FCC ID: 2AJQOQPC100W 4K Wireless Document Camera

QPC100W 4KWirelessDocumentCamera User Manual Wi-FiConnection Instructions V1.1 Wi-FiAPModeConnection 1. Toggle the switch on the side of the unit to the Wi-Fi mode. The Wi-Fi LED indicator will emit a green flashing light. 2. Open the wireless network list on the computer then select the

[QOMO_5G_xxxxxx] in the network list and input the password for connection (default: 88889999) to start the connection. 3. When the connection is successful, the Wi-Fi LED indicator will emit a solid green light. 4. Launch the QCapture Pro software and select the mode Direct Wi-Fi (AP Mode) Connection. Please note: When the direct Wi-Fi AP mode is connected, the Internet will be disconnected. WI-FIClient(STA)ModeConnection indicator will emit a blue flashing light. 1. Toggle the switch on the side of the unit to the Wi-Fi mode. The Wi-Fi LED 1. Open the wireless network list on the computer then select the

[QOMO_5G_xxxxxx] in the network list and input the password for connection (default: 88889999) to start the connection. 2. Open the web browser and enter the default IP [192.168.100.1] in the address bar. 3. Enter the login account [admin] and default password [9999] and click Login. 5. After logging in to the web page, you can access a live preview and configure the settings on the web page. When the STA mode is configured, launch QCapture Pro software and select the mode WiFi STA (Client Mode) Connection. WebPageSettings Instructions V1.1 Web Page Menu Function Description 1. Login Screen Item User Login Account Function Descriptions Enter user login account (default: admin) User Password Enter user password (default: 9999) Remember user account and password Save user login account and password to the browser. When you log in next time, there is no need to re-enter them Login Log into the administrator screen on the website No 1 2 3 4 2. Live Viewing 7 1 2 4 3 5 6 No Item Function Descriptions Preview window Autofocus Lamp mode toggle switch Zoom In Zoom Out Display the live preview image captured by the QPC100W Automatically adjusts the image for the optimal brightness and focus Click lamp mode to toggle the light switch: off / brightness 1 / brightness 2 / brightness 3 Zoom in image Zoom out image Rotate the image Rotate the image: 0 / 90 / 180 / 270 / Flip / Mirror Logout Log out of the web page 1 2 3 4 5 6 7 3. RTSP Streaming Settings 1 2 3 4 5 6 7 8 No Item Function Descriptions 1 2 3 4 5 6 7 8 Resolution Bit Rate (kbps) Port Number Audio Setting RTSP URL Save Cancel Default Show or set the RTSP output resolution and fps Show or set the RTSP Bit rate (0 ~ 20000) Set the RTSP port (0 ~ 10000) Turn on/off RTSP audio Show current RTSP URL connection Save and change the RTSP streaming settings Cancel without saving Restore to default settings 4. Wi-Fi Setting (Access Point Mode) 1 2 3 4 5 6 8 9 7 No Item Wi-Fi Mode Wi-Fi 5G/2.4G Function Descriptions Select Access Point or Client Mode Switch between 5G / 2.4G under Wi-Fi Access Point mode Device Name (SSID) Device name of wireless network Channel Security Password Save Cancel Select the channel based on different regions Wi-Fi encryption setting Connect the Wi-Fi SSID password Save and change the wireless network settings Cancel without saving Show Password Show the Wi-Fi SSID password 1 2 3 4 5 6 7 8 9 5. Wi-Fi Setting (Client Mode) 1 2 3 4 5 6 7 8 9 Item No 1 Wi-Fi Mode Scan 2 Disconnection 3 Remove 4 Function Descriptions Select Access Point or Client Mode Scan nearby wireless network devices Disconnect from current wireless network device Remove the selected wireless network device from the list Click the wireless device and the following image will be displayed. Enter the password to connect to various wireless network devices List of Wi-Fi Wireless Network Device Names 5 6 7 8 9 Device Name Device name of wireless network Connection Status Display the wireless network device to which QOMO QPC100W is currently connected to. If connected, the corresponding field of the wireless device will display Connected, otherwise it will stay blank Encryption Signal Status The current encryption setting of the wireless network device Show the degree of the Wi-Fi signal 6. System Network Information 1 No 1 Item Network Function Descriptions The network setting of the QPC100W device. When the DHCP function is closed, click edit to enter edit mode and change the network setting. 7. Maintenance 1 2 3 4 5 No Item Function Descriptions Reset to the default value Select the reset button to resume the factory default setting as the web page setting Reboot Click the reboot button and reboot the device Current Firmware version Display current firmware version Upgrade file path Choose firmware *.appsw file Start Update Click and start update the firmware 1 2 3 4 5 8. User Account 1 Item Function Descriptions User Name Password Save Cancel Allow modify the user login account (default: admin) Allow modify the login password (default: 9999) Save and change the wireless network settings Cancel without saving No 1 2 3 4 9. About 1 No 1 Item Function Descriptions Related Information Display information about this device. Supplier's Declaration of Conformity 47 CFR 2.1077 Compliance Information ManufacturerQOMO,LLC Product NameQPC100W Model Number4K Wireless Document Camera Responsible Party U.S. Contact Information SupplierQOMO,LLC 46950 Magellan Drive, Wixom, MI 48393,United States e-mail support@qomo.com FCC Compliance Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

(1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Label and size:

THIS DEVICE COMPLES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS :

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CASUE UNDESIRED OPERATION THIS DEVICE COMPLES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS :

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CASUE UNDESIRED OPERATION Label Artwork and Location Model: QPC100W Location

QOMO, LLC 46950 Magellan Drive, Lot4 Wixom, MI48393, United States Agent Authorization Company: QOMO, LLC Address: 46950 Magellan Drive, Lot4 Wixom, MI48393, United States Product Name: 4K Wireless Document Camera Model Number(s): QPC100W Product Description: 4K Wireless Document Camera We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: 2022-05-07 Signature:

Name:

Jeff Li Title:

Manager Company: QOMO, LLC

QOMO, LLC Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Long Term Confidentiality FCC ID: 2AJQOQPC100W Date: 2022-05-07 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Jeff Li Title: Manager

QOMO, LLC 46950 Magellan Drive, Lot4 Wixom, MI48393, United States FCC Software Configuration Control Declaration Date: May 09 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn:

OET Dept. Product/ Model Number:4K Wireless Document Camera/QPC100W Regarding FCC Country Code Selection guidelines identified in KDB 594280 D01v02r01. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Date: 2022-05-07 Name: Jeff Li Title: Manager Signature of applicant FCC Software Configuration Control Declaration Rev1.1