QOMO Interactive Touch Screen User Manual V1.0 www.qomo.com Content Safety Instruction .......................................................................................................................................................... 1 Installation .................................................................................................................................................................... 3 Bearing .................................................................................................................................................................................. 3 Wall-mounting ...................................................................................................................................................................... 3 OPS Installation ................................................................................................................................................................... 4 Basic Operation ............................................................................................................................................................ 6 Power on ............................................................................................................................................................................... 6 Power off ............................................................................................................................................................................... 6 Control Panel ................................................................................................................................................................ 6 Panel Interface .............................................................................................................................................................. 8 Remote Control ............................................................................................................................................................ 9 Remote Control Area ..........................................................................................................................................................10 Connecting and Setting ............................................................................................................................................... 11 External Computer and Touch Connecting ..................................................................................................................... 11 AV Connecting ....................................................................................................................................................................12 Video-OUT ..........................................................................................................................................................................12 RS232 ...................................................................................................................................................................................13 Android Home Page ................................................................................................................................................... 15 Bottom-up Toolbar ..................................................................................................................................................... 16 Signal Source Selection .............................................................................................................................................. 17 Android Settings ......................................................................................................................................................... 19 Common Setting .................................................................................................................................................................19 Network Setting ..................................................................................................................................................................20 Application Setting .............................................................................................................................................................21 Storage Setting ....................................................................................................................................................................21 Date Setting .........................................................................................................................................................................21 Language Setting ................................................................................................................................................................22 Factory Reset .......................................................................................................................................................................22 About Device .......................................................................................................................................................................22 Built-in PC Operation ................................................................................................................................................. 23 Menu ........................................................................................................................................................................... 24 Included Accessories .................................................................................................................................................. 26 Troubleshooting .......................................................................................................................................................... 27 Safety Instruction For your safety, please read the following instruction before you use the product. Serious injury or property loss may be caused by improper operations. Do not try to repair the product without guidance. Placement Do not place the unit on an unstable cart, stand, tripod, racket, table, or shelf. Do not expose the unit to direct sunlight and other sources of heat. Do not handle liquids near or on the unit. Never spill liquid of any kind into the unit Do not put the unit near appliances that create magnetic fields. Power Supply Check that the units operating voltage is identical with your local power supply. Please unplug power supply and aerial plug when the weather is thunder-storm or lighting. Please unplug power supply when there is nobody at home or didnt use over a long time. Please keep power cord from physical or mechanical damage. Please use exclusive power cord, don't modify or lengthen it. Please check and ensure AC source is connected with the ground. A sudden power failure may damage the panel. Frequent power on and off in a short time may cause faults. LED Screen Never use any other tough or sharp object to replace the written pen. Unplug the power supply plug before cleaning. Clean the screen with a soft dustless and dry cloth. Never use water or the spray type detergent to clean the unit. For deep clean, contact an authorized service center. Please dont display the high brightness image on the screen for a long time. Sight Distance The best distance between audience and screen is 5-7 times that of screen diagonal. The best watching angle between audience and screen is within 176 degrees. Temperature Do not place the unit near or over a radiator or a heater register. If your unit is suddenly moved from a cold to a warm place, unplug the power cord for at least. Two hours so that moisture that may have formed inside the unit can dry completely. 1 Normal operating temperature is 5 ~ 40. Humidity Do not expose machine in rain, damp or place near water. Ensure the indoor drying, cool. Ventilation Keep the ventilation openings clear. Ensure that the unit has enough space for ventilation around: left, right and back >10cm, top> 20cm. Earphone It will affect the hearing if you listen to noisy sound for a long time. Before using earphone, please turn down the volume in advance. CAUTION This is a Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures. 2 Installation Bearing If the product is I nstalled in a wall-mounted way, the bearing capacity of the surface for installation must be at least four times of the weight of the product. If the surface for installation is a wall or the ceiling of a building, the surface must be made of solid bricks, concrete or other materials with equal intensity. If the product is installed on a surface made of loose material such as an old brick wall, wood plank wall, solid brick wall, a metal or non-metal structure surface, or a surface with a thick decoration layer, take necessary consolidating measures to ensure that the product is stably installed. Note: When the product is installed in a wall-mounted way, the screws need to be installed deeper than 10 mm in the wall. Do not block ventilation vents. Wall-mounting Level Use a level to locate the holes in a horizontal Insert wall plugs into the mounting holes. line and mark with pencil where the holes will Push the self-tapping screws through the be located. Then drill holes in the wall. bracket into the wall plugs and tighten the screws. 3 Attach the mounting arms to the back of screen with the screws. Insert wall plugs into the mounting holes. Push the self-tapping screws through the bracket into the wall plugs and tighten the screws. Note: The horizontal and vertical distance of mounting holes on the back of screen must be within the required distance of bracket. OPS Installation Note: The OPS does not support hot-plugging. Please insert the plug of the OPS after the interactive panel is disconnected from the power. Install the OPS by the following steps:
1. Insert the OPS into the special slot on the rear of the interactive panel. 2. Tighten the screws. 3. Confirm that the OPS is installed correctly. 4 5 Basic Operation Power on Power the interactive touch screen with the 100V-240V 50Hz/60Hz AC power supply. Connect the panel to the power supply. Press the rocker switch (on the bottom left in the rear of the panel) to enter standby mode. The power indicator turns red. Press power button on the control panel or Power button on the remote control to turn on the display and built-in PC simultaneously. The power indicator turns green. Power off Press ECO on the control panel to temporarily turn off the display. Press power button on the control panel or Power button on the remote control to enter standby mode. The power indicator turns red. In standby mode, press the rocker switch to power off the touch screen. Control Panel 6 Item Icon Function Description
-
-
-
-
1 2 3 4 5 6 Brightness sensor: Auto adjust brightness according to the enviroment Power indicator:
Press power button on the control panel. The power indicator turns green. Press power button on the control panel to enter the standby mode. The power indicator turns red. Android/PC USB port*2 auto switch Do not switch the signal source if the usb flash drive is writing. Touch Port, designated for Front HDMI port HDMI port used to connect an external display device Front Speakers Magnetic pen holder Enter/Return to Android home page Return to previous interface Decrease volume Increase volume Enter ECO mode to turn off the display Enter/Exit Setting menu Enter/Exit signal source menu Power button: On or standby mode 7 0 Panel Interface 8 Item Function Description 1 Power on or standby mode 2 Mute on/off 3 4 5 6 7 8 9 Change channels or enter numbers Return to previous interface SLEEP: Set the sleep time NICAM: Nicam button ASPECT: Adjust picture aspect ratio Signal source selection Show the current signal source Up/down/right/left direction buttons OK: Confirm Show or hide menu 10 Quit the current interface 11 Increase/decrease volume
`12 Change channel 13 P. MODE: Picture mode SMODE: Sound mode EPG: Digital Program Guide 14 Play/ Pause 15 Capture 16 Rewind or replay certain scenes 17 Fast forward/Rewind 18 Freeze the current screen 19 Previous/Next Remote Control 9 Remote Control Area The effective receiving area is about 3 meters with 30 angle from vertical point to the left and right. And the 5M effective receiving area is about 5 meters from the front of device. Note that the remote control signal receiver locates at the position of power indicator. 10 Connecting and Setting For safety, please do not connect any power supply before the external devices setup. 1. External Computer and Touch Connecting Audio IN VGA IN USB-Touch 1) Connect a VGA cable (15 pin) between the VGA and external PC. Connect an earphone cable between the PC and audio at the same time. 2) Connect a USB cable between the external PC and USB terminal. 3) Plug the POWER cord and switch it on from the rear panel. 4) Start up the external computer. 5) Press to turn on the panel. 6) Select Signal source to VGA source according to the one you connected. Note: The panel can connect with the external PC via HDMI. 11 2. AV Connecting HDMI IN 1) Connect a HDMI cable with the device with HDMI. 2) Plug the POWER cord and switch it on from the rear panel. 3) Press to turn on the panel. 4) Select Signal source to HDMI source according to the one you connected. 3. Video-OUT HDMI-out 1) Connect a HDMI cable with the device with HDMI. 2) Plug the POWER cord and switch it on from the rear panel. 3) Press to turn on the panel. 12 4. RS232 1) Connect a serial port cable with the device. 2) Plug the POWER cord and switch it on from the rear panel. 3) After connecting the central control system and unit, you can use some of the function such as power on/off or adjust the volume etc. RS232 code list Baud rate: 38400bps Stop bit: 1 bit Data bits: 8 bit Odd-even check: none Communication encoding: Hex code Function Power OFF Power ON SOURCE Up Down Left Right OK Menu Exit Info Mute Favorite Required Commands(Hex) 55 00 A0 02 F7 55 00 A0 01 F6 55 00 80 00 D5 55 00 00 01 56 55 00 00 02 57 55 00 00 03 58 55 00 00 04 59 55 00 00 00 55 55 00 14 00 69 55 00 16 00 6B 55 00 18 00 6D 55 00 1A 00 6F 55 00 1E 00 73 13 Sleep Mode Sound Mode Picture mode Set Sleep Timer Aspect Volume plus(+) Volume plus(-) Channel plus(+) Channel plus(-) Return Auto Scan Switch to DTV Switch to ATV Switch to Scart Switch to YPBPR Switch to YPBPR 2 Switch to VGA 1 Switch to VGA 2 Switch to VGA 3 Switch to HDMI 1 Switch to HDMI 2 Switch to HDMI 3 Switch to HDMI 4 Switch to HDMI 5 Switch to HDMI 6 Switch to DP Switch to OPS Switch to front HDMI Switch to AV 1 Switch to AV 2 Switch to SV Switch to USB Set Contrast Set Brightness 55 00 20 00 75 55 00 22 00 77 55 00 28 00 7D 55 00 4A 00 9F 55 00 4C 00 A1 55 00 0C 00 61 55 00 0E 00 63 55 00 10 00 65 55 00 12 00 67 55 00 0A 00 5F 55 00 58 00 AD 55 00 80 01 D6 55 00 80 02 D7 55 00 80 03 D8 55 00 80 04 D9 55 00 80 10 E5 55 00 80 05 DA 55 00 80 06 DB 55 00 80 07 DC 55 00 80 08 DD 55 00 80 09 DE 55 00 80 11 E6 55 00 80 12 E7 55 00 80 13 E8 55 00 80 14 E9 55 00 80 15 EA 55 00 80 0B E0 55 00 80 0A DF 55 00 80 0C E1 55 00 80 0D E2 55 00 80 0E E3 55 00 80 0F E4 55 00 2A 00 7F 55 00 2C 00 81 14 Set Saturation Set HUE Set Sharpness Set Color Temp Set Reduction noise Set BASS Set Treble Set Balance Set Language(0,1,2,3,,,,) Enter factory Menu Factory Reset Burning Backlight mode Screen shot VGA auto adjust Home WhiteBoard Resolution switch Audio Only Android Home Page 55 00 2E 00 83 55 00 30 00 85 55 00 32 00 87 55 00 34 00 89 55 00 36 00 8B 55 00 3A 00 8F 55 00 3C 00 91 55 00 3E 00 93 55 00 42 00 97 55 00 82 00 D7 55 00 84 00 D9 55 00 86 00 DB 55 00 88 00 DD 55 00 8A 00 DF 55 00 8C 00 E1 55 00 91 00 E6 55 00 93 00 E8 55 00 95 00 EA 55 00 97 00 EC 15 Journey 14 goes with completely new Android Interface for customization and quick-access. Add frequently-used apps on the home screen Signal Source Preview and Signal Source Switch System Help Whiteboard: Click to enable whiteboard function Browser: Built-in browser Application: Click to access more applications interface. Media: Click to quickly access image and video Settings: Click to enter the Android settings interface. Tap the circle to move or hide it. Long press corresponding App to delete it from home screen Click to unfold on-screen toolbar Click the center of System Help to unfold 5 shortcuts. Home: Return to Android home page. Mem Clear: Clear memory to speed up memory. Check: Click to check system status like Network status, OPS status, touch status and etc. A-Lock: Set password for apps. User only enters password to enable the app. S-Lock: Set screen lock password or patterns. Bottom-up Toolbar 16 The toolbar can be invoked in any signal source interface. Swipe up from the bottom of screen and it will appear. Buttons Functions Return to previous interface Return to Android home page Switch or end the running programs Change signal source channel Click to enter Menu Quick to annotate Slide to increase or decrease the volume Slide to increase or decrease the brightness Signal Source Selection There are three ways to select a signal source to display. Swipe your finger up from the bottom edge to bring up a toolbar then click
. 17 Press SOURCE button on the remote control. Press button on the front control panel. Green light indicates theres a signal and grey indicates no signal. Select a source and press OK or click the channel icon directly to enter it. Signal Source Interface 18 Android Settings Common Setting Click setting icon on toolbar to enter Android setting interface. Common function: Click Common function to set Sound, Brightness, Eye Protection, Startup and Shutdown, Screen Lock settingMulti-user, Wake On Lan (WOL), HDMI output format, Wallpaper and Screen Saver. Sound: Slide right or left to increase or decrease the volume. Brightness: Slide to adjust the brightness. Eye Protection: Enable eye protection function. Brightness turns dim when you touch the screen for 0.5s 19 and return to the previous status when your finger removes from the screen for 3s. Startup and Shutdown: Click to set on/off time. Screen Lock Setting: Set the time to lock screen automatically and password to unlock the screen. HDMI output format: set HDMI output to be 1920*1080 or 3840 * 2160. Wallpaper: Set dynamic or static wallpaper. Screen Saver: Set screen saver. Multi-user Account Setting:
Journey 14 provides Multi-user Account Switch functions. It allows users to install their own apps in their own accounts. Click Setting - Multi-user Create users to create a new account as shown as above. Click corresponding account to enter it or click delete icon to remove the account. Network Setting Network: Set WIFI, WLAN Hotspot, Ethernet, Bluetooth, Mcast, Proxy and etc. 20 Application Setting Application: Select corresponding apps to uninstall it. Note that you cant uninstall apps burnt-into the firmware. Storage Setting Click Storage to check internal storage and USB storage. Click eject icon to safely remove the USB flash drive. Date Setting Date: Where you can change time format, time zone and etc. 21 Language Setting Language: Where you can change the system or keyboard language. Factory Reset Reset: Erase all information and downloaded apps. You cant recover it. About Device About Device: Where you can check Android Firmware Version Build number. 22 Built-in PC Operation 1. Select PC signal source to enter PC interface. The following are three ways to select a signal source channel. Swipe your finger up from the bottom edge to bring up a toolbar then click input. Press SOURCE button on the remote control. Press button on the front control panel. In the signal source page, select a channel and press OK or click the channel icon directly to enter it. 2. Operate the built-in PC in the same way as you operate an ordinary computer. 3. Shut down PC before you turn off the panel. Do not power off a running PC suddenly to avoid data lose. Or you could also press Power button to turn off PC and panel at the same time. 23 Menu Click menu icon on the bottom-up toolbar. Menu pops up as follows. icon does not appear under Android signal source. Under menu, you can set image, sound and etc. Here provides some for quick-access. 24 Whiteboard Annotation Whiteboard is an annotation software preinstalled in the Journey panels. It features high speed annotation without any delay. Whiteboard Main Interface Whiteboard Desktop Mode Switch between whiteboard main interface and desktop mode Pen Eraser Select Undo Redo More Hide Clear Slide Management 25 Included Accessories 0 Picture Name Quantity
*1
*2
*1
*1
*1
*1
*1
*4
*1
*1 Remote control Magnetic Pen Pointer Power cable HDMI cable USB cable (A-B) Bracket WIFI Antenna Warranty card CD 26 Troubleshooting Remote control out of order Remote Control Check whether there is object between remote control and panel receiver;
Check whether the battery is installed correctly;
Check whether the battery is drained. Touch Touch does not response. Make sure infrared frames have not been obscured. Check whether you enable freeze function on remote control. OPS shut down automatically. Check if OPS is properly installed;
Sleeping mode setting;
Built-in PC Part of the handwriting cannot be displayed. Handwriting Use the pen rather than a finger to write. Hold the pen as far to the nib as possible. The angle between the pen and display needs to be greater than 60 degrees. Do not touch the display with your sleeve or wrist. Change the nib or use a pen with larger covering area. Check if infrared frames are obscured. Remove the interference source or change the using environment. No display or no sound Check whether the power plug is inserted into the power socket and whether the panel is powered on. Check whether the rocker switch on the interactive panel is switched on. No sound is played and no image is displayed. Check whether panel is in ECO mode. Check whether the video and audio input cables are connected correctly. Check whether the panel is switched to the right signal source. Check the settings on image brightness and contrast. Check the volume. Check the volume. Check whether the Mute button on the remote control is pressed. Check whether the audio cable between the PC and interactive panel is connected correctly. Image is displayed properly, but no sound is played. No image is displayed or the image is black and white. Modify the color settings. Check the color system. This is the general user manual for all QOMO interactive touch screens. Some details may be different from the actual product. 27 20C 25