all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 210.15 KiB | September 07 2019 / August 08 2019 | |||
1 |
|
External Photos | External Photos | 441.81 KiB | September 07 2019 / August 08 2019 | |||
1 |
|
FCC Agent Authorization Letter | Cover Letter(s) | 17.88 KiB | September 07 2019 / August 08 2019 | |||
1 |
|
FCC Confidentiality Letter | Cover Letter(s) | 19.16 KiB | September 07 2019 / August 08 2019 | |||
1 |
|
ID Label/Location Info | ID Label/Location Info | 285.17 KiB | September 07 2019 / August 08 2019 | |||
1 |
|
Internal Photos | Internal Photos | 290.27 KiB | September 07 2019 / August 08 2019 | |||
1 |
|
RF Exposure Info | RF Exposure Info | 371.28 KiB | September 07 2019 / August 08 2019 | |||
1 |
|
Test Report | Test Report | 1.74 MiB | September 07 2019 / August 08 2019 | |||
1 |
|
Test Setup Photo | Test Setup Photos | 791.09 KiB | September 07 2019 / August 08 2019 |
1 | User Manual | Users Manual | 210.15 KiB | September 07 2019 / August 08 2019 |
Chargeupp Wireless Charger Instruction Manual Model: YT190428A Safety Instructions Read and follow all safety instructions. 1. Applicable operation temperature range is from 0 to 30 and can be stored at ambient temperature between 0 to 50 with ambient humidity less than or equal to 90%. Pad or battery of the charging mobile device may be damaged if Pad is not being used properly. 2. Avoid Pad receiving violent impact or intentional pressing, exposing to the sun and rain, or getting contact with corrosive substances. Keep away from fire. 3. Use Pad with certified adapter ONLY or those applied to international standard rules (5V/2.5A, 9V/2A, 12V 1.5A). 4. Do not disassemble, modify or repair Pad yourself. Contact your distributor for after sale service if there's any questions. 5. Avoid children and pets chewing or swallowing Pad. 6. Recycle Pad properly for environmental protection. Hazardous substance test result:
Mercury / Cadmium / Chromium 6 / PB / PBDEs (O) O: Content of the hazardous substances in all homogenous materials of the part is below the prescribed limits in accordance with GB/T26572 standard. Lead (X) X: Content of the hazardous substances in a homogeneous material of the part is exceeding the prescribed limits in accordance with GB/T26572 standard. Parts A. Wireless charger surface B. Wireless charger plug-in C. Indicator light User Guide 1. Plug in USB to power with certified adapter (QC 2.0 adapter is required). 2. Place mobile device (with wireless receiver built-in or attached) onto Pad's surface evenly and properly. 3. Remove mobile device from Pad's surface when it is fully charged. Indicator light description 1. Indicator light will be on for about 4 seconds for self-testing after connecting with power. 2. Indicator light flashes every 3 seconds at standby mode. 3. Indicator light will always be on at charging mode. 4. Flashing indicator light on shows output voltage is too low to charge. Change to stronger power and/or use QC 2.0 or QC 3.0 adapter. 5. Fast flashing indicator light on or light off shows charger and mobile device are not stably connected. Readjust the connection and make sure there is no metal placed between charger and receiver. Troubleshooting 1. Pad is not working. Check and make sure Pad's USB plug-in is well connected to proper power and/or adapter. 2. Mobile device is power off during charging or not being fully charged. Check and make sure the adapter is a certified product or those applied only to international standard rules. One Year Warranty Shenzhen Qitian Taiyi Technology Company Limited (hereinafter referred to "Company") warrants this product (see Exclusions below) to the original purchaser against defective material and workmanship that occurs during normal use for one year. Company will, at Company's option, either repair or replace same without charge (but no cash refunds will be made). 1. Damage resulting from accident, misuse, abuse, lack of reasonable care, subjecting the product to any but the specified electrical service, other than normal and ordinary use of the product, subjecting the product to abnormal working conditions or any other failure not resulting from defects in materials or workmanship. 2. Damage resulting from modification, tampering with or attempted repair by anyone other than the Company or designated repair representative by the Company. 3. Transfer of product to someone other than the original consumer purchaser. 4. The warranty is not valid for components subject to wear and/or to counterfeits. FCC ID: 2ATOD-YT190428A Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
1 | External Photos | External Photos | 441.81 KiB | September 07 2019 / August 08 2019 |
FCC ID: 2ATOD-YT190428A Test Model No.: YT190428A FCC ID: 2ATOD-YT190428A FCC ID: 2ATOD-YT190428A FCC ID: 2ATOD-YT190428A
1 | FCC Agent Authorization Letter | Cover Letter(s) | 17.88 KiB | September 07 2019 / August 08 2019 |
QITIAN TAIYI (SHENZHEN) TECHNOLOGY CO.,LTD Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2019/7/2 SUBJECT: FCC Application for (FCC ID: 2ATOD-YT190428A) To Whom It May Concern:
We, the undersigned, hereby authorize Aaron Ma in Shenzhen Huaxia Testing Technology Co., Ltd at 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Shenzhen Huaxia Testing Technology Co., Ltd on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely,
(Must be signed by the person that is listed on the FCC Website) Contact name:XING YI TAO Title: General manager Tel: 0755-26919086 Email: XINGYITAO@TYEETECH.COM Company name: QITIAN TAIYI (SHENZHEN) TECHNOLOGY CO.,LTD Date: 04/17/2018 VCB_F-01: Operating Procedures Form FCC Authorization v02 Page 1 of 1
1 | FCC Confidentiality Letter | Cover Letter(s) | 19.16 KiB | September 07 2019 / August 08 2019 |
QITIAN TAIYI (SHENZHEN) TECHNOLOGY CO.,LTD Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID:
2ATOD-YT190428A Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:
Exhibit Type 1. Block Diagram, 2.Schematics, 3. Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, we also request temporary confidential treatment of information accompanying this application as outlined below for an initial period of xxxx (ie- 45, 90 or 180) days:
Exhibit Type N/A File Name 1. 2ATOD-YT190428A-Block diagram 2. 2ATOD-YT190428A-SCH 3. 2ATOD-YT190428A-Operational description File Name N/A Contact name: XING YI TAL Title: General manager Company name: QITIAN TAIYI (SHENZHEN) TECHNOLOGY CO.,LTD Address: RM509, BLD C, Shiwaitaoyuan Park, Pinshan Road 1, Nanshan Dirstrict, Shenzhen, China Date: 04/17/2018 VCB_F-01: Operating Procedures Form FCC Confidentiality v02 Page 1 of 1
1 | ID Label/Location Info | ID Label/Location Info | 285.17 KiB | September 07 2019 / August 08 2019 |
Label location FCC ID: 2ATOD-YT190428A FCC ID: 2ATOD-YT190428A SIZE: 14X5MM
1 | Internal Photos | Internal Photos | 290.27 KiB | September 07 2019 / August 08 2019 |
FCC ID: 2ATOD-YT190428A Coil FCC ID: 2ATOD-YT190428A
1 | RF Exposure Info | RF Exposure Info | 371.28 KiB | September 07 2019 / August 08 2019 |
Shenzhen Huaxia Testing Technology Co., Ltd 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China Telephone:
+86-755-26648640
+86-755-26648637 Fax:
Website: www.cqa-cert.com Report Template Version: V03 Report Template Revision Date: Mar.1st, 2017 RF Exposure Evaluation Report CQASZ20190600420E-02 QITIAN TAIYI (SHENZHEN) TECHNOLOGY CO.,LTD Report No.:
Applicant:
Address of Applicant:
RM509, BLD C, Shiwaitaoyuan Park, Pinshan Road 1, Nanshan Dirstrict, Shenzhen, China QITIAN TAIYI (SHENZHEN) TECHNOLOGY CO.,LTD Manufacturer:
Address of Manufacturer: RM509, BLD C, Shiwaitaoyuan Park, Pinshan Road 1, Nanshan Dirstrict, Factory:
Address of Factory:
Shenzhen, China QITIAN TAIYI (SHENZHEN) TECHNOLOGY CO.,LTD RM509, BLD C, Shiwaitaoyuan Park, Pinshan Road 1, Nanshan Dirstrict, Shenzhen, China Equipment Under Test (EUT):
Product:
Model No.:
Brand Name:
FCC ID:
Standards:
Wireless charger YT190428A Chargeupp 2ATOD-YT190428A 47 CFR Part 1.1307 47 CFR Part 1.1310 KDB 680106 D01 RF Exposure Wireless Charging Base App v03 Date of Test:
Date of Issue:
Test Result :
2019-06-04 to 2019-06-11 2019-06-11 PASS*
Tested By Reviewed By:
Approved By:
(Daisy Qin)
(Aaron Ma )
( Jack Ai)
* In the configuration tested, the EUT complied with the standards specified above. The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CQA, this report cant be reproduced except in full. 1 Version Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-02 Report No. CQASZ20190600420E-02 Revision History Of Report Description Initial report Version Rev.01 Issue Date 2019-06-11 Page:2 of 12 2 Contents 1 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-02 Page VERSION ...................................................................................................................................................... 2 2 CONTENTS .................................................................................................................................................. 3 3 GENERAL INFORMATION .......................................................................................................................... 4 3.1 CLIENT INFORMATION .................................................................................................................................. 4 3.2 GENERAL DESCRIPTION OF EUT ................................................................................................................. 4 3.3 TEST ENVIRONMENT ................................................................................................................................... 5 3.4 DESCRIPTION OF SUPPORT UNITS ............................................................................................................... 5 3.5 TEST LOCATION .......................................................................................................................................... 6 3.6 TEST FACILITY ............................................................................................................................................ 6 3.7 EQUIPMENT LIST ......................................................................................................................................... 6 RF EXPOSURE EVALUATION .................................................................................................................... 7 4.1 RF EXPOSURE COMPLIANCE REQUIREMENT ................................................................................................ 7 4.1.1 Limits ................................................................................................................................................ 7 4.1.2 Test Procedure ................................................................................................................................ 7 4.1.3 Test Setup ........................................................................................................................................ 8 4.1.4 Test Results ..................................................................................................................................... 8 APPENDIX A: PHOTOGRAPHS OF TEST SETUP ........................................................................................... 12 4 Page:3 of 12 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-02 3 General Information 3.1 Client Information Applicant:
Address of Applicant:
Manufacturer:
Address of Manufacturer:
Factory:
Address of Factory:
QITIAN TAIYI (SHENZHEN) TECHNOLOGY CO.,LTD RM509, BLD C, Shiwaitaoyuan Park, Pinshan Road 1, Nanshan Dirstrict, Shenzhen, China QITIAN TAIYI (SHENZHEN) TECHNOLOGY CO.,LTD RM509, BLD C, Shiwaitaoyuan Park, Pinshan Road 1, Nanshan Dirstrict, Shenzhen, China QITIAN TAIYI (SHENZHEN) TECHNOLOGY CO.,LTD RM509, BLD C, Shiwaitaoyuan Park, Pinshan Road 1, Nanshan Dirstrict, Shenzhen, China 3.2 General Description of EUT Product Name:
Model No.:
Brand Name:
Hardware Version:
Software Version:
Equipment Category Operation Frequency range Modulation Type:
Antenna Type:
Antenna Gain:
EUT Power Supply:
Wireless charger YT190428A Chargeupp GRIP201901 C85U-V1.2.9 Non-ISM frequency 110-205KHz Induction Induction coil 0dBi DC 5V/DC 9V Note:
1. In section 15.31(m), regards to the operating frequency range less 1 MHz. 2. Only one model number: YT190428A, but it comes in two colors (white, black) Page:4 of 12 3.3 Test Environment Operating Environment:
Temperature:
Humidity:
Atmospheric Pressure:
Test Mode:
Mode a:
Mode b:
Mode c:
Mode d:
Mode e:
Mode f:
25.0 C 53 % RH 1010mbar Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-02 Wireless charging Mode at 9V (Full load) Wireless charging Mode at 9V (half load) Wireless charging Mode at 9V (Null load) Wireless charging Mode at 5V (Full load) Wireless charging Mode at 5V (half load) Wireless charging Mode at 5V (Null load) 3.4 Description of Support Units The EUT has been tested with associated equipment below. Description Adaptor Adaptor Wireless electronic Load Manufacturer Samsung HUAWEI Model No. EP-TA50CBC HW-050450C00
-
-
Remark FCC certification Provide by client Provide by client Provide by client Verification Verification
-
Page:5 of 12 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-02 3.5 Test Location Shenzhen Huaxia Testing Technology Co., Ltd, 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China 3.6 Test Facility A2LA (Certificate No. 4742.01) Shenzhen Huaxia Testing Technology Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 4742.01. FCC Registration No.: 522263 Shenzhen Huaxia Testing Technology Co., Ltd., Shenzhen EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration No.:522263 3.7 Equipment List Test Equipment Manufacturer Model No. Instrument No. Calibration Date Calibration Due Date Broadband Field Meter Magnetic field probe Narda Safety Test Solutions GmbH HIOKI NBM-520 SB9873 2018/10/18 2019/10/17 3470 SB9058/04 2018/12/14 2019/12/13 Page:6 of 12 4 RF Exposure Evaluation Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-02 4.1 RF Exposure Compliance Requirement 4.1.1 Limits According to FCC Part1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in part1.1307(b) Note 1: f = frequency in MHz ; *Plane-wave equivalent power density Note 2: For the applicable limit, see FCC 1.1310, 680106 D01 RF Exposure Wireless Charging Apps v03 Note 3: Emissions between 100 kHz to 300 kHz should be assessed versus the limits at 300 kHz in Table 1 of Section 1.1310: 614 V/m and 1.63 A/m. A KDB inquiry is required to determine the applicable exposure limits below 100 kHz. Note 4: The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit . 4.1.2 Test Procedure For devices designed for typical desktop applications, such a wireless charging pads, RF exposure evaluation should be conducted assuming a user separation distance of 20 cm(Top) and 15cm(Edge). E and H field strength measurements or numerical modeling may be used to demonstrate compliance. Measurements should be made from all sides and the top of the primary/client pair, with the 20 cm(Top) and 15cm(Edge) measured from the center of the probe(s) to the edge of the device. Page:7 of 12 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-02 4.1.3 Test Setup Note: Position A: Front of EUT; Position B: Left of EUT; Position C: back of EUT; Position D: Right of EUT;
Position E: Top of EUT(20 cm measure distance);
4.1.4 Test Results The EUT does comply with item 5 KDB680106 D01 v03.
(1) Power transfer frequency is less than 1 MHz.
(Conform)
(2) Output power from each primary coil is less than or equal to 15 watts.
(Conform)
(3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils.
(Conform)
(4) Client device is placed directly in contact with the transmitter.
(Conform)
(5) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion).
(Conform)
(6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit.
(Conform) Page:8 of 12 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-02 Test condition: Mode a E-field strength test result:
Frequency Range 110kHz Probe Position A Probe Position B Probe Position C Probe Position D Probe Position E
(V/m) 0.89
(V/m) 0.72
(V/m) 0.36
(V/m) 0.43
(V/m) 1.19 H-field strength test result:
Frequency Range 110kHz Probe Position A Probe Position B Probe Position C Probe Position D Probe Position E
(A/m) 0.23
(A/m) 0.41
(A/m) 0.38
(A/m) 0.45
(A/m) 0.31 Test condition: Mode b E-field strength test result:
Frequency Range 110kHz Probe Position A Probe Position B Probe Position C Probe Position D Probe Position E
(V/m) 0.87
(V/m) 0.58
(V/m) 0.29
(V/m) 0.37
(V/m) 0.91 H-field strength test result:
Frequency Range 110kHz Probe Position A Probe Position B Probe Position C Probe Position D Probe Position E
(A/m) 0.13
(A/m) 0.23
(A/m) 0.17
(A/m) 0.19
(A/m) 0.12 Limit
(V/m) 614 Limit
(A/m) 1.63 Limit
(V/m) 614 Limit
(A/m) 1.63 Page:9 of 12 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-02 Test condition: Mode c E-field strength test result:
Frequency Range 110kHz Probe Position A Probe Position B Probe Position C Probe Position D Probe Position E
(V/m) 0.83
(V/m) 0.56
(V/m) 0.31
(V/m) 0.27
(V/m) 0.66 H-field strength test result:
Frequency Range 110kHz Probe Position A Probe Position B Probe Position C Probe Position D Probe Position E
(A/m) 0.15
(A/m) 0.21
(A/m) 0.16
(A/m) 0.14
(A/m) 0.09 Test condition: Mode d E-field strength test result:
Frequency Range 110kHz Probe Position A Probe Position B Probe Position C Probe Position D Probe Position E
(V/m) 0.76
(V/m) 0.61
(V/m) 0.33
(V/m) 0.23
(V/m) 0.54 H-field strength test result:
Frequency Range 110kHz Probe Position A Probe Position B Probe Position C Probe Position D Probe Position E
(A/m) 0.17
(A/m) 0.22
(A/m) 0.10
(A/m) 0.19
(A/m) 0.06 Limit
(V/m) 614 Limit
(A/m) 1.63 Limit
(V/m) 614 Limit
(A/m) 1.63 Page:10 of 12 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-02 Test condition: Mode e E-field strength test result:
Frequency Range 110kHz Probe Position A Probe Position B Probe Position C Probe Position D Probe Position E
(V/m) 0.51
(V/m) 0.21
(V/m) 0.23
(V/m) 0.26
(V/m) 0.77 H-field strength test result:
Frequency Range 110kHz Probe Position A Probe Position B Probe Position C Probe Position D Probe Position E
(A/m) 0.09
(A/m) 0.22
(A/m) 0.06
(A/m) 0.12
(A/m) 0.07 Test condition: Mode f E-field strength test result:
Frequency Range 110kHz Probe Position A Probe Position B Probe Position C Probe Position D Probe Position E
(V/m) 0.79
(V/m) 0.25
(V/m) 0.19
(V/m) 0.24
(V/m) 0.67 H-field strength test result:
Frequency Range 110kHz Probe Position A Probe Position B Probe Position C Probe Position D Probe Position E
(A/m) 0.12
(A/m) 0.04
(A/m) 0.12
(A/m) 0.113
(A/m) 0.07 Limit
(V/m) 614 Limit
(A/m) 1.63 Limit
(V/m) 614 Limit
(A/m) 1.63 Page:11 of 12 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-02 APPENDIX A: PHOTOGRAPHS OF TEST SETUP
----END OF REPORT----
Page:12 of 12
1 | Test Report | Test Report | 1.74 MiB | September 07 2019 / August 08 2019 |
Shenzhen Huaxia Testing Technology Co., Ltd 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China Telephone:
+86-755-26648640
+86-755-26648637 Fax:
Website: www.cqa-cert.com Report Template Version: V03 Report Template Revision Date: Mar.1st, 2017 Test Report CQASZ20190600420E-01 QITIAN TAIYI (SHENZHEN) TECHNOLOGY CO.,LTD RM509, BLD C, Shiwaitaoyuan Park, Pinshan Road 1, Nanshan Dirstrict, Shenzhen, China QITIAN TAIYI (SHENZHEN) TECHNOLOGY CO.,LTD RM509, BLD C, Shiwaitaoyuan Park, Pinshan Road 1, Nanshan Dirstrict, Shenzhen, China QITIAN TAIYI (SHENZHEN) TECHNOLOGY CO.,LTD RM509, BLD C, Shiwaitaoyuan Park, Pinshan Road 1, Nanshan Dirstrict, Shenzhen, China Report No.:
Applicant:
Address of Applicant:
Manufacturer:
Address of Manufacturer:
Factory:
Address of Factory:
Equipment Under Test (EUT):
Product:
Model No.:
Brand Name:
FCC ID:
Standards:
Date of Test:
Date of Issue:
Test Result :
Wireless charger YT190428A Chargeupp 2ATOD-YT190428A 47 CFR Part 15, Subpart C 2019-06-04 to 2019-06-11 2019-06-11 PASS*
(Daisy Qin)
(Aaron Ma )
( Jack Ai) Tested By Reviewed By:
Approved By:
* In the configuration tested, the EUT complied with the standards specified above. The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CQA, this report cant be reproduced except in full. 1 Version Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-01 Revision History Of Report Description Initial report Version Rev.01 Issue Date 2019-06-11 Report No. CQASZ20190600420E-01 Page:2 of 27 2 Test Summary Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-01 Test Item Test Requirement Test method Antenna Requirement 47 CFR Part 15, Subpart C Section 15.203 ANSI C63.10 2013 Result PASS AC Power Line Conducted Emission 20dB Occupied Bandwidth Radiated Emission , Radiated Spurious Emissions 47 CFR Part 15, Subpart C Section 15.207 47 CFR Part 15, Subpart C Section 15.215 47 CFR Part 15, Subpart C Section 15.209 ANSI C63.10 2013 PASS ANSI C63.10 2013 PASS ANSI C63.10 2013 PASS Page:3 of 27 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-01 3 Contents 1 2 3 4 Page VERSION .................................................................................................................................................... 2 TEST SUMMARY ....................................................................................................................................... 3 CONTENTS ................................................................................................................................................ 4 GENERAL INFORMATION ........................................................................................................................ 5 4.1 CLIENT INFORMATION.............................................................................................................................. 5 4.2 GENERAL DESCRIPTION OF EUT ............................................................................................................. 5 4.3 TEST ENVIRONMENT ............................................................................................................................... 6 4.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................................... 6 4.5 STATEMENT OF THE MEASUREMENT UNCERTAINTY ................................................................................... 7 TEST LOCATION ...................................................................................................................................... 7 4.6 4.7 TEST FACILITY ........................................................................................................................................ 7 4.8 DEVIATION FROM STANDARDS ................................................................................................................. 7 4.9 OTHER INFORMATION REQUESTED BY THE CUSTOMER ............................................................................. 7 4.10 EQUIPMENT LIST ..................................................................................................................................... 8 TEST RESULTS AND MEASUREMENT DATA ........................................................................................ 9 5.1 ANTENNA REQUIREMENT ......................................................................................................................... 9 5.2 CONDUCTED EMISSIONS ....................................................................................................................... 10 5.3 20DB OCCUPY BANDWIDTH .................................................................................................................. 13 5.4 RADIATED SPURIOUS EMISSION & RESTRICTED BANDS ........................................................................... 15 5.4.1 Spurious Emissions .................................................................................................................... 15 PHOTOGRAPHS - EUT TEST SETUP .................................................................................................... 20 6.1 RADIATED EMISSION ............................................................................................................................. 20 6.2 CONDUCTED EMISSION ......................................................................................................................... 21 PHOTOGRAPHS - EUT CONSTRUCTIONAL DETAILS ........................................................................ 22 5 6 7 Page:4 of 27 4 General Information Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-01 4.1 Client Information Applicant:
Address of Applicant:
Manufacturer:
Address of Manufacturer:
Factory:
Address of Factory:
QITIAN TAIYI (SHENZHEN) TECHNOLOGY CO.,LTD RM509, BLD C, Shiwaitaoyuan Park, Pinshan Road 1, Nanshan Dirstrict, Shenzhen, China QITIAN TAIYI (SHENZHEN) TECHNOLOGY CO.,LTD RM509, BLD C, Shiwaitaoyuan Park, Pinshan Road 1, Nanshan Dirstrict, Shenzhen, China QITIAN TAIYI (SHENZHEN) TECHNOLOGY CO.,LTD RM509, BLD C, Shiwaitaoyuan Park, Pinshan Road 1, Nanshan Dirstrict, Shenzhen, China 4.2 General Description of EUT Product Name:
Model No.:
Brand Name:
Hardware Version:
Software Version:
Equipment Category Operation Frequency range Modulation Type:
Antenna Type:
Antenna Gain:
EUT Power Supply:
Wireless charger YT190428A Chargeupp GRIP201901 C85U-V1.2.9 Non-ISM frequency 110-205KHz Induction Induction coil 0dBi DC 5V/DC 9V Note:
1. In section 15.31(m), regards to the operating frequency range less 1 MHz. 2. Only one model number: YT190428A, but it comes in two colors (white, black) Page:5 of 27 4.3 Test Environment Operating Environment:
Temperature:
Humidity:
Atmospheric Pressure:
Test Mode:
Mode a:
Mode b:
Mode c:
Mode d:
Mode e:
Mode f:
25.0 C 53 % RH 1010mbar Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-01 Wireless charging Mode at 9V (Full load) Wireless charging Mode at 9V (half load) Wireless charging Mode at 9V (Null load) Wireless charging Mode at 5V (Full load) Wireless charging Mode at 5V (half load) Wireless charging Mode at 5V (Null load) Note:
The mode a was the worst case and only the data of the worst case record in this report. 4.4 Description of Support Units The EUT has been tested with associated equipment below. Description Adaptor Adaptor Wireless electronic Load Manufacturer Samsung HUAWEI Model No. EP-TA50CBC HW-050450C00
-
-
Remark FCC certification Provide by client Provide by client Provide by client Verification Verification
-
Page:6 of 27 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-01 4.5 Statement of the measurement uncertainty The data and results referenced in this document are true and accurate. The reader is cautioned that there may be errors within the calibration limits of the equipment and facilities. The measurement uncertainty was calculated for all measurements listed in this test report acc. to CISPR 16 - 4 Specification for radio disturbance and immunity measuring apparatus and methods Part 4: Uncertainty in EMC Measurements and is documented in the Shenzhen Huaxia Testing Technology Co., Ltd. quality system acc. to DIN EN ISO/IEC 17025. Furthermore, component and process variability of devices similar to that tested may result in additional deviation. The manufacturer has the sole responsibility of continued compliance of the device. Hereafter the best measurement capability for CQA laboratory is reported:
No. Item Uncertainty Notes 1 2 3 4 5 Radiated Emission (Below 1GHz) Radiated Emission (Above 1GHz) Occupied Bandwidth Temperature test Humidity test 5.12dB 4.60dB 1.1%
0.8 2.0%
(1)
(1)
(1)
(1)
(1)
(1)This uncertainty represents an expanded uncertainty expressed at approximately the 95%
confidence level using a coverage factor of k=2. 4.6 Test Location Shenzhen Huaxia Testing Technology Co., Ltd, 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China 4.7 Test Facility A2LA (Certificate No. 4742.01) Shenzhen Huaxia Testing Technology Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 4742.01. FCC Registration No.: 522263 Shenzhen Huaxia Testing Technology Co., Ltd., Shenzhen EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration No.:522263 4.8 Deviation from Standards None. 4.9 Other Information Requested by the Customer None. Page:7 of 27 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-01 4.10 Equipment List Test Equipment EMI Test Receiver Manufacturer R&S Model No. ESR7 AFS4-00010300-18-10P-
4 FMZB1516 HL562 Instrument No. CQA-005 CQA-035 CQA-087 CQA-011 Calibration Date 2018/9/26 2018/9/26 Calibration Due Date 2019/9/25 2019/9/25 2018/10/28 2020/10/27 2018/9/26 2020/9/25 Preamplifier Loop antenna Bilog Antenna Coaxial Cable
(Above 1GHz) Coaxial Cable
(Below 1GHz) EMI Test Receiver LISN Coaxial cable MITEQ Schwarzbeck R&S CQA CQA R&S R&S CQA N/A C019 2018/9/26 2019/9/25 N/A ESPI3 ENV216 N/A C020 CQA-013 CQA-003 CQA-C009 2018/9/26 2018/9/26 2018/11/5 2018/9/26 2019/9/25 2019/9/25 2019/11/4 2019/9/25 Page:8 of 27 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-01 5 Test results and Measurement Data 5.1 Antenna Requirement 47 CFR Part 15C Section 15.203 Standard requirement:
15.203 requirement:
An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. 15.247(b) (4) requirement:
The conducted output power limit specified in paragraph (b) of this section is based on the use of antennas with directional gains that do not exceed 6 dBi. Except as shown in paragraph (c) of this section, if transmitting antennas of directional gain greater than 6 dBi are used, the conducted output power from the intentional radiator shall be reduced below the stated values in paragraphs (b)(1),
(b)(2), and (b)(3) of this section, as appropriate, by the amount in dB that the directional gain of the antenna exceeds 6 dBi. EUT Antenna:
The antenna is Induction coil. The best case gain of the antenna is 0dBi. Page:9 of 27 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-01 5.2 Conducted Emissions Test Requirement:
Test Method:
Test Frequency Range: 150kHz to 30MHz Limit:
47 CFR Part 15C Section 15.207 ANSI C63.10: 2013 Frequency range (MHz) 0.15-0.5 0.5-5 5-30 Limit (dBuV) Quasi-peak 66 to 56*
56 60 Average 56 to 46*
46 50 Test Procedure:
Test Setup:
* Decreases with the logarithm of the frequency. 1) The mains terminal disturbance voltage test was conducted in a shielded room. 2) The EUT was connected to AC power source through a LISN 1 (Line Impedance Stabilization Network) which provides a 50/50H + 5 linear impedance. The power cables of all other units of the EUT were connected to a second LISN 2, which was bonded to the ground reference plane in the same way as the LISN 1 for the unit being measured. A multiple socket outlet strip was used to connect multiple power cables to a single LISN provided the rating of the LISN was not exceeded. 3) The tabletop EUT was placed upon a non-metallic table 0.8m above the ground reference plane. And for floor-standing arrangement, the EUT was placed on the horizontal ground reference plane. 4) The test was performed with a vertical ground reference plane. The rear of the EUT shall be 0.4 m from the vertical ground reference plane. The vertical ground reference plane was bonded to the horizontal ground reference plane. The LISN 1 was placed 0.8 m from the boundary of the unit under test and bonded to a ground reference plane for LISNs mounted on top of the ground reference plane. This distance was between the closest points of the LISN 1 and the EUT. All other units of the EUT and associated equipment was at least 0.8 m from the LISN 2. 5) In order to find the maximum emission, the relative positions of equipment and all of the interface cables must be changed according to ANSI C63.10: 2013 on conducted measurement. Test Results:
Pass Page:10 of 27 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-01 Measurement Data the worst case Mode a:
Live line:
Remark:
1. The following Quasi-Peak and Average measurements were performed on the EUT:
2. Final Test Level =Receiver Reading + LISN Factor + Cable Loss. 3. If the Peak value under Average limit, the Average value is not recorded in the report. Page:11 of 27 the worst case Mode a:
Neutral line:
Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-01 Remark:
1. The following Quasi-Peak and Average measurements were performed on the EUT:
2. Final Test Level =Receiver Reading + LISN Factor + Cable Loss. 3. If the Peak value under Average limit, the Average value is not recorded in the report. Page:12 of 27 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-01 5.3 20dB Occupy Bandwidth Test Requirement:
Test Method:
Test Setup:
47 CFR Part 15C Section 15.215 ANSI C63.10 2013 Remark: Offset=Cable loss+ attenuation factor. Pass Test Results:
Measurement Data Test Frequency (KHz) 20dB Occupy Bandwidth (kHz) 110 0.039 Result Pass Mode a Page:13 of 27 Test plot as follows:
110K Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-01 Graphs Page:14 of 27 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-01 5.4 Radiated Spurious Emission & Restricted bands 5.4.1 Spurious Emissions Test Requirement:
Test Method:
Test Site:
Receiver Setup:
Limit:
47 CFR Part 15C Section 15.209 and 15.205 ANSI C63.10 2013 Measurement Distance: 3m (Semi-Anechoic Chamber) Frequency 0.009MHz-0.090MHz 0.009MHz-0.090MHz 0.090MHz-0.110MHz 0.110MHz-0.490MHz 0.110MHz-0.490MHz 0.490MHz -30MHz 30MHz-1GHz Detector Peak Average Quasi-peak Peak Average Quasi-peak Quasi-peak Above 1GHz Frequency Peak Peak Field strength
(microvolt/meter) 0.009MHz-0.490MHz 2400/F(kHz) 0.490MHz-1.705MHz 24000/F(kHz) 1.705MHz-30MHz Remark Peak VBW RBW 30kHz 10kHz 30kHz Average 10kHz 30kHz Quasi-peak 10kHz 30kHz 10kHz 30kHz Average 10kHz 10kHz 30kHz Quasi-peak 100 kHz 300kHz Quasi-peak 1MHz 1MHz 3MHz 10Hz Peak Peak Limit
(dBuV/m) Remark Average Measurement distance (m)
-
-
-
-
-
-
40.0 43.5 46.0 54.0 54.0 30 100 150 200 500 500 30MHz-88MHz 88MHz-216MHz 216MHz-960MHz 960MHz-1GHz Above 1GHz Note: 15.35(b), Unless otherwise specified, the limit on peak radio frequency emissions is 20dB above the maximum permitted average emission limit applicable to the equipment under test. This peak limit applies to the total peak emission level radiated by the device. Quasi-peak Quasi-peak Quasi-peak Quasi-peak Average 300 30 30 3 3 3 3 3 Page:15 of 27 Test Setup:
Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-01 Figure 1. Below 30MHz m c 0 5 1 Figure 2. 30MHz to 1GHz Figure 3. Above 1 GHz Test Procedure:
a. 1) Below 1G: The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter semi-anechoic camber. The table was rotated 360 degrees to determine the position of the highest radiation. 2) Above 1G: The EUT was placed on the top of a rotating table 1.5 meters above the ground at a 3 meter semi-anechoic camber. The table was rotated 360 degrees to determine the position of the highest radiation. Note: For the radiated emission test above 1GHz:
Place the measurement antenna away from each area of the EUT determined to be a source of emissions at the specified measurement distance, while keeping the measurement antenna aimed at the source of emissions at each frequency of significant emissions, with polarization oriented for maximum response. The measurement antenna may have to be higher or lower than the EUT, depending on the radiation pattern of the emission and staying aimed at the emission source for receiving the maximum signal. The final measurement antenna elevation shall be that which maximizes the emissions. The measurement antenna elevation for maximum emissions shall be restricted to a range of heights of from 1 m to 4 m above the ground or reference ground plane. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the Page:16 of 27 measurement. Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-01 d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was tuned to heights 1 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. f. Test Results:
g. Repeat above procedures until all frequencies measured was complete. Pass Radiated Emission below 9K~30MHz the worst case Test mode:
Mode a Frequency MHz Polarization Reading dB(uV) 0.1101 0.1101 Face Side 47.35 46.71 Factor dB
(1/m) 19.59 19.59 Level dB(uV/m) Peak 66.94 66.3 Limit dB(uV/m) Average 106.77 106.77 Margin dB Pass/Fail 39.83 40.47 Pass Pass Note: No other emissions found between lowest internal used/generated frequencies to 30MHz. The peak level of the emission is less than the average limit, so the average level shall be less than the limit without test. Page:17 of 27 Radiated Emission 30MHz~1GHz, the worst case Test mode:
Mode a Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-01 Vertical Remark:
The field strength is calculated by adding the Antenna Factor, Cable Factor & Preamplifier. The basic equation with a sample calculation is as follows:
Final Test Level =Receiver Reading + Antenna Factor + Cable Factor Page:18 of 27 30MHz~1GHz, the worst case Test mode:
Mode a Horizontal Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-01 Remark:
The field strength is calculated by adding the Antenna Factor, Cable Factor & Preamplifier. The basic equation with a sample calculation is as follows:
Final Test Level =Receiver Reading + Antenna Factor + Cable Factor Page:19 of 27 6 Photographs - EUT Test Setup Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-01 6.1 Radiated Emission 9KHz~30MHz:
30MHz~1GHz:
Page:20 of 27 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-01 6.2 Conducted Emission Page:21 of 27 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-01 7 Photographs - EUT Constructional Details Test Model No.: YT190428A Page:22 of 27 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-01 Page:23 of 27 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-01 Page:24 of 27 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-01 Page:25 of 27 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-01 Page:26 of 27 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190600420E-01
. The End Page:27 of 27
1 | Test Setup Photo | Test Setup Photos | 791.09 KiB | September 07 2019 / August 08 2019 |
FCC ID: 2ATOD-YT190428A 1 Photographs - EUT Test Setup 1.1 Radiated Emission 9KHz~30MHz:
30MHz~1GHz:
FCC ID: 2ATOD-YT190428A 1.2 Conducted Emission
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-08-08 | 0.11 ~ 0.205 | DCD - Part 15 Low Power Transmitter Below 1705 kHz | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2019-08-08
|
||||
1 | Applicant's complete, legal business name |
QITIAN TAIYI (SHENZHEN) TECHNOLOGY CO.,LTD
|
||||
1 | FCC Registration Number (FRN) |
0028570125
|
||||
1 | Physical Address |
RM509, BLD C, Shiwaitaoyuan Park, Pinshan Road 1, Nanshan Dirstrict
|
||||
1 |
RM509, BLD C, Shiwaitaoyuan Park
|
|||||
1 |
ShenZhen, N/A
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
C******@vista-compliance.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2ATOD
|
||||
1 | Equipment Product Code |
YT190428A
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
X****** T********
|
||||
1 | Title |
General manager
|
||||
1 | Telephone Number |
0755-********
|
||||
1 | Fax Number |
0755-********
|
||||
1 |
X******@TYEETECH.COM
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Shenzhen Huaxia Testing Technology Co., Ltd
|
||||
1 | Name |
D******** Z********
|
||||
1 | Physical Address |
1261 Puerta Del Sol
|
||||
1 |
san clemente, 92673
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
94939********
|
||||
1 | Fax Number |
86-75********
|
||||
1 |
a******@cqa-cert.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DCD - Part 15 Low Power Transmitter Below 1705 kHz | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless charger | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not co-locate with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures for satisfying RF exposure compliance | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Shenzhen Huaxia Testing Technology Co., Ltd
|
||||
1 | Name |
A**** M******
|
||||
1 | Telephone Number |
+86-0********
|
||||
1 |
a******@cqa-cert.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 0.11000000 | 0.20500000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC