press M1/M2/M3/M4/M5/M6 to end the recording. The recording will automatically end after a certain time. The color of the joystick light will return to its previous color, indicating that the combination is set successfully. 5) A macro key mode is a sequence of key presses, saving the time and interval of each key press, ensuring correct execution of various actions. 6) Xinput, Dinput, Switch, and Android macro key data can be shared. 7) This function has memory function; there will be a vibration reminder when entering macro programming and after programming is completed. 8) Long press M5 + M6 for 10 seconds to restore macro programming to factory default settings, with vibration reminder. Follow the 8-channel indication rules OTHERS Key swapping Key swapping 6-axis motion sensing Screenshot recording Button wakeup Key swapping Key swapping Setting of TURBO function CHANNNEL INDICATION VIBRA TURBO MACRO OTHERS Long press the MODE button to switch between Dinput and NS protocols Long press the MODE button to switch to Xinput Six-axis motion sensing/

screenshot recording Switch to Dinput mode and long press for 5 seconds, accompanied by a vibration

+ LED1 + LED3 lights on, indicating successful mode switch (Android phones need to support OTG wired connection). Note: Key values are based on Android Dinput key values. Switch to Xinput mode and long press for 5 seconds, accompanied by a vibration

+ LED1 + LED2 lights on, indicating successful mode switch. Switch to NS mode and long press for 5 seconds, accompanied by a vibration +

LED1 lights on, indicating successful mode switch. The USB 2.0 interface of the Nintendo Switch base supports wired controllers, the USB 3.0 interface does not support wired controllers (tested with original base). Six-axis sensing supports SWITCH console games, an optional feature, with relevant component interfaces reserved. Short press the MODE button to take a screenshot, long press to start or stop recording. 9. Wireless connection device (supports wireless PC, iOS, Android, Switch) Toggle the switch (from left to right: X-2.4G-S-D, corresponding to

[Bluetooth PC/PC 2.4G/Bluetooth SWITCH/Bluetooth Android]) Toggle the gear switch to the corresponding mode, long press the "HOME"

button for 3 seconds to enter pairing mode, the indicator light ashes according to the corresponding mode. MODE X: (Xinput) D: (Dinput) S: Nintendo Switch 2.4G:2.4G Xinput/Dinput/NS Bluetooth Bluetooth2.1 Bluetooth2.1 Bluetooth2.1 Bluetooth2.1 Pairing method Move the gear to X[xinput]. Long press the HOME button for 3 seconds, the channel light will ash, entering Move the gear to D[Dinput]. Long press the HOME button for 3 seconds, the channel light will ash, entering pairing mode. pairing mode. Move the gear to S[NS]. Move the gear to 2.4G. Long press the HOME button Long press the HOME button for 3 seconds, the channel light will ash, entering for 3 seconds, the channel light will ash, entering pairing mode. pairing mode. Reconnect method Short press HOME to automatically reconnect when turning on Short press HOME to automatically reconnect when turning on Short press HOME to automatically reconnect when turning on Short press HOME to automatically reconnect when turning on

*Enter pairing mode when

*Enter pairing mode when

*Enter pairing mode when

*Enter pairing mode when no device is stored. no device is stored. no device is stored. no device is stored. 13 Lighting management 1) If there is no button pressed within 10 minutes of wireless connection, all backlight will be automatically turned o, and the controller will automatically shut down. 2) If there is no button pr in 10 minutes of wired connection, all backlight will be automatically turned o, and the controller will go into sleep mode. Press any button to wake it up. 3) Short press the lighting button to cycle through 5 levels of brightness adjustment:

0%, 25%, 50%, 75%, 100% (A/B/X/Y lights. Right joystick has red and blue dual-color lights). The default is 75%. 4) Long press the lighting button for 5 seconds to turn o/on all lights. To reopen, use the previous brightness settings. 5) Charging indication: When the controller is powered on without being connected or paired, the color ring of the right joystick will breathe with a blue light. When fully charged, the light will turn o. After connecting and pairing, the color ring of the right joystick will breathe with a blue light, and it will stay constantly lit when fully charged. Dual motor vibration adjustment 1) There are 5 gears for motor adjustment: 1 - 100% vibration, 2 - 75% vibration, 3 - 50% vibration, 4 - 25% vibration, 5 - vibration o. The default gear is 75%. 2) Short press the vibration button, the channel light indicates the current gear, and the strength of the motor cycles from gear 1 to 5. Note: The vibration light indication is the same as the battery level indication. When the vibration is at gear 1 with 100% intensity, LED1-LED4 will be on, when at gear 2 with 75% intensity, LED2-LED4 will be on, and so on. When at gear 5, no lights will be displayed. 3) This function has memory function. Programmable macro key setting 1) Programmable macro keys: M1/M2/M3/M4/M5/M6 2) Default values for macro keys:

M1 - Directional down key M4 - Directional left key M2 - Directional up key M5 - Right joystick press down M3 - Directional right key M6 - Left joystick press down 3) Recordable keys: A, B, X, Y, LB, LT, LS (left joystick press down), RB, RT, RS (right joystick press down), directional keys (up/down/left/right), joysticks (cannot simulate linear quantity, can only record one-way values), multiple key combinations or setting a single key, can be set as empty value (setting an empty value means clearing the corresponding M1/M2/M3/M4/M5/M6 macro function). 4) Macro recording method:

I. Long press MODE + M1/M2/M3/M4/M5/M6 for 3 seconds, at this time, the joystick will turn purple, indicating the start of macro programming and recording mode. II. Enter the keys and joystick movements you want to record, with support for recording time intervals. 14 1) Hold down the TURBO button and press the button you want to set as the TURBO function. The red light on the joystick will ash at the corresponding frequency, indicating a successful setting. For example: if the TURBO key set in the game is held down, it can achieve a rapid hitting function and the light on the right joystick will ash rapidly. 2)The TURBO function is triggered by default when pressed; When holding down the TURBO button without releasing it, pressing the designated TURBO button again will adjust the function to automatic TURBO mode; Repeating the same operation will cancel the current TURBO for the button. 3)The buttons that can be set for TURBO are: A, B, X, Y, LB, LT, RB, RT, the D-pad, BACK, START, and the six macro buttons M1 to M6. 4)This function has memory function; there will be a vibration reminder after the above operations are successful. 5)Long press MODE + TURBO button for 3 seconds to clear all TURBO functions that have been set. 6)TURBO speed adjustment: It supports three adjustable levels. By holding TURBO and pressing the left joystick up or down, you can adjust the TURBO speed to fast or slow. The adjustment range is between 5Hz, 10Hz, and 15Hz, with a default setting of 10Hz. SPEC JOYSTICK 2 (hall sensor) D-PAD 1, ALPS metal dome GAMING FUNCTION KEYS 12 A/B/X/Y LB/RB/ LT/RT BACK(SELECT/-) START(+) LS/RS Gamepad special features and combination keys FUNCTION KEYS 6: HOME/TURBO/MODE /Light key/Vibration key/Pairing gear switch (4 gears) FEATURES COMBINATION KEYS REMARK Activate zero dead zone for left and right joysticks Press and hold BACK+START for 5 seconds Activate zero dead zone for the left joystick Press and hold BACK+START+push down the left joystick for 5 seconds Activate zero dead zone for the right joystick Press and hold BACK+START+push down the right joystick for 5 seconds After enabling the zero dead zone mode for the left/right joystick, there may be a slight drift within a 3% deviation, which is normal. Repeat the operation to restore the previous settings. Switch the output curve trajectory for the left joystick Press and hold MODE+push down the left joystick together, then release it Switch the output curve trajectory for the right joystick Press and hold MODE+push down the right joystick together, then release it The joystick output trajectory will switch between pure circle and square. It is recommended for shooting game players to use the left square and right circle curve. Repeat the operation to restore the previous settings. Switch between the left joystick and the D-pad Press and hold TURBO+push down the left joystick together for 3 seconds Set the TURBO function for button rapid re Press and hold TURBO+ABXY/D-pad/

programming keys M1M6 together, then release them. The left joystick will map the values of the D-pad, and the D-pad will map the nonlinear values of the left joystick. Repeat the operation to restore the previous settings. The TURBO combination supports rapid re of the buttons and can switch between three rapid re modes. When the programming keys are mapped as a single key value, it is a single-key TURBO. When the programming keys are mapped as macro instructions, TURBO is not supported. 15 MAC KEYS 6: M1/M2/M3/M4/M5/M6 VIBRA MOTOR 2: (Independent control) EXTENTION Native NS six-axis motion sensing, one-key wake up NS. Calibration of Joysticks, Triggers, and Six-axis 1) Long press BACK + HOME to turn on the controller, channels 1, 2, 3, and 4 will

ash alternately. 2) Lay the controller at and press the START button once. The channel 3 light will stay on, entering joystick and board calibration mode. 3) Press the triggers (LT/RT keys) on both sides to their bottommost state for 2-3 consecutive times. 4) Rotate the left and right 3D joysticks clockwise or counterclockwise for 2-3 circles, recording the values of the joystick and trigger. 5) Press the START button to complete the calibration and turn o the controller. IV. SPECIFICATION DIMENSIONS 152mm * 106mm * 56mm 16

le itt oft TEAR quel Wl RA A Bk Vil 20 20090 80 70 60 80 | ! , ilinliaitialiadysalintia PRPRUTLCUTURERERREPLARATER HATER EA AEA ea eee ey UYU fTTTT PTTL Ep rir WIHT 20 10-9909 90 80 60 60 40 30 20 10409 90 80 70 40 30

[Heer hie 40 30 20 %

40 30 20 1010000 80 70 60 50 o

TOOT t 7 HENNT

. 02 ALLEL itl 1;

ft 10 Vth NN

. thu im iit hut min mar ae ELLE 08 OL 09 OF OF OF OF Ob 77 FUL MO ULL WLLL LLLO LLL

Qingdao Thunderobot Technology Co.,Ltd.(Shenzhen) Co.,Ltd Date: April 8, 2024 Product Model Number: Thunderobot gamepad FCC ID2BFDF-G50S To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:

Testing Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By:

Contact Listed on FCC Wesbite Title: Manager Email: 13088867187@163.com Telephone:08613088867187 On behalf of: Qingdao Thunderobot Technology Co.,Ltd.(Shenzhen) Co.,Ltd

REPORT No.SZ21110127E01 TEST REPORT APPLICANT

: Dongguan Kingsheng Electronics & Technology Co.,Ltd PRODUCT NAME : PCB Antenna MODEL NAME

: SL-9113 TRADE NAME

: N/A BRAND NAME

: N/A STANDARD(S)

: ANSI/IEEE Std 149-2008 RECEIPT DATE

: 2021-11-10 TEST DATE

: 2021-11-10 ISSUE DATE

: 2021-11-24 Edited by: :

Approved by::

Ke Zhiqing(Rapporteur) Chi Shide(Supervisor) NOTE: This document is issued by Shenzhen Morlab Communications Technology Co., Ltd.,the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB Shenzhen Morlab Communications Technology Co., Ltd.,FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road,Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: service@morlab.cn Page 1 of 14 REPORT No.SZ21110127E01 DIRECTORY 1. Technical Information...............................................................................................................3 1.1. Applicant and Manufacturer Information......................................................................... 3 1.2. Equipment Under Test (EUT) Description........................................................................3 2. Test Results.................................................................................................................................4 2.1. Applied Reference Documents........................................................................................... 4 2.2. Test Conditions.......................................................................................................................4 2.3. Measurement Uncertainty....................................................................................................4 2.4. Test Results lists.................................................................................................................... 5 Annex A Photographs...................................................................................................................6 Annex B Figures.............................................................................................................................7 1. 2D Radiation Pattern.................................................................................................................7 2. 3D Radiation Pattern.................................................................................................................9 3. VSWR...........................................................................................................................................11 Annex C Photographs.................................................................................................................12 Annex D General Information................................................................................................... 14 1.1 Identification of the Responsible Testing Laboratory................................................. 14 1.2 Identification of the Responsible Testing Location..................................................... 14 1.3 Test Equipments Utilized.....................................................................................................14 Version 1.0 Date 2021-11-24 Reason for change First edition Change History MORLAB Shenzhen Morlab Communications Technology Co., Ltd.,FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road,Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: service@morlab.cn Page 2 of 14 REPORT No.SZ21110127E01 1.Technical Information Note: Provide by manufacturer. 1.1. Applicant and Manufacturer Information Applicant:

Applicant Address:

Manufacturer:

Manufacturer Address:

Dongguan Kingsheng Electronics & Technology Co.,Ltd Build 39,Arising Sun Industrial City, Lincun Village, Tangxia Town, Dongguan, Guangdong, China Dongguan Kingsheng Electronics & Technology Co.,Ltd Build 39,Arising Sun Industrial City, Lincun Village, Tangxia Town, Dongguan, Guangdong, China 1.2.Equipment Under Test (EUT) Description Wireless Type Test frequency band Brand name Antenna model Hardware Version Software Version IMEI Sample number Bluetooth 2400MHz-2500MHz N/A SL-9113 N/A N/A N/A 1#

MORLAB Shenzhen Morlab Communications Technology Co., Ltd.,FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road,Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: service@morlab.cn Page 3 of 14 REPORT No.SZ21110127E01 2. Test Results 2.1.Applied Reference Documents Leading reference documents for testing:

No. 1 Identity Document Title ANSI/IEEE Std 149-2008 IEEE Standard Test Procedures for Antennas 2.2.Test Conditions Test Environment Conditions Relative Humidity:

Temperature:

25 ... 75 %

+10 C to +30 C 2.3.Measurement Uncertainty The uncertainty is calculated using the methods suggested in the "Guide to the Expression of Uncertainty in Measurement" (GUM) published by ISO. When the test result is a critical value,we will use the measurement uncertainty give the judgment result based on the 95% Confidence intervals. Item Gain VSWR Measurement Uncertainty(dB) 0.5 0.2 Measurement Uncertainty(95% Confidence Interval) K=2 MORLAB Shenzhen Morlab Communications Technology Co., Ltd.,FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road,Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: service@morlab.cn Page 4 of 14 REPORT No.SZ21110127E01 2.4.Test Results lists 2.4.1.Gain Frequency Gain(dBi) 2402MHz 2410MHz 2420MHz 2430MHz 2440MHz 2441MHz 2450MHz 2460MHz 2470MHz 2480MHz 1.28 1.15 1.33 0.52 0.59 0.63 0.48 0.49 0.35 0.95 Frequency 2402MHz 2441MHz 2480MHz VSWR 2.57 2.58 2.81 2.4.2.VSWR MORLAB Shenzhen Morlab Communications Technology Co., Ltd.,FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road,Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: service@morlab.cn Page 5 of 14 REPORT No.SZ21110127E01 Annex A Photographs 1. Test Setup MORLAB Shenzhen Morlab Communications Technology Co., Ltd.,FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road,Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: service@morlab.cn Page 6 of 14 REPORT No.SZ21110127E01 Annex B Figures 1. 2D Radiation Pattern Phi=0 Phi=90 MORLAB Shenzhen Morlab Communications Technology Co., Ltd.,FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road,Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: service@morlab.cn Page 7 of 14 Theta=90 REPORT No.SZ21110127E01 MORLAB Shenzhen Morlab Communications Technology Co., Ltd.,FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road,Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: service@morlab.cn Page 8 of 14 2. 3D Radiation Pattern REPORT No.SZ21110127E01 2402MHz 2441MHz MORLAB Shenzhen Morlab Communications Technology Co., Ltd.,FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road,Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: service@morlab.cn Page 9 of 14 REPORT No.SZ21110127E01 2480MHz MORLAB Shenzhen Morlab Communications Technology Co., Ltd.,FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road,Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: service@morlab.cn Page 10 of 14 3. VSWR REPORT No.SZ21110127E01 MORLAB Shenzhen Morlab Communications Technology Co., Ltd.,FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road,Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: service@morlab.cn Page 11 of 14 REPORT No.SZ21110127E01 Annex C Photographs 1. Test environment 2. EUT MORLAB Shenzhen Morlab Communications Technology Co., Ltd.,FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road,Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: service@morlab.cn Page 12 of 14 REPORT No.SZ21110127E01 MORLAB Shenzhen Morlab Communications Technology Co., Ltd.,FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road,Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: service@morlab.cn Page 13 of 14 REPORT No.SZ21110127E01 Annex D General Information 1.1 Identification of the Responsible Testing Laboratory Laboratory Name:

Laboratory Address:

Telephone:

Facsimile:

Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China

+86 755 36698555

+86 755 36698525 1.2 Identification of the Responsible Testing Location Name:

Address:

Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China 1.3 Test Equipments Utilized 1.3.1 List of Test Equipment NO. 1 2 3 Equipment Name Vector Network Analyzer OTA Chamber Antenna Measurement System Serial NO. Type Manufa cturer Cal.Date Cal.Due Date MY46214666 E5071C Agilent 2021.03.17 2022.03.16 N/A N/A SG24 Satimo 2021.01.12 2024.01.11 Satimo N/A N/A Satenv V1.4.1.14 build1 END OF REPORT MORLAB Shenzhen Morlab Communications Technology Co., Ltd.,FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road,Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: service@morlab.cn Page 14 of 14 13.00 45 I 5.10 0.50 5.00 7.50

Qingdao Thunderobot Technology Co.,Ltd.(Shenzhen) Co.,Ltd AddressNo. 1, Haier Road, Laoshan District, Qingdao Date: 2024-04-11 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref:

Attestation Statements Part 2.911(d)(7) Filing SUBJECT: FCC Application for FCC ID: 2BFDF-G50S FRN: 0035103605 Qingdao Thunderobot Technology Co.,Ltd.(Shenzhen) Co.,Ltdcertifies that, as of the date of the filing of the application, GRZAN GROUP INC. is our designated U.S. agent for service of process for the above referenced FCC ID. Qingdao Thunderobot Technology Co.,Ltd.(Shenzhen) Co.,Ltd accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-

related proceeding involving the equipment. GRZAN GROUP INC. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information:

Name: GRZAN GROUP INC. Address: 8825 53 AVE ELMHURST,NY11373 FRN 0034499368 Contact Person:Andy Smith Tel.:+1 (332) 201-5192 Email: 484142506 @qq.com Sincerely, Signed on behalf of Qingdao Thunderobot Technology Co.,Ltd.(Shenzhen) Co.,Ltd Signed on behalf of GRZAN GROUP INC. Name:Jenny Tan Title: Manager Date:2024-04-11 Name: Andy Smith Title:Manager Date: 2024-04-11

Qingdao Thunderobot Technology Co.,Ltd.(Shenzhen) Co.,Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 04-08-2024 FCC ID: 2BFDF-G50S Ref. #1:

Attestation Statements Part 2.911(d)(5)(i) Filing Qingdao Thunderobot Technology Co.,Ltd.(Shenzhen) Co.,Ltd certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2:

Attestation Statements Part 2.911(d)(5)(ii) Filing Qingdao Thunderobot Technology Co.,Ltd.(Shenzhen) Co.,Ltd certifies that, as of the date of the filing of the application, the applicant is notidentified on the Covered List as an entity producing covered equipment. Applicant: Qingdao Thunderobot Technology Co.,Ltd.(Shenzhen) Co.,Ltd Address:No. 1, Haier Road, Laoshan District, Qingdao Contact Person:Jenny Tan Tel.: 08613088867187 Email: 13088867187@163.com Sincerely, Signature:

Qingdao Thunderobot Technology Co.,Ltd.(Shenzhen) Co.,Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: April 8, 2024 Subject; Request for Confidentiality FCC ID:2BFDF-G50S To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name:Jenny Tan Title:Manager

Qingdao Thunderobot Technology Co.,Ltd.(Shenzhen) Co.,Ltd G50S_Model Difference Product description: Thunderobot gamepad Model name: G50S, G50S BLACK, G50S WHITE,G50S SE BLACK, G50S SE WHITE FCC ID: 2BFDF-G50S All the models are the same circuit and RF module. Only the model names and color are different. The model G50S is the tested sample. Sincerely Clients signature:

Clients name / title : Jenny Tan / Manager Contact information / address: Qingdao Thunderobot Technology Co.,Ltd.(Shenzhen) Co.,Ltd

Section 2.911(d)(7) USA Agent for Service of Process Name : Thunderobot 1, Haier Road, Laoshan District, Company name: Qingdao Thunderobot Technology Address:No. Qingdao Product FCC ID:2BFDF-G50S Model(s):GSOS, 2.911(d)(7) GSOS BLACK, G50S WHITE,G50S USA Designated gamepad Agent for Service of Process Co.,Ltd. SE BLACK, GSOS SE WHITE We, [Qingdao Thunderobot GROUP INC.] NOTE1 for the purpose of accepting applicant. Technology Co.,Ltd.]

("the applicant") service designate

[GRZAN on behalf of the of process consent:

our consent to accept service We acknowledge Applicant United States for matters related to the applicable addess and email address of the designated acceptance States for no less than one year after either we the grantee have permanently terminated or at the conclusion involving the in the and at the physical U.S. agent and acknowledge our within or judicial of any Commission-related administrative of our obligation and importation of the applicable an agent for service all marketing equipment, proceeding whichever to maintain equipment equipment, is later. in the United of process of process the U.S., We acknowledge our obligation related to the applicable Agent obligation:

of process in the United States for matters at our physical U.S. address and email address for no less than one year after eithe the grantee has permanently within the U.S., or at the conclusion judicial and importation of any Commission-related or terminated all marketing of the applicable proceeding in to accept service volving the equipment, whichever equipment is later equipment administrative USA Agent Applicant 8825 53 AVE ELMHURST,NY Company name: GRZAN GROUP INC. USA Address:

11373 FRN Number:0034499368 Contact Name:Andy Telephone Email: 484142506 @qq.com No: +1 (332) 201-5192 Smith Co.,Ltd. Company name: Qingdao Thunderobot Technology Address:

No. 1, Haier Road, Laoshan District, Qingdao Grantee FCC Grantee Contact Telephone Ema13088867187 FRN Number: 0035103605 No:08613088867187 Code:2BFDF Name:Jenny

@163.eom Tan Signature:

Title: Manager Date:2024/3/29 y70. Signature:

Title:

Date: 2024/3/29 Manager I?

ii PO Lt.fm 2.911 (d}(7}USA Agent vl.S Qingdao Thunderobot Technology Co.,Ltd.

(Shenzhen) Co.,Ltd NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 htt s://www.federalre ister. ov/documents/2023/02/06/2022-28263/

-a ainst-nation rotectin al-securit

-threats-to-the-communications-su I -chain-throu h-the 2.911 (d)(7)USA Agent vl.5